Mass changes of BOM with ECM

Hi
I wanted to change into BOM by Cs20 Mass changes into BOM with ECR Number which is created throgh CC31 .
but system is not allowing me to do the same , pl tell me where is GAP.
Rgds
Pankaj Agarwal
Edited by: Csaba Szommer on Dec 28, 2011 10:43 PM

Hi Mario
For ECR i have done the same and even that is Released and also Status with ECO. but still System is showing the same.
Mario one more thing i have written on SDN pl have a look on Followup material , i have read about your post MRP-MPN.
we are also having the scenario of alternate Material Within the Bom and also wnat to be correct the Procurement Proposal.
how it will be helpfull by the MPN-MRP Set function.  i am also searching the same thing into Follow up Material . pl have a look on that.
yours reply will be highly appericiable...
Rgds
Pankaj Agarwal

Similar Messages

  • Mass change in bom

    dear experts
    how to add materials in mass change in BOM with CS20 or LSMW or BDC.
    regds
    prince

    HI
    Check  T code CS20 or thru workbench for CEWB you need to activate working area in OP77 select SAP_item .
    check this thread
    Mass changes for BOM Base Qty
    Regards
    Anupam Sharma

  • While trying to change a BOM with transaction CS02, a runtime error appears

    While trying to change a BOM with transaction CS02, a runtime error appears.
    In intial screen he entered material ,plant BOM usage and date valid from  after executed then id displayed item list in that he wantu2019s delete one item, he has been deleted selected item after that when he was saving he is getting runtime error
    Developer trace
    ABAP Program SAPLKED1_WRITE_CE4_BPS1                 .
    Source LKED1_WRITE_CE4_BPS1U01                  Line 30.
    Error Code SAPSQL_ARRAY_INSERT_DUPREC.
    Module  $Id: //bas/640_REL/src/krn/runt/absapsql.c#17 $ SAP.
    Function HandleRsqlErrors Line 775.
    RABAX: level LEV_RX_STDERR completed.
    RABAX: level LEV_RX_RFC_ERROR entered.
    RABAX: level LEV_RX_RFC_ERROR completed.
    RABAX: level LEV_RX_RFC_CLOSE entered.
    RABAX: level LEV_RX_RFC_CLOSE completed.
    RABAX: level LEV_RX_IMC_ERROR entered.
    RABAX: level LEV_RX_IMC_ERROR completed.
    RABAX: level LEV_RX_DATASET_CLOSE entered.
    RABAX: level LEV_RX_DATASET_CLOSE completed.
    RABAX: level LEV_RX_RESET_SHMLOCKS entered.
    RABAX: level LEV_RX_RESET_SHMLOCKS completed.
    RABAX: level LEV_RX_ERROR_SAVE entered.
    RABAX: level LEV_RX_ERROR_SAVE completed.
    RABAX: level LEV_RX_ERROR_TPDA entered.
    RABAX: level LEV_RX_ERROR_TPDA completed.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    RABAX: level LEV_RX_END entered.
    RABAX: level LEV_RX_END completed.
    RABAX: end RX_RFC
    In sm21
    Perform rollback
    Run-time error "SAPSQL_ARRAY_INSERT_DUPREC" occurred
         Short dump "090618 110101 donalda 11557 " generated
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
           Occurred on     18.06.2009 at   11:01:01
    The ABAP/4 Open SQL array insert results in duplicate database records.
    What happened?
    Error in ABAP application program.
    The current ABAP program "SAPLKED1_WRITE_CE4_BPS1" had to be terminated because
    one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
    neither
    caught nor passed along using a RAISING clause, in the procedure
    "RKE_WRITE_CE4__BPS1" "(FUNCTION)"
    Since the caller of the procedure could not have expected this exception
    to occur, the running program was terminated.
    The reason for the exception is:
    If you use an ABAP/4 Open SQL array insert to insert a record in
    the database and that record already exists with the same key,
    this results in a termination.
    (With an ABAP/4 Open SQL single record insert in the same error
    situation, processing does not terminate, but SY-SUBRC is set to 4.)
    How to correct the error
    The exception must either be prevented, caught within the procedure
    "RKE_WRITE_CE4__BPS1"
    "(FUNCTION)", or declared in the procedure's RAISING clause.
    To prevent the exception, note the following:
    Use an ABAP/4 Open SQL array insert only if you are sure that none of
    the records passed already exists in the database.
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "SAPSQL_ARRAY_INSERT_DUPREC" CX_SY_OPEN_SQL_DBC
    "SAPLKED1_WRITE_CE4_BPS1" or "LKED1_WRITE_CE4_BPS1U01"
    "RKE_WRITE_CE4__BPS1"
    If you cannot solve the problem yourself, please send the
    following documents to SAP:
    1. A hard copy print describing the problem.
       To obtain this, select the "Print" function on the current screen.
    2. A suitable hardcopy prinout of the system log.
       To obtain this, call the system log with Transaction SM21
       and select the "Print" function to print out the relevant
       part.
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, you can either use the "PRINT" command in the editor or
       print the programs using the report RSINCL00.
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.

    Hi ,
    you are getting beacuse u are trying to do mass update to database.
    Please check that below note are applicable to your system.
    Note 453313 - DBIF_RSQL_ERROR_INTERNAL for mass insert
    Note 869534 - AFS MRP doesn't work properly with all BOM item categories
    Thanks Rishi Abrol

  • Mass Maintenance of BOMs with Alternate Item Groups

    We plan to create BOMs containing Alternate Item Groups (+ usage probability + priority) to cover alternative parts usage.
    What is the SAP solution for Mass maintenance of BOMs with Alternate item groups?
    Is it possible to use (or customize) CS20 (or another transaction) to do following tasks in Mass :
    - identify the BOMs containing a specific material number (where used)
    - add a new item line with a new material nbr in the BOM (with same quantity, subitems, Alternate Item Group, ...)
    - when required, change the usage probability of the members of the group to set the new material usage on 100% and all other alternates usage on 0%. When not required, add the new one with 0% and don't change the existing members of the group.

    Dear.
    Ask your ABAP Team to write BDC or LSMW program.
    This will help you.
    Regards
    Utsav

  • Mass change of Recipe with Change Number for Future

    Hi ,
    I would like to do a Mass change of Recipes with Change Number for Future Plan,
    is there any way I can do that? or Transaction where I can get that info as I have to do it for lot of recipes,
    Regards,
    Paartha

    Rajesha,
    MM12 will get the change Number From CC01, where we define the Change Number for various things Like Mat master, BOM, Document etc,But I would like to Provude the ECN number when ever I change for example MM12(Mat master), CS02(BOM),CA02(ROUTING),C201(RECIPE), every time I can enter the same ECN number obtained from CC01 create change Master,you can see ECN number field on C202 screen also,
    so Now I would like to change Recipes by giving this ECN number for Mass change of one Filed called LAbor Hours inside C201,
    is there any way I can do mass change instead(avoid) of Process ,,,,,,,,, go to  C201 -enter ECN number--go in side change Labor hours for each and every recipe .
    Hope you understood,,, Looking for Reply from you and SDN Gurus
    Regards
    Paartha

  • Mass change in BOM - field "Relevant to sales"

    Hi All,
    How to do Mass change in BOM for the field "Relevant to sales" ?
    Thanks.
    Marianna

    Hi,
    Need to use CS02 recording in such a way that you can change every item in a particular BOM.
    e.g. First get into HEader Material BOM (CS02), once you've General Item Overview screen, do NOT directly go to item details of any item.... first click on tab-'Position', enter either Item Number or Component or both and then go to item details to change the relevancy indicator. Once changed for a particular item, save the BOM & come out of it. Then try for next item & so on....
    Again this is my initial thought, you need to try out few recording options like this and then chose the most suitable one. Take help from ABAP expert if any available.
    Off-course, initiallly it would take time to set-up LSMW but later on just need to create a data-file & do the mass changes.
    Hope it will help.
    Regards,
    Anup

  • Mass changes in BOM

    Dear Experts....
                            I want to delets some items from all BOMs.Items are specially tools having a matrial type ERSA. How to delete same items from all BOMs.
    Rakesh

    Hi,
    You can carryout the Mass changes of BOM using the Tcode : MASS.
    Where you need to select the object type related to BOM and perform the mass change.
    It can be done through CS20 and CEWB also.
    Hopwe this will help you.
    regards
    radhak mk

  • Mass change of BOM item and BOM item catergory

    Hello Everyone,
    I have a need to complete a mass change of a BOM item with another, usually I use transaction CS20,this works o.k. but this time I'm also changing the material with a new item catergory, for example a stock item with a phantom item.
    Does anyone have an idea how to complete this task.
    Kind Regards
    Frankie

    Hello,
    Thankyou very much for your reply.
    I did try adding the new material using CS20 but all the BOM qty's are different and as you know you have to complete this field, so it would mean changing one at a time, I attacked this issue from a different angle and created an LSMW so I can Mass delete the parts but then use this program to change the BOM item to the new part.
    Thanks again for your reply
    Kind Regards
    Frankie

  • BOM with ECM

    we have configurable product. At every order receipt we create sales order and the respective project BOM i.e Sales order BOM ( Order BOM ).
    Many times we receive amendments in customer specifications and we implement it in Master data ( i.e in Drawing , BOM etc ). We communicate all the changes  through Email and excel sheets. But We feel its very difficult to have track of all the amendment in Email and excel , so that we want to use SAP change management phenomenon through we can create change request and the same request will flow through the complete Supply chain.
    We also want these change management number link with the respective project sales order for record .
    Regards,
    SAP CONS

    Hi,
    yes note 1278790  really solved my problem
    Thank you very much.
    Best regards,
    Freddy Ha

  • Mass change in BOM status to inactive

    Hi,
    I want to change the status of BOM Alternate header to inactive. I want to do the same for some 1000 BOMs in one shot. Is there a way to do the same.
    Please suggest

    Hi,
    You can use CEWB to make it inactive.
    or
    Create a BDC using CS02.
    Regards,
    Vishal

  • Mass change of BOM

    Dear experts,
    I want to change BOM for lot of material
    For that I want some procedure
    I tried CS20 but no use.
    Plz give me some solution
    Regards,
    sameer

    Hi,
    Using discontinuation indicator also you can achieve this.
    Need to define the simple discontinuation or parallel discontinuation. Need to define the follow up material also. By doing this automatically the system will replace the material.
    Regards,
    V. Suresh

  • Error while changing BOM with change number

    Hi ALL, Please help me with followed error message, I am using ECM. I created ECR and converted to ECO and then released.
    Object management record cannot be generated
    Message no. 29046
    Diagnosis
    You want to change the BOM with the entered change number.
    One of the following situations triggered this error message:
    1. The indicator that allows automatic generation is not set for object type BOM in the change master.
    2. The indicator generation only on initial creation is set for object type BOM
    3. You are processing a change request.
    System response
    The system checks whether the indicator object management record will be generated is set in the change master.
    If the indicator generation only on initial creation is set, the system checks whether the BOM exists in the system.
    Procedure
    If you are authorized to change the change master, execute the following steps:
    For 1.)
    Set this indicator for object type BOM or create the control record in the change master.
    For 2.)
    If the BOM already exists in the system and the generation only on initial creation indicator is set, the system can no longer generate the control record automatically.
    In this case you have to add the object control record to the change master first, then you can change the BOM in relation to the change number.
    For 3.)
    You cannot generate any object control records for a change request.

    Hi
    With your question regarding changing BOM with change number  it looks lke there may be problem in defining the Object types,objects.Moreover whenever converted to ECO you need to enter into cs02 tcode for changing the bom with relevant change number and valid from date.
    Hope this gives you a clear idea.let me know if you need anyfurther inputs.
    Regards
    Praveen

  • Material BOM mass change error

    Hi gurus,
    When doing mass change of BOM via tcode CS20, i'm getting below error result.
    The following messages were displayed:                                                                               
    Material BOM 00016478 : Delete Item(s)
       19760                                  STM-220-(20UP)78DZ*C06U029(XC06U029)Sn 200
       0130 L 01/01/2002 12/31/9999              1.00  PC     >               1.00  PC
       No batch input data for screen SAPLSDDT 0010
       Folder created/extended
    I wonder what does "No batch input data for screen SAPLSDDT 0010" mean? what should i do to correct this?
    I also noticed that all items on the picklist were grayed out though i can still click on the checkbox button to select the items that I want to be deleted.
    Has anyone encountered this problem? I usually use CS20 during BOM mass change and haven't encountered this kind of problem.
    Hope to hear advise from you all on how to deal with this.
    Thanks and regards,
    Chad

    Dear,
    Error message no is 00344 ?
    Please refer the OSS note  Note 493096 - CS20: No batch input data for screen SAPLCSDI and   Note 180686 - For CS20
    Regards,
    R.Brahmankar

  • Mass changes of Material Master field with different values

    Hi,
    How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
    Thanks,
    K R Vishnu Kumar

    Hi Kumar.
    I think you have to use LSMW for mass updation for Material Master fields with different values.
    Regards,
    Rahul.

  • Authorization to change BOM with history requirements

    Hi Techies,
    I m facing an issue now with respect to authorisation of changing BOM with history requirements. Our quality system was a copy from a production server which was used for CRM before. Usually in SAP when we change a BOM with a change number we cant again change it back without a change number.
    In our case it is not providing an error but it is providing a warning. Now my requirement is to change this warning message to error message. So that people wont change BOM without a change number.
    I tried to enter the transaction SU24 and found the authorizaton C_STUE_NOH with proposal YS. Then i tried to change the filed value to ' ' (NO) and saved it.
    But still i m not able to change the warning message to error message.
    Is there any other setting i need to carry out for this.
    Please help me with this issue.
    Thanking you in advance.
    Regards,
    Kris.S

    Dear Krishu,
    Below has been mentioned in OSS note: 420878. Check once again you have save as NO. Then go to tcode SU03 Object Class PP/ C_STUE_ROH
    Summary
    Symptom
    In Customizing of the BOM, the history requirement is set or a BOM requires a history. Despite this, it is possible to process BOMS without engineering change management. The system only processes a warning message (29 045) which can be skipped.
    Additional key words
    CS02, change number, OS27, W045(29)
    Cause and prerequisites
    Authorization profile
    Solution
    Check the authorization profile of the respective user.
    Example:
             C_STUE_NOH <OBJ>
                &_SAP_ALL    <AUT>
                    NOHIS      <FLD>
    would have the authorization to process BOMs requiring history without a change number. In this case, if you change '*' to ' ' in NOHIS, you will no longer receive a warning, but rather an error message.
    Regards / US

Maybe you are looking for