Mass Printing Sequence with Broadcasting with SN 2004s
Hi,
We are currently running on BW 3.5 and our customer has specific requirements in terms of printing. the printed layout off course must be good, which will be improved with the latest version of broadcasting. But on top of this, they have requirements in terms of mass printing and sequence.
The central controlling department will need, each month, to print specific reports for all individual cost centers (more than one hundred), plus the nodes to which they are assigned within the hierarchy. And possibly, the print out must follow the sequence of the position of the cost centers within the hierarchy.
So, I would like to know whether the 2004S broadcasting would enable to schedule & print "in one go" these 100 reports in the specific sequence of the hierarchy.
I have read carefully the blog of Katie Beavers on this respect and raised the question but she does not seem to be able to answer.
Thx very much for your input.
Stéphane
Hi Stephane,
you can realize your requirement by using a control query.
In the definition of the control query you can use a hierachry as a presentation hierachy, and hence this hierarchy will be used to distribute the resulting queries in the Information Broadcasting of your original query.
Best regards
SAP NetWeaver 2004s BI Back Office Team
Similar Messages
-
Multi photo per page print with declared print sequence
ArchLinux discussion helped me learn that photoprint could deliver wallet sized photos by way of file manager selection and then "open in" photoprint.
when I installed photoprint I also learned that a missing print feature in gthumb resolved (hidden dependency I guess) Now for a bigger question.
What photo application allows for a declaration of printing sequence for each photo?
Every multiphoto printing tool I have seen (including the windows world) just lets you select from thumbnails and the images are default printed according to alphanumeric sorting on filename. Even other sorting filters (such as date based) . are of no use compared to a sequencing interface composed in the selection process.
Printing a small collection is all about telling a story visually and the sequence of presenting each image counts alot whatever the print size.
thanks in advance
TySelect the photo and print - select the printer, paper size and print size, click customize an in the setting select multipls of a photo on a page - the preview will reflect this selection - and click print - make any printer specific selection and click print to print
LN -
Printing problem with EPSON DOT MATRICS 1600
Dear All,
I am doing the reporting package, and need to print smartform on printer: EPSON DOC MATRICS 1600.
But the problem is:
1. if print from SAP using device type: CNEPSON, all the contents on the form which should be display on one line becomes out of two. And it can't print sequencely, it print on one page, then skip, then print again, then skip, one print one skip.
2. if print from local using device type: CNSAPWIN: if you choose print one page, an error occur; if you chosse two print from page 1 to page 2, and the contents on two pages printed on one page. It can't print continuously. Print one page, then stop.
I don't know what to do with the problems, and I think the basis should try to fix it, but the basis told me that abap need to do this. so, confusing.......
Please help me, it's in a urgent. Thank you very much.
Sandrahi,
It is a printer configuration,switch of the printer and then press and hold the "online button" and switch on the printer,then the printer will go into the printer settings mode,which will give u the current setting and the procedure to change the setting,you change the page length to your required length and print your output.
Try this it works for me.
regards,
venkatesh -
I am trying to sync my BB Bold with Entourage 2004. First I used pocketmac which was just about useless as it would either not complete the sync or make duplicate entries in both calendar and contacts. I have tried Missing Sync and while the sync always finishes it does makes duplicate entires on the device. I have totally cleaned up Entourage so there are no dups on the desktop. Can anyone suggest how I can successfully sync the Bold to Entourage ?? Thanks
The push descriptor indicates that your machine is trying to push—or, send—data to an Unfiled calendar that does not exist elsewhere. 'Elsewhere' could be in the truth database on that machine, at .Mac or on another synchronized machine.
It's clearly not on your local machine in iCal anymore. If you reset the truth database by using the Reset Sync History… option in iCal, it should no longer be present on .Mac, if you subsequently synchronized. If you opted instead to Reset Sync Data and pushed records from .Mac to your machine, it is likely that it once again resides in your copy of iCal. If you opted to Reset Sync Data and pushed records from .Mac to your machine, it will not be present in iCal.
The most reasonable explanation, given what you have described and the error dialog you printed, is that this Unfiled Calendar exists on another synchronized Macintosh. If that is the case, you must also delete it from the copy of iCal on that machine.
If you don't have another synchronized machine in your pool, I can give you a terminal command that will completely obliterate your truth database and require that you start all over again, reregistering all of your clients—including Entourage—and starting all over.
You should, by the way, disable Entourage synchronization to isolate it and temporarily simplify your synchronization pool, until you have resolved this issue. Do not simply delete the Entourage calendar from iCal, for that will result in the deletion of matching records in Entourage itself during the next synchronization event. -
Printing problems with Aperture
I just switched from Windows (long story, many years) to an Intel iMac 20, with Aperture pre-installed. I had a Canon PIXMA iP 6000D printer; all prints had a yellow cast. I bought an HP Photosmart 7160; all prints have a yellow cast. I have done a format and re-install of OS X and all software. I have installed my Aperture software on another iMac 20 at the store; with my printer and the store's printer the prints had a yellow cast. I took my computer to the store and printed on their printer; all prints had a yellow cast. I get the same results printing from Photoshop CS2 for Mac or from Preview. I have tried several USB cables. My monitor is calibrated with a SpyderPro 2. Prints directly from a memory chip in the printer are fine. I've tried all the adustments in the print setup; no help. I'm working on the sliders now, but with seven sliders with 100 possible settings on each I think that's seven to the 100th power possible settings. Both printers work fine with my Windows computers.
I've exhausted all the available Apple support. Anyone have any ideas?
Arthur
iMac 20 Mac OS X (10.4.8)
iMac 20 Mac OS X (10.4.8)Well, to reiterate, I am using the HP printer as there is only room for one printer on my desktop. I am using HP paper, the "Advanced" type which is bar coded so that the printer recognizes the paper type and sets the appropriate defaults. I have also tried other HP papers, and selected them from the printer dialog. I have tried setting the paper type manually with the "Advanced" paper. I have tried printing with all the defaults left alone.
When I said that I had tried every print option in the printer dialog sequence, I meant that in the printer dialog I had tried each of the paper types, each of the color options, each option under HP Colorsmart, several types of HP printer paper with the proper option selected. Under ColorSync, there are only two options here. One is "Standard" and the other is "in Printer" which is greyed out.
Go down the print dialog. I have tried every option. Under "Paper Type, Quality" I have tried every option for paper type, quality, and color. I have done this systematically, using all available combinations.
I don't know how else to describe the process Apple and I have tried to use to try to repair my problem. Name an option--I have printed using it.
I tried the "sliders" as a possible way of altering the output from the computer to the printer, as I had exhausted all other possibilities, and if I could find the magic combination I could set it as the default and all my prints would be
affected by those settings and print correctly. They appear in the printer dialog from Aperture. My photos print correctly if I copy the file to a Compact Flash chip and place it into the printer slot and print directly.
Pardon me if I seemed snappish. I bought the iMac specifically for photographic work, have had it for a couple of months, have made several hundred prints, have exhausted support from Apple, and am grasping at straws. I have 8 GB of photos from my last trip which remain unprinted. Shortly before the trip I did two wedding shoots which were quite successful, printed from Photoshop CS2 under Windows. All my current photos print acceptably on this printer from my Windows computer. They are not acceptable printed from Adobe CS2 for Mac.
Can I be more specific in what I have tried? Do you have a suggestion for something for me to try? Apple and I are grasping at straws, and would appreciate any help you can give.
Arthur -
How can i create a .mov file from image sequence with different durations
how do u create an image sequence with different durations? image one stays for 10 seconds and image two may stay for 30 and so on. each one has a custom duration. can this be done with an apple script or a text file saved as an mov file?
Hello Omar,
The example code Programmatic Printing of TestStand Reports - Modular contains a sequence that will convert an XML file to an HTML file given the XML file's path and the path to the stylesheet. It may need to be altered to fit with the modifications you have already made to the report generation routines, but I think it should definitely get you off on the right foot. Let me know if you have any questions!
NickB
National Intruments -
Will a wireless printer work with airport extreme?
Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.
Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.
-
Printing problems with hp laserjet cp1515n [found problem]
Dear Arch users,
A couple of weeks ago I installed for the first time an Arch linux on my brand new Dell laptop with an UEFI MB. It took a while until I could understand how UEFI works but eventually I sort it out and got Arch installed. Unfortunatelly there are some small problems to be straiten out. One of them is the fact that printing with my laser printer (see subject line) is not working.
for the last couple of days I was searching through all post I could find around on the internet, mainly here at the Arch forum. Unfortunatelly I could not find anything nearly describing what I am living on my system. Well here is a brief description of what is happening. After installing Arch, I opted for KDE desktop environment and I made the full instalation. After installing additional software (gimp, inkskape, etc.) I needed to install my printer. At first I couldn't get permission. Than reading the Arch tutorial for CUPS, I saw that the 'lp' permission was not setup properly. Well Have done as described there. Then I tryed to install using the GUI from KDE for installing an usb printer and for my surprise there was not such an option. I intalled than de hp-toolbox, and than it was easy to install the printer. It was automatically recognized and everything was there. The problem was, when I open an archive (text, web page, doesn't matter) and send it to print, the spooler went well theoretically sent to printer and then popped up a notification saying printing finished. Opening the printing cue, I can see that the archive was still there and marked as pending. That was the point where I started to search around for potential solutions or similar solutions.
After sudying a lot I came to a conclusions that it probably have something to do with permissions. Unfortunately I could not find out where or which permissions to change in order to get something printed. I found some "debugging" and information commands and I am posting the results here;
# systemctl status cups
cups.service - CUPS Printing Service
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled)
Active: active (running) since Tue 2013-01-29 13:26:21 BRST; 4h 43min ago
Main PID: 525 (cupsd)
CGroup: name=systemd:/system/cups.service
└─525 /usr/sbin/cupsd -f
Jan 29 17:39:46 XXXX-archs hp[12186]: io/hpmud/musb.c 588: invalid usb_open: Permission denied
Jan 29 17:40:14 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:43:27 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:19 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:26 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:44:51 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:45:05 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:35 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
Jan 29 17:56:36 XXXX-archs systemd[1]: Started CUPS Printing Service.
# systemctl status cups.socket
cups.socket - CUPS Printing Service Sockets
Loaded: loaded (/usr/lib/systemd/system/cups.socket; enabled)
Active: active (running) since Tue 2013-01-29 13:26:10 BRST; 4h 45min ago# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
Jan 29 13:26:10 XXXX-archs systemd[1]: Starting CUPS Printing Service Sockets.
Jan 29 13:26:10 XXXX-archs systemd[1]: Listening on CUPS Printing Service Sockets.
# lsusb
Bus 001 Device 003: ID 03f0:4417 Hewlett-Packard EWS UPD
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 003 Device 004: ID 0c45:648d Microdia
Bus 004 Device 004: ID 0cf3:e004 Atheros Communications, Inc.
# /usr/lib/cups/backend/usb
DEBUG: list_devices
DEBUG: libusb_get_device_list=10
DEBUG2: Printer found with device ID: MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8; Device URI: usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y
direct usb://HP/Color%20LaserJet%20CP1515n?serial=00BRAS85501Y "HP Color LaserJet CP1515n" "HP Color LaserJet CP1515n" "MFG:Hewlett-Packard;CMD:PJL,PML,PCLXL,POSTSCRIPT,PCL;MDL:HP Color LaserJet CP1515n;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CP1515n;MEM:MEM=55MB;COMMENT:RES=600x8;" ""
# lpinfo -v
network ipps
network smb
direct hp
network socket
network http
network ipp
file cups-pdf:/
network lpd
network beh
network https
direct ptal
direct hpfax
# usb-devices
T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=03f0 ProdID=4417 Rev=01.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Color LaserJet CP1515n
S: SerialNumber=00BRAS85501Y
C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none)
The out put from the last command (usb-devices) I only copyed the relevant part from the printer in question.
the couple of last lines of CUPS error.log are;
E [29/Jan/2013:17:44:48 -0200] [Job 14] Stopping unresponsive job.
E [29/Jan/2013:17:52:25 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:17:52:41 -0200] [Client 14] Request for subdirectory "/admin/log/error_log?".
E [29/Jan/2013:18:05:47 -0200] [cups-deviced] PID 14408 (dnssd) stopped with status 1!
E [29/Jan/2013:18:16:37 -0200] [cups-deviced] PID 15151 (dnssd) stopped with status 1!
I hope somebody could help me out to find where to change permission (if necessary) or point me out to an different road.
Thanks
Last edited by camarao (2013-02-08 02:36:36)OK here am I again.
as mentioned before I created an bogus printer with:
lpadmin -p test -v file:/dev/null
verified the presence of the printer;
lpstat -p
$ lpstat -p
printer Color_LaserJet_cp1515n disabled since Fri 01 Feb 2013 02:55:59 PM BRST -
reason unknown
printer hp930c is idle. enabled since Thu 31 Jan 2013 11:30:21 PM BRST
printer test is idle. enabled since Fri 01 Feb 2013 02:54:57 PM BRST
At first "test" printer was disabled for an uknown reason.
tried to use lpadmin -p test to enable the printer as described on the previusly mentioned web site, but couldn't get to enable printer "test". After reading alittle more on the internet I found the command cupsenable <printer> and indeed it changed the printer status.
tried to print;
echo test | lp -d test
result:
$ echo test | lp -d test
lp: Destination "test" is not accepting jobs.
I tried to change the condition of the Color laser printer but did not made any difference with the cups command.
Conclusion: how can I modify this status to make the printer accept jobs? -
I have been printing on my Z.3100 with CS4 Photoshop for over a year with no problem. Also was working fine with CS5 Photoshop for about a month in 64-bit mode. Now, when I select Papers/Quality the selection area is blank. This printer works perfectly fine with other applications such as Illustrator and InDesign. I switched to 32-bit mode and uninstalled and reinstalled the driver several times. I downloaded the driver again from HP and uninstalled and reinstalled and it didn't help. I then took the plunge and deactivated PS and uninstalled and reinstalled it (in 32-bit mode) and that didn't make any difference. Also, many times when I switch back and forth between Papers/Quality and other selections Photoshop crashes. Can you help. Thanks
Thank you, C-Wave. That is what I have done. I have reinstalled each printer driver, PS and Raster, and each is assigned to its own printer (installed with HP Printer Setup Assistant). That hasn't helped. I can'tthink of anything I have added or changed that could possibly have affected the system so I am baffled.
I am using Snow 10.6.4, 2x2.8 ghz quad-core Intel Xeon with 6 gb. Have three internal and three external drives. -
Printing problem with Photoshop CS 6 extended and HP printer
Hi all, long time browser, first time poster.
This is a weird issue, it should be noted from the first that I only have weird computer issues. I work at a technical High School where we have the whole Adobe CS6 Extended suite installed. We are running it under a fully patched version of Windows 7 and all the CS6 updates have been applied on 25 machines that all have the same issue. The problem is that when the students go to print to our HP Color Laser jet CP6015DN, the job can been seen loading into the queue, it races up to about 45MB, then sort of strolls to load the rest of the document, usually about 59 to 75 MB's in size. Then I watch the message go to processing, the front panel of the printer says processing, then the print job disappears from the printer queue and the printer and there is no print out. I printed out the usage job log and it shows none of the failed attempts to print and I check the event log page which does not show the errors either.
Looks like a bad printer driver, right? So I download the new HP Universal printer driver, I normally do not do the Universal driver route as so many of my older printers have problems with it, but the CP6015DN seems to have trouble accessing the extended tray 5 with the specific drivers, but I have the same printing issue with the new Universal driver and the PS driver. So I wander through the HP manual and it suggests using profiles to print to the printer and move the color handling from Printer Manages Colors to Photoshop manages colors and I track down the ICC profiles for the printer on the HP site as the link in the book is dead, so try the CP6015srgb_d50.icc, CP6015_cmyk_d50.icc and CP6015.icc, I try all of these profiles with the newest PS printer driver and the same error, goes to the printer and into the bit bucket. Still no printout or error message.
Strange thing is that if I do a test print, it prints fine, if I open a tif file in Photoshop, it prints fine, now the teacher says if they print to the Xeorx 7760 in the next room, it also prints out fine. It should be noted that we had so many issues with configuring the Xerox and adjusting controls it was the reason we purchased a HP proofing printer in the first place. But the next door lab is all Apple, which doesn't seem to have this issue. So I open the test document and save it as a PDF file instead the native Photoshop format, and it prints fine, which from what I've been reading on the internet may be the preferred way of printing proofs, I don't know, I've never really used Photoshop, but the teacher says this isn't an acceptable fix and the students should be expected to manage a number of revisions saved to PDF format, me I just go up a number at the end of the file name for every correction when editing documents.
Any suggestions you have would be appreciated.
Windows 7 X64
Photoshop version 13.0.1 x64
HP Color Laserjet CP6015 DN model number Q3932A
Dell Optiplex 980 i5-650, 3.2Ghz, 8 GB RAM.Yes, Photoshop is up to date at Version 13.0.6. I have even gone so far as to uninstall CS 6 and put CS 5 back on and still the same thing. This is really frustrating, the people at Canon try to be helpful but wind up saying it's an Adobe problem and of course you can't talk to real people anymore about CS 6. My research on the Internet has turned up nothing so I'm stuck.
-
How to do two sided printing automatically with HP 7520 printer
All that I am trying to do is to make my printer do two sided or double sided printing. No matter what I check IT DOES NOT WORK. I checked "2-sided, 1 to 2, NOTHING. What amazes me is that this worked until recently and now it just will not do double sided printing. I am probably doing something wrong, but WHAT?
This question was solved.
View Solution.filgrastin
Generally speaking, duplex printing is accessed / adjusted from Printing Preferences.
If you are printing from within an application, for example, within Word or within your Browser, you might reach Printing Preferences from Print Preview.
Reference:
Manage Print Output with Print Preview
Excerpted:
Print Preview – Accessing the Printing Preferences
Browser Page > File > Print Preview > Properties
Properties Accesses Printing Preferences:
Paper Source (Tray Selection), Paper Size, Media, Orientation, Print on Both Sides, Page Order
Reference: Printing Preferences
================================================
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
Printing problem with HP LaserJet Printer since Mavericks Installed
Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
FrançoisLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion. -
Printing issue with DeskJet 6940
About every 20 pages or so, printing in portrait mode, the printer does a form feed after printing about 1 1/2" of text. It happens intermittently, and there is no apparent logic or pattern.
I have reinstalled the driver, changed the USB cord, but to no avail. My LaserJet CP3505 on the same computer does not exhibit this issue.
Using Windows XP with SP 3, Dell Dimension 3150 with 3.25 GB ram. It also happened with earlier XP versions, so its not an operating system upgrade problem.
It happens with B/W or color printing, always using 8 1/2 x 11 paper from the upper tray. It does not appear to happen when printing in two-sided mode.
I don't know what to try next! Does anyone have an idea?I have an older HP non-wi-fi printer connected to my Apple Airport Express wireless router which includes a USB port. This makes the printer available with my wireless network which I've used for printing wirelessly with my former Apple PowerBook and now with my MacBook Pro for years. I'm now able to print from my iPhone and iPad as well.
You need to have the printer connected to a wireless router for your wi-fi network, or purchase a printer that is wi-fi capable and if you do that you might as well purchase an AirPrint compatible printer which doesn't require a wi-fi printing app purchased from the app store. -
Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?
HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Hello there,
I am having few issues with BI 2004s system. Its a new implementation.
- When you create Data source using DB connect in new system, it creates with old version. I could see the SMALL square box next to the Data source. I would expect the system to generate new 2004s datasource.
- Obviously the generated D/S wont allow us to create New Transformations. We have to create old transfer rules/update rule. I do see the option to migrate the D/S when I right click on it. But I get short dump when I try that and then you have to discard the D/S and create new one.
- Also, it wont allow you to delete the DBConnect D/S although you have option to do that?
Anyone has faced these issues?
Performance issue with reporting:
I understand that you have to have portal in order to execute reports which we dont have at this client. They dont have time and money to invest right now. So we have created reports using BW 3.5 BEx Q.designer/WAD to run the reports on web. The report takes long time when you try to drill down on Material/Customer with only 150,000 records in Cube. The cube has just three dimensions (two char each) and 4 key figures. Any suggestion to improve?
Thanks
SudhakarYes, I noticed it too and was thinking the same thing, blueaura.
I'm sure they want to ensure the scan is reliable. I keep my screen at a lower brightness to save power, and sometimes Starbucks scanners take a bit longer for it to register.
2) is already fixed.
3) is a feature, not a bug. If you are updating an app you already have installed, it doesn't bother to ask you for the password. Nice!
For Google maps, just use maps.google.com in the browser.
Maybe you are looking for
-
Hi, I am an entertainer that want rename a track a music a number of different ways so it will come up in playlist that work alphabeticly. for instance: Good Song I want to change to: A Good Song B Good Song C Good Song D Good Song So I can place the
-
Success with iDefrag and DiskWarrior on my Intel iMac! (indirectly)
Had some very good success using iDefrag and DiskWarrior on my intel iMac, both of which do not run directly on the intel platform yet. As I had observed a gradual (modest) slow-down over the course of the past month since I got my iMac, I couldn't h
-
Hi Seniors/ Experts I am currently working as a resource in SAP ISU in a Production Support project for a Utility company in UK in Device Management Module for Capgemini. Let me start from the beggining. I Got tagged into SAP ISU Project, trained on
-
The problem is clear: i don't print on paper ...instead, i just save documents as PDFs and send them over email. But it takes waaay too many clicks to get to that sub-menu-button-item on a regular basis. So just like with any other modal dialog i wou
-
Errors when trying to activate web service
Has anybody encountered an HTTP 500 error while trying to activate a webservice based on a business object from one of the SAP namespaces? The error that I am getting is: HTTP 500 (InternalServerError) - Dump or unhandled exception in backend.