Mass output printing problem " VF31"
Hi
I am unable to do the mass printing of my ZCMR & ZDMR output type. Whn processing it giving me the error message "No messages for initial processing exist"
Please suggest
Best Rgds
VK
Hi,
First go to VF02 and go to menu Go to / Header / Output
check whether there is a output appear as a line and the whether the status is Green.
If there is nothing appear there. Please add the output manually there and try to get the printout by filling relevant data in "Communication Method" and "Further Data" buttons.
If you can get the print without issue, then do below.
Go to VF31.
Set "Processing mode" as 2
Mark relevant tick boxes.
Then execute and see.
Thanks and best regards,
Anupa
Similar Messages
-
Hi.
I'm trying to get an output print to a local printer. I am getting this message "Frontend unavailable" when I try it using my ID.In output controller STATUS TEXT is cuming FRONTEND UNAVAILABLE.
Can u help me so that i din't get this message FRONTEND UNAVAILABLE.hi rishu
is ur program run in background?
thanks
Sachin
Edited by: Sachin Gupta on Jul 28, 2009 5:26 PM -
Reports 3/6i HTML Output Print problem
Hi!
I am using Reports 3 to generate HTML output but when I print this HTML output, it does not break at Oracle Reports Page break. It looks like the browser takes its default settings for margins. I am using IE 5.5.
I tried the following options
1. Using { page-break-after: always } option in 'After Page Value' of Report Escapes property (Report)
2. Changing margin settings of browser, but was not able to change them to 0.
I want to print the HTML report with page breaks where Oracle marks as Page Break.
If possible, Please do write me at [email protected]
Thanks,
Praveen KumarPraveen,
When you generate a HTML page in Reports, you are generating a single page document that is then intepretted by the browser. You are correct that when you then print this page from the browser then it will not necessarily break at the same point as the reports page breaks.
The only way to guarantee that you will get the same breaks is to use a different format. Most commonly people use PDF format when they want the printed page to match exactly what's on the screen. Alternatively you could include a link on the HTML rendition of the report that resubmits the report to the server but instructs the server to print the report directly.
Hope this helps,
Danny -
Consignment fill-up - Output Printing Problem - Z customizing problem
Dear Gurus,
I have customized and copied the following 2 sales documents types:
- OR
- KB
into ZSTA and ZKB
When I create a Sales Order using VA01 and ZSTA, and chose 1 material + 1 service, the printed invoice clearly shows 2 items for each one of them.
When I create a Sales Order using VA01 and ZKB, and again chose 1 material + 1 service, only the material appears on the invoice and not the service...
Does anyone has an idea about where the problem might come from?
Your help is greatly appreciated.
Thank you
Chris.Hello Lakshmipathi,
I give you more information if it might help you:
These are the item categories that have been created into the system for ZKB: (Consignment Fill-up)
ZKB TEXT TATX
ZKB LEIS ZTAW TAD
ZKB NORM ZKB1
These are the item categories that have been created into the system for ZSTA: (Standard order)
ZSTA TEXT TATX
ZSTA TEXT TAC TATX
ZSTA TEXT TAM TATX
ZSTA TEXT TAN TATX
ZSTA TEXT TANN TATX
ZSTA TEXT TAP TATX
ZSTA TEXT TAQ TATX
ZSTA 2 TAC TAM
ZSTA 2 TAC TAE
ZSTA 2 TAE TAE
ZSTA 2 TAM TAC
ZSTA 4 TAM TAC
ZSTA 4 TAC TAE
ZSTA 4 TAM TAM
ZSTA 5 TAO
ZSTA ALEN ALEN TAN
ZSTA ALES ALES TAN
ZSTA BANC TAB
ZSTA BANS TAS TAN TANN TAW
ZSTA DIEN TAX TAW
ZSTA DIEN TAN TAX
ZSTA ERLA TAQ
ZSTA ERLA TAP TAE
ZSTA ERLA TAQ TAE
ZSTA LEER TAU
ZSTA LEER TAQ TAZ
ZSTA LEIC TADC TAW
ZSTA LEIC TAN TADC TAW
ZSTA LEIH TAL TAN
ZSTA LEIH TAN TAL TAN
ZSTA LEIH TAX TAL TAN
ZSTA LEIS TAW TAD
ZSTA LEIS TAN TAW TAD
ZSTA LUMF TAP TAQ
ZSTA LUMF TAP TAN
ZSTA NLAG TAX TAW TAD
ZSTA NLAG TAN TAX TAW TAD
ZSTA NORM TAN TAP TAQ TANN
ZSTA NORM TAC TAE
ZSTA NORM TAE TAE
ZSTA NORM TAG TAN
ZSTA NORM TAM TAN
ZSTA NORM TAN TANN
ZSTA NORM TANN TANN KBN
ZSTA NORM TAP TAN
ZSTA NORM TAQ TAE
ZSTA NORM APO0 TAPA TAN
ZSTA NORM APO0 TAPN TANN
ZSTA NORM APO1 TAPA TAPN
ZSTA NORM APO1 TAN TAPA
ZSTA NORM APO1 TANN TAPN
ZSTA NORM APO2 TAPA TAN
ZSTA NORM APO2 TAPN TANN
ZSTA NORM APO3 TAPA ALES
ZSTA NORM CSEL TAN TAN
ZSTA NORM FREE TAN TANN
ZSTA NORM PSA1 TAPA
ZSTA NORM PSA2 TAPA TAN
ZSTA NORM PSEL TAX TAPS
ZSTA NORM PSHP TAX
ZSTA NORM SLSV TALS
ZSTA NORM SLSV TALS TAUL
ZSTA SAMM TAG TAN
ZSTA SAMM TAG TAN TAS TAB
ZSTA VOLL TAQ
ZSTA WERT TAW
ZSTA WERT TAN TAW
Please let me know what your thoughts are. Remember that the problem is that on the final invoice, we can only see the price for 1 or more selected materials in ZKB and no services at all.
Thank you
Chris. -
Convert the smartform output to PDF when giving print from vf31
Hi Gurus,
I am facing one problem.I developed the program to chnage smartform output to PDF file when giving invoice print from VF02/VF03.
The same functionality i want to appy when i am giving print for the invoice through VF31.
I put the break-point in the driver program.But it is not stopping there when i am giving print from VF31.
How can i do this one..
Please Help Me.
Thanks &Regards,
R.P.SastryWhich Program you are putting the Breakpoint?
-
Crystal report printing problem in Malayalam
Hi,
I have a printing problem in Malayalam in crystal report.The viewer displays the correct font but the printed output displays the square boxes.I have installed the font.I am using Visual studio 2010 and crystal report 13.0 version.what could be the problem???
please help me...!!!Hi priyashekar,
I’m afraid that it is not the correct forum about this issue, since this forum is to discuss Visual C#. You can post your question in the
Crystal report forum: http://scn.sap.com/community/crystal-reports-for-visual-studio/content?filterID=content~objecttype~objecttype[thread]
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Leopard printing problems on several printers (Am I the only one?)
Since installing Leopard shortly after it was released, I've had flakiness with printing:
- With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
- When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
The printers that are permanently in my Printer List are:
Canon i9100
Brother MFC-8840
Epson Stylus Photo 220
HP LaserJet 1320N
HP LaserJet 8800
HP LaserJet 6570
HP Color LaserJet 5550
Adobe PDF 8.0
All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
http://discussions.apple.com/message.jspa?messageID=7013209#7013209
I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
Thanks,
DavidI'm having exactly the same problem with a Lexmark C760.
When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good? -
Goods Receipt Note - printing problems
Hi there
I have a couple of issues regarding printing problems for Goods Receipt Notes.
The 1st problem
Only the first line item is printed on the GRN, all the other line items are omitted from the GRN.
The 2 nd problem
When doing a Non-stock item GRN it does not print at all.
The 3 rd problem
Our stock count sheet only print 300 line items at a time and it is also not in sequence.
Another printing problem is with our picking list
Here what happens is that instead of the picking list skipping the "perforate section" at the end of each page, it just continious printing one stroke through without any intervals.
Then the last issue but with printing of Reservations, is that even though we have zero stock on hand, the reservations are still being printed. This causes a problem not only waisting paper, but we have to go through those lists to identify the actual reservations that can be issued.
Please can anybody help?
Regards
Sonjain NACE Tcode
u can Find
choose ur application and press output type...
select ur output type and press processing routine...
u will find the progran name and form name..
if it is usefull plz reward
Regards
Anbu -
Mass output of SD Invoices..?
Hi,
I apologize for the newbie question, but I've searched the NW 7.02 IS-U ERP System, the SCN and google up and down for good part of 2 days already... By now I'm reduced to staring blankly at SD70AV3A and WFMC_ function modules. Could you confirm or dispel my fears please: is there really nothing besides VF31 in SAP ERP to do mass output of SD invoices out of the box? Or am I just failing miserably in my searching..?
And if that's the case, how would you go about trying to organize mass output into something that has identifiable, user scheduled "Output Runs", with protocols stored in application logs - program everything from scratch, program on top of WFMC_ FMs, on top of something else?
I'm simply looking for opinions of people other than those who help us with the maintenance of this SD thing here...
Thank you
JānisThanks Suneet and Seegal. Yes, I've seen RSNAST00 too, and one can execute SD70AV3A in background too. My main beefs with the offered functionality are:
- there seems to be nothing persisted anywhere that could be called "SD Invoice Output Run" - something that says: on so and so date and time, with such and such parameters, so and so executed invoice output run, which processed these Invoices;
- so far as I can see, the NASTy protocols are not persisted as Application Logs, so I think I can't easily set up EMMA/BPEM exception/clarification case processing for these processes (FM WFMC_PROTOCOL_SHOW does transform the protocols to Application Log temporarily, to display popup; FM CM_F_TRANSFER_INTO_APPL_LOG has no static uses in our system)
And the one thing to expect during mass output in my experience is exceptions and the need for clarification - lots of it. There may perhaps be ways how I could program own logic to get EMMA/BPEM to work on NAST stuff, but then I could of course try to program the whole SD invoice output application from scratch as well...
I may be too used to IS-U/FI-CA way of doing things and/or too impatient in expectting the results after looking at stuff for couple of days, but I expect any "Mass Activity" to result in an identifyable and persisted "Run", which lets to to see the start parameters, the stuff it processed and the Application Logs (no, SM37 Job is only a poor replacement for that). The self-learning process for SD output processing seems to be very difficult... my initial (and perhaps too hasty impression) of the functionality is - this is "stone-age" . I've reacquired lots of respect for IS-U/FI-CA developers from looking at SD Invoice output and now think that it was a collosal mistake not to try to integrate SD billing documents into IS-U Invoicing...
Thanks again and cheers
Janis -
Printing problem in Dot matrix printer
Hi all,
We are planning to use Dot matrix printers for printing through SAP.We do front end printing using Windows OS. I am able to get prints properly if it is a script form. In case of list outputs, printer is printing the text outside the paper.Only half of the text is printing on the continuous stationary. Actually document is to be printed in Landscape format. So printer should print data vertically on the paper,but it's printing horizontally. I have created sparate output device for this printer.My printer is TVS Electronics HD745 24 Pin heavy duty printer. I have assigned OKI341 as device type for this device.Any more settings I need to do to get printing in landscape mode?Hi,
Dot matrix printer.
Problem with pritning with dot matrix
About Dot matrix printer device problems
Regards,
Sandeep -
Landscape page printing problem in report 3.0
Hi,
I am facing the problem in printing the report output on the
landscape page from report 3.0.I have changed the system
orientation property from default to landscape.But still report
output printing on as a portrait page.
Is there any another way to print the report output on the
landscape page ?
Thanks
MohammadHave a look at System Parameter Orientation in your affected
Report.
I think from Reports 6i on you'll also have the Orientation
Property in Header-, Body- and Trailor-Section of Layout Model. -
Hi there,
Today, i struggled with one printing problem. can anybody help me please!. We are preparing reports using reports 10g. I created a report with orientatin of Landscape and Paper size is 11.5*8.5 that is A4 size and right margin 0.2 left margin with 0.2 and top and bottom margins with 0.5.Report output is correctly coming in report builder runtime. Now the actual problem is, this report must linked to one server for example http://xx.xx.xxxx.main.html.we linked the report generated by me to this link.
when i run the report using this weblink, report is displayed in htmlcss(i opted) perfectly,now user can take the printout of this report by clicking print from file menu. The actual problem i faced is when i run this report in html link report is correctly displaying but paper size is letter and page margin are right 0.75 and left 0.75 defualtly. When i print the report with these setings date is truncating when user takes printout in html. User don't know the page margins i.e right o.2 both left and right (actually in report builder). So he cant adjust it correctly in file menu pagesetup in html page.He simply click print and it should come as with report builder margin settings. To solve this i change the default preferences in control panel ---printers, but no use. Is it possible to pass margins both right,left and top bottom margins as runtimeparameters in url of the this report. Is there any alternative way.
Please do reply urgent, becoz since this is my clients urgent requirement,help me
Thanks and regards
thanx in advance.
JeevanHi,
Though HTMLCSS pages are created using the same page margins that you specify in the report definition, the problem may become more clear to you if you try to create PDF files instead of HTMLCSS. Set DESFORMAT=pdf, and see the output PDF file in Acrobat Reader. Do you see the margins that you want, or is the problem still the same? If you don't see the correct margins even in the PDF file, it probably means you need to modify your report definition to get the margins you want.
In case you see the correct margin in PDF output, it means that your report design is fine. The problem is with printing. In that case, I think what other people have suggested you is true - probably the printable area for your particular printer is less than what you want.
I'm afraid I may not be the best person to specify the printer or OS settings. Please consult your printer vendor.
The other option may be to get output in PDF format, and print PDF files.
Navneet. -
Continuing printing problems with LR 1.3.1 (magenta)
Downloaded/installed the .1 version of 1.3 hoping that it would "fix" the magenta tinge associated with printing thru LR print. It did not. Still the same magenta tint. Although most of the discussion in previous threads had to do with MACs, I'm running a vista PC. This is a new PC ... previously had an XP PC running version 1.2 ... no issues. Do the issues identified for MACs also apply to PC users? Also not printing to an Epson printer, but to an HP B9180. Thanks.
Sorry I'm a bit late to this thread. Erik and Samora, I am glad that you solved the Lightroom / HP B9180 printing problem. Please keep this forum posted about HP followups or any future printing problems you may have.
Not to jinx you, but I have been down that road before. I started out with Lightroom printing with the magenta tint, mentioned by many others. I didn't understand what was happening since I had a managed workflow on my XP machine, and PS CS3 made excellent prints on the B9180. I spent much time on this forum looking for answers. Finally I thought I found the answer and changed the default printer to the B9180. (See http://www.adobeforums.com/webx/.3bca1a12/8 for the full info.) Unfortunately, the good news didn't last. Within a couple of months Lightoom returned to its former bad behavior.
I think there is an insidious problem here with Lightroom, much more than people simply not selecting the correct profile or not understanding color management. What works for some people does not work for others. What worked at one time for me (see the above reference) now longer works. It seems that most people do not have a problem but others have great problems that apparently defy logic. The Lightroom bug bites Epsons, HPs, and Canons, as well as both Windows and Mac machines. After hours of analysis and testing, the best I can come up with is: "it just doesn't make sense." (I say this with tongue-in-cheek since I'm a highly-analytical person.)
After a couple hours of test printing, all unsuccessfully, I tried to reduce possible conflicting issues by deleting from the B9180 color management properties all profiles, except the HP PSPro B9100-Advanced Photo Glossy; this is so Lightroom could not inadvertently select another profile. I made sure that the B9180 printing preferences was set to Application Managed Color. Then I made sure that the profile selected in the Lightroom Printing module was HP PSPro B9100-Advanced Photo Glossy. Still the magenta tint. I also get the tint using a custom profile from InkJetArt for one of their papers. I do not get the magenta tint when I send Lightroom output to my old Epson 1280, which I also have connected to the computer (parallel cable instead of USB). It just doesn't make sense. -
Printing Problems GI Slip and GR Slip
Hullo fello Sapians
I have printing problems regarding the above. When I have only one output type configured eg WA01 and no WE's the goods issue prints perfectly however the GR slip also prints but in the form of a returns delivery note. I have not created any Returns delivery slip in the system. What could the possible causes be
I have exhausted all the config checks and its 100% so I think
Vishnu
SAP MM ConsultantHi
Set the parameter ID NDR in the user master record to X.
This makes the print check box to be defaulted to X.
Now you should be able to print the GR from VL32N.
I hope this helps.
Thanx
Prasad -
Lpq outputs print jobs + error T: unknown: moving-to-paused +
Dears,
I have setup remote printing, printing from the client show the print queue at print server(T) however command does not get executed and it outputs
print jobs + error "T: unknown: moving-to-paused"
When is triggered lpstat command before printing
# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T is idle. enabled since Sun Feb 19 12:03:31 2012. available.
When is triggered lpstat command After printing
bash-3.2# lpstat -t
scheduler is running
system default printer: T
device for Alis: /dev/ecpp0
device for T: /dev/lp1
Alis accepting requests since Wed Jan 25 14:27:39 2012
T accepting requests since Wed Jan 25 14:39:03 2012
printer Alis is idle. enabled since Sun Feb 19 11:23:34 2012. available.
printer T waiting for auto-retry. available.
Failed to open the printer port. (Device busy)
T-80 [email protected] 201097 Feb 19 12:28 f iltered
T-81 [email protected] 600569 Feb 19 12:28 f
lpq
===
bash-3.2# lpq
T: unknown: moving-to-paused
Rank Owner Job File(s) Total Size
1st appltest 80 /global/u02/oracle/TEST/inst/app201097 bytes
2nd appltest 81 /global/u02/oracle/TEST/inst/app600569 bytesHi Freind,
I hope you are doing good.
Q1l:-
Are these printers really physically attached to your Ultra-* parallel port (/dev/ecpp0)?
and what device is "/dev/lp1"?
Answer:-
"/dev/lp1" which is printer "T" and "/dev/ecpp0" which is printer "Alis" are configured at OS level via "printmgr" on the same machine.
This machine hostname is "tprinter" which is a print server. It is connected physically to "CIMA6120 LINE PRINTER".
[what I meant is: what physical port is this printer attached to on the Solaris machine? is this a Ultra 5/10/60 machine? I don't recall the /dev/ecpp port
existing on any modern sun hardware]
"failed to open printer port" can mean:
Answer2:- It's is a 25 pin serial port cable connected to 25 pin parallel port of Optiplex GX100 machine. I installed solaris 10 x86 to make print server. as our CIMA6120 its not a network printer, and our company want to print reports from oracle application to this printer.
Q:-you have attached your printer to the wrong port?
Answer: it is connected to the correct port.
[again . . how do you know this or test this?]
Answer2:- it is connected at the rare panel of the machine on a 25-hole connector (bidirectional).
Q:-you have attached your printer to the right port, but are using the wrong name?
Answer: I think we could have Alias, not necessarily give the same printer name.
[what i was getting at here is that you think the printer is attached to the parallel port, but actually the cable
is actually attached to the wrong port. For example the serial port on those older machines will fit but in that case, if you configure the printer with ecpp
it's not pointing to the correct port]
Answer2:- I configured CIMA6120 with "/dev/lp1" port which was perfectly working, I print numerous pages with this configuration, Suddenly this error "moving-to-paused" occurred. as i said it is connected to the parallel port at the rare panel. Initially, I attempted and tried to configure this printer with "/dev/ecpp0" port which was not successful.
Q:-you have a bad or wrong cable?
Answer:- I have checked the cable it is good.
[how did you do the checking?]
Answer2:- I tested the cable by connecting to other printer and it printed. so no problem with the cable.
In the olden days when local printers like this was the norm, we'd do test like catting a file to the port and see if the printer lights
up or responds. Something like: cat /etc/hosts > /dev/ecpp0 (or /dev/lp1, or whatever the device is). Then observe if the printer seems to
receives anything, blinks, prints the host file. You are copying the file directly to the port outside of lp or other mechanism.
Answer2:- I agree there was some conflict among the ports internally, or some process may be running at the background, that is why though it shows the request waiting in the queue it was moving to pause for some reason. when I check the error by command "lpstat -t" it sez "device busy" in /dev/lp1" file.
Solution
============
After goggling some more I found a fix for this issue at http://fixunix.com/solaris/143011-unaccepted-printer.html
1, I tried to remove the printer from printmgr, cud not remove it.
2, try kill the entries that going to /dev/lp1 port to printer "T". could not do it
3, uncheck the default printer option via printmgr.
4, Add a new printer name "test" with /dev/ecpp0" and reproduce the issue "got the same error"
5, With the forum above it sez its a "bug" and the Bug ID: 6374608. here are the details of it:-
Synopsis: No /devices entry for line printer
http://bugs.opensolaris.org/bugdatab...bug_id=6374608
Workaround is to manually install the missing driver binding
entry, using the command:
update_drv -a -i '"lp"' ecpp
This workaround should create the missing /dev/lp* devices. And after
running it, you should find the following line in "prtconf -D" output:
lp, instance #0 (driver name: ecpp)
6, I unplug the serial cable from the printer and turnoff and replug the serial cable to the printer and turn on the printer, made sure printer is ""ONLINE".
7, I restart the Solaris machine and delete the newly created "Test" printer via printmgr.
7, I just gave the lp /etc/passwd and it printed.
Finally, I thank you for your time and suggest me your opinion on this solution please.
Regards,
MKY
Edited by: user9007339 on Feb 22, 2012 12:15 AM
Edited by: user9007339 on Feb 22, 2012 12:21 AM
Maybe you are looking for
-
Please help as when I delete a file it does not appear in my trash can, however it deletes.
-
Why can i not download adobe falsh player for ipad retina
Why can i not download adobe falsh player for ipad retina
-
Renewing present contract plan
I hope this is the right place for my questions. My plan is AC SELECT FAM SHAREPLAN 700 with 3 lines. Contract ends on 02/03/11. Can I renew this very same plan with all it offers? Can I get different phones from the ones we have? Can I do al
-
Hi, I will like to ask how to download photoshop cs6 on mac 10.6.8 that has intel core duo, and does it support 64bit and is there alternatives for people who are still using intel core duo computers to use photoshop cs6 thank you@
-
Is mac keeper good for lion os mac pro
is mac keeper good for lion os I was told it wasnt and im having problems with my mac its running sluggish and freezing up nothing is running in background either!