Mass maintenance of Quality Insp tab

I want to add quality tab for approx 30 mat in material master , purchasing view, So can anyone guide me for the procedure?
Regards
Edited by: sapsarang on Jun 17, 2009 6:37 AM

Hi,
You can do it by using mm17
MM17-select table mara and marc-in field tab select field mara-qmpur(for qm procurement active), marc-ssqss(for qm control key) and marc-qzgtp (for certificate type).
than excute and enter material and plant you require than excute.
new screen appeare here in new values tab you can write all three value required for quality view. than  click on carry out mass changes button. and save.
for activation of inspection type you can do it throgh QA08.
Same way you can do it for purchasing.
Regards,
VJ
Edited by: vrunda on Jun 17, 2009 6:55 AM

Similar Messages

  • Mass Maintenance for flag in Status Profile (Quality Info-record)

    Hi Experts !
    I have thousands materials to change in mass the level in the status profile of Quality info-record.
    Unfortunately, QI05 - QI06 - QI07 don't allow to do this in mass maintenance mode. We can add, change or delete status profile but no more. You don't have access to the different level to apply for example LEVEL 3 (Ship to line) for all list of materials.
    Many thanks for your help.
    Stéphane

    Using your way, we can not change the flag with mass maintenance.
    You can just add a new one or delete an existing one.
    What I would like to do is :
    Change in mass maintenance all flag from Level 1 to Level 2 in Status profile of all existing Quality info-record or list of them.
    QCC2 is customizing for Notification.

  • Mass Maintenance of Maintenance Plans

    http://help.sap.com/erp2005_ehp_03/helpdata/EN/a1/5959394ba2cd4ae10000000a114084/frameset.htm
    Procedure
    If you want to change maintenance plans with the mass maintenance function, proceed as follows:
    1. Choose Logistics ®
    2. Plant Maintenance ® Planned Maintenance ® Maintenance Planning ® Maintenance Plans ® Mass Maintenance for Maint. Plans ® Mass Maintenance for Maint. Plans or use the transaction code mch01 and choose Enter. The Mass Changes for Maintenance Plans screen appears.
    3. Enter an appropriate variant name or your selection data in the areas of the screen called Maintenance plan selection, Maintenance item selection, Hierarchy or Work scheduling/task list data.
    Note
    If you want to make similar changes to data often, you can create a variant to ease data entry.
    4. Choose Execute.
    The Mass Maintenance: Table View screen appears.
    (The Mass Maintenance: Field View dialog box appears if you choose Execute field view from the Mass Changes for Maintenance Plans screen).
    5. Choose the appropriate tab page according to whether you want to make changes to the maintenance plans, maintenance cycles or the maintenance items.
    6. Select the objects that you want to change.
    You can select the fields that you want to change using the Select fields function.
    7. You can check your changes by using the Test changes function.
    8. Your changes are saved to the database when you choose Save.
    9. The system displays all the changes you have made and any errors that may have occurred in a log. You can save this log if you wish.
    Result
    Your changes have an immediate effect on all the selected objects.
    I have a need to enable this program which was delivered in one of the enhancement packs.  We have thousands of maintenance plans that need to be modified.
    A couple of questions:
    1) how do I activate as little as possible to allow me to use this program
    2) With this enhancement activated, am I going to be putting myself on a new support pack line.

    hi,
    I just know go to transaction SFW5 to check whether all components required for the operation of system are activated (switched on). But I do not know exactly which component is affected for this function.
    Hope it helps.

  • Mass Maintenance of MMR using MM17

    Dear Friends,
    can anybody explain the step by step procedure for material master customized fileds updation using MM17 tcode.
    i have an issue, client is having some customized fileds in MARA and MARC tables. he want to update that data using MM17 only. these customized fields are not available in the fields tab of MM17.
    how to make available these fields in the list and how to save that new values which are entered by user in to tables MARA and MARC.
    explain me the steps.
    Thanks in advance.
    Ravi.

    Hi,
    Refer following link;
    [Mass Maintenance processing - tcode MASS|http://www.sap123.com/showthread.php?t=158]

  • Mass maintenance of material master

    Folks
    I am trying to make mass maintenance to certain fields in the material master. I want to change the MRP type from PD to X0 for several materials.
    How do I accomplish this on single shot ?
    Thanks

    Hi
    Please follow the below steps to mass change your MRP type.
    1.Go to transation MM17
    2.Select MARC in the tab Tables
    3.Select MARC-DISMM in the tab Fields & Execute
    4.Input the materials & plants ehich under goes changes.Execute.
    5.You will get two section of screens.In the top you can see New values with emty field.you can give the new value.In the bottom you get the details of existing field for material/plant combination
    6.Click the button called Carry out mass changes
    7.Save and check the log for any errors.
    You have to consider the mandatory fields that affected during the change of MRP type.
    Hope you can do the changes now.
    Thanks / karthik

  • Mass Maintenance- Purchase Requisition block

    Dear All,
    Our client want to block hundreds of PR thru Mass maintenance tcode.
    Manually we block in status tab in PR. As lot of PR's are there, how to block with Mass maintenance tcode.
    Kindly advice how to do.
    Regards

    Hi,
    Use tcode mass to close all PRs in system . you can find object-(BUS2105-MASS_CHANGE_PURCHASE_REQ)
    To close PR,select all Mutilple PRs and Set  deletion indicator="L"
    But if the deletion indicator field (EBAN-LOEKZ) is not available in system.
    Then Use Tcode -MASSOBJ ,add this field .It will then appears in Mass Object-BUS2105
    This will resove your query.
    Thanks & Regards,
    Sandesh Sawant

  • Good issue using mass maintenance

    Hi SAP fans,
    I'm about to do good issue process using movement type 551 Scrapping.
    the users want to have 1 document number for 1 thousand material to scrap.
    is there any mass maintenance  for good issue ?

    Hi
    If you want to post large number of lin items in one document you need to use the BAPI - BAPI_GOODSMVT_CREATE
    condition being all the line items should belong to one plant....
    You can get more details on the BAPI  using T.code BAPI -> Materials Management -> Inventory Management -> GoodsMovement -> CreateFromData  here click on the documentation tab....
    Thanks & Regards
    Kishore

  • Customer Mass maintenance

    Hi Gurus,
    This is regarding transaction xd99 mass maintenance of fields in KNA1 table. I want a deletion flag and deletion block to be cleared for around 250 accounts(customers). I tried to do in xd99 by selecting the table KNA1 and fields KNA1-LOEVM (Deletion flag) KNA1-NODEL (Deletion Block) when I execute that. I was into the screen asking for new values and replace only. can anyone guide wat needs to be done after that?
    As it contains more thatn 200 records I cannot do that manually.
    Please throw some light on that
    Regards,
    santhosh

    Hi,
    In XD99, select the field KNA-NODEL and execute. The resultant screen will give you a screen where you can enter your customer list or give the selection criteria for selecting the customers.
    Provide the data here and again execute.
    Now all the list of customers will be shown.
    Now in the General data customer master tab, on the left most corner, there will be an icon called "Select Fields". Click this and then select KNA1-NODEL to the right hand side from left handside.
    Now the field will appear for you to change.
    Now on the top (not in the place where the customers are listed, but above that), either tick or untick the field based on your rqmt. While doing this, ensure that the entire customer list below is selected. Also the column which needs to be changed is also selected.
    Now click the 6th button in the General data customer master tab. This is the icon for "Carry out a Mass change"
    Now you can see the changes in the customer master list.
    Now you have to save it, unless saved, the changes wont take effect.
    This completes the procedure

  • What are the views/fields that we can't change by Mass maintenance of MMR(material master record)?

    Hello friends,
              I would like to know the fields/views that we can not change by using mass maintenance of MMR if there are open PO for that particular material in concern. Likewise there was a question in SAP certification exam having options: "base unit of measure", "material type" and so on....

    in general you can change any field that can be changed in MM02. if the field is grayed then you cannot. e.g. if you make use a MRP profile. and in this profile the maintenance of those fields is disabled then you cannot do it MM17 either.

  • Custom fields not getting updated in Mass Maintenance-MM17

    Hi,
    I have created a custom field in MARC table and the data is getting updated to the MARC table through MM01/MM02 but it is not getting updated by MM17.  I have checked the notes 44410, 576160, 414020 and 116311.  I have done the following changes as per the sap notes.
    1. Created a custom segment ZE1MARCM by copying the standard segment E1MARCM and added the custom field in that  
        segment.
    2. I have extended the IDOC 'MATMAS03' and added the custom segment ZE1MARCM to E1MARAM.
    3. Created a new entry in we82 and provided the extension type 'ZMATMAS03' and release '701'.
    4. Adjusted the partner profile in we20 for matmas with port and providing the extension idoc type.
    5. Added the custom field in the table MASSFLDLST.
    6. Implemented the code in BADI 'MG_MASS_NEWSEG' and exits 'EXIT_SAPLMV01_002' , 'EXIT_SAPLMV02_002' as per the 
        sap notes.
    The custom field is not getting updated through mass maintenance.  Please let me know if i have missed anything?
    Thanks,
    Geeta

    I had this same question several years ago. Please check my answer at Initialize MARC Custom Fields Using MM17 Does Not Work

  • Analysis Authorization mass maintenance

    Hi All,
    During the migration, due to Complexity of our complex BW 3.5 authorization setup we are end up in BI 7 New Design where we have to maintain new Cube to more than 150 Analysis Authorizations each time when we have new Cubes comes.
    Do you guys know any method where you can update the new cube to large no of Analysis Authorization (for ex 150) instead of doing manually? Due to complexity of the old design itu2019s very difficult for us to change the new design.
    Looking forward for expert opinion.
    BR,
    Deepak

    Hi,
    As per my knowledge, it is always recommended to maintain the Analysis authorizations individually. However, you may refer the below thread:
    Analysis Authorization Mass Maintenance
    and also the below link:
    http://help.sap.com/saphelp_nw73/helpdata/en/c4/057a2de519451faf1819dba4092887/content.htm
    Hope this helps!!
    Rgds,
    Raghu

  • Creation of New T-Code for mass maintenance of SA

    SAP currently does not have a facility to mass-maintain schedule agreements.  The business alone has over 16,000 schedule agreement lines.  Manual maintenance is very time consuming.
    There are some key items of data that can require amendent for a particular vendor.  The new program would permit the maintenance of:
    Planned delivery time                EKPO-PLIFZ
    GR proc Time                           EKPO-WEBAZ
    Firm Zone                                EKPO-ETFZ1
    Trade off Zone                          EKPO-ETFZ2
    Binding Grp                             EKPO-KZSTU
    Conf Control Key                     EKPO-BSTAE
    Vendor Material number           EKPO-IDNLF
    Stock type                              EKPO-INSMK
    Creation profile                        EKPO-ABUEB
    approach  from my functional consultant:
    basically i want to update the fileds on a  screen of   tcode : memasspo (mass maintenance of purchase orders )
    if i select pur ord item in the initial screen,
    it allows me to enter pur doc values and item values
    after that
    if i select fields symbol button on left side
    and i can select  fields which i have to be updated  in the right side in the Popup screen
    if i choose fields they will come along with pur doc and item in the screen
    My question is :
    pur doc and item values  with additional fields data is available in the flat file that should be updated
    pl let me know the approach to upload whether i go for eigther BDC or BAPI
    Note :
    i can update for newly added fields  in the  user defined SAP Screen  itself for porders
    but if i enter the purchasing doc as scheduling agreement no it wont allow you  to update
    i need to update for Scheduling agreements ?
    <removed_by_moderator>
    Thanks in advance
    Edited by: Julius Bussche on Sep 3, 2008 9:56 AM

    Hi Hariprasad,
    If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
    Also refer the link
    [https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation]

  • [Maintenance View] Mass maintenance of Z-Table

    Hi,
    I was wondering what were the options when dealing with mass maintenance of Z-table entries.
    SM30 is OK for maintenance view but you cannot process more than a given number of lines (34 entries or so) per page.
    Ideally, it should be possible to enter data from Excel file of even clipboard.
    SE16N is great for this since it allows pasting of clipboard data but it does not work with maintenance views (it switches to the SM30 dynpro).
    Besides, if I create a database view, it is not possible to save entries because it joins several table together (even if I only need additional fields for display only).
    I tried the FM 'SE16_INTERFACE' but it dumps with an CX_SY_DYNAMIC_OSQL_SEMANTICS error (SAPSQL_NO_DBTAB_OR_VIEW). (you can only query table or database view but no maintenance view)
    Thanks in advance for your ideas/advice.
    Best regards,
    Guillaume

    Hi,
    Developing a generic tool won't take much time probably 6 hours at an experience level of 2+ years!!!
    Once you develop you can use it for ever.
    What all you need to do is create a field-symbol of type standard table. Get the table name and the file from the selection screen.
    Create a dynamic internal table with reference to the table name entered in the selection screen. Upload the data and update the database.
    Limitations in the design:
    1. File should be in correct format and with the correct data. (Specific validations can't be done)
    2. Table maintenance events can't be tackled.
    eg: On entering the material number, Material description should automatically come.
    Creating BDC for SM30 is ok. But this works only at a table level. We may not be able to make it generic as the screen field names changes based on table name.
    So think and choose the right approach!!!
    All the best:)
    Thanks,
    Vinod.

  • Restrict change authorization for MM17 (Material master mass maintenance)

    Hi,
    Apologies if I have posted this in the wrong forum. I want to know if it is possible to use the mass maintenance transaction MM17 (indus. material) to display data only istead of change/create. Is there some setting at the basis object level which can enable this? There are currently a lot of custom abap reports and queries in our system for viewing material master data, these can all be replaced by MM17. Basically we want to use MM17 as a reporting tool to display data only. Is a solution possible? Help is appreciated, thanks.
    Regards

    Have you tried the MM Information System node in the SAP Easy Access menu? There are a bunch of standard reports with navigation options there, for the user who has the correct authorization to display only.
    Alternately, you may want to take a look into transaction MASS and use the B_MASSMAIN object, depending on your requirements - but test it well.
    Cheers,
    Julius

  • Mass Maintenance will recognize any customer record in workflow process

    Hi gurus,
    Please help me on the Workflow process, how to handle below workflow  scenario,  is there any logic be hand this.
    please see in BOLD workflow issue.
    1.2     As-Is Business Process
    Currently Data Maintenance teams use standard SAP transaction XD07 to change Customer Account Groups. The standard transaction XD07 allows only one Customer Account Group to be changed at a time. The process is to be manually repeated for every customer. After the Account Group is changes in the request client (X07(10)), an RFC call is made to the BOR client (X07(20)) and then to the transaction client  (X08(10)) to change the Customer Account Group as the SAP ALE process does not support Account Group Changesu2026
    1.3     To-Be Business Process
    From time to time, bulk customer data updates will be needed. This can be the result of business situations that cause multiple updates to be performed for given customer fields such as Customer Account Group field. A new program must be developed to let the user mass update the Customer Account Group field (KNA1-KTOKD). The Program should be accessed on demand using a new T.Code (YMDM_ACCTGRP_CHG).
    Business users will submit a spreadsheet in the appropriate upload format to CDM along with written approval from the Food Service data owner to execute the upload in P07. CDM will execute the upload, record all documentation for the audit change log and notify the submitter when complete
    1.4     To-Be Business Process Flow Diagram
    1.5     Enhancement Functionality
    The following are the requirements:
    u2022     This tool will enable a user to perform bulk update to the customer account group field.
    u2022     The utility should let the user upload a u201CTab delimitedu201D file to mass update the Account Group field.
    u2022     The Load File will have 3 columns, Customer Number (KNA1-KUNNR), Current Account Group (KNA1-KTOKD) and New Account Group (KNA1-KTOKD).
    u2022     The Program must utilize the process behind the standard SAP transaction XD07 to change customer Account Groups in X07(10).
    u2022     The standard customer ALE (DEBMAS) process does not support Customer Account Group changes, so the mass change program must use the RFC functionality to change he Account Groups in the BOR (X07(20)) and Transaction system (X08(10)).
    u2022     Workflows for all updates performed using this T.Code are automatically approved.  No manual approval steps will be needed after data load.
    u2022     Mass Maintenance will recognize any customer record that has an open workflow. If a customer record is already in the request queue, it is u201Coff limitsu201D for any bulk update. That update request to that particular customer record must be rejected.
    u2022     Provide the option to run the process in validation mode and update mode.
    u2022     Report all hard and soft legacy field errors on a validation report.  All u201Chardu201D legacy field validations should be passed before allowing update mode to run.
    u2022     The upload process will produce an error log for all records not loaded into the system.

    see newer message. Problem appears to be related to gmail

Maybe you are looking for