Mass extension of material master to differnt sales area

Hi,
How can we extend material master to different sales area enmasse.?
Regards
Kantha

A material master is not just linked to a sales area.
you have to create sales views per sales org and distribution channel.
there are many fields in there that need to be maintained, SAP stores this info in table KNVV
if all data in the new sales area is equal to an existing sales area, then you can easily extend using MM17, if not, then you have to use LSMW.
MMSC_MASS is for storage location extension, this is certainly not a transaction to create sales area data views.

Similar Messages

Mass changes of Material Master field with different values

Hi,
How to change a field in Material Master for more than thousand materials. I think MM17 can only be used for mass changes of materials with same values. I need to upload different values for different materials. Is there any other way to do this.
Thanks,
K R Vishnu Kumar

Hi Kumar.
I think you have to use LSMW for mass updation for Material Master fields with different values.
Regards,
Rahul.

Mass updating of material master

Hi,
can any one plz tell me the process of mass updation of material master charecteristics such as classification name, classification type,charecteristics name, charecteristics value for the given materials.
give me some brief overview so that i can proceed on that.
I have to use either BAPI or IDOC only.
Thanks & Regards
Nageswar

Hi Eswar,
Please check with BAPI_OBJCL_CREATE_KEY. There are no of threads available on same topic. lease check for the available information in SCN.I will suggest you post this in Data transfers forum.
Same thread
mass updating of material master
which was blocked by moderator Thomas and posted the same again
Regards,
Madhu.
Edited by: madhurao123 on Nov 2, 2011 11:43 AM
Edited by: madhurao123 on Nov 2, 2011 11:45 AM
Edited by: madhurao123 on Nov 2, 2011 11:47 AM

Problem with mass IDoc for Material Master

Hi All,
Can anyone suggest a solution to work with mass IDocs for Material master?
We have DEBMDM and CREMDM as mass capable IDocs for Customer and Vendor. How do we get mass Material Master IDocs from R/3 in a single XML file?
Also the standard Material repository supplied with SAP MDM 5.5 SP3 doesn't have any XSD definition for MATMDM. Can anyone throw some light on this problem?
Regards
Pooja

Hello Pooja:
The standard way to do it is to generate a single file containing multiple idocs (And for the sake of performance, I suggest you stick to this technique).
In the case of material master, everything is straight forward. In the case of customer and vendor master, when data flows from R/3 to MDM no idoc conversion needs to be performed by XI.
However, for the case of customer and vendor master, when data flows from MDM to R/3, XI needs to separate the data in CREMDM to CREMAS and ADRMAS in order for R/3 to be able to process the idocs; as well as separate the data in DEBMDM to DEBMAS and ADRMAS.
The good thing is that you do not need to worry about all this mappings and conversions in XI. The only thing you need to do in XI is to import the standard business content for SAP MDM 5.5 into XI.
Hope this helps.
Regards,
Jorge.

Mass update on Material Master

Hi MM experts,
How can I "mass update" a large number of material to avoid a lot of manual work?
Specifically updating/changing Commodity code / Import code number for foreign trade.
thanks!
Warm regards,
Jump

Hi,
Please try using T code MM17 to carry out mass change to material master record.
Regards
ram

Delivery to copy weights,volumes from material master,instead of sales ord

hi,
The weights/volumes get copied from the material master to the sales doc and from the sales doc to the delivery.
We have a issue where proper weights/volumes are not known at the order entry. thus when the new weights etc are noted, they change it in the material master.
could some one please let me know how to configure the system to take the values from the material master for these instead of the sales doc to get the weights/volumes.
that is the delivery doc should get the weight and volume from the material master(changed values)
Appreciate your help on this.
Thanks & Regards,
Keshini

Hi Keshini
So , lets assume that you have created a sales order for the material MAT1 and it has Net weight 5kg & Gross weight 6kg ,Now the sales order status is open you have not yet delivered that order and you have changed the Net weight 10kg & Gross weight 14kg. So you want to update that open sales order to Net weight 10kg & Gross weight 14kg. If that is the problem then just go to VA05 and give the material (MATNR) and check the box open sales orders then you will get the open sales orders then in the menu you select to carryout the net weight & gross weight there you can change .and then you can do delivery then the updation will take place in the Net weight & Gross weight also
Regards
Srinath

Material master extending to sales organization , distribution chanel ..

Hi All,
I have done the plant to plant Material master extending
my query is similar way how to approach the material master extending to sales organization , distribution chanel and storage location.
earlier in the plant to plant i have taken the selection screens
parameters : source plant
select option : target plant
materials i have taken is : material type and related but i didn't take any sales org, division and storage.
Regards...

HI,
you can do this through MM01 bdc select sales views and end you data.(for extanding views not in mm02, mm01 only)
i hope it will slove your problem else please replay with quary.
Do Reward points..if found helpful

Mass change of material master

Hi Experts,
I have a query regarding mass change to be done in material master. I need to update one value in the Material group 4 field in sales org view 2 in MM02 transaction for nearly 300000 materials. One option i find is LSMW and the other i saw is transaction MM17. Please let me know how feasible is this MM17 transaction? Is it possible to upload all the 30000 materials through MM17 transaction in one go and update the field? Will there be any performance issue if MM17 transaction is used?
Please give your suggestion.
Thanks
Dinakar

Hi,
Use MM17,
Goto the Transaction code MM17 and in the table check the MVKE- sales org data for material
and select the Fields tab and choose the field MVKE-MVGR4 and execute
Now enter all the materials in the next screen for which you want to change and execute
In the next screen you can maintain the new values for the old
Please check and revert
thanks,
santosh

Mass Change in Material Master

How to do mass Change of material group (say from 1HA TO 1HB) in material master in basic data 1 tab.
Plz explain steps.

Hi Rohit,
Follow the Steps SPRO - SAP Reference IMG - Production - Material
Requirement Planning - Planning - Define Storage location MRP per plant - Enter
the plant - Check for which Storage locations has got the indicator 1 - Storage
Location stock excluded from MRP - Now remove that or choose the values.
if you give me brief i can help you out more.
Thank you .
Regards
Ram

Error during Mass Maintenance of Material Master

Dear All SAP guru,
During mass maintenance of order unit ( PCS) and variable order unit "1" (Active) from T-code MM17, system is giving one error message.
Error Mess: 30000052280140 : Messages have been issued: number MASS000120000000 and notification No.:
MK101.
While system allowing automatically to log through MM90, but after puting the log no.: MASS000120000000, system is not execting.
Pl suggest ....as conversation factor is also maintained in material master for this.
Regards,
Pinku.

HI ,
check note 487111.
According to this note
Symptom
In the planning data mass maintenance (MPGD_MASS), you select the "Conversion" field (UMREF) and enter the new value e.g. '2,01' and save the change. In the log of the mass maintenance, the system issues error
MK101:
....... : Messages have been issued: number MASS............
Detailed display of error message:
Message number BF 020
Value cannot be interpreted as a floating-point number. Other terms
Reason and Prerequisites
The problem is caused by a program error.
The symptom occurs if during the maintenance of your own user profiles, you defined "Comma" for the decimal notation (Transaction SU3).
Due to a program error, the system saves the value of the field to be changed program-internally in the exponential display with "Point" as the decimal place (2.01E+00).
Solution :
You have implement the solution mentioned in the note .
Regards,
Anupam

Mass deletion of material master at plant level

Hi,
Is there any way to flag materials nearly 500 Nos for deletion at plant level.
Regards,
Vengat

hi,
Use mass transaction for putting the delete indicator for the material master...this is to be done from MM17 tcode...
and later they all could archived...Archive it from MM71 and can display this from MM72..
Regards
Priyanka.P

Mass maintenance of material master

Folks
I am trying to make mass maintenance to certain fields in the material master. I want to change the MRP type from PD to X0 for several materials.
How do I accomplish this on single shot ?
Thanks

Hi
Please follow the below steps to mass change your MRP type.
1.Go to transation MM17
2.Select MARC in the tab Tables
3.Select MARC-DISMM in the tab Fields & Execute
4.Input the materials & plants ehich under goes changes.Execute.
5.You will get two section of screens.In the top you can see New values with emty field.you can give the new value.In the bottom you get the details of existing field for material/plant combination
6.Click the button called Carry out mass changes
7.Save and check the log for any errors.
You have to consider the mandatory fields that affected during the change of MRP type.
Hope you can do the changes now.
Thanks / karthik

Mass Deletion of Material Master

Hi All
Please am trying to delete material master have created. i need a Tcode for mass deletion.
Thank you.

Hi,
In MM06 you can set deletion flag for materials (mara-lvorm). For multiple materials, use T. Codes MM17 or MASS.
---> Select MARA Table
---> Select multiple selection, past all material list and execute.
---> Select DF at client level from field selection tab.
To delete the Material Master records totally, use SARA. If there is posting done, then need to archieve that too.

Extending material master for different sales org/plant combination

hi ,
1 ) a material can be sold from one plant by many sales organisations. so we map this scenario in enterprise structure by the config step "assign sales org--dist channel--
plant ". (let's say sales org A and B selling from plant 1 and also sales org A selling from plant 2)
when we have defined the above config step, then why we need to have material master extended for different combination of sales org and plant as in stpe 1 ?. we can just create one material master with one plant and sales org combination and based on config as in step one, we can sell material from any sales org from a plant ?
2) we can extend material master for any combination of sales org/plant .....is it also possible to extend material master to different storage locations !
regds
pamela
Edited by: Pamela79 on Feb 15, 2011 11:02 AM

There are several reasons why you should extend the materails to different sales organizations and plants.
a. The materials are normally valuated at the plant level. So, you can have different valuations at different plants.
b. You can have different quantity stored in different plants. How do you know which plant has what quantity.
c. You can have materail not to be sold from one plant, but you can have the same materail sold from the other, how do you block it? at the plant and materail combination, you can do it.
d. For different sales organizations, you may want the cost and the price to be posted to different GL accounts. You can control it at sales org level of the materail.
e. You may just want the material to be purchased but not sold, then you may not even create a sales org view for the material. But say, in future you will like to only purchase a materail from a plant and consume it for some other purpose but not sales (which u did previously), then you can block it at sales org and dbr level.
So, these are a few reasons. But there could be many. You can have a look at the fields in the material master at sales org level and plant level and you can find it for yourself howmany parameters are there to control...
Hope this helps...
Regards,
Mukund S

Report that shows material master record with sales text

We have a requirement to pull the material number along with the material sales text from the material master. Does a standard report exist that includes the sales text (from the sales text tab in the material master record?)
Thanks in advance.

Hi,
There are not any SAP Standard Report.
The item texts are stored in table
STXL - STXD SAPscript text file lines
You need to retrieve the Text maintained using the Function module
READ_TEXT
goto SE37 , & Click on test enter the details
Text Object MATNR
Text Name 6000000376
Text ID 0001
Language EN
And execute the Text maintain in the Text ID - 0001 - Sales Text will be retrieved.

Mass extension of material master to differnt sales area

Similar Messages

Maybe you are looking for