Mass Delete of Alternative BOM

Hi,
Good day.
I would just like to verify if there is a transaction code that we could use in order to mass delete the alterantive BOMs of materials.
Thank you in advance.
JMTafalla

Hi Jasmin,
First of all,
in Tcode CS28 give variant name and then click on Maintain and then go to next screen.
In archive variant You need to specify following things by selecting appropriate button :
1.Control Parameters
2.Selection Type
3.BOM Categories for Archiving ( Material BOM, Equipment BOM etc)
4.Additional Restrictions to the Archived BOMs
Then you need to save above settings for variant and then excute the same. So you will be able Archive the BOM as per your requirement ( With / Without Deleting BOMs).
Pls. revert if any doubt and reward if useful.
Regards,
Tejas Pujara

Similar Messages

  • Mass deletion of alternative UOM conversion

    Hi Colleagues,
    Does anybody knows is there an easy way for mass-deletion of alternative unit of measure conversion rules in material master?
    Thanks,
    Artashes

    I did the following way:
    1. created a recording which always deletes the second line in Additional data-> uom conversions.
    2. by multiply running this recording via lsmw will delete all uoms.
    3. I was not able to do it at once as different materials has different numbers of alternative uom entered.
    Thanks,
    question closed.

  • Mass Deleting Materials from BOMs

    Hi,
    Our scenarios is that,
    We have a KALP named material type which are raw materials for us..
    And we decided to delete all these materials from BOMs.
    Through CS20 t.code we can delete materials one by one from bill of materials.
    But we have about 900 materials like that.
    Is mass deleting possible instead of deleting one by one?
    Thanx in advance

    this can be done in CS20 en mass. CS20 is the mass transaction for bom changes.
    enter your component number, select delete items and execute.
    it will list all header materials boms that have this item.
    click the button to select all and execute

  • Mass Delete - BOM and Routing

    Hi,
    My client want to delete around 400 BOMs and Routing, there is mass delete Bom and routing?
    Can anyone tell me the deatiled steps on how to delete Bom and routing?
    Regards,
    Sankaran

    Hi,
    The below link may be helpful..
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/8d/3e4b8a462a11d189000000e8323d3a/content.htm
    Regards,
    Siva

  • Alternative BOM No Deletion

    Hi,
    I have one scenario in which previously there were 2 BOM's available for single material, i.e.
    1) 01
    2) 02
    After some days, first BOM was deleted by the user and when we try to see BOM detail using CS03
    by entering
    Material = XXX
    Plant = XXX
    BOM Usage = 1
    Alternative BOM = 02
    Then it gives BOM details but when we enter
    Material = XXX
    Plant = XXX
    BOM Usage = 1
    Alternative BOM = 01
    It gives Error Message "Inconsistent data (inform your system manager)" even though BOM does not exist
    So what is the solution for removing this above Error message

    Hi,
        As suresh said you need to delete the alternate 1 in the header level. After that if you want change that alternate 2 as1, Then again go to create mode and you can create the alternate 1 with the same components of alternate2. After that you can delete the header level of alternate 2 also. So that there will be only one alternate BOM for your material.
    Hope it will be helpful.
    Regards,
    Vijay.

  • Mass component change in BOM

    hi
    i want to  mass change some components in BOM. For example in the BOM i have 10 components. Now i want to change 5 components in the BOM
    I have around 500 FG How to do that? Is it possible in LSMW?. or CS20?

    It is better to go for getting a BDC developed for all the mass changes in the BOM.
    Using CS20 you can only change a single component and replace with a new material. I think BDC is the best alternative.
    Hope this helps you.

  • T COde CS15 : Report is not showing the "Alternative BOM No" for some BOMs

    Hello Guru,
    I am facing a problem for the transaction CS15, when I use this transaction, in the output for some materials, system is not showing "Alternative number" of BOM.
    I cheked Deletion indicator, status of the BOM, validity period etc.
    But unable to get the reason why system is not showing alternative BOM number for the some materials / BOMs.
    Thanks to give your expert comments or solution.
    Thanks in advance
    Hemant

    Hi Hemant,
    please check in CS02 if those top level BOm's which dont show alternative BOm number in CS15, do they really have alternatives?
    the most probale reaosn why alternative is not shown is they dont have any alternate BOM or they are variant BOMs.
    please check.

  • Want to mass-delete an object

    I have a 700 page document that has thick rule objects I wish to mass-delete. I am putting them on master pages for consistency and to isolate them to their own layer. The ones I wish to delete are all locked, but are inconsistently positioned.
    The Find/Change dialog provides for finding objects that meet certain criteria, but I see no option to DELETE the found object, just to CHANGE it. I realize there is a certain amount of danger in such an option, but If I were to change the objects to some unique color before subsequently searching on that color and deleting them all, that would be a kind of safety step.
    As a safer alternative to deleting the objects automatically, I would like the option to move these found objects to their own layer, so that I could just delete the entire layer after reviewing what was placed there.
    Can this kind of mass deletion or mass movement to another layer be done?

    OK, here you go—it appears to be necessary to calculate the length with the Pythagorean theorem (distance formula), since InDesign just returns the corners of the bounding box surrounding the stroke.
    Also, for convenience, the commented-out lines print out some information about each rule that is operated on -- you might uncomment them and comment out the .remove() if you want to see what it is going to do first.
    var
        i,
        doc = app.activeDocument,
        rules = doc.graphicLines,
        bounds, length, x, y, g;
    for (i=rules.length-1; i>=0; i--) {
        g = rules[i].geometricBounds;
        x = g[3]-g[1];
        y = g[2]-g[0];
        length = Math.sqrt(x*x+y*y);
        if (rules[i].strokeWeight >= 2 && length > 4) {
            // $.writeln("Found rule "+i+" x "+x+" y "+y+" length "+
            // length+" weight "+rules[i].strokeWeight);
            rules[i].remove();
    strokeWeight appears to give the apparent stroke weight, regardless of whether it was initially set or if the rule was scaled to get there.

  • Deletion of  the BOMs

    Hi everyone !
                   I am Ranjan, a toddler in this SAP World. I have uploaded so around 3000 Bill Of Materials using a program and now I need to delete them as our client wants so many changes in it. And I am searching for a program or any other simple method to delete those BOMs. Could anyone please help me. I want to delete all those BOMs <<urgency removed by moderator>>.
                  I will be waiting for your precious reply.
    Edited by: kishan P on Sep 13, 2010 5:30 PM

    You can also check tcode CEWB other than cs20.
    I donot have any idea on CEWB.
    You can check BOM Mass Delete for further help.

  • Mass delete unposted assets without values through worklist in AS06

    Hi,
    I would like to delete unposted assets(got a list of asset numbers without values assigned) from AS06. I managed to create the worklist to store all the asset numbers. And from the AS06 screen, I went to SAP menu, Environment ->Worklist -> Delete Asset. But I could not because the worklist submenu items(include asset, delete asset and find asset) are all disabled(gray out).
    May i know if there is anyway this can be enabled for me to do mass delete of AS06. Or any available screen that enable me to do this.
    I am aware of the alternative is to write a BDC program for mass delete of unposted assets. However, I would like to explore the standard features to avoid having the code.
    Any advice.
    Thanks,

    Hello
    could you explain it in mote details?
    Thank you very much!

  • Exploding Latest Alternative BOM

    Dear Gurus,
    I have two alternative BOMs of same material. They have same validity period and lot size. I dont want to use Production Version. Now, when I create a production order no BOM is exploded, the system throws an information message saying: "No suitable BOM alternative could be determined"
    I am missing on some configuration. What I want is that the latest BOM should be picked up, i.e. alternative 2 should be exploded by the system in production order.
    Thanks
    Geravine

    Dear,
    BOM is not exploded in the following situations:
    - No BOM is effective:
    -- On the explosion date and in the given area of validity
       For the given effectivity parameters
    - The BOM has a deletion indicator.
    - The BOM is a multiple BOM, and has no alternative that matches the lot size for your required quantity.
    - No BOM matches the selection criteria of the BOM application you selected.
    - This is possible in the following situations, for example:
    -- The application selects a specific alternative on the explosion date you require. The material master record supports alternative determination by Explosion date.
    If the specified alternative is not valid on the explosion date, the BOM is not exploded.
    You can  Define Alternative Determination for Multiple BOMs in OS32
    Please try and come back.
    Regards,
    R.Brahmankar

  • How do I mass delete email from Trash folder?

    Is there an easy way to mass delete the emails from the trash folder?

    In your settings>mail>account>advanced, there is a way you can set it to self delete after 1 day. This is the earliest setting to self delete the mails. If you need to delete all of them right away. Just open one of the mails and press the trash can icon at bottom. It automatically opens the next mail and you can just sit there thumbing the trash can until all are gone. Works for me, both ways.

  • Mass Deletion of Schedule Lines

    Dear Friends,
    Our client's requirement is to mass delete the schedule lines generated through MRP by wrong production schedule. They want to delete it once in a month.
    regards,
    Ask

    Dear,
    I'm not sure just try this,
    Go to SM30 table MASSFLDLST
    add field LOEKZ
    You defined in customizing table T161 field STAKO- LOEKZ
    Then you can delete it through MEMASSSA T.Code
    Else better you use tools like LSMW to close those unwanted schedule lines.
    Regards,
    R>brahmankar

  • Mass Delete of Schedule Lines generated through changes in prod Schedule

    Hi friends,
    Kindly provide me the process of mass deleting schedule lines which are created through changes in Production Schedule in the month end.
    Regards,
    Ask

    Hi,
    Try T.code Me17
    thanks
    Rakesh

  • How do I delete an alternative Apple ID?

    There is no option on appleid.apple.com to edit or delete an alternative appleid  somehow my wife's appleid is listed as my alternative and I can't delete it  help?

    Is it listed as an @icloud.com, @mac.com, or @me.com email address?  Post a screenshot of your main page of the appleid.apple.com page,  but be sure to cover up the username part of the email address, as well as your personal information.  Just show us the part of the email after the '@'.
    As far as deleting Apple IDs, that actually can be done by Apple Account Security, but it's a painstaking process, and you would permanently lose all purchases associated to that Apple ID, and that primary email address can never again become an Apple ID.

Maybe you are looking for