Mass deletion of material master at plant level

Hi,
Is there any way to flag materials nearly 500 Nos for deletion at plant level.
Regards,
Vengat

hi,
Use mass transaction for putting the delete indicator for the material master...this is to be done from MM17 tcode...
and later they all could archived...Archive it from MM71 and can display this from MM72..
Regards
Priyanka.P

Similar Messages

  • Add z field in material master at plant level

    I wanna to assign a new field in material master at plant level..
    What settings should be done to do this?
    Positive response will be highly appreciated.
    Regards

    hi,
    You can define the field directly via assigning the field to field selection group...This could also be done at industry sector, plant level as well....
    Check the path :
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields to field selection group...
    SPRO >> Logistics general >> MM >> Field selection >> Assign field at plant
    SPRO >> Logistics general >> MM >> Field selection >> Assign fields at industry sector level...
    For this assign the field to the respective table and then provide it at OMSR...
    Assign field selection group to it...
    Then in OMS9 give the priority for hide/display/req/optional to field...
    If you want this to be added in the new screen, then you have to make the settings under "configure the material master"...
    Hope it helps..
    Regards
    Priyanka.P

  • Mass Deletion of Material Master

    Hi All
    Please am trying to delete material master have created. i need a Tcode for mass deletion.
    Thank you.

    Hi,
    In MM06 you can set deletion flag for materials (mara-lvorm).  For multiple materials, use T. Codes MM17 or MASS. 
    ---> Select MARA Table
    ---> Select multiple selection, past all material list and execute.
    ---> Select DF at client level from field selection tab.
    To delete the Material Master records totally, use SARA.  If there is posting done, then need to archieve that too.

  • MASS DELETION OF MATERIAL RECORDS

    hi frds,
    is is possible to delete all the material records at single trial (mass deletion of material records).is that any t-code for this.
    is any other way to do this.please advice in this regard.
    your advice is consisdered valuable.
    regards,
    G.V.SHIVAKKUMAR

    No, there is nothing that can do that.
    I know there is a transaction that is able to delete all FI data, but no such transaction available for MM.

  • Mass changes of Material Master field with different values

    Hi,
    How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
    Thanks,
    K R Vishnu Kumar

    Hi Kumar.
    I think you have to use LSMW for mass updation for Material Master fields with different values.
    Regards,
    Rahul.

  • Mass updating of material master

    Hi,
    can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
    give me some brief overview so that i can proceed on that.
    I have to use either BAPI or IDOC only.
    Thanks & Regards
    Nageswar

    Hi Eswar,
    Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
    Same thread
    mass updating of material master
    which was blocked by moderator  Thomas and posted the same again
    Regards,
    Madhu.
    Edited by: madhurao123 on Nov 2, 2011 11:43 AM
    Edited by: madhurao123 on Nov 2, 2011 11:45 AM
    Edited by: madhurao123 on Nov 2, 2011 11:47 AM

  • MASS DELETION OF MATERIAL

    Hello Guys,
    I have around 5- 6 thousand materials and i need to set up a deletion flag. Is there anybody can tell me how can i set mass deletion of material.
    Points awaiting and answers are highly appreciated.
    Thanks
    Iqbal

    Hi
    You will find the solution to your query by going through the following thread
    Re: Deletion Flag
    Cheers
    Jags

  • Problem with mass IDoc for Material Master

    Hi All,
    Can anyone suggest a solution to work with mass IDocs for Material master?
    We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
    Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
    Regards
    Pooja

    Hello Pooja:
    The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
    In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
    However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
    The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
    Hope this helps.
    Regards,
    Jorge.

  • T.code for extend material master to  plant

    Hi
    Is there any t.code  (other than mm01) to  extend the material master to plants?
    regards
    sesidhar

    Hi
    RAj
    THANK U so much fro ur information ,,and i want extend to storagelocation...i think it is not possible in MM50 T.code
    in mm50 stor.loc option is not there
    regards
    sesidhar

  • Mass update on Material Master

    Hi MM experts,
    How can I "mass update" a large number of material to avoid a lot of manual work?
    Specifically updating/changing  Commodity code / Import code number for foreign trade.
    thanks!
    Warm regards,
    Jump

    Hi,
    Please try using T code MM17 to carry out mass change to material master record.
    Regards
    ram

  • Delete a Material Master Record Permanently from R/3 4.7

    We have a requirement to delete certain material master records permanently from our R/3 4.7 system. We have already archived all the relevant material master documents using SARA and are now trying to delete the material permanently using SARA but are unable to do so as the program is finding archive entries in MARI and prevents the material from being permanently deleted.
    Is there a way to remove records from MARI so that we can delete the material master record permanently.
    Thanks in advance.
    Samir

    It looks like transaction MMDE cannot be used for deleting only a certain set of materials. It is setup to delete all the materials.
    Is there a way to delete only a certain set of materials permanently from the client?
    Thanks
    Samir

  • Archiving/deletion of material master record from Plant

    Hi Experts,
    I have 50000 materials in 0001 Plnat and recently created a new plant 0002. I transfered 2000 materials from 0001 to 0002. In this scenario when I run a report in Plant 0001, all the 5000 materials are appearing, which i dont want to see the transfered 2000 materials.
    I tried with Archieving with SARA transaction but material is archived at Client level only, not at Plant level. Now I want to change the Material type (FERT)of those 2000 materials which are transferred to Plant 0002 to other material type(HALB). Can you please explain the chanllenges in this process ? or suggest other process.
    Regards,
    Bhagavan.

    Hi,
    You can change material type using transaction MMAM.
    In this case systemw ill check the material should not have any inevntory posting.
    It should not have a valuated stock.
    New material type sgould support same amount of material views as old one ( it might have other master data present like purchasing info record).
    Edited by: santosh sarda on Nov 12, 2010 5:32 PM

  • Mass Change in Material Master

    How to do mass Change of material group (say from 1HA TO 1HB) in material master in basic data 1 tab.
    Plz explain steps.

    Hi Rohit,
    Follow the Steps  SPRO - SAP Reference IMG - Production - Material
    Requirement Planning - Planning - Define Storage location MRP per plant - Enter
    the plant - Check for which Storage locations has got the indicator 1 - Storage
    Location stock excluded from MRP - Now remove that or choose the values.
    if you give me brief i can help you out more.
    Thank you .
    Regards
    Ram

  • Mass maintenance of material master

    Folks
    I am trying to make mass maintenance to certain fields in the material master. I want to change the MRP type from PD to X0 for several materials.
    How do I accomplish this on single shot ?
    Thanks

    Hi
    Please follow the below steps to mass change your MRP type.
    1.Go to transation MM17
    2.Select MARC in the tab Tables
    3.Select MARC-DISMM in the tab Fields & Execute
    4.Input the materials & plants ehich under goes changes.Execute.
    5.You will get two section of screens.In the top you can see New values with emty field.you can give the new value.In the bottom you get the details of existing field for material/plant combination
    6.Click the button called Carry out mass changes
    7.Save and check the log for any errors.
    You have to consider the mandatory fields that affected during the change of MRP type.
    Hope you can do the changes now.
    Thanks / karthik

  • Identification of old material number at plant level

    Dear All,
    We are implementing SAP for  two hospitals. In legacy system each hospital as its own material master and material number. Now in SAP each hospital we are treating as a plant. These two plants are assigned to one company code.
    So it means that there will be one unique material number for two hospitals. Now business wants their old material number (which is maintained differently for two Hospitals) at plant level in search functionality
    How can I achieve with material master
    Regards
    Subhash

    create a class "OLDMAT" for old material number with CL03 for class type 001
    define a characteristic for old material number for each plant  with CT04 and assign it to the class  (can as well be done from within CL03). name it e.g. OLDMXXXX (XXXX = plant number)
    in MM01 select classification view and add the class. after you hit enter you get the fields to add the old material numbers
    Standard F4 help for a material number allows then to search for a material number by classification.

Maybe you are looking for