MASS CREATION of new inforecords and loading it in mass

Iam new to SAP MM .can anyone please let me know
1. what MASS CREATION OF NEW INFO RECORDS MEANS. Is it somethnig other than creating the info record using the TCODE ME11?
2. what LOAD INFO RECORD IN MASS means?

Hi
Mass creation of info records means, if you have more than 50+ records needs to be created, in that case you can use any bdc or CATT or LSMW program.
regards
Srinivas

Similar Messages

  • HT1151 I have my iTunes library on an external hard drive that was connected to a PC, now I want to connect to my new iMac and load the iTunes library onto that computer, can I do that?

    I have my iTunes library on an external hard drive that was connected to a PC, now I would like to connect that hard drive my new iMac and load the iTunes library onto that computer, can I do that?  Looking for a solution that keeps me from re-ripping my CD collection.

    Here are the official Apple Support instructions:
    http://support.apple.com/kb/HT4527
    Ciao.

  • New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

    This issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * [[Troubleshooting extensions and themes]]

  • Have copied my iTunes library back-up from my external hard drive (saved from my iTunes on my pc) onto my new Macbook and loads of the tracks have been duplicated, some four times some not at all?? any ideas guys?

    Have copied my iTunes library back-up from my external hard drive (saved from my iTunes on my pc) onto my new Macbook and loads of the tracks have been duplicated, some four times some not at all?? any ideas guys?

    Have copied my iTunes library back-up from my external hard drive (saved from my iTunes on my pc) onto my new Macbook and loads of the tracks have been duplicated, some four times some not at all?? any ideas guys?

  • Creation of new package and request number.

    Hi frndz,
    Hope everyone are doing fine. Coming to my query, its quite simple for you guys.
    But me being new to BW, I would like to know how to create a new package and request number.
    And I have a task to create a new IS and DS also. So do i need to create these new package and request number separately or at the time of creation of IS and DS.
    Please give me clear idea.
    Thanking you.
    regards
    Dubbu

    Hi Vinay,
                   I hope you are speaking about Package to collect Objects and collecting them in Transport Requests.
    Usually you use the same packages for all the objects. According to requirement if you want to create the Package you can goto SE80--> There you can create a New Package. Give Transport layer as SAP. and Activate it. Then you collect the package in a Transport Request. You can create the request by the create button on the screen when it ask for Transport Request.
    While creating the Infosource or other objects you mention the package which you have created while saving and you can use the existing TR or new TR for collecting them.
    You can use RSA1---> Transport Connection to collect the objects easily to TR's
    Regards
    Karthik

  • Creation of New DS and IS for single IO?

    Hi guys,
    I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
    And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
    Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
    Thanks in advance.
    Regards
    Dubbu

    Hi,
    Question  1 :
    The Data for this single IO should be loaded from a CSV-file.
    Answer :  You cannot just load only one IO without attributes, so I suggest u maintain a counter for records as an attribute of this Single IO and then load it .
    Question 2 :
    Loading the same into Infocube .
    Answer :  Its not possible just with your flat file upload data ,
    there are two ways of updating this , either you can update it with a routine basing on your requirement,
    else you have to prepare a file again with the combination of the other characteristics and then upload the data into your infocube or if you are getting from source map it  .
    let me tell you that just loading single IO with a file will never help you in any ways to upload again in to Infocube .
    Thanks,
    VSK

  • HT1473 I just got a new computer and loaded Itunes. All my music is on my new Apple Ipod but I do not know how to sync it from the Ipad TO ITUNES so I can put all my playlists back on the computer for home sharing. Can anyone help with the answer? Thanks!

    How do you Sync Playlists (Music) from my ipod Nano TO ITUNES? I know how to sync it the other way, from the computer (Itunes) to the ipad, but I just got a new computer and all the music is only on my Ipod Nano. Any help would be greatly appreaciated. Thanks! Pete B

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Creation of new plant and the impact of business

    Hi to all
    i am creating a new plant, and would like to know the impact of the plant, what are the changes to be made in the customization, i want to know what are the chages required, and let me know after unit testing and integration testing what activity to be performed, as i am at go live stage and in the production client how to extended the master data,  what is data migration how it can be done,
    thanking you

    Hi there,
    As an SD consultant, these are the things you need to take care.
    Assign the plant to the company code in OX18.
    You need to assign the new plant to the sales org / distribution channel in OVX6.
    Then assign the shipping point to plant in OVXC. If WH is active for your plant, then assign warehouse WH to plant & storage location in LE assignment.
    Reg the master data, you need to assign the material master to the new plant. Also maintain the MRP profiles, plant specific data in the MM01.
    Maintain the shipping point determination in OVL2 & storage loc determination in OVL3 (OVL3 if required)
    Check with MM, PP & FI if they need to maintain any plant specific configs. There are some configs from their end for sure. For eg for production orders, purchase orders, movement types etc.
    Reg the testing, you need to ensure that plant gets proposed automatically when a new sales order is created. Also maintain the relevent plant specific condition records.
    Similarly when PGI is done, it should update the transfer postings in MM & FI w.r.t plant.
    Even tough your project is in final stages, you have to do a regrious testing when a new plant is created. Testing cannot be compromised for time lines. It will lead to serious production issues if tsting is not properly done.
    Regards,
    Sivanand

  • Creation of new IS and DS for single IO?

    Hi guys,
    I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
    And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
    Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
    Thanks in advance.
    Regards
    Dubbu

    Thx

  • Creation of new version and its Posting

    Hello,
    I am trying to create a new version and Posting it programatically. For creating a new version for a particular claim i am using action code A019 and for Posting A043.
    i am callid FM BAPI_WARRANTYCLAIM_SET_ACTION for setting the action codes.
    My new Version gets created but if for some reason the posting doesnt take place i want to delete the new version created.
    How can this be achieved. There is no action code to delete a created verison of claim .
    Please suggest.
    Thanks!!
    Edited by: Swati Dogra on Mar 30, 2011 8:36 PM

    I was able to figure it out... neede to be transfer to Controlling first

  • Creation of new position and communication infotype

    Hi,
    can anybody tell me how can i create new position
    and how can i assign communication infotype to position.
    Kind regards,
    Shruti

    There are various ways to create position.
    PO13, PP01, PPOSE...go throug SAP Help and U can find them.
    Then assign this position to an employee in PA30.
    Then assign the 105 to the employee in PA30.
    Hence the position is linked to position.
    These are very basic things and can be found in SAP Help.
    Is there any specific things U require?Putting up the exact problem will help me to give U a proper solution rather than saying U somethign which U can easily get from Our best friend (Google).
    ~BiSu

  • How to Pop-up new Window and load PDF at same time

    Hi
    In my servlet application, when I receive request, I have to load PDF form and at same time I have to pop up new browser window with html content ( help data).
    I thought of writing <script>window.open(....)</script> to outputstream before writing FDFdocument , but it fails.
    I am using FDF tool kit to load PDF forms, once I set content type to "application/vnd.fdf" , I can't write any javascript to response.
    Any help /ideas to do this is appreciated.
    Thanks,
    Prakash

    Hi Prakash,
    Here is the way to solve this issue:
    Make use of HTML frame, one frame (maybe with 0 height and width) pop up with a new HTML browser using javascript. Set the content type and display the pdf in another frame.
    Note that one page can only set content type once, so if u have set it to application/vnd.fdf, you cannot write HTML content into same response stream.
    -ms

  • Issue with Creation of new entity and adding it to collection

    Hi Experts,
    LR_ENTITY_ACCT(Account details) is the parent node and that is populated using the query builder.
    From there, I am trying to get realtion of notes section 'BuilNotesRel'). If it is not present, I am creating a new entity of that relation through parent node, setting attributes and saving it. I have written the following code. While debugging, I can see the new entity created under parent LR_ENTITY_ACCT and set property is also working. But afer execution, if I check in genil_bol_browser transaction, there is no new entity created under BuilNotesRel. Please help.
    data:  LR_ENTITY_ACCT          TYPE REF TO CL_CRM_BOL_ENTITY,
               LR_COL_NOTES            TYPE REF TO IF_BOL_BO_COL,
                  LR_ENTITY_NOTES         TYPE REF TO CL_CRM_BOL_ENTITY.
            IF LR_ENTITY_ACCT IS BOUND.
              LR_COL_NOTES ?= LR_ENTITY_ACCT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilNotesRel' ).
    IF  LR_COL_NOTES->SIZE( ) = 0.
        LR_ENTITY_ACCT->create_related_entity( iv_relation_name = 'BuilNotesRel').
        LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
                LR_CORE_3->MODIFY( ).
            LR_COL_NOTES ?= LR_ENTITY_ACCT->GET_RELATED_ENTITIES( IV_RELATION_NAME = 'BuilNotesRel' ).
              LR_ENTITY_NOTES ?= LR_COL_NOTES->GET_FIRST( ).
                  LR_ENTITY_NOTES->SET_PROPERTY( IV_ATTR_NAME = 'TEXT_ID'
                                               IV_VALUE     =  'ZCOM').
                LR_ENTITY_NOTES->SET_PROPERTY( IV_ATTR_NAME = 'TDLINE'
                                               IV_VALUE     =  LS_ACCOUNT_DETAILS-NOTES ).
    LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
                LR_CORE_3->MODIFY( ).
    endif.
    endif.
    Thanks,
    Ramya

    Hi Sumit,
    I have used a structure for notes which is of TYPE crmt_bupa_il_notes.
    ls_notes                TYPE crmt_bupa_il_notes.
    Then I create the entity, get properties, set the properties and do a core modify.
    LR_ENTITY_NOTES = LR_ENTITY_ACCT->create_related_entity( 'BuilNotesRel' ).
         LR_ENTITY_NOTES->get_properties( IMPORTING es_attributes = ls_notes ).
        ls_notes-task = 'M'.
        ls_notes-text_id = 'ZCOM'.
        ls_notes-langu = 'EN'.
        ls_notes-languiso = 'EN'.
        ls_notes-tdformat = '*'.
        ls_notes-tdline = LS_ACCOUNT_DETAILS-NOTES.
          LR_ENTITY_NOTES->set_properties( EXPORTING is_attributes = ls_notes ).
          LR_CORE_3 = CL_CRM_BOL_CORE=>GET_INSTANCE( ).
                LR_CORE_3->MODIFY( ).
    Thanks,
    Ramya

  • DBM Creation of New Vehicle and the relationship with Valuation Class

    HI SAP,
    I'm having problem when creating new vehicle in /DBM/VM.  The Valuation Class that i use for VEHI is 4010. when i click
    on save the system show valuation class 3200 not allowed for material type vehicle config. i already check my valution class
    configuration, My Materia Type VEHI does not link with 3200. how do i resolve this issue ?

    Commander Sauk,
    From the error message it appears that valuation class tied up with your vehicle model is 3200.
    Is it a very new model for which no vehicles created so far?
    Can you please post accounting 1 view of material too showing valuation class as well as valuation category settings?
    Please also check split valuation is correctly setup for plant you are selecting for vehicle.
    check and reply with findings.
    Thanks
    Ritesh

  • Creation of new columns and reformatting of data in infocube

    Hi,
      Although i got the results i wanted in my demo cube, i am not sure how it came to that.
      In my flat file, i have entries of 1001 for 0D_CREDITOR, and 82004 for 0FISCPER. However in my infocube, i am seeing entries of 0000001001 for 0D_CREDITOR, 2004008 for 0FISCPER, and a new entry of 2004 for Fiscal Year.
      I am sure it must have gone through transformation in either the update or transfer rule. Please explain in finer details if possible.
      Thanks.
    Cheers

    Hi,
    0D_CREDITOR is using ALPHA conversion routine and 0FISCPER using another conversion routine which you can check in the data source itself in BI system.
    ALPHA conversion  padds up the values with 0's in the left if the values coming from the source is less then the length of the infooobject.
    SO if 0D_CREDITOR  is of length 10 and the value from source for 0D_CREDITOR is 1000...then it will pad up 6 0's in the left to make it 10.
    conversion routine for fiscal period will work in changing the field.
    Thanks
    Ajeet

Maybe you are looking for