Mass conversion in master data

i want to change mass conversion in item data in r3 assuming no transaction is done till now.Suppose there are nf items and i want to make additional purchase unit say kg and ikg=---pieces that is base unit,no transaction is done till now in these codes.
regards
vikas

Dear Peai,
Since you working with 4.0B version ,I dont know what T code is used for that
version to carryout mass change,but try with this.
Goto T code SE93,give MM* in the input field and press F4,you will get list of T
codes used for materials related.
After getting the list of T codes,check whether any T codes suits for your
requirement.
Regards
Mangal

Similar Messages

  • Problems with new fields added for tc MASS for material master data.

    Hello to all.
    We created new fields in MARA table and added to the process of the tc MASS. We made the following steps and it almost works correctly:
    1-Add new fields to the object ZBUS1001, copy of bus BUS1001.
    2-Add new fields to table T130F
    3-Add new field to structure E1MARAM.
    4-Add new fields to structure CL_MMH1.
    5-Add new fields to structure MARA_TMP.
    6-Created a function module to control that the new fields not filled in MASS have a "/" value.
    If we run the mass for our objetct ZBUS1001 and put a new value or modify the value of new fields, the tc MASS works correctly.If we want to delete a value leaving the value empty,click to the carry out a mass change button and save the change, the system don´t delete the value and keep the first value.
    Do you know what the problem is , and what step we didn´t make it.
    Thanks in advance.
    Edited by: tonnetti pablo on Feb 6, 2008 7:45 PM

    Hi,
    Check ZTERMDT is checked under Attribute list as below.
    Hope it helps..
    regards,
    Raju

  • Mass Download/Extract of BW Master Data Documents

    Hello
    I am looking for a solution to enable a mass extraction of Master Data Documents on a nightly basis.
    Basically we are storing documents against materials in R/3 using CV03n, we are then using the Mass Upload Program to load these into BW on a nightly basis and store them against the master data as a document.
    The documents will be used for reporting internally, but there is also a requirement to extract this on a nightly basis to external sources as a csv file to be used as an internet feed.
    Does anybody know of a program or FM which will allow this, or any other way of extracting?
    Any help would be greatly appreciated.
    Thanks
    Daniel

    Hi Manfred,
    Unfortunately the documents are stored independently of the info-object so you can't use an infospoke to extract the data.
    Also it looks as though the document is not physically stored in a table on BW, only links to the document name and properties.
    Thanks
    Daniel

  • Sites Master data mass maintanence

    Hello All,
    I was wandering if you know if there is any tool to mass maintain sites master data.
    As i know there isn't any but i would sure love to be wrong.
    Cheers
    Idan

    Hi Idanbianco,
            The only thing that comes to my mind regarding mass maintenance of sites is WB30 which is for MC-Sites mass maintenance.
    I am afraid anything else is available since there are no standard object types available as well for mass maintaining Site Master.
    Hope it helps
    Best Regards,
    Aram K.

  • Mass Re-Read of PP master data

    Hi
    Is there is any transaction or Way to have MASS  reread PP master data in Production orders?

    Dear Mayuresh,
    Its not possible in standard SAP,as there is no T Code to perform the same.
    check this link,
    Read PP Master - Mass processing
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Jun 5, 2009 3:31 PM

  • QM master Data copy from one client to another client

    Hi QM guru...
    Kindly suggest me how i will copy all  qm master data  from one client to another client
    QM master Data like....Catlogs. MIC inspection method. sampling...etc
    Kindly suggest me how i will copy all master data
    Thanx
    Regards
    Akil

    Dear Akil,
    I think that LSMW can be of help in this case.
    Otherwise, please check with your ABAPer whether any BDC is there for mass uploading of master data.
    Regards,
    Kaushik

  • Read PP master data in order

    Hi...
    I have one query reference to Read PP master data in order.
    Can we read PP master data in the orders at plant level in mass processing?Or any other alternative...?
    Regards
    Tushar

    Dear There is no T Code in standard SAP to read the PP master data in mass.
    You need to develop a LSMW or BDC solution.
    Please refer below thread for more information.
    MASS read PP master data
    Cheers
    KK

  • Mass Upload Documents for Master Data in BI 7.0

    Can anyone confirm that the 'How To' document for uploading mass documents is still valid in BI 7.0 SP 15 (it was stated for 3.0B SP7) or suggest another way to do this?
    The business requirement is to upload numerous image files as BW: Physical Class Master Data documents for 0MATERIAL. It would need to also set the Log.Doc.Property of Document Type = value.

    This code does work in BI 7.0 SP 16, with a small alteration.

  • Interface and conversion testing of SAP environments with Master Data

    Hi guy's
    Please let me know if some one of you know about SAP Conversion Project. Below you have more description:
    - testing of Interfaces from Legacy Systems
    - testing of conversion programs used in the conversion or transposition of data from legacy systems
    - data cleansing activities associated with conversion
    - identify and populate various SAP environments with Master Data necessary for both conversion and interface testing
    Any detail info in that and what kind of knowledge you need to have in some of project will be useful.
    Thanks in advance
    Adeel

    Hi Yannick,
    I am trying to do the exact same thing. Have you gotten any further on this issue?

  • Master data conversion

    Hi its very very urgent. Can anyone tell me about master data conversion. I dont know anything about it, all i know is its done through legacy system migration work bench. Please send any links or doc regarding it.
    Thanks in advance.
    I appreciate you help.

    http://www.sapgenie.com/saptech/lsmw.htm
    http://www.sap-img.com/sap-data-migration.htm
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    Regards,
    Rich Heilman

  • HR Master Data conversion-SAP Best Practices

    Hello there,
    We would like to use the SAP Best Practices for HR Master Data conversion. 
    Now we want leverage the SAP Best practices to convert the Master data.  Could any one explain in detail how to do the same.
    How to install the Best Practices only to the extent of the Data conversion.  We don't want to use the rest of the Best Practicies.
    I know there are some notes out there. 
    Any help on the above highly appriciated.

    HI,
    I am not v sure if u can install only the required component. But there would be some pre requisites for every installation.
    It will be clearly mentioned in the base line
    Also Check if its available for the country which ur currently working...
    Use the ECATT: Test Configuratio & Test Scripts
    Pls revert in case u need further more details..

  • Requirement in conversion of material master data

    i have a requirement in conversion of material master data, what do i need to do in this, do i need to use the LSMW or BDC for this scenario can any one help me in this issue.

    Hi Rocky,
    You can go for either of these two methods.Conversion in the sense you are going to create one upload program for MM01 and will upload the data using the program
    But I suggest go for BDC.Because in LSMW you can not capture all the views for material master.
    I am writing steps(BDC recording) for this.Just follow if helpful:
    1.Go to SHDB t-code.
    2.Press NEW RECORDING
    3.enter recording name,Transaction code(MM01) and then press Start recording.
    This will take you to the transaction MM01,please enter the test data given by your functional consultant.Also select the views that required by client.
    4.After recording save it.
    5.After saving press program button from the menu.
    6.This will take you SE38 with the recording code.
    7.Then you do as per normal BDC program,declare internal table and map with the uploaded fields.
    Shout me for further clarification.
    Reward if helpful.
    Thank you.

  • SD Master Data, 3rd party sales, SO Conversions?

    Hello,
      I am new for the Blue Prints prepartion, Will anyone guide me please for the preparation of SD Master Data, Pricing,3rd party sales and Open Sales Order Conversion for Blue print Preparation.
      If you send me an URl / Document format,  it helps me a lot.
      [email protected]

    Hi,
    I think for blue print preparation, you need to identify the fields involved in the process, like if pricing or 3rd party, identify the required fields. After that create a template for data.
    There is a youtube video on Master data in blue print, please check.
    Thanks.

  • Extending Mass Customer Master Data

    hi,
    We have created a  new sales organization and for that i need to extend all the existing customer master data for this new sales org.
    Is there any t-code where i can extend mass  customer master data or i have to do this by LSMW.
    regards
    debasish

    You can use a BDC for that, take the help of the abaper and it does not take that much effort.
    LSMW you need to execute 14 steps those are cumbersome.
    Chk out the following link for how to create a BDC (For Material Master)
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d62292b3-0301-0010-df98-aaac31cd4a41
    Regards,
    AK

  • Mass change of Asset Master data

    Hi!
    Is there any transaction code for mass change of asset master data. I need to change Depreciaiton start date for all assets?
    regs,
    Ramesh

    Use OA02 - Mass change, create a substitution. Add in all prerequisites and save it.
    Go to AR01, execute it for the list of assets to be changed and create a worklist for the same.
    Execute the worklist in AR31 and refresh it till all changes are completed.

Maybe you are looking for

  • How do I move time machine backup on filled time capsule to  external disk

    TIme machine backups from imac and mbp are currently on 1TB time capsule running out of space. I want to split the time capsule and move just the imac backups to a new external drive which I want to share with a new macbook air. The new external driv

  • Commitments at activity level in report S_ALR_87013533 - Plan/Actual/Commit

    Hi All, When i executed the report S_ALR_87013533 - Plan/Actual/Commitment/Rem.Plan/Assigned, the commitments are shown at WBS level but not at activity level. Is there any setting required to see the commitments at the activity level? Where as the p

  • Converting Photoshop Album 2.0 to Elements 13

    Anyone know how to import my catalog from Album 2.0 to Elements 13? Elements does not recognize my catalog files. Thanks

  • IPhone 4s cover flow slow down and jerky help

    Hi all i have copied my music over from my backup 3GS to iPhone 4s but in cover flow it is very very jerky and not as smooth at all, my 3gs is way smoother an much better than on the iphone 4s it even has problems loading the covers up as there is a

  • Undownloaded podcasts marked as unplayed

    I'm on Windows 7. After installing iTunes 11.2, a heap of old podcasts from my subscribed podcats have been marked as unplayed - 1,500 so far. These are podacsts that I have not downloaded and I don't want to listen to (about 500 are old 'Stuff you s