Mass deletion of Forecast & Backlog Confirmatin from APO

Hello All,
Is there any transaction to delete the backlog Forecast & Confirmation from APO. Can MC75 transaciton in R/3 delete the Forecast from APO in mass. In current senario I am doing manual deletion of backlog Confirmation every month. Can any transaciton help me in same ??
Thanks in advance

Hi Mohit,
You can use TCode- /sapapo//rlcdel, which is the same as the report in SE38- /sapapo/rlcdelete. chose 'select object by categories'. Put the order category as F*, put the date range, planning version, product and location and execute. This will delete the forecasts for the particular product/loc.
-Manotosh

Similar Messages

Mass deletion of forecasts

Hi Experts,
I was wondering if anyone knew of a solution to do a mass deletion of forecasts. I know that you can do it on an individual basis with MD62 (Change Planned Independent Requirements) , but is there another method?
Thanks in advance!

Hi,
the standard way to delete forecasts is MD74 as mentioned above.
If you want to delete forecasts in the future or for a specific period only you also can use MS64. This transaction's intention is not to delete forecasts but it works. The idea is to copy the current forecast version onto itself and setting all forecasts to zero. For the selection this means:
- source version has to be the same as target version
- at 'change target version' you have to insert
Change quantity: 0 = ( do not miss the 0 !!!!!)
so that all values at the target/source version are set to zero.
- set all other parameters like period, mode etc as needed
Of course the forecast are not deleted then, but they are all set to zero what in most cases should be sufficient.
Hubert

Mass deletion of executed forecast

Hi PP experts,
I have one issue. I have executed forecast using MP38 transaction at plant level and now I wanted to delete the forecast which is created through MP38. I wanted to mass delete the forecast
I tried to delete using MP33, but it did not delete. Please help me on this.
Regards
Purushothaman

Hi,
Thanks for your reply. The second program:RMCPMLOE works. Thanks a lot....
Regards
Purushothaman.

Deletion of Mobile / telephone numbers from customer master XD03

Hi Gurus,
I need to delete all the mobile numbers from various customers (more than 500) in customer master XD03.
I tried deleting the telephone number entries directly from ADR2 table, but it showing inconsistancy.
Can anyone guide me how can i mass delete the mobile / telephone numbers from XD03.
Moderator message: duplicate post.
Edited by: Thomas Zloch on Jan 24, 2012

Use SE16N to get desired list of customer for your parameter - TEL_NUMBER with R3_USER = 2 or 3
You can modify the list downloaded & make necessary change.
Then use LSMW to upload change data to the system.
I don't think its neither recommendable idea or fair practice to use &sap_edit to make direct changes to Database.
Regards
JP

Releasing fcsts from APO DP with time of 12:00:00

I am using APO V5.1
I know by default that forecasts are released from APO DP at the start of the buckets, ie 00:00:00.
How can I ensure that that the forecasts instead have a time stamp of 12:00:00?
Thanks for any advice on this...

I am using APO V5.1
I know by default that forecasts are released from APO DP at the start of the buckets, ie 00:00:00.
How can I ensure that that the forecasts instead have a time stamp of 12:00:00?
Thanks for any advice on this...

How do I mass delete email from Trash folder?

Is there an easy way to mass delete the emails from the trash folder?

In your settings>mail>account>advanced, there is a way you can set it to self delete after 1 day. This is the earliest setting to self delete the mails. If you need to delete all of them right away. Just open one of the mails and press the trash can icon at bottom. It automatically opens the next mail and you can just sit there thumbing the trash can until all are gone. Works for me, both ways.

Deletion OF schedule LInes from APO SPP(Spare Parts Planning) through ABAP.

Dear All,
I need to delete the schedule Lines from APO SPP(spare parts planning ) system.I am looking for any available BAPI provided by SAP for this purpose.Please provide me help if any of you folks previously in your project went through this requirement.
If any other way is there other than BAPI please suggest.
Regards
Mukesh Pandey

Hi Siddartha,
That option is not working.
Thanks

How to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM

Hello Guru's,
Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
Thanks in advance.
Kumar

Hi Praveen
There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
Option1:
Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
Date adjustments:
Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
Aggregation level:
This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
Hope these help.

Where to see Forecast in ECC released from APO DP

Hi Experts,
we are releasing forecast data from APO DP to ECC.
can anyone please let me know in ECC is there any table and transaction where we can check the released forecast from APO.
Other than MD63.
Thanks in advance.
Regards
Maddy

Hi,
You can check it in MD63 - Display Planned Independent Requirements
Or Menu path:
SAP Menu->Logistics->Production->Production Planning->Demand Management->Planned Independent Requirements->Display
Regards,

Deleting PPMs from APO

Hi all -
Whats the best way to clear the obsolete PPMs from APO? Can it be done only through BAPIs/program/manually as suggested in some earlier posts?
Is there anyway we can make the system remove the obsolete ppms from APO?
Currently we just lock the PVs in R/3 and they change to inactive in APO and thats fine. At this point no matter what I do, since the valid from/to date is in the past, the system obviosuly does not even read them.
How do we get rid of old ppms from APO? Appreciate all your help!
Varun

Thanks for the reply. So, is there no way to set an indicator on PV or on the R/3 side so that the CIF master data update job of PPM deletes it from APO?
Thanks for your answers
Varun

Mass deletion of email from iPhone is possible with Yahoo

I have been able to mass delete messages from my iPhone using Yahoo. I log on to the server and highlight messages in my Inbox that I want to delete and send them to the Trash folder. I then empty the Trash folder. I then log off the server. I then go to my Inbox on my iPhone, hit refresh, and once the connection is made, the email is deleted! This method of deletion only affects the messages stored in your Inbox. If you have any messages in your Trash folder on your iPhone it might be easier or quicker to move the messages back to your Inbox before deleting them. This does not work yet with Comcast.
Message was edited by: eaflorida2

This is the default behavior with an IMAP account. The same does not work with or applies to a POP account.
The reason you are able to do this with the iPhone's Mail client is because you are accessing your Yahoo account as an IMAP account with Mail on your iPhone.
Firmware update 2.0 nor any future iPhone updates will be able to provide this for a POP account - for any POP account. There is a different protocol involved with each account type which Apple, the iPhone or iPhone firmware updates have any control over nor can solve. There is nothing to solve here.

Mass delete SWCVs from IR

Hi All,
is there any way to delete (infact mass delete) all the empty software component versions from IR.
We, by mistake, selected all while importing from SLD. and now the list of SWCVs in IR is very huge.
it is taking too much effort to select and delete each SWCV in IR individually.
I would like to delete all the swcvs which are empty, i.e. which dont contain any namespaces.
thanks,
Ganesh (g22sep)

Hi Joel,
I hope even if he re-imports , SWCV what he is having now and what he is going to re-import would be less , so it would override and leaving other the same as now.
rgds
srini

Deleting a resource from APO

Hi All,
We want to delete a resource from APO. Can some one throw light on this how to ahead with deletion. I would like to ask are there any prerequisites that are to be modified like deletion from PPM etc..
Thnks in advance,
kalyan.

if you go to transaction WUF and enter your resource name you can get the list of objects the resource is being linked to ....
you might need to delete them (in the case of transaction data) or delink them (in the case of PDS you want to retain with an other resource for example)
once you do this, you should be able to delete the resource from the transaction /SAPAPO/RES01
if you have a R3 connection and its in a CIF model ensure that is deactivated so it does not appear again

Mass Deleting Materials from BOMs

Hi,
Our scenarios is that,
We have a KALP named material type which are raw materials for us..
And we decided to delete all these materials from BOMs.
Through CS20 t.code we can delete materials one by one from bill of materials.
But we have about 900 materials like that.
Is mass deleting possible instead of deleting one by one?
Thanx in advance

this can be done in CS20 en mass. CS20 is the mass transaction for bom changes.
enter your component number, select delete items and execute.
it will list all header materials boms that have this item.
click the button to select all and execute

HT6378 Does a mass delete from iPhone mean they vanish everywhere else?

i have my photos on iCloud photo libary, on an iPad and on an Hone. If I lose the iPhone and the photos get deleted from it, will they also vanish from the iPad and from the iCloud Photo Library? Is ther any fail safe backup in the cloud?

Hi ronchicago2,
Welcome to the Apple Support Communities!
I understand wanting to know what happens to your iCloud Photo Library photos if they are deleted from a device. Please refer to the attached article for this information.
iCloud Photo Library beta FAQ - Apple Support
How does iCloud delete photos and videos from iCloud Photo Library?
Deleting a photo or video from your Photos app will also remove the item from iCloud Photo Library and from your iCloud storage allocation. Photos and videos you remove can be recovered from the Recently Deleted album for 30 days. After 30 days, your content will be removed from the Recently Deleted album. Photos are backed up on our servers for up to 30 days after they're deleted from the Photos app. If you need to recover these photos during that time, contact Apple Support.
Happy holidays,
Joe

Mass deletion of Forecast & Backlog Confirmatin from APO

Similar Messages

Maybe you are looking for