Mass deletion of forecasts
Hi Experts,
I was wondering if anyone knew of a solution to do a mass deletion of forecasts. I know that you can do it on an individual basis with MD62 (Change Planned Independent Requirements) , but is there another method?
Thanks in advance!
Hi,
the standard way to delete forecasts is MD74 as mentioned above.
If you want to delete forecasts in the future or for a specific period only you also can use MS64. This transaction's intention is not to delete forecasts but it works. The idea is to copy the current forecast version onto itself and setting all forecasts to zero. For the selection this means:
- source version has to be the same as target version
- at 'change target version' you have to insert
Change quantity: 0 = ( do not miss the 0 !!!!!)
so that all values at the target/source version are set to zero.
- set all other parameters like period, mode etc as needed
Of course the forecast are not deleted then, but they are all set to zero what in most cases should be sufficient.
Hubert
Similar Messages
-
Mass deletion of Forecast & Backlog Confirmatin from APO
Hello All,
Is there any transaction to delete the backlog Forecast & Confirmation from APO. Can MC75 transaciton in R/3 delete the Forecast from APO in mass. In current senario I am doing manual deletion of backlog Confirmation every month. Can any transaciton help me in same ??
Thanks in advanceHi Mohit,
You can use TCode- /sapapo//rlcdel, which is the same as the report in SE38- /sapapo/rlcdelete. chose 'select object by categories'. Put the order category as F*, put the date range, planning version, product and location and execute. This will delete the forecasts for the particular product/loc.
-Manotosh -
Mass deletion of executed forecast
Hi PP experts,
I have one issue. I have executed forecast using MP38 transaction at plant level and now I wanted to delete the forecast which is created through MP38. I wanted to mass delete the forecast
I tried to delete using MP33, but it did not delete. Please help me on this.
Regards
PurushothamanHi,
Thanks for your reply. The second program:RMCPMLOE works. Thanks a lot....
Regards
Purushothaman. -
How do I mass delete email from Trash folder?
Is there an easy way to mass delete the emails from the trash folder?
In your settings>mail>account>advanced, there is a way you can set it to self delete after 1 day. This is the earliest setting to self delete the mails. If you need to delete all of them right away. Just open one of the mails and press the trash can icon at bottom. It automatically opens the next mail and you can just sit there thumbing the trash can until all are gone. Works for me, both ways.
-
Mass Deletion of Schedule Lines
Dear Friends,
Our client's requirement is to mass delete the schedule lines generated through MRP by wrong production schedule. They want to delete it once in a month.
regards,
AskDear,
I'm not sure just try this,
Go to SM30 table MASSFLDLST
add field LOEKZ
You defined in customizing table T161 field STAKO- LOEKZ
Then you can delete it through MEMASSSA T.Code
Else better you use tools like LSMW to close those unwanted schedule lines.
Regards,
R>brahmankar -
Mass Delete of Schedule Lines generated through changes in prod Schedule
Hi friends,
Kindly provide me the process of mass deleting schedule lines which are created through changes in Production Schedule in the month end.
Regards,
AskHi,
Try T.code Me17
thanks
Rakesh -
MASS DELETION OF MATERIAL RECORDS
hi frds,
is is possible to delete all the material records at single trial (mass deletion of material records).is that any t-code for this.
is any other way to do this.please advice in this regard.
your advice is consisdered valuable.
regards,
G.V.SHIVAKKUMARNo, there is nothing that can do that.
I know there is a transaction that is able to delete all FI data, but no such transaction available for MM. -
Mass Deletion of Material Master
Hi All
Please am trying to delete material master have created. i need a Tcode for mass deletion.
Thank you.Hi,
In MM06 you can set deletion flag for materials (mara-lvorm). For multiple materials, use T. Codes MM17 or MASS.
---> Select MARA Table
---> Select multiple selection, past all material list and execute.
---> Select DF at client level from field selection tab.
To delete the Material Master records totally, use SARA. If there is posting done, then need to archieve that too. -
Best Practice for Mass Deleting Transactions
Hi Gurus
Can you please guide on this - We need to mass delete Leads from the system. I can use Crm_Order_Delete FM. But want to know if there are any best practices to follow, or anything else that i should consider before deleting these transactions from the system.
We have our archiving policy under discussion which may take some time, but due to large volume of reduntatn data we have some performance issues. For example when searching for leads and using ACE, the system goes through all the lead data.
That is the reason we are plannign to delete those old records. My concerns is that using CRM_ORDER_DELETE, would it clear all the tables for those deleted transactions and if there are any best practices to follow.
Thanks in Advance.
Regards.
-MP
Edited by: Mohanpreet Singh on Apr 15, 2010 5:18 PMHi,
Please go through the AppModel application which is available at: http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
The OnePage Table Based example shows exactly how to use deleting multiple rows from a datatable...
Hope this helps.
Thanks,
RK. -
Mass Deletion Of Purchase Requisitions Without Using LSMW
Hi,
We would like to delete huge volume of PR generated through MRP. Deleting PR will be a frequent activity in our business scenario. Since the person responsible for MRP is not very much conversant with LSMW, we want to avoid using LSMW.
I tried with MEMASSQR. But 'deletion indicator' field is not available in the field list.
Is there any method through which I can carry out mass deletion of PR?Hi,
I've tryed this from Manish Kumar Agarwal :
Go to SM30 enter the table MASSFLDLST
then create the new entry object type = BUS2105
Table name = EBAN Field:- "EBAKZ" (Purchase requisition closed)
Then run MEMASSRQ and select this field and then PRs after tnat on next page you will get option like film:- carry out mass changes go ahead with it.
But strangelly, it doesnt appear in the memassrq... any idea? -
Mass deletion of parked LIV invoices
Hey Guys:
I want to Mass delete the parked EDI LIV invoices. I have implemented note <b>971193 - FIPP: Mass deletion of parked documents</b> which is pulling data from FBV0...which is not the place where parked EDI LIV invoices are in.
I have found a table RBKP which is having my parked LIV invoices document numbers.
Can some of you give me a solution from where exactly we can mass delete these parked LIV invoices which have not touched the F1 yet.
Thanks
Gitaahi Gita,
If you want to Mass reversal then go to Tcode F.80.
Thanks
Ranjit -
MASS Deleting of Parked Invoices Urgent Urgent
Hello,
How to delete the Parked Invoices.
Is there any transaction for mass delete??
Regards,
Kumarhi,
MR8M --> cancel invoice document
MRA1 --> create archive
MRA2 --> delete documents
MRA4 --> manage archive
first you archive the parked invoices and using MRA2 you can delete all archived invoice documents.
hope this may help you,
regards,
srinivas -
Deletion of Parked Invoices - Mass deletion
Can any one please guide the T.code for the Mass deletion of parked IRs.
With regards,
Gokul.Mass Archived/Deletion of Parked Invoice Document:
T.code : MRA2 -Delete Documents/Archiving Invoice
You can excute the standard program for invoice deletetion RM08RADE the invoice documents from Invoice Verification that were archived with program RM08RARC (object MM_REBEL) from the database. Also this will execute in Test mode But its Records are deleted from the following tables:
RBKP: Document Header: Invoice Receipt
RBTX: Taxes: Incoming Invoice
RSEG: Document Item: Incoming Invoice
RBCO: Account Assignments
RBWS: Withholding Tax Data, Incoming Invoice
KONV: Conditions in the Incoming Invoice
NAST: Message Status
RBVS: Splitting the Vendor Line Item
CDHDR/CDPOS: Change Documents
Prerequisites :
Documents that have reached the end of the retention period set in Customizing. For the retention period, the posting date in the invoice document header is relevant. If no retention period is set in Customizing, the system uses 9999 days as the minimum retention period.
Procedure
1. If the program is only for testing purposes, that is you do not want it to actually delete any data, select the option Test run.
The variant entered in the Archive Customizing (Environment -> Customizing) under Settings for the deletion program in the field Test run variant, is used in this case.
(If the test run option is not flagged, then the system will use the variant which is specified in Archive Customizing in the field Productive run variant.)
2. Specify which data should be deleted with the pushbutton Archive selection.
3. Specify when the job should run with the pushbutton Start time. -
Mass Deletion of Purchase Requisitions
Hello Gurus,
I have a unique issue. Our SAP system creates multiple MRP generated purchase requisitions on a daily basis and we do not have the manpower to delete each single PR using the ME52N transaction. I checked the MEMASSRQ transaction which is used for mass changes of PRs. However, in MEMASSRQ, there isn't any field mentioned particularly for deletion or blocking of purchase requisition. I found a BAPI, BAPI_REQUISITION_DELETE, but even this BAPI is used to delete the PRs one by one. Not for mass deletion.
Right now, there are around 4000 PRs in our system which are lying and we have to delete them all. So, I want your help in finding out whether there is a transaction/report available for mass deletion of purchase requisitions.
Your suggestions would be very much helpful for us.
Thanks and Regards,
UmakanthHi,
Perhaps you can try to archive them. Check archiving object MM_EBAN. See not Note 123900 - Archiving purchasing documents/purchase requisitns for futher information.
I hope this helps you
Regards
Eduardo -
Dear Gurus,
I want executing mass deletion of the vendor using XK99 for Vendor (3000) and puchasing organization. for which i hve seleted
tables: vendor master records purchasing organization data
fields: del flag. porg (Lfm) = LFM1-LOEVM, but upon selection and save, system is giving error.
Field LFM1-LOEVM. is not an input field
Message no. 00347
Diagnosis
A transaction is processed using batch input.
System Response
The runtime error field xxx occurs (invalid entries)
Procedure
Correct the batch input data. Depending on the processing scenario, this can affect either of the following objects:
Batch input session
CATT procedure
Application program
Kindly help
REgards,
Prashanth PaiHi all,
This thread says its answered. But, the solution is not given. I request the threads starter to kindly put up the solution as I am facing the same problem.
I don't have this problem in Quality or Development, but only in Production. Also there is no version change in the program of the MASS transaction in any of the three systems.
Also, will the thread starter post what error message he got on running xk06 for the concerned vendor and purchasing organization?
Thanks!
Maybe you are looking for
-
help me with the gestures i need it back to normal running instead of the voice over which i activated double taps it slows the operations down
-
How do we use a JButton in the gui to activate a program?
any one knows?
-
Checkbox activate/deactivate in alv grid report
Hi All, I am using REUSE_ALV_GRID_DISPLAY fm to display output.In my output i having checkbox column based on values on internal table it will be checked and the checkbox column is editable. Now my requirement is if particular checkbox having values
-
Migrate dashboards Bo XI R2 to XI R3
Hi how do i migrate dashboards version XI R2 to XI R3? i did the entire migration more appear without the analitycs values, and the metrics there, there is some other procedure that i have to perform? atten
-
Getting Redifinition error while compile ACE 5.5.
Hi, I am trying to compile ACE 5.5 in C++.NET but it is giving following error. plz help me how to solve this error. c:\ACE_wrappers\ace\Global_Macros.h(56): error C2086: 'int ACE_BEGIN_VERSIONED_NAMESPACE_DECL' : redefinition ..\ace\Assert.h(23) : s