Mass creation of info records

Hi,
As the supplier for one of the material type is changed, user wants to create a info records for all the materials of this type against this vendor. Is there any transaction available to create info records for all the materials against a single vendor at one go?
MEMASSIN is not useful as it is only to update or change existing info records.
Regards,
Krutika

Hi Krutika,
You can create mass info record through LSMW.
Regards..
Trupti

Similar Messages

  • Error during creation of info record for pipline material.(Urgent)

    Hi All,
    We are getting the following error during creation of Info record for pipeline material
    " Material XXXXX is not a pipline material"
    we have checked the material master  and found it is a pipeline material.
    Kindly advice on the same.
    Help in any form will be rewarded.
    Best Regards
    Arihanth

    Hi Arahanth,
       The steps u need to check are;
    1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
    2) when u create the info record (ME11) ensure the info category is selected as pipeline.
    Hope its clear to u
    if solved do reward me points
    Regards
    Anil Thai

  • Automatic creation of info record

    Hi All ,
    In my case, Automatic creation of info record is active during creation of PO and in case of standard PO,  price is automatically coming during creation of PO
    But in case of consignment PO, Price is not coming automatically.
    Please help...  thanks in advance

    HI,
    In Consignment PO, Price (Condtion tab) won't be there.
    As per the concept of Consignment, stock will be in our premise but ownership of the stock will be with the vendor. Only when we consume from the consignment stock it will come under our valuation & the price maintained in the consignment info-record will used in this case.
    Refer help.sap documentation for more details on Consignment.
    Thanks & Regards,

  • Creation of Info record

    Hi ,
              I need to create and change the info records automatically from excel.(ME11).
    Is there any BAPI for this or we need to do only in BDC technique.
    Can anyone guide me in this issue.

    Hi Ramya,
    Try with below FMs
    ME_DIRECT_INPUT_INFORECORD
    ME_POST_INFORECORD
    ME_UPDATE_INFORECORD_PD.
    There is not much validation being handled in this FMs so it may upload wrong data as well .. which may create problems..
    No BAPIs available for creation of info records (ME11)
    I would suggest you to go for BDC in this case..
    [Link for BDC Example|FM or BAPI For uploading data in ME12 transaction;
    Hope it will solve your problem..
    Thanks & Regards
    ilesh 24x7
    ilesh Nandaniya

  • Mass upload for info records when price gets changes

    Dear All,
    How to do Mass upload for info records when price gets change.
    Regards,
    Bhargav

    Hi Bhargav,
    Please upload the present price (Map) by  LSMW . When you are doing the transactions  then automatically by selecting option info update price will be updated the  info record in Order Price history
    Regards
    M B Raju

  • Mass updating Purchasing Info Records, EINA-IDNLF

    I need to update the manufacturer's part number on the purchasing info recs for a couple hundred thousand materials, EINA-IDNLF.  What would be the best way to do this?  IDOC INFREC01 perhaps?
    Thanks for any help!!
    Regards,
    Deb

    Hi Debra,
    To accomplish mass maintainence of Info Records in TCode MEMASSIN. <b>** Please proceed with caution as you're about to change a considerable number of database records at once.
    </b>
    Select your particular field and in the next screen, do a multiple selection (button with a yellow arrow) and carefully select the vendor materials you want to do the mass maintainence for the appropriate info records.
    Let me know if this helpled

  • Error in mass change for info records -MEMASSIN

    Hello Friends,
    We want to mass change the info records. We want to set the "Unlimited del" indicator to all the Info records which is not there currently.
    When we tried to do the same, we came across an error saying  -
    "5300177458 : Enter Purch. Group (5300177458)" ....message type ME083.
    but purch grp is maintained in all the Info records.
    Can anybody help us to fix this issue ?
    Thanks in Advance,
    Vidyadhar.

    Hi all,
    Thanks for your inputs.
    1st thing - pur grp is maintained in customizing also. ..not deleted in customizing.
    2nd thing - in MASS trans selection, I selected pur org, plant, and unlimited del options....still its giving me the same error.
    any other solution pls ?

  • Mass Delete Purchasing Info Records

    Is there a way to flag a standard info record EINA-LOEKZ in mass maintenance MEMASSIN
    for several materials across several different vendors?
    I can select EINA-LOEKZ in MEMASSIN then choose selection fields and pull down the material and vendor.  But I dont see an option for purchasing org., or plant?

    Hi,
    Use this transaction to delete a Purchasing Information Record. An information record contains information tying a specific vendor to a material or material group.
    Menu Path
    From the SAP R/3 Screen, select the path:
    Logistics >> Materials management >> Purchasing >>
    (new menu) Master data >> Info record >> Flag for deletion
    Or use the transaction code --> ME15
    http://web.mit.edu/sapr3/windocs/bpmds09m.htm
    Regards
    Sudheer

  • Validity date of condition records (creation of info records using LSMW)

    Hello gurus,
    we would like to create info records using LSMW with one condition record (PB00). This works fine, we just are not able to influence the validity of the condition record, it's always "creation date until 31.12.9999".
    We tried to maintain the fields BKONP-DATAB and BKONP-DATBI, but that did not change anything.
    Any ideas on this?
    Thanks
    Alicia

    Hello Jürgen
    and thank you!
    One additional question: When I import info records using LSMW, one condition record (PB00) is created automatically. Is it possible to change the validity of that condition record using LSMW, too? Or can I only create new condition records?
    Thanks again
    Alicia

  • Error while doing a mass change in info record

    Dera Experts ,
    We are getting the following error while settin g the complete deletion indicator for a purchase info record through t code MEMASSIN.
    Communication block for info record incompletely transferred
    Message no. 06327
    Diagnosis
    Internal error.
    Procedure
    Please inform your programming department or system administrator.
    We are able to mark the deletion indicator maually through ME12 T code .
    Please suggest what coiuld be wrong ?
    Regards
    Anis

    Hi,
    I have searched and could not find any information related this error in the transaction you use. I suggest that you open a ticket at SAP, so that an expert can have a look into your system.
    Best Regards,
    Arminda Jack

  • BRFplus and creation of info record and source list

    Hi there.
    I would like to use BRFplus to fill out MM values and after that automaticly create info record and source list for this MM record. The first step is ok, but creating IR and Sourcelist I am not sure. What is the best way to do so?
    -> Calling FM? If so how should I use the Result Data Object and Dispatcher field in BRFplus?
    Thanks in advance.
    Per Zanchetta

    Hi,
    Yes could call FM using BRF+ Procedure Call-Function Module. And map the exporting parameter (results of FM) to BRF+ ruleset parameter and do the further processing.
    When you assign FM name then in below container UI you can add all required parameters using "Add Parameter" button.
    regards Tiwari

  • PO creation error - Info-record

    Hi All,
    I am trying to create the PO for a particular material,but i am getting an error on saving the PO.
    "Please contact the responsible person for Info-rec"
    The Info-record for that material for that vendor is present when i checked in the t-code ME13.
    what could be the problem ?please suggest.
    Thanks in advance,

    The info category means whether its for Subcontracting, consignment, standard or consignment.
    So check the same.......and if you havnt maintained for any of the categories then maintain it. But befor it let us know that when are you getting this error...while creating consignment PO or what ?
    Regards,
    SS

  • RESTRICT PURACHSE ORDER CREATION IF INFO RECORD IS NOT MAINTAIN

    HI,
    I WANT TO RESTRICT THE USER FROM CREATING PURCHASE ORDER (ME21) IF HE HAS NOT UPDATED THE INFO RECORD FOR THE SAME.
    I WOULD LIKE TO KNOW WHAT ARE THE FIELDS EFFECTED FROM WHICH TABLE AND HOW TO DO IT.
    WHAT I KNOW IS INFO RECORD (ME11) AFFECTS EINA TABLE, BUT HOW TO RELATE THIS WITH P.O .
    PLEASE HELP ME.
    THANKS.

    Thanks

  • How to influence automatic creation of Info record

    Hi friends,
    I need to avoid copying of a field when an info record is automatically created after saving a PO.
    Can you advice a user exit to perform this?
    thanks
    Pavel

    hi
    please check below threads
    PO without Info record Updation
    Info record created in automatic?
    regards
    vijay

  • MASS CREATION of new inforecords and loading it in mass

    Iam new to SAP MM .can anyone please let me know
    1. what MASS CREATION OF NEW INFO RECORDS MEANS. Is it somethnig other than creating the info record using the TCODE ME11?
    2. what LOAD INFO RECORD IN MASS means?

    Hi
    Mass creation of info records means, if you have more than 50+ records needs to be created, in that case you can use any bdc or CATT or LSMW program.
    regards
    Srinivas

Maybe you are looking for

  • Using socket and JMS protocol in the same logic for OSB

    Hi frnds, In my organization...the only communication protocol used is "socket" protocol. However, I want to use JMS protocol to process incoming messages. Can somebody help me figuring out how to go about it. Using some nice OSB blogs, I am able to

  • SPM Extractors from SAP R/3

    Hi, I am quite new working with SPM and currently investigating options for data extraction activity from R/3 to SPM. I could see there is an extraction wiki, were I found very useful information, and could see the main options are: 1. Use SAP provid

  • Disk too slow

    Hi there, I am running logic express 7.2 and tried to run some audio files yesterday. Unfortunatly i cannot run them as i am getting a disk too slow message popping up. I was trying to run 18 x 24bit x 96000hz files. This doesnt strike me as excessiv

  • Add and Remove Publishers from Replication Monitor using T SQL

    Is there any possibility to add an Publishers from Replication Monitor using T SQL.i am trying to configure the replication using T SQL..i can create all other steps but didn't find any way to add publisher to the replication monitor..kindly suggest.

  • How to resolve ORA-01208

    Hello, I have two Linux servers running Oracle using a DAS for storage. The other day the cables were swapped to attach the one server's DAS to the other and vice versa. The databases were not shutdown first. The cables were then swapped back to thei