Mass load plants to a company code

How can I Mass load plants to a company code in SRM. The only way we know how to do this now is to load them 6 at a time in the extended attributes location section of the general attributes. can anyone help
Edited by: John Wilson on Apr 9, 2008 11:12 AM

Hi. Sorry for the late answer, only just found this thread while searching for something else.
You can load 9 plants at a time a lot quicker than in PPOMA_BBP if you use PP01 and maintaining the "EBP Location" infotype 5502 then copy and paste from Excel.
You can also CATT/ECATT this transaction, or do a call transaction from within a program.
To maintain plants in PP01 you might have to change a setting in table T777I.
Regards,
Dave.

Similar Messages

  • Stock transfer order between 2 plants in same company code

    Dear All,
    We have the requirement, where in the stock tranfer order (between 2 plants in same company code) instead of Material valuation price, MAP/Standard (depends on Price Control) gets picked up from supplying plant ,user should be able to enter its own price while creating stock transfer order.
    For fullfilling this requirement, I have created new condition type(where i have changed condition category from internal price "G" to "H" - Basic Price)
    Instead of using condition type- P101 in the stock transfer pricing,I have used above created new condition type, in pricing procedure then also while doing the post good issue against the outbound delivery( move type-"641", moving average is getting picked up.
    Can you please tell,where is the setting where we can make the system to consider manual given price while creating the stock transfer order instead of picking moving average price.
    Its very Important requirement ,please Provide valuable Inputs else provide some alternative.
    Thanks & Regards
    Nitin Chhabra

    Stock Transfer Order between Plants in the same Company Cpde are not relevant for pricing, as there is no billing. Billing only takes place between company codes. As same company code it would be like selling something to yourself - it doesn't make sense.  The stock value in the receiving Plant depends on the price contol there. If standard price, then you must enter the price when creating the material or use material revaluation to change it. When you transfer the material from the issuing plant, the value there will be transferred. In case of standard price any difference is posted to stock transfer differences. If using MAP then the value will be transferred from the issuing Plant in full.
    If you use costing with standard price in main plant, then it is possible that you can transfer the cost from the main plant to the second plant, by using special procurement key for costing.
    Rgds
    Richard

  • STO - Two plants within Different Company Codes

    Hello,
    Kindly help me out with this case, i want to create a STO for two plants within DIFFERENT company codes, so i've created all the required configuration and master data including creating the supplying plant as a vendor and the ordering plant as a customer, also all master data is maintained in both plants and i tried the scenario on the IDES system and it works okay so i know i'm on the right procedures. The problem is that i create the PO, but when i go to Transaction Code VL10B to create the delivery it gives me an error ( Delivery with no Line item not allowed ) even though there is more than enough stock in the storage location. Kindly help me out.

    17.01.2010     Stock                            10.500,000      0,000      10.300,000
    13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
    17.01.2010     StLcSt     SLFR     10.500,000      0,000      10.300,000
    13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
    17.01.2010     BtchSt     123     10.500,000      0,000      10.400,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
    17.01.2010     BStLoc     123       /SLFR     10.500,000      0,000      10.400,000
    13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
    This is the whole table.
    This is what i got. i believe that it is an availability check problem, i just can't see what is the solution.
    SLFR is the Storage location of the issuing plant.

  • Urgent: Maintain std cost for plants under different company codes

    Hi all,
    Company code(s)/Plant(s): C1/P1, C2/P2, ..., CnPn
    BOMs and Routings are maintained under P1. I believe that unlike BOM routing can't be made available across plants. So how does one maintain std cost across plants under different company codes?
    Thanks.

    Hi,
    You have to maintain individual BOM, Routing and varaint for all plants.
    Best Regards
    Ashish Jain

  • Same plant serving two company codes

    hi gurus
    can any one share there experiance in configuring that single plant serving two company codes, requirement is need simple sto process for exchange of finished and raw materials between two company codes
    baalakrushnan.da
    sd

    HI,
    No, It is not possible. Even though u are doing STO process u need to mainatin two different plants. More you can not assign the same plant to two company codes.but u can assign more than one plant to one company code it is like N:1 relation ship..
    Please create one more virtual plant for stock exchange for other company code. Because Material valuation will happen at plant level only..
    Regards
    sankar

  • Valuation at plant level and company code level

    Hi,
    Can someone explain me the difference between the valuation at plant level and company code level with a real world example?
    Regards,
    Malsha Kalubowila

    Hi,
    Inventory can be valuated at two levels either at company code level or at plant level. If you select valuation at company code level, all materials across all the plants will have same material price since valuation is at only company code level.
    Say for example Company code 1000 is buying a material which unit price is Rs. 10 from a vendor who supplies to two different plant A & B of company code 1000.  Assume Plant A is situated near vendor premises itself (so freight cost is Re 1 extra)  whereas plant B is situated at far away from vendor place (so freight cost rs 2 extra) and both cases freight cost is borne by the company and not by vendor.
    Assuming you have selected valuation at plant level, now in plant A same material will be valauted at Rs. 11 (10 +1) whereas at plant B it is valuated at Rs. 12 (10+2).
    Whereas if you have selected valuation at company code level, price will not be valuated at plant level rather at company code level which will get updated at moving average price in this case.
    So it is always best practice to select valuation at plant level rather than at company code level.
    Reg
    Karthikeyan G

  • Plant convert to Company code

    Dear Friends,
    We have 4 plants under one Company code.
    Work is going smoothly.
    From FI point of view they want seperate transaction ,payment,profit & loss records with different Number ranges.
    For this they want 4 company codes for 4 plants.i.e.total seperation.
    Now tell if all is going ok since 1.5years then it is fisible to do that?any risk?
    If yes it can be done then please reply.
    Regards,
    Chandra.

    Hi
    Pls forget sap and think in general , is it possible to make the plants to each company code.
    with ur full fuctional knowledge.
    if you feel, you can. then in sap also we can do it .ok

  • Material Ledger activation (COML) - multiple plants in single company code.

    Hi -
    Material Ledger activation (COML)- multiple plants in single company code.
    In large mfg plant - process industry (proposed to dived into number of production plants), Matrial 'a'  is produced in plant 'a'.Material 'a' is input to procude matl 'B' in plant 'B"..so on and so forth.
    We are activating Material Ledger (COML) for actual costing purpose. Question -During multi level price determination, will the variance of lower level materials ( produced in lowerlevel /other plants in our case) be rolled up to higher level materials (in a different plant). please let me know if it really works, if yes what are the guidelines (if any) .
    Please advise ASAP.
    Thanks
    Chris
    Edited by: Chris Farr on Oct 23, 2008 11:12 AM

    Hi Chris,
    from a business point of view there is a  difference that you might take into consideration: The valauation level will always be on material and plant combination. That means, the division into several virtual plants will usually lead to different actual prices for the same material in each plant. That might happen for example when you carry over stocks from last month into the current month in one plant, while the other plant has only receipts from the current month.
    That might me desired, but often it is not. If the mutiple plants are in reality only one location it might be hard to explain why the prices differ between plants.
    best regards,  Udo

  • All plants Under specific company code

    Hi,
    What is the Tcode for All plants under Specific company Code.
    I Know about EC01 Navigation..
    But is there any other tcode available or not?
    Is there any table for all plants under company code?

    Go to SE11.. Give table name T001K..Execute... Give the company code in the field BURKS.. the result will give u all the plants under it....(WERKS is the field name for Plant)..
    Karthick

  • STO from Plant to Plant in same Company Code

    Dear All ,
    Please give me brief idea about STO(with screen ) from Plant to Plant in same Company Code
    ganga

    Dear Ganga Mukerjee
    Welcome to SDN
    There are plenty of threads available on this topic in both SD general,Sales and MM forums
    Please make a search
    As this is your first qn i am giving here with some simple steps for STO from Plant to Plant in same Company Code via SD route
    INTRA COMPANY STO.
    1. There should be two plants in the given company code for intra STO to
    happen.
    2. Assign Purchasing org of the ordering to the supplying plant.
    3. Create a customer in the supplying sales area.
    4. Assign the customer to the ordering sales area.
    5. IMG > MM > Purchasing > PO > Setup STO > Define shipping data for plants
    here go to supplying plant and mention its own sales area.
    6. In the ordering plant assign the customer created in the supplying sales area
    and also the supplying sales area.
    7. Maintain checking rule as 01.
    8. Assign the delivery type NL supplying plant checking rule and PO Doc type
    UB.
    9. Assign document type UB supplying plant and ordering plant then decide up
    on either 1 step or 2 steps.
    10. Create PO with doc type UB.
    11. Go to VL10B give the PO No. and enter, select the line item and click back
    ground. (Where Del. Will be created in the back ground)
    12. Go to VL02N for picking and PGI.
    13. If 1 step no need of doing MIGO else for 2 steps do MIGO.
    Hence forth make search
    Regards
    Raja

  • Stock Transfer Between two plants within same company code

    Hello,
    We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
    Plant A release PO for 100 nos to Plant B
    Plant B issues 100 nos (via delivery) to Plant A
    But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
    Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
    Now stock in transis (mb5t) is 50 nos.
    How to reduce this material document. or any another alternative solution for this?
    Thanks,
    Shailesh

    Hi There
    Reversal of partial is not possible ,
    But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
    Few more details on STO adjustments
    Hi There
    it can be settle in many ways,,,
    1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
    2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
    3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
    4. also you can check the below similar thread
    STO - material lost during tranfer from plant A to plant B
    5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
    6.Here is some more details
    557 Issue from stock in transit (adjustment posting)
    Only use this movement type (also the reversal movement type) under the following circumstances:
    Using movement type 557, you can correct purchase-order-independent stock in transit if
    - a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
    - stock in transit still exists, even though there are no open stock transfer orders for the particular material
    This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
    This movement type may not be copied.
    Note!
    Before using this movement type, note the following:
    - 392205 Analysis stock in transit / Correction if split valuation
    Possible special stock indicators:
    E, Q
    7. As previous post says if you have the note for this issue you can use that also
    You can use any one of the way to solve the issue, Hope it helps
    Cheers
    Senthil P

  • What is the configuration step assigen 2 plant to one company code

    hi all,
    i want assigen one code to 2 plants, what is configuration  step
    what is the special roll in chart of a/c, document number range,
    thanks in advance
    milind

    hi
    Milind Patil         
    You can assign no of plants to one company code .you can follow below navigation path
    --Enterprise Structure
    --Assignment
    --Logistics - General
    --Assign plant to company code
    Doubble click on assign plant to company code
    Enter following entries
    CO-CODE     -     PLANT
    1000             -     1000
    1000             -     1100
    AND SO ON----
    there is no extra settings in chart of accouts and document number ranges for assign morethan on plant to co code
    REGARDS
    TRINADHNAIDU.A

  • One common plant for 15 company code , is it

    Dear Friends,
    I have to make 15 company codes , but all company code have common plant that is centralised plant (1CEN) , but in SAP system does not accept it.
    System gives message- "this plant is allready assinged to company code - XXX "
    How can solve this ?
    Regards,
    Mahesh.

    Hi,
    One plant can not be assigned to multiple company codes, as plant/plants is/are company code specific
    The concept of company code is a business organization with association or collection of individual of real persons who each invested some form of capital. This group of individuals has a common purpose of installing plant; manufacture goods and sale the goods aiming for gaining profits which in turn company with company code is itself considered a "legal person". So in this system how other company code can come & do activities {Manufacturing, Processing, and Selling) in the same plant with same sales area.
    Regards,
    Biju K

  • How identify the data is client level,plant level or company code level

    Dear sirs,
    GM
    How identify the data is client level,plant level or company code level?
    If there is any T.code for same in SAP plz send me otherwise any procedure?
    Hopeeeeeeeeee....

    Hi,
    Once you gain experience, you will not look at any table any field or any view...You will do it just like how you use keyboard once you pass type writing....
    That is why every area of work, including master data is handed over to specialized teams...that will be their work day in and out....for some one newly entering, it will be little bit tough...once you practice, you will not be worried any more.  Of course, basic data at client level, purchasing data plant level etc...some thumb rules are there...still, you will take big blow by following such thumb rules because if you verify storage condition assigned in the storage location is not storage location level!!!!!!!!!!!!!!!
    that is experience!!  In this forum, it is good to practice rewarding...else, there may not be any more replies
    Good Luck
    Message was edited by:
            Gopala Turaga

  • Can we give same Excise Group to two diff.  Plant within same company code

    Hi,
    Can anyone please tell that whether we can assign same Excise Group to two different plants within the same company code in SAP.
    Regards,

    Yes you can use but, you shouldn't use same excise group for two different plants in one company code, if their physical location is different.
    As many excise report are fetched on the basis of excise group, there it will show combined values for both plants, whcih may not be acceptable to exices authorities.
    Regards,
    Sachendra Singh

Maybe you are looking for