Mass reconnection option?
is there an option anywhere within iTunes (or even an applescript) that will allow for mass reconnection of files in an itunes library. I made the major mistake of moving my music files from one drive to another manually, and now am faced with the dreaded 'cannot locate file would you like to locate it' scattered all throughout my massive library (16,000+ songs, 120+GB).. is there any way for me reconnect these without having to:
a) do it individually
b) delete everything and re-add everything to the library again (also curious if I went with this option would I lose the artwork i have downloaded/added as well?)
unfortunately reverting back to the way things were isnt an option since i've reformatted the drive that originally contained the music.
any help would be appreciated. dumb move by me, i should've thought a bit more, as an aperture user i know never to move my files manually, but rather let aperture do it, so not sure why i completely forgot that rule of thumb when it came to itunes...
Along with KP's suggestion,
When using "Mass Allocate" to do the spreading, the Planning user (even if they are already the application owner) needs to be provisioned with the "Mass Allocation" role in Shared Services.
Cheers.!!!
Rahul S.
Similar Messages
-
I am trying to transfer photos from my Blackberry. I do not have a data plan or a micro sd card, so the usb mass storage option is (I believe) the only way for me to get my photos off my phone and onto my computer.
I plug the usb cord into my computer and phone, but my computer does not recognize the phone as a storage device, so when I click on "Removable Disk (E)" in My Computer, I get prompted to insert a disk into the drive.
I read that in order for this to work, I need to enable mass storage on my Blackberry. I go to options, device, and storage; however, there is no "Mass Storage" option even listed there. The only two options with check boxes are "Enable Compression" and "Media Card Support."
Is the mass storage option elsewhere on the Blackberry Curve? I have tried restarting my phone, computer, using different usb ports, and using different usb cords to no avail. How can I get my photos off my phone?
Solved!
Go to Solution.Hi BerryHalps
Welcome to BlackBerry Support Community Forums
Please refer to this KB Article :
KB13564 : How to enable or disable mass storage mode on the BlackBerry smartphone
But as you told that you don't have any Media card on your phone then mass storage mode will not work .You can refer to this KB Article and transfer your Images or Photos from your BlackBerry to a Computer :
KB29523 : How to manually transfer files between a BlackBerry smartphone and a Windows computer
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
Nokia 701 mass storage option hang
hi..
Whenever i connect my nokia 701 with my computer and choose mass storage option it hang very badly...
How can i solve this probalam....??
Moderator's notes: Moved to it's own threadDear Kr_gabani,
Welcome to the Nokia forums!
Could you please try perform a soft reset using the code *#7780# security code 12345 if prompted, this will not delete any data however it will restore your settings to how they where when brand new.
Please try and replug the device and if it still does not work please go into your computers control panel > devices > uninstall the phone drivers.
After you have uninstalled the phone drivers please replug your phone and let the drivers reinstall themselves.
Hopefully this solves your issues with entering mass storage mode. If the issue persists, please dont hesitate to let me know!
Sheldrick
Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you! -
FBL1N - Fields in "Mass Change" option
Good afternoon experts,
Is there any posibility to change the fields that appear in the "Mass Change" option in transacctions FBL1N, FBL3N .....?
Thank you a lot.
Kind regards,
DanielHello,
Please, READ the SAP Note 640908. It describes how you can change other fields in these transactions.
REgards,
REnan -
I have an opportunity where I'd like to mass delete my risks and rules and reload them. During an SP update, our Basis team appended to our rules with the SAP "out-of-the-box" rules. I'd like to get to the point of deleting everything (rules and risks) and start over. Does anyone have an option available to do this so that I can reload everything from scratch? We only have CC/RAR and FF/SPM in use right now, so no other module will be affected.
Thanks,
GregIf you want to remove ALL CC data, you'll have to remove all data from all CC tables in SQL. If you only want to remove select amounts of data, you might want to open an SAP ticket to get the most updated script for your release and flavor of SQL, but here's a sample script:
DELETE FROM SAPSECDB.VIRSA_CC_ACTRULE
DELETE FROM SAPSECDB.VIRSA_CC_ALLASTRUN
DELETE FROM SAPSECDB.VIRSA_CC_ALLISTDTL
DELETE FROM SAPSECDB.VIRSA_CC_ALTCDLOG
DELETE FROM SAPSECDB.VIRSA_CC_AUTHMAP
DELETE FROM SAPSECDB.VIRSA_CC_CRACT
DELETE FROM SAPSECDB.VIRSA_CC_CRACTT
DELETE FROM SAPSECDB.VIRSA_CC_CRPRM
DELETE FROM SAPSECDB.VIRSA_CC_CRPROF
DELETE FROM SAPSECDB.VIRSA_CC_CRPROFT
DELETE FROM SAPSECDB.VIRSA_CC_CRROLE
DELETE FROM SAPSECDB.VIRSA_CC_CRROLET
DELETE FROM SAPSECDB.VIRSA_CC_DATAEXD
DELETE FROM SAPSECDB.VIRSA_CC_FLDMAP
DELETE FROM SAPSECDB.VIRSA_CC_FUNCACT
DELETE FROM SAPSECDB.VIRSA_CC_FUNCPRM
DELETE FROM SAPSECDB.VIRSA_CC_FUNCSYS
DELETE FROM SAPSECDB.VIRSA_CC_LASTRUN
DELETE FROM SAPSECDB.VIRSA_CC_LSYSGRP
DELETE FROM SAPSECDB.VIRSA_CC_ORGUSERS
DELETE FROM SAPSECDB.VIRSA_CC_PRMRULE
DELETE FROM SAPSECDB.VIRSA_CC_SUPP_DET
DELETE FROM SAPSECDB.VIRSA_CC_SUPP_HDR
DELETE FROM SAPSECDB.VIRSA_CC_SUPP_TEXT
DELETE FROM SAPSECDB.VIRSA_CC_SYSCRACT
DELETE FROM SAPSECDB.VIRSA_CC_SYSHMAP
DELETE FROM SAPSECDB.VIRSA_CC_SYSRULE
DELETE FROM SAPSECDB.VIRSA_CC_SYSSAPOBJ
DELETE FROM SAPSECDB.VIRSA_CC_SYSUSR
DELETE FROM SAPSECDB.VIRSA_CC_TEXTKEY
DELETE FROM SAPSECDB.VIRSA_CC_USRMAP
DELETE FROM SAPSECDB.VIRSA_CC_XSRULEMAP
DELETE FROM SAPSECDB.VIRSA_CC_XSYSGRP
DELETE FROM SAPSECDB.VIRSA_CC_SYSTEM
DELETE FROM SAPSECDB.VIRSA_CC_SYSTEMC
DELETE FROM SAPSECDB.VIRSA_CC_SYSTEMT -
Changing "Mass change" options in FBL1N
Hi All,
With reference t.code FBL1N, followinng by menu Environment/Mass change/New values,
I wonder if is possible add other fields in the pop-up "New values" to get some mass changes.
Thanks
GandalfWhat are you interested in changing?
Rob -
Mass reconnect required - help
Hi,
I had been using photoshop elements 9. I was having difficulty with system crashes while trying to reconnect 12 thousand photos that had been moved from multiple folders to a single one (skydrive/pictures on my computer) so upgraded because I was told PSE 12 could better handle large numbers of photos.
Somehow the catalog in PSE 12 is looking at the old location of the images and now needs to reconnect all 12K photos. However, it's not even looking at the new location.
I directed PSE 12 to 'watch' the new folder. Nothing. I then tried to import from the folder but the system froze after 3K photos.
Any suggestions?
Thanks.Have a look at this blog from Surendra and see if that can help you.
http://psekb.blogspot.in/2013/03/how-do-i-reconnect-missing-files-in.html
The watched folders have nothing to do with already imported pictures, it's to import the new ones.
For the problem with importing photos, did you get a message or not ?
Could you try creating a new catalog and importing only half of the pictures in the folder ?
If that still freezes, try the other half. That test would perhaps tell if there is one or several problem files creating the problem. -
'mass storage' connection option showing error mes...
Up until a yesterday , my phone was working fine . Then , yesterday , when I tried to connect it to my PC via the nokia-provided USB cable , things went kaput.
The phone began by working normally, asking me to select a connectivity option, while my computer gave me the message that it had detected a new MTP device , and then asked me to insert the disc that might have come with this device. I cancelled this , as always, and selected the 'mass storage' option on my phone. At this point , the phone gave me this error message :-
"Memory card in use by another application. Please wait."
and the computer , instead of treating the phone like an external storage device , began going through the same sequence of " found MTP device . Please insert disc " over and over . This is happening even after I reset my phone to factory settings. What do I do now ?
Can anyone please help ?Are you sure you selected Mass Storage mode on your phone in the connection prompt, and not Nokia Suite / Ovi Suite / PC Suite? If you have restored your phone to factory settings and are stil having problems, then you will need to take your phone to your local Nokia Care point for them to inspect.
to locate Nokia Care: http://nokia.com/support -
Front Panel Mass Binding Project Variables Issue
Hello -
When attempting to bind controls to shared variables through the front panel mass binding option, there is an issue where you can not seem to bind a "project item" to the control. The method of binding I am using is to export a text list of control names, urls, mode, and function to a text editor utilizing the front panel binding mass configuration options. The text editor shows, in the fourth column, a "0" for no function, a "1" for network item, and a "2" for project item. when attempting to import the list back into the front panel binding mass configuration, all "2" indications become "1", as all items are treated as network. Thus one can not effectively bind to a project shared variable item.
The binding works fine manually by means of utilizing the properties selection of the control, but it is difficult to do this for 821 controls, as in my application.
My application is based on a OPC served group of 821 variables which are linked to controls and indicators through the shared variable representation for each item created in the multiple variable editor.
Does anyone have a work around for this issue, as it is a showstopper right now, ie, you can not effectively bind a large quantity of controls or indicators to project located shared variables as required.
The rationale behind utilizing project located variables instead of network located variables is to reduce the amount of calls to the OPC server which was causnig a large latency in the refresh of the 821 items. With the items defined as shared variables within the project, a single call is issued, which has tremendously sped up the refresh cycle for the list of variables.
Thank you in advance for your insight in this matter,
John DeCroosHello Brian A.,
In response to you comment --
"in 2006, and John did not follow up with any more information for Efosa"
-- a great deal of information was provided to NI (Efosa and many, many others, up to the product manager for the DCS module). I have never heard back on a fix for this bug for the identified version of LabVIEW. The reply by Efosa here was well after we had shipped our product -- (please see date + Efosa's apology) -- we had found our own solution as is identified in the original post.
My solution was, as is also indicated in my original post, to manually bind each variable. This was unbelievably time consuming, but was all I had.
The version of software I am now working on uses far less variables, manually bound to avoid the multiple binding issue we had in the past.
I have checked the mass binding function in LV 8.5.1, it works fine now. I guess it would have been nice to have had a reply that the bug had been resolved ---- would have helped me out a bit.
Thank you,
John DeCroos -
Sales Order Material and its MOQ mass change
*The issue is related to our Spare parts Ordering process in our company.*
We have a concept of having 65 days of back orders. Hence there will be
lot many open orders in the system.
The Material code will be changed from (for eg) M01 to M02. Hence forth the Material (M01) ordered will
automatically changed to M02 through Material determination logic. But
for the 65 days back orders, it is very difficult to change the
material one by one in sales order. There may be more than 100 orders
for a material. Even if the MASS change option in Transaction VA05
doesn't address because of the following reasons;
1. The changed new material (M02) may have new price with new validity
periods, whereas the back orders will have old pricing dates. Its
difficult to change individually in the open orders.
2. Some materials may have partially delivered.
Similar to ECM changes, there will be MOQ changes which also needs to
be changed individually the order quantity in the old Open orders.
For example,
Initially the MOQ for a material in 10. Order inflow has happened based
on this MOQ.
Now if the MOQ is changed to 20, future orders are addressed. But for
the 65 day back orders, we need to manually open the individual sales
order and change the order quantity.
Hence we require a mass change option for the open orders as below:
1. For Material Changes (M01 to M02), I will give the list of orders and
the line items and Qty for M01. The program should reject the existing
line item for M01. An additional line item should be created with M02.
Also the pricing date should be changed.
2. For MOQ changes, I will give the list of orders and the line items
and Qty. The program should reject the existing line item for those
materials. An additional line item should be created with new Qty.
If the material is partially delivered, the the existing qty should be
updated to the extent it is delivered and the remaining qty should be
updated with new material or New MOQ.You can use BAPI_SALESORDER_CHANGE.
1. Get the SO detail using BAPISDORDER_GETDETAILEDLIST.
2. MODIFY the ORDER_CFGS_* internal tables and update.
CALL FUNCTION 'BAPISDORDER_GETDETAILEDLIST'
TABLES
order_cfgs_value = gt_char
order_cfgs_ref = gt_char_ref
order_cfgs_inst = gt_char_ins.
MODIFY gt_cfgs_*.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
TABLES
order_cfgs_value = gt_char
order_cfgs_ref = gt_char_ref
order_cfgs_inst = gt_char_ins.
Refer SAP note 549563. -
Mass reversal of documents posted using F.13
Hi Friends,
We have some GR/IR open items as on 28.02.2010, and we ran the F.13 program to clear those line items with clearing date 03.03.2010. Since all those documents cleared on 03.03.2010. In total there were 1000+ documents posted by the program.
But unfortunately user has not entered the posting date range in F.13 selection screen as 01.03.2010 to 03.03.2010. Because of this, documents related to FEB period also cleared in march and if we run the FBL3N with open item key date 28.02.2010, all items are showing open items. which is correct from the system perspective.
But we need clear, those documents posted prior to 01.03.2010, with clearing date 28.02.2010 only.
In FB08, mass reversal option, we can reverse multiple documents, only in case of open items, but not the cleared items.
My requirement is that, is there any program / way to reverse the cleared items, posted by using F.13.
We cannot use FBRA, since we have 1000+ docs.
Please advise.
Thanks,
SrinuHi Joshi,
Thanks for your prompt reply.
I have acheived my target, using LSMW batch input recording method with tcode FBRA to reset the cleared items.
After that, i went to F.80 and given the doc number series and did the mass reversal.
Again i did F.13, given end posting date as 28.02.2010, and clearing date 28.02.2010 and executed.
This resolved my issue.
Thanks,
Srinu -
Mass change of PAYMENT TERMS on Vendor Invoices
Hi Can someone advise me how i can update paymetn terms on vendor line items en masse ?
When i select the line items i require, then CTRLShiftF9 - the field for payment terms does not seem to be available for me to add new values in .....
Is there another way for this to be done, - or is there a way that i can add in this field
Thanks for your advice
TonyHi Tony,
You can use the transaction FBL1N.
Select the entries you want to change and do a Mass change.
The field PAYMENT TERMS is not available (I think whith an oss note that it is possible to ad this field to the mass change option) but you can fill in the fields Days/discount in Mass change.
Paul -
Mass Change for Indirect Role Assignment
Hi all,
I am in the process of changing the companys authorisations from a standard SU01 role assignment to a position based indirect role assignment.
At the moment I am using PFCG going to the Org Mg button under the User tab then attaching the position that way. Is there a way of assigning more than one role to a position at the same time?
Is there a Mass Assignment option in PFCG or is there a separate transaction available to make this process quicker??
Thanks for your help
Ianyou can mass-assign people and roles if you go to transaction PPOME instead of PFCG. to make role assignments from PPOME please apply note 578271 first. be careful whilst implementing this <insert nasty word here> note because some of those view-clusters tend to refuse to load your changes = you can see them, but they don't work - might be you will have to flush table buffers for the changes to take effect.
-
Mass change of certain fields thru list of equipments IE
Hi,
Instead of writing LSMW, i am looking for mass change option for list of equipments available thru IE05 under Go To----> Carry out a mass change.
Its giving me a error message :
Objekt PM_MASS_TECH_OBJECTS is not maintained
Message no. BL010
Diagnosis
An application log entry is to be made for object PM_MASS_TECH_OBJECTS. This object is, however, not maintained as an application log object.
Objects and subobjects of the application log are created using transaction SLG0.
System Response
The program had to be cancelled.
Procedure
Inform the system administrator.
I went thru the forum link: Mass Change of Functional Locations - error message "Objekt PM_MASS..... and read the note 1166820.
Please tel me the steps to do in order to include Object : PM_MASS_TECH_OBJECTS
Object Text: Mass Change of Equipments and Functional locations
in table as per the note...
Please provide some detailed steps..
Authorization is no issue as i have profile: SAP_ALL
Thanks
Murad..Hi All,
i'm trying to change a filed value as null. i.e. a value is maintained in pp work centre field for functional location. i want to delete this value to keep this field as blank. By using this mass change functionality i'm not able to do so. can any body hep me out to this problem.
Raj -
Issues With Reconnecting Library to Referenced Files
I'm hoping somebody may be able to shed some light on very strange behavior I'm currently experiencing with Aperture. Before I continue let me say ahead of time that I've already run a Repair Permissions, Repair Database and a complete Rebuild Database on the Library. That said here is what's happening.
My workflow consists of Importing all images via Aperture, as referenced files, on to a small, external hard drive. When I return to my studio I manually copy the folder of images, from the small external drive, over to my desktop hard drive. The next step is to Import the Field Library to my desktop MAIN library. Once the Field Library is Imported into the MAIN Desktop library I then highlight all the images and select File>Locate Referenced Files. Though I've done this hundreds of times in the past, it's currently not working on some files. Here's where the very strange behavior comes in.
When the Locae Referenced Files window comes up I see the image in the top pane that I want to reconnect. In the bottom pain I navigate to the drive the image now lives on, I find it and it too appears in the bottom window. So far all seems to be fine, except when I tried reconnecting, Aperture went through the process but didn't actually reconnect. I retried several times but after the first try to reconnect the Reconnect & Reconnect All buttons is grayed out.
Ok, so what the heck is going on? I start reviewing the Metadata of each image while still in the Locate Referenced Files window. The file numbers are exactly the same but the time stamp on each image is different. Why I have no idea. I plug in the original mini field drive with all the images that Aperture Imported to check the Metadata on the field drive. Sure enough it's identical to the Metadata on the Desktop drive which means it's different from the Aperture Library on the orignal drive Apertue saved it to as well. But what's even more interesting is that the minute the mini hard drive is plugged in, Aperture sees it and reconnects the images automatically, even though the potential issue of the metadata timestamp being different is the same on both the mini field drive and my desktop drive.
In summary, when Aperture wouldn't connect the images that were on the desktop drive I thought I found the reason; a discrepancy in Metadata. But when the original drive was plugged in, the same files had the same discrepancies yet Aperture found them fine.
None of this would be a probelm if Aperture had the ability to FORCE RECONNECT. The images are exactly the same except for some minor metadata descrepencies that I have no idea how they got changed and I really don't care about. But............. how the heck am I going to get these fiels reconnected without a Force REconnect option. Any ideas out there?William is right - use the provided tools.
. Never once could it not find the images once I took it and showed the exact path to where the images were newly located. So what happens if that drive ever fails completely and I have to replace it with a totally new backup?
There must be something wrong with your external drive, if reconnect is not working. I had never, ever trouble to reconnect the originals after copying or cloning a drive, when I restored a mac from my backup.
Check the filesystem on your field drive, if the file system is MacOS Extended (Journaled).
Maybe you are looking for
-
I have icloud on my pc with windows vista. recently, upon startup I get a message that says applephotostream.exe has stopped working. Windows will close this program . . . I tried re-installing the icloud control panel, etc. to no avail. any lea
-
Calling procedure with 2 parameters from a dynamic link
I have just another question- I have a procedure testing_del_archive which is being called with 2 parameters...from a dynamic link in my SQL Query. The following is my code.... SELECT re.report_exec_id, re.exec_userid, NVL(re.batch_exec_date, re.begi
-
My ipod touch 2nd gen wont update past 4.2.1! What should I do?
-
Infosource invisible in Productive system (APO BW)
Hello I've created a new setup where i'm uploading from a flat file to an infocube. It works fine in the T and Q system. However after transport to the P system i can only see the infocube in RSA1, i cannot see the infosource so i can't create an inf
-
Firefox seems to crash alot for me and when it does a window pops up telling me the problem is with my Plugin Container for firefox. I have uninstalled Firefox many times and than installed the new version. Well today my McAfee popped up and told me