Mass deletion or cancellation of background Jobs.

hi,
Can anybody tell me the program name or the Job name by which we can cancel or delete all the jobs i.e mass deletion or cancellation of background Jobs.

Hi,
One clarification:
BTCTRNS1 report/program suspends all Released jobs (not Scheduled status) and make the status 'Released/Suspended' - so that they will not run during your activity.
When you will run report/program BTCTRNS2 (using se38/sa38) it will release them again.
Note: You can not freeze/suspend jobs which are event triggered. You have to set them using sm37 (released -->scheduled) - option is available in the menu.
Jobs in scheduled status never run.
Don't release/submit any job after BTCTRNS1, the new job will run (it will not be suspended). Please instruct other user also not to submit any job further.
Thanks,
Subrata

Similar Messages

Report to cancel released background jobs

Hi Folks,
Can anyone guide me whether there is any standard report/program where i can delete/cancel the background jobs already released/scheduled? We can cancel individual job using SM37, but i need to cancel "n" number of jobs at one slot.
Thanks in advance.
Regards,
Shiva

Siva,
can plz tell me how to change or reschedule the time on background job ?
Dilip

I cannot cancel a background job

Hello,
I cannot cancel a background job which is running since the last Friday. I use the SM37 transacction but it doesn't stop.
Can anybody tell me how can I get to stop this job?
Thanks in advance.
Regards.

Hello friend,
I think these links will help you to stop the job running in back ground,
How to stop Active Background Jobs
http://stackoverflow.com/questions/1439033/sap-background-job-hows-it-running
If your problem still exists revert back to me i will help you.
Thanks,
Sri Hari

How to cancel the background job processing in ABAP programming?

Hi,
I have a requirement where i need to cancel the job depending on some constraint. My code is something like this:
Select some data from the table.
if sy-subrc = 0.
Do nothing.
Else
Cancel the job
call function 'BP_JOB_ABORT'
exporting
   jobcount                         = number
    jobname                          = name
EXCEPTIONS
   CHECKING_OF_JOB_HAS_FAILED       = 1
   JOB_ABORT_HAS_FAILED             = 2
   JOB_DOES_NOT_EXIST               = 3
   JOB_IS_NOT_ACTIVE                = 4
   NO_ABORT_PRIVILEGE_GIVEN         = 5
   OTHERS                           = 6
The above code is cancelling the job but it is throwing an exception called CX_SY_DYN_CALL_PARAM_MISSING because i dint pass job count. How can we find the job count of next job that is going to run? Or How to handle the exception which it is throwing. Even if i try to handle that exception something like this:
TRY
call function 'BP_JOB_ABORT'
exporting
   jobcount                         = number
    jobname                          = name
EXCEPTIONS
   CHECKING_OF_JOB_HAS_FAILED       = 1
   JOB_ABORT_HAS_FAILED             = 2
   JOB_DOES_NOT_EXIST               = 3
   JOB_IS_NOT_ACTIVE                = 4
   NO_ABORT_PRIVILEGE_GIVEN         = 5
   OTHERS                           = 6
RAISE EXCEPTION TYPE CX_SY_DYN_CALL_PARAM_MISSING.
CATCH
CX_SY_DYN_CALL_PARAM_MISSING.
ENDTRY.
It avoids the exception but it doesnt cancel the job. I even tried with function modules like JOB_OPEN
JOB_SUBMIT,BP_JOB_SELECT,BP_JOB_ABORT and tried to build some logic using status overview table (TBTCO) and TBTCP (Jobstep overview table).
Can someone suggest me the right way to write this program ?
Thanks in advance.
Rashmi

Hi,
Problem is solved.
Create an background job with 2 steps. The first step in the background job calls the program ZBACKJOB_STEP1. In the variant we have a wrong material number
If the material number is not found in Mara, the next step in the job should not get executed and the job should get cancelled..
In the above posts i had asked how do I get the job count of the job that is currently triggering the program at the runtimeu2026..If u see the below code uu2019ll get to know.. We have to use the standard structure TBTCM which captures the properties/characteristics of the job.
REPORT ZBACKJOB_STEP1.
TABLES: MARA,TBTCM.
PARAMETERS : MATNR TYPE MATNR.
START-OF-SELECTION.
SELECT SINGLE * FROM MARA WHERE MATNR = MATNR.
IF SY-SUBRC IS INITIAL.
    WRITE / : 'This is the material selected on the selection-screen' , MARA-MATNR.
ELSE.
        CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
      IMPORTING
        EVENTID                                    = TBTCM-EVENTID
        EVENTPARM                             = TBTCM-EVENTPARM
        EXTERNAL_PROGRAM_ACTIVE = TBTCM-XPGACTIVE
        JOBCOUNT                                = TBTCM-JOBCOUNT
        JOBNAME                                  = TBTCM-JOBNAME
        STEPCOUNT                              = TBTCM-STEPCOUNT
      EXCEPTIONS
        NO_RUNTIME_INFO                    = 1
        OTHERS                                     = 2.
    IF SY-SUBRC = 0.
      CALL FUNCTION 'BP_JOB_ABORT'
        EXPORTING
          JOBCOUNT                                     = TBTCM-JOBCOUNT
          JOBNAME                                       = TBTCM-JOBNAME
        EXCEPTIONS
          CHECKING_OF_JOB_HAS_FAILED = 1
          JOB_ABORT_HAS_FAILED              = 2
          JOB_DOES_NOT_EXIST                   = 3
          JOB_IS_NOT_ACTIVE                      = 4
          NO_ABORT_PRIVILEGE_GIVEN       = 5
          OTHERS                                         = 6.
      IF SY-SUBRC <> 0.
      ENDIF.
    ENDIF.
ENDIF.
Regards,
Rashmi

How to cancel the background job?

Hi,
I have schedule the backgroud job.How to cancel the background the job.
When i select the job and click on stop button, iam getting message "job is not active - cancellation not possiable".How to schedule the background job.
Regards,
T.suresh

goto sm37
SM36 Define Background Job
SM37 Background Job Overview
SM39 Job Analysis
U can Moniter the background Jobs through T code SM37
In the Simple Job Selection window enter the name of the Job and User of that Job and u can check the status of that Job like JobName, Job CreatedBy, Status, Start date, Start time Duration(sec.) Delay (sec.).

Cancellation of background job

HI ALL,
I have executed one program in backgroubd , it updates one of the database table . It now second day and still ACTIVE , i want to do some changes in the program and see
its effect now . How can i cancel this job , so that whatever chnages have been done to database they are not reflected in DB or it should appear as if no job was executed for this program?
Thanks in Advance .

Hi,
You can do it in 2 ways.
From se37 , select the check box of job and goto menu Job->cancel active job.
2. Double click on the background job and click job details button . Note down the PID and application server name.
Goto transaction SM51 and select the PID and goto menu program ->cancel without core.
Sometimes the job gets cancelled at the Application server but still it shows active status in SM37, so checking the job from SE37 by going to menu JOB->check active job will show the correct status.
Hope this helps.

How to cancel scheduled background job?

Hi,
I have used FM 'HR_START_BATCHJOB_IN_OTHER_SYS' to schedule background job.
Some mistake has happend and this FM calling has gone to infinite loop. So, now the system is keep on generating background job. I tried looking into SM36 to stop this background job but i failed.
Can anybody help me how to stop scheduled background job please.
Regards,
Mukund.

Hi,
Check which background process your job is running from the Job details and inform your Basis consultant to Kill the process. If you have sm50 acess or sm66 access you can do the same.
Regards,
Vijay v

I can't delete or cancel a print job

I sent a photograph to print on my HP Photosmart B209-am printer. When I waited over an hour for it to print and nothing happened I tried to delete it. The status has said "deleting" for several hours. I have run task manager to cancel, I have rebooted my Windows 7 64bit PC, and restarted the printer. Nothing will delete the print job. What can I do next? I can't print anything else until this is resolved. Thank you!
This question was solved.
View Solution.

Hi,
From the control panel, open administrative tools and select sevices. Browse down to the print spooler service, right click it, select Properties and then click on the stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder. Reboot the computer and you should be ok.
You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Hope this helps,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Cancel a background job

Hello Gurus,
I have created a Z-program and scheduled it in background for every 15 mins.
In some cases I if the program doesn't fulfill the requirement I have to cancel the job which is running.
Is there anything specific thing needs to be done to cancel a job or just "Leave Program" will do the work.
Please let me know.
Regards
Mac

Hi Mac,
After executing ur program the sessions will registered in SM37
with differrent status like NEW , PROCESSING , PROCESSED.
Go to Sm37, enter the job name and user name then select
the options scheduled,released and ready.
then cancel the jobs which are displayed.
Regards,
Ganesh.

Background job not deleted

Hi Experts,
i want delete the "SM:SELFDIAGNOSIS" background job on solution manager system .
and i have deleted, go to next date and then delete the released job but after one day again its showing in released.
so how i can delete it properly .
Regards
jai kr.

Shiv,
First check the frequency of this job from SM37
Go to SM37 -> give your job name ->and select all the options like
delete the entries in start date and end date fileds. then execute.
If you find job in Released state ,simply go to menu Job -> click on release to schedule.
Now this job will in Schedule and won't run untill you release it.
Deleting the jobs is not good idea ,simply you can suspend it.
Regards,
Srinivas Chapa.

RFC to cancel background job

I need to cancel a background job from running by using a Remote Function Call. Can anyone provide an example of an RFC for this? Ideally, it would cancel all jobs owned by a certain user.

BAPI_XBP_JOB_ABORT wants the JOBCOUNT as well as the JOBNAME. How can I get the JOBCOUNT? I don't believe there is a way to capture the ID from the external application kicking off the SAP job.

Notification upon Background Job Cancellation

Hi All,
We would like to send a notification to responsible person upon CANCELLATION of background job for various reasons.
What would be the best way to do it?
I tried to various events of business objects BPJOB/BPJOB_SMAN, with no sucess.
Will appreciate any guidance in this regard.
Thanks in Advance.
Regards,
Lakshmi Narayana

HI ,
You create one Z- Report and Write the following logic in it :-
1. Give a Job Name as selection selection parameter on the selection screen.
2. Select all those records from the Table TBTCO where JOBNAME = selection screen job name and SDLSTRTDT - sy-datum and STATUS = 'A'.
This will return you with all those jobs which were scheduled and canceled on current date. Status 'A' Means Canceled jobs.
3. Now you use FM 'EFG_GEN_SEND_EMAIL' to send a notification to the required user as per your requirement.
4. Now Enter all the JOb name which you want to monitor and save one varient for it
5. Now go to SM36 and Schedule this Z-Report with the created variant and the frequency you want.
This will Satisfy your requirement.
Please check and Revert.
Regards,
Nikhil Joshi

Background Job Still Running - Data Can Be Displayed Only Msg Populated in Maintain Versions (OKEQ) Screen

Hi,
I try to create 2013 FY in "Setting for Each FY" in OKEQ - Maintain Versions unfortunately I have created Null FY, try to delete Null FY on the time it will ask Job schedule, I have cancelled the job & reopen Maintain Versions (OKEQ) screen on the time system populated the msg "Background Job still running - Data can be displayed only"
In Settings for Each FY screen there is no New Entries button, all FY are blocked status, changes was not allowed.
How can I resolve it.
Waiting for your valuable suggestions.
Regards,
Nageswar.

Dear Rajneesh Saxena
Thanks for your prompt reply.
Yes you are correct, on the time of deletion it will ask Background Job Process, for immediate deletion must & should select "NO".
While "Settings for Each FY" screen populates message "Background Job Still Running - Data Can Be Displayed Only" open screen in display mode enter the command "=KILL" in command bar press enter, then you will allow to changes get New Entries button also.
Problem is solved
Regards,
Nageswar.

Cancel the Backgrounf job

Hi Experts,
i have to cancel the Backgrounf job which is active and Running. i am getting this active job from TBTCO table and using FM "BP_ABORT_JOB' and i am passing ' Job coun' and Job name' but too i am not able to cancel the back ground job. Please suggest me how to do this or any other Fm by which we can cancel the active background job?>.
Please help on the same.
mahesh

Check program RSBTCDEL
You can call it using the job name
similar question for reference How to cancel the background job processing in ABAP programming?
Edited by: Keshav.T on May 3, 2010 2:52 PM

Regarding Background Job Abort using

Hi ,
I am using FM BP_JOB_ABORT to abort background jobs through program,but it taking longtime to cancel background jobs in SM37 after exectuing FM BP_JOB_ABORT in program..
will i have to write any statement in program after this FM BP_JOB_ABORT to cancel the background job immediately through program..
Awaiting for valuable suggestion..
Regards
Anil

Hi,
I looking for FM to cancel background jobs quikly through program..
Regards
Anil

Mass deletion or cancellation of background Jobs.

Similar Messages

Maybe you are looking for