Mass Extension of storage loaction

Dear Experts ,
I have defined a new storage location . I need to extened may articles for this storage loaction .
Is there any transaction avalable where i can do this activity en mass ?
Regards
Anis

Dear D N ,
Mass transaction can change the existing entries . It is not possible to exteend the article to a new store . Please suggest if there is a mass transaction for extendint to a storage location .
Regards
Anis

Similar Messages

  • Mass Extension of BOM to a New Plant

    Dear all
    I have BOMs master data in the system for Plant 1000.
    However, I would like to perform mass extension these BOMs master data to Plant 2000.
    Can I use CS20 or other methods to do?
    Thanks
    Joseph

    Dear Joseph,
    There is no T Code to perform this activity in mass,create a BDC for the same and go ahead.
    For individual material you can assign the plant through CS05.
    Regards
    Mangalraj.S

  • Sale of same material from two different storage loactions

    hi,
    how can i configure to sale same material code from two different storage loactions?
    for eg if material code is 15000 and it is extended in two storage location A and B.My requiremnet is i want to sale from both storage loction at same time A and B both.How can i map it?
    thanks
    Nakul

    Dear Nakul Raj,
    If you want to sale same material from different storage locations it can be done.
    First raise the sales order enter the material code and quantity as a first line item and give the storage location "A" in item shipping tab.
    Then give the same material code and quantity (how much you want to send) as a second line item with storage location "B".
    Then save the document, do the delivery, the storage locations will be copied from order to delivery, if you want to change you can do so.
    Do the PGI.
    Hope it will resolve your issue.
    Please reply if any further clarifications
    Kindly try and let me know the result
    Thanks&Regards
    Raghu.k

  • Mass maintenance of storage locations

    Hi,
    Do we have any T code in SAP for mass maintenance of storage locations in plant wise.
    T code MMSC is for mass maintenance of storage locations w.r.t. materials...
    My requirement is mass maintenance of storage locations in plant wise..
    Pl help..
    Uts

    hi,
    What exactly you wanna do with the storage location...
    If you don't wanna use it further for a plant, and even wanna retain it...then you can jus change the name so it will be automatically blocked under a plant....
    Regards
    Priyanka.P

  • Storage Loaction transfer from R/3

    Hi Experts
    How do we transfer storage loactions from ECC to SRM
    Regards

    Ivan  issue was solved :-D. My problem was because the FM BBP_RFC_READ_TABLE didn't exist in R/3.
    This issue was solve when we applied note 1175255 in our R/3.
    Storage location replication problem
    br
    muthu

  • Mass extension of article to another storage location

    Hi All,
    How can we extend article to another storage location in Retail...like MMSC tcode in Standard R/3.
    for ex: Suppose we have 100k article already exist with storage location "0001", Now we have to extend it to Storage location "0002".
    helpful answer will be rewarded.
    thanks & Regards
    saurabh dubey

    Dear Saurab,
    Manish is exactly right here, we need to create a simple BDC with artile, site, Sales org, Distribution channel and storage location (new one for extension) to get it done as MM46 (MARC-LGFSB) will change/update the values from existing status rather than extending the new values.
    Also we Can't use MMSC or MMSC_MASS with Retail Articles.
    I hope your query is being answered.
    Regards,
    Kunwar

  • Mass extension of material master to differnt sales area

    Hi,
    How can we extend material master to different sales area enmasse.?
    Regards
    Kantha

    A material master is not just linked to a sales area.
    you have to create sales views per sales org and distribution channel.
    there are many fields in there that need to be maintained, SAP stores this info in table KNVV
    if all data in the new sales area is equal to an existing sales area, then you can easily extend using MM17, if not, then you have to use LSMW.
    MMSC_MASS is for storage location extension, this is certainly not a transaction to create sales area data views.

  • Mass update of Storage Location

    Hi Gurus,
    I've executed mass transaction MMSC_MASS for extending the storage location to 0002 and 0003.
    How to exclude these storage location to exclude in MRP run ?
    Can it be done anywhere in material master ?
    Please throw some idea on this.
    Thanks
    Aadhya

    Hi,
       Storage loc MRP indicator can be maintained in material master - MRP 4 view as shown below. You can maintain the indicator as 1 if you want to exclude the storage loc from MRP.
       Check the documentation for the field and proceed.
    Regards,
    AKPT

  • Mass HD Video Storage Solutions

    I am trying to decide how I should go about choosing a storage solution for large amounts of HD video in a new editing studio we are building.
    An xServe is already a definite purchase because we like the scheduling abilities for company resources in iCal, and would also like our Mail in house. That...and we are Mac fans.
    Our real concern and my question here is this. What would you suggest our answer to storing all of our HD video be. We would like to keep an archive of all our raw video coming off of the cameras, but realize how many TBs we will be looking at.
    We will be recording around 40 hours of HD video per week and over time this number will continue to grow. You can see how many TBs of video we will be building up. Until now we have been burning all of our archives to BluRay but we would like for our video to be searchable and more accessible.
    What is the best mass storage solution without being ridiculously expensive? (although we realize expensive may be the answer to our problem)
    Cost aside, what would be the best storage solution to purchase. We were looking at the Promise RAID. We figured it would be smarter to purchase a mass RAID array instead of continuing to purchase multiple xServes whose capacity max out at 6TB.
    Also, what are the strengths of adding XSAN to the mixture?
    Thank you all in advance for your help.

    Your Vixia shoots AVCHD, and while not uncompressed HD (230 MB/s), it will need to be trans-coded into ProRes (17-18 MB/s) for you to edit it in Final Cut which will take up some space. I use AVCHD a lot, and at 1920x1080 @29.97 you'll need about 65GB per hour of trans-coded ProRes footage. If you can get away with ProRes LT or Proxy, you will make it even easier on yourself.
    If you have to have all of your footage available for editing this will come at a premium as disk space is more expensive than storing to tape. You mentioned you'll be recording 40 hours per week; at that rate you will need have some sort of archive solution or a massive budget to keep it all on spinning disks.
    In the end though, it all still comes down to what your requirements are for editing. Do you have one editor or ten? How many video streams will they need to be able to edit at one time? If it's more than about two (3-4 is pretty typical) and you have more than 2-3 editors, you are rapidly heading for Xsan land. And a big one at that. A basic Xsan with a couple of Promise RAIDs can cost $75,000 or more.
    You could get a number of Promise chassis and daisy chain them together using SAS, but this won't scale beyond five units, and your total bandwidth will be limited by the single fibre RAID controller they are all connected to at the top.
    If you are on a budget you might want to look at something like this:
    http://maxxdigital.com/shop/index.php?cPath=137
    They daisy-chain together using SAS. If you connect the head unit to an Xserve using SAS as well, you can then share out your data using Gigabit ethernet, or if you have the budget, 10GigE which is fast enough to edit several streams of ProRes. Maxx has a popular system called Final Share that will allow you to get a lot of data out to several edit stations fairly affordably.
    http://maxxdigital.com/shop/index.php?cPath=117
    JM

  • Extension of Storage Location

    Hello together,
    I would like to extend storage location for 700 no of materials. Can we do in mass maintaince.
    Or is their any other way?
    Thanks in advance.

    hI,
    try this
    go to MASS
    then select BUS1001
    go to plant data for material execute
    click on data records to be creatd
    then add material in field
    then select select field button and add storage for extrenal procurement then there u will find on filed for external proc
    now do mass change
    G.GANESH KUMAR

  • Issue: Purchase order release strategy with storage loaction.

    Hi Friends,
    I have created release strategy for purchase order considering following characteristics.
    1. Plant
    2. Purchase organization
    3. Purchase group
    4. Document type
    Hence the release strategy is working fine.
    Now the requirement is changed, PO approves should be picked depending on the storage location wise. So i tried to create characteristic for storage location with table name CEKKO and with field LGORT. However system not allowing to create, telling that field LGORT not found in table CEKKO.
    Can any one tell me how to maintain this LGORT filed in structure CEKKO.
    Thanks in advance
    Shashidhar

    HI Shashi ,
      Thanks for your quick response,
    I have Appended a structure to Standard Structure CEKKO with Field LGOBE.
    Also we written the code :move:  i_cekko = e_cekko, in user User-Exit M06E0004 function exit
    FUNCTION EXIT_SAPLEBND_002.
    However, the release strategy is not triggering when PO is saved,
    also the user-exit is not getting triggered , even though i have included the statement ' Break-Point'
    in it.
    Kindly reply.
    Thanks  ,
    Shashidhar

  • Mass extension of g/l accounts to company codes

    Hi gurus,
    Can anyone assist with a method to mass extend g/l accounts to a company code instead of the manual way?
    Thanks

    Hello,
    Use transaction code FS15 to copy GL accounts from one company code to the other.
    Regards,
    Ravi

  • Split deliveries by Storage loaction

    Hi All
    Please could you assist me with the following request , I am currently trying to split a delivery by storage location and having no luck .
    I have tried a few of the options availble via the SCN community but it has not helped (http://scn.sap.com/thread/3377338) .
    I have loooked in the copy routine option but it does not seem as though this is possible . After looking at this note  https://websmp203.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=546668 it does not seem possible to use the copy routine option .
    Can anyone advise what would be the best way to do this going forward ?
    Thanks
    Regards
    Justin Naidoo

    Hi Guys
    Just an update from my side . Using ZUKRL field for splitting a delivery works to the extent that when you save the delivery only the items specific to the split criteria are saved in that single delivery .
    I think my biggest issue was I expected this splitting to create 2 deliveries , but this does not seem to be the case . I had to  find an alternate to solve this issue using an event linkage on the likp business object . Hope this will help someone in the future .
    If anyone has managed to split and create 2 deliveries using the ZUKRL please do let me know how .
    Thanks.  

  • Document storage loaction in RMS

    hi all,
    where can we find the storage location of a document created in RMS/transaction Organizer? can we create an XLS file using BAPI_DOCUMENT_CREATE2? if we can please tell me about the status and other required paramaeters.
    any useful help will be rewarded with points.
    thanks in advance,
    Anil

    Dear SAM
    that is mean if the STO is created with certain storage location i can't change the storage location , but if the STO is created with respect to certain storage location and the material exist in another storage location in the same plant what we have to do to create Out bound deleivery
    thanks

  • Mass Extension of cost center and cost element validity dates

    Hi SAP Gurus,
    We have around 5000 cost centers and 6000 cost elements for which "Valid to" date is 09/27/2008. We need to extend this date for another 5 years.
    Can you please suggest any pointers as how we can do the mass update.
    We have already tried KS12 which is not of any help.
    Thanks,
    Sreeni.
    1-408-307-7965
    CA, USA.

    Hi,
    Run the LSMW.
    Or Use the fuction automatic creation of Primary/Secondary cost elements in the SPRO.
    Or You can write a program which replaces the valid to date directly in the database table.
    For this you require ABAPER help.
    Regards,
    Edited by: Jagadeesh Sornapudi on Sep 13, 2008 8:25 AM

Maybe you are looking for