Mass creation of BOM and Master Recipe for Plants

My client wants to do Mass BOM creation and Mass Master Recipe Creation from a Generic BOM and Generic Master Recipe for all 10 Plants by just a click of button.
He does not want to use copy function using CSO1 or C201, and do for plants 'one by one'. He finds it very time-consuming. He wants to copy for all ten plants all at once. Please advice how this can be accomplished in the best possible manner, and if by standard SAP.
Thanks,
Sac

Dear Sir ,
What is LSMW ?
I want to Copy some bill of material from another plant .I had used T code CS01 for it but only the header bill of material is copied .
The copy field in CS01 is only for first level boms the subsequent Boms are not copied .
so is there any other way to do it ? if possible please give the detail procedure .
Regards
Pankaj .
Edited by: pankaj.001 on Mar 9, 2011 10:55 AM

Similar Messages

Ways to secure BOMs and Master Recipes - Reg

Hi ,
Our requirement is to secure certain Bills Of Materials and Master Recipes .
Request inputs from the experts to achieve this . We need to maintain certain BOMs and Recipes such that they are secured and handled by few set of people . I understand we can try doing this with some authorization object at BOM for changes etc.. but are there better ways to secure ?
Regards,
Madhu Kiran

Hi ,
Our requirement is not to restrict changes to BOM , Recipe and track with ECM .
Its a kind of restricting few for the access of BOM , Recipe for which there shall be some kind if a solution using authorization groups creation and mapping . Currently exploring at our end on the same and would be grateful if some one could provide better advice /methods .
Regards,
MK

Regarding creation of BOM through Master Recipe

Dear all,
I am trying to create a BOM but system is giving a message as BOM can be created through Master recipe only
Please guide me where do we set this and what is to be done to avoid this
Regards
venkat

Hi,
Refer the answers from thread mentioned below.
Re: BOM can only be extended via Master Recipe
Regards,
Lodhi.S

Planning for product using multiple bom and multiple recipe involving SOP

Hi friends,
The problem. Currently we have maintained single BOM and single recipe (The BOM and Recipe used for MRP) for long term planning run. The FMCG sector of Client requested to have multiple BOMs and multiple recipes in the long term planning run. I.e. The planning is done quarterly and they wanted to use different BOMs and Different recipes for each quarter. But since the existing system has configured to use a single BOM and a single recipe we have a problem to use the long term planning run with the current setups.The problem we have is in this 001 planning scenario.
appreciate if you can help me how to accommodate multiple BOMs and recepis in the long term planning run.
thanks and regards
om

HI Mr. Ready,
We create PIR though a submit Job and in this case how to mention the production version while creating PIRs . Also if I am creating PIR through MD61 how to record the version.
Please advice.
Thanks and Regards,
Om

Creation of business and technical systems for sld

hi
can any one help me out, to creation of technical and business system for system landscape directory ....give me detailed instructions.
this is urgent requirement
regds
venky

Hi pervalli,
plz look to
http://help.sap.com/saphelp_nw04/helpdata/de/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Regards,
Udo

WIP Mass Load - Update BOMs and Routings on Unreleased Jobs

I would like to be able to refresh the BOMs and Routings that are used by Discrete Jobs that are currently in status Unreleased. I would like to do this before I run MRP to ensure that any jobs marked as released during planning process have the most update to date BOM and Routing attached.
I have tried to use the WIP Mass Load to do this by updating the Bom Revision Date and Routing Revision Date. Although this works in the Forms, when this Revision Date is updated via the WIP Mass Load,the BOM and Routing information remains the same.
do I need to do something to trigger the change to BOMs and Routings on this Jobs via WIP Mass Load?
I would appreciate any help on this subject.
Thanks
Barbara

I think you may be able to use the Engineering Change order (ECO) functionality of the Engineering module to accomplish this. Even the BOM module contains some of the functionality.

Best production version and master recipe?

Is there a way in SAP (ECC.5.0) to choose the best production version on its own besides the date?
Can MRP choose the best production version and master recipe on its own based on cost?
If so How? Config?
Please advise
thanks
Walter

Hi,
    MRP selects production version based on   Lotsize,Validity date and status.In R/3 ,we dont have functionality like
   1. Simultaneous MRP and Capacity Planning
   2. Best Optimum route of production.
This is very much available in APO only. You can use either of Quota arrangement or Capacity evolution functionality to distribute planned qty into other resources based on past experience.
Regards,
Velmurugan S

Another account user is using my apple id as their rescue email. Apple know this but expect me to contact him directly rather that let lim know his error. Seem strange and a recipe for conflict. What do you think?

Another apple account user has put my apple id as their rescue email. Apple know this but expect me to contact him directly rather that let lim know his error. Seem strange and a recipe for conflict. What do you think?

Primary and alternate email addresses need to be verified but a rescue email address doesn't, it can be added to an account and used without being verified (you will get a verify button when adding/changing it, but the system doesn't force it to be verified). I would hope that the person using the email address as their rescue email address will notice that they aren't getting reset emails and that after contacting Support to get their security questions / password reset he/she will check what they've set it to and change it. The OP won't be able to log into the other account as he/she won't know its primary or alternate ids.

Reg:Opening and Closing Stock For Plant

Hi All,
i want to calculate the opening stock and closing stock for plant wise for the given Posting Period Date.
Am having the opening balance and closing balance for all months but i need it as month wise.
considering this example,
the date is from 15.01.2010 to 15.03.2010 and for one plant
considering this example,
am having the opening stock from as 15.01.2010 to 15.03.2010 as 10,000 and the closing stock as 15,000.
but i need in month wise like below,
from 15.01.2010 to 31.01.2010 what is the opening stock and closing stock?
from 01.02.2010 to 28.02.2010 what is the opening stock and closing stock?
from 01.03.2010 to 15.03.2010 what is the opening stock and closing stock?
this is purely based on plant wise and not material wise?
could anybody say clearly how can i acheive this scenario?
i have referred MB5b,mc.9 transaction programs but still confused how to go with plant wise for a particular period?
Thanks & Regards,
Suresh
Edited by: suresh suresh on Mar 24, 2010 10:15 AM

Hi,
Refer to link below:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c1/3766e7449a11d188fe0000e8322f96/frameset.htm
Regards,
Venkat.

I need to display planned quantity and actual quantity for Plant in quarter

Hi,
   I need to display planned quantity and actual quantity for Plant in quarter AND month wise as below.
                                                                Q1                              Q2 .......                              M1                                       M2 .........................................
PLANT    MATERRIAL    UNIT     PLTY   ACTQTY          PLTY   ACQTY                   PLTY   ACQTY                    PLTY   ACQTY
P1            M1                      EA        20        15                      30       25                             40       35                              50       45
P1            M2                      EA        20        15                      30       25                             40       35                              50       45
P2            M2                      EA        20        15                      30       25                             40       35                              50       45
I will keep plant and material infoobject as row. Can you please suggest how i should design column section to display like above
Regards
Deep.

Hi Deep,
Assuming you have an InfoObject for Quarter (say 0CALQUARTER) & Month (say 0CALMONTH), drag the Quarter InfoObject & Month InfoObject below in the Columns. Drag your KFs i.e. Planned Qty & Actual Qty below the Month InfoObject to form a KF structure. If you don't want Qty Unit to be displayed alongside your KFs, use NODIM() function & display Unit in the Rows.
--Priya

Maintenance activity type and order type for plant maintenance order

How can i get the maintenance activity type and order type for a given plant maintenance order. Please let me know the table where i can get these two fields
In AFIH i can only get the MAT for an order number

Maintenance activity type -
AFIH - ILART
Order Category Indicator Plant Maintenance -
AFIH - AKKNZ
reward if heplful

Creation of MKK and Contract Account for New CRM Roles

Hi Experts,
I need a help in CRM for creating new roles and extending the same in R/3 in MKK role.
Here is the problem I faced.
I have copied the CRM000 role and created a new role ZCRM00 for
business specific need. It is getting created in CRM and a BP is also
getting created in R/3 BP but it is not creating an MKK Role in FI-CA.
The following steps can be used to simulate the problem
Step-1: Create a BP in CRM with the ZCRM00 role. Please do not
extend or create the BP in Sold to Party Role. Because if the BP has
Sold to Party role then the problem will not occur and Business does
not want to have s in Sold to Party roles because customers will
be having Sold to Party Role
Step-2: Create a Business Agreement for that BP
Step 3: Go to R/3. Run Transaction FPP3 and search for the BP created
in role. The system throws the message "usiness Partner <BP
Number> does not exist in the MKK Role".
Step-4: If you go to the transaction CAA2 and enter the Contract
Account Number (Appearing in the Business Agreement Tab of BP Business
AGreement Tab in CRM) and the BP Number the system will say "Business
Partner <BP Number> does not exist in the Contract Partner.
I have already executed the steps mentioned in OSS Notes 632749 but it did not result into anything.
Can anybody please help me to create the MKK role and Contract Account in R/3 for the newly created role in CRM. I understand this thing works fine for the Sold to Party role in CRM. I believe when SAP has given the flexibility to create new role in CRM, there will be some way to create the MKK role and contract account automatically (very much like Sold to Party) in R/3.
Looking forward for your reply
Regards
Karthi V

Hi,
Can you please guide us if you were able to resolve this issue and you were able to assign the MKK Contract partner role for the custom BP Roles.
Thanks,
Vamsi.

Regarding creation of bom and material in cfolder

dear gurus,
i want help from all of u.
can any one tell me , what is the benefit of creating BOM / material in cfolder instead of R3.???????
full reward points for useful answer
thanks
[email protected]

Hi,
cFolders is a collaboration tool (tool used for talking to 3rd parties outside your company.)
Usually you will not give access to your ERP system to others. In that case you use cFolders as medium of sharing information with others.
if the 3rd party colleague want to suggest some improvements or modify you design documents etc., he can do it in cFolders. This then can be verified by you in cFolders (once modification is done he can change the status in cFolders which will trigger a notification to you ) then import it to cFolders.
regards
Murugesh

32-bit support for CS5.5 Production Premium and Master Collection For Trial

Where can I get 32 bit version of Premier Pro for trial?

CS5.5 Production Premium & Master Collection (Windows) include 32-bit Premiere Pro CS4 & After Effects CS4: http://adobe.ly/n3Z4i4

Mass upload of characteristics and long text for Object Links in DIR

hello all
I want to upload characteristics and long text of Linked Objects in Documents: i wanted to use BAPI_OBJCL_CHANGE and family but, it is a class that is on a different level than the DIR as it does not belong to the DIR directly, but to objects that are linked TO the dir, via the tab linked object.
any idea on how I can do that?
LSMW and recordings do not work (or at least I did not find a way to make them work);
have you encountered such a situation?
thanks

Dear,
After call BAPI call also
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING wait = 'X'.
Please refer this thread also,
BAPI_OBJCL_CHANGE.
Regards,
R.Brahmankar

Mass creation of BOM and Master Recipe for Plants

Similar Messages

Maybe you are looking for