Mass maintenance of storage locations

Hi,
Do we have any T code in SAP for mass maintenance of storage locations in plant wise.
T code MMSC is for mass maintenance of storage locations w.r.t. materials...
My requirement is mass maintenance of storage locations in plant wise..
Pl help..
Uts

hi,
What exactly you wanna do with the storage location...
If you don't wanna use it further for a plant, and even wanna retain it...then you can jus change the name so it will be automatically blocked under a plant....
Regards
Priyanka.P

Similar Messages

Mass Maintenance of Functional Locations !!!

Hi,
Mass Maintenance of Functional Locations in ECC6 EHP3.Any pointers?Dont want to go thru the LSMW path. Precise and specific information required.
Thanks.

Is EA-PLM active in transaction SFW5?
http://help.sap.com/erp2005_ehp_06/helpdata/en/46/4ad530501c0db6e10000000a1553f6/content.htm?frameset=/en/46/48e37af6513a66e10000000a114a6b/frameset.htm
PeteA

Mass update of Storage Location

Hi Gurus,
I've executed mass transaction MMSC_MASS for extending the storage location to 0002 and 0003.
How to exclude these storage location to exclude in MRP run ?
Can it be done anywhere in material master ?
Please throw some idea on this.
Thanks
Aadhya

Hi,
Storage loc MRP indicator can be maintained in material master - MRP 4 view as shown below. You can maintain the indicator as 1 if you want to exclude the storage loc from MRP.
Check the documentation for the field and proceed.
Regards,
AKPT

Create storage locations

Hi,
       There is a requirement to do a mass creation of storage locations. While creating a storage location, I have to upload data such as
1) Address realted data for storage location(Name, streetm Postal code,city
2) storage type, storage section, print params from storage location
3) WM connect, MRP, fixed bin assignment
    Is there any BAPI that suits this requirement.
What is the tcode for storage location creation and updation of this data.
Thanks in advance,
Vishnu Priya

Hi,
            In OX09 tcode on the left pane, if the 'Address of storage locations' is selected, I got a list with a field labelled 'No.' Is that the address number? Where do I need to update the street/houseno, postal code, city details etc.
Thanks for your quick replies.
Regards,
Vishnu Priya
Message was edited by:
        Vishnu priya

Mass Storage Location Extention in Material Master

Hi,
Would like to how to do mass extention of material for storage location.
Regards,
Vengat

hi
use trannsaction code MMSC this willbe plant specific
or use MMSC_MASS
regards
kunal

Extend the material for the storage location in mass.

Hi,
Can any genius let me know how can I extend the material for the storage location in mass.
Currently our support team doing it by trx MMSC, but now we required to extend the materials for storage location in mass for which MMSC is to lengthily
Is there any other way apart LSMW for MMSC.
Regards,
Shyamal.

hi
did u tried mass
try this
go to MASS
then select BUS1001
go to plant data for material execute
click on data records to be creatd
then add material in field
then select select field button and add storage for extrenal procurement then there u will find on filed for external proc
now do mass change
reward if helpful
regards
kunal

Mass extension of article to another storage location

Hi All,
How can we extend article to another storage location in Retail...like MMSC tcode in Standard R/3.
for ex: Suppose we have 100k article already exist with storage location "0001", Now we have to extend it to Storage location "0002".
helpful answer will be rewarded.
thanks & Regards
saurabh dubey

Dear Saurab,
Manish is exactly right here, we need to create a simple BDC with artile, site, Sales org, Distribution channel and storage location (new one for extension) to get it done as MM46 (MARC-LGFSB) will change/update the values from existing status rather than extending the new values.
Also we Can't use MMSC or MMSC_MASS with Retail Articles.
I hope your query is being answered.
Regards,
Kunwar

I want to exclude a storage location from MRP

I want to exclude repair storage location from MRP so that the stock with repairs storage location should not be considered for other demands.
Also repair storage location stock should not be calculated against 'stocks' term in MD04.
How to do this ? Pls share.

Hi,
In transaction OMIR, choose your plant & then for the storage location you want to exclude from MRP enter 1 (exclude from MRP).
After this setting is maintained, whenever a material is created in this plant & storage location, it will have MRP indicator as "1" in the mrp 4 view .
For materials already in this storage location if the MRP indicator "1" is not maintained in mrp 4 view, please go for a mass change maintenance in the material master & maintain this indicator.
Stock in the excluded storage location will not add up to the stock which is displayed in the top in the md04 screen. This stock will be displayed separately in the bottom of the screen.
Please let me know if you have any questions.
Regards,
Senthilkumar

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

Can PIR created at wbs element and MRP area of storage location level

Hi,
I tried to create an planned independent requirement at MRP area and WBS element level, but failed. The MRP area is not plant level, but storage location level.
*When trying to create account assignment category Q for it, then there is an error message saying:*
**only stock requirements are allowed when planning at MRP area level.**
Does it mean it is not possible to create planned independent requirement for this case?
Thanks!

Select the "Issue storage location" as '2' here:
spro -> production -> material requirement planning -> mrp groups -> overall maintenance of mrp groups -> overview -> mrp control parameters at material level -> (field) Issue storage location selection
& make sure:
1. In the BOM issue storage location is blank for the components
2. For the FG products , in mrp area prod.storage loc is maintained
3. Components are extended to the mrp area.
Pl. revert with the results

Automatic storage location view creation in maintenace order (IW31)

Hello,
Seems like I need some help.
Have configured automatic storage location view creation for GR and reservation. Configured movement types are 101, 201, 261. While creating reservations (201, 261 mvmnt. types) with mb21 the sloc view is automatically created in material master, and everything seems fine.
But in iw31 when I specify material number and sloc in a Components tab, I get an error message CO312: "The storage location data is not created". Automatic reservation is not created, and maintenance order can not be saved. Movement type 261 is used for automatic reservations for the maintenance order.
If I configure message CO312 as a (W)arning message, then it allows me to save the order and reservation, but sloc view in material master still is not created. Think that's not good and may lead to MRP issues.
How can I configure automatic sloc view creation in iw31? Is that possible?
Edited by: Konstantin Dudura on Nov 17, 2009 8:11 PM

Hi,
The customization required for Automatic Storage location creation at reservation are:
Goto : SPRO -> MM -> inventory Management and physical inventory -> Goods issue/ Transfer posting -> Create storage location automatically
first of all go to Plant and tick the automatic Storage location creation for the Plant. After that goto Movement type and tick the automatic Storage location for movement type 261.
Regards

BADI for storage location restriction in IW32

Dear All,
I am working on one scenario in this user has to get the error message :-
1. Whenever he doesn't enter the Storage Location in Component Tab (in IW32) and also he should not be able to save the Maintenance Order.
2. There is ZTABLE (ZTPM058) , if there is no entry of the Storage location in the ZTABLE then also he should get the error.
I have used the BADI BADI_DI_PCS2_1 to do this but the problem is when the user enter the component manually then it works fine , but when he selects the component from List button (it is in the bottom of the component tab screen) , then this BADI doesn't work correctly.
Basically when the user selects component from List then it should first put data into the component tab and then give the error . but this is not happening.
Please suggest what can be done.
Below is the code that I have written :-
l_ucomm = sy-ucomm.
if diad_resbd-MENGE is not INITIAL.
SELECT SINGLE ingpr         "Plant Section
                lgort         "Storage Location
          INTO (l_ingpr,
                l_lgort)
          FROM ztpm058
         WHERE lgort = diad_resbd-lgort
           AND ingpr = diad_caufvd-ingpr.
IF sy-subrc <> 0.
if l_ucomm <> 'IMKL'.
   CONCATENATE 'FOR ITEM NO'        diad_resbd-posnr
               ', COMPONENT'                   diad_resbd-matnr
              'AND PLANNER GROUP'       diad_caufvd-ingpr
             'THERE IS NO STORAGE LOCATION' diad_resbd-lgort INTO txtmgs SEPARATED BY space.
    clear l_ucomm.
    clear sy-ucomm.
    MESSAGE txtmgs TYPE 'E' .
    elseif l_ucomm = 'IMKL'. (OK CODE when user press List button)
         CONCATENATE 'FOR ITEM NO'       diad_resbd-posnr
                    ', COMPONENT'                   diad_resbd-matnr
                    'AND PLANNER GROUP'      diad_caufvd-ingpr
         'THERE IS NO STORAGE LOCATION' diad_resbd-lgort
INTO txtmgs SEPARATED BY space.
    clear l_ucomm.
    clear sy-ucomm.
    MESSAGE txtmgs TYPE 'W' .
    endif.
    endif.
    ELSE.
    message 'Please enter the Quantity' type 'W'.
    clear l_ucomm.
    clear sy-ucomm.
    endif.
Thanks and Regards,
Rachit Khanna

Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi

Outbound Delivery and Storage Location

hey everybody,
this is our status quo:
we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
we need a solution for our new scenario:
in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
here are the steps:
1. outbound delivery creation
2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
3. the packer is packing the material physical and within SAP in the new created handling units
4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
does anyone has an idea for us?
another information: we don't want to do the material movement manually
best regards & TIA
chris

Dear,
As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
If it has to be done, you need to update the "Outbound delivery" with new storage location before posting the goods issue.
Is there any business advantage with this new process,If so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
Details as Follows:
Step-1:
While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
Step-2:
Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
Step:3
Then do "Post goods issue".
Regards,
pardhu

Consignment stock in an storage location for one customer

We have one procedure for consignment to customers. We create one sales order type KB (consignment fill up), and after receiving the material after creating PO and inbound delivery, we create the outbound delivery and then goods issue to send the material to the customer.
With the current procedure, we are not currently able to distinguish between the consignment for the sale and the consignment for maintenance purpose, as for a few customers, we want to keep the material located in one storage location created for that special customer so it appears in the inventory separated from the general current customer consignment. With the current procedure, once the GI is done, the material goes to customer consignment and does not appear in any storage location.
Do you know how we could create the new procedure?
Thanks and regards.

if we want to retrieve the material from customer consignment to unrestricted
Either you can create a consignment pick up and a return delivery or reverse the original delivery so that the stock would be increased in the parent plant.
For more details, check this thread
[Return consignment stock to blocked stock|Re: Return consignment stock to blocked stock]
thanks
G. Lakshmipathi

Making Storage Location field mandatory in Work Order

Hi
As per our proces, if PR is created from work order and if there is no storage location in work order then PO will have warehouse address as a shipping address. So it is expected that PR must have storage location details when it is created from work order to avoid incorrect shipping address in PO.
So, I want to make storage location field mandatory in components tab of work order.
Also I want to avoid the users to deliberately removing the storage location and making it blank.
Regards
Prakash

Hi,
You will have to use one of the below mentioned user exits to accomplsih this requirement.
CNEX0026 Maintenance order: General check for material
CNEX0027 Maintenance order: Determination of plant or storage location for component
Thanks
Narasimhan

Mass maintenance of storage locations

Similar Messages

Maybe you are looking for