Mass removal of location products from Active Model 000

Hello Experts,
Can somebody suggest me how to remove location products from active model in mass. I've to remove say 2500 location products from Active Model 000.
Thanks.
Best Regards,
Chandan Dubey

Hi,
Folllow the below after you have created and saved the work area.
Go to supply chin engineer.Enter the work area and model ans click on change. Now go to location product tab.
Now select the location products you want to remove from model.
now right click oover it.
Now you will get an option of "delete from model" and putting the cursor over ir  you will get the " location products" as options.
Click on the same and confirm.
Hope this will help.
regards,
kaushik

Similar Messages

  • BAPI to remove location-products from Active Model

    Hi All,
    Can you tell me the BAPI to remove location-products from active model in MASS? Thanks.
    Best Regards,
    chandan

    Hi Chandan,
                       You can use the BAPI for deletion of product-location combination from planning version.
    BAPI_PRDSRVAPS_DELMULTI
    Regards,
    Saurabh

  • Trying to install Creative Cloud Desktop on windows 8.1, I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1

    I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.

    Error Code 1: "Failed to install" | Creative Cloud Desktop :
    https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • How can I remove the Location column from the search results in a .chm file?

    How can I remove the Location column from the search results in a .chm file?
    I generated the file in Robohelp HTML 9.
    As far as I know it's used when you've combined more than one source into the final help file. It is possible (though I don't remember doing it) that I did that once a couple of years ago but now I'm only using one source - the project that's generating the .chm.
    Can anyone tell me how I can remove it?
    Thanks
    Tom

    In Project Setup look at the Window properties. I think you will find Advanced Search is ticked.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Remove domain controller 2008 from active directory

    Hi,
    I have 2 DC 2008R2 & i have 2 ts one of them don't get the GPO i do everything i found that my 2 dc don't replicate good i can see the different on sysvol folder.
    After that i explain my self, My question if i remove the dc (its not the fsmo dc its the second), and after removing i add this dc ?
    I need to check some checks before ?
    After removing i need to delete from the dns record
    ?After Adding the same dc to the domain i need to check something ?
    Thanks
    Zahi

    Hi,   
    >i want to remove my dc and replace him with new dc.
    You can add a new DC to a domain, and then remove the DC that you want to remove.
    To add a DC to a domain, after add server to a domain, we can run dcpromo to install AD.
    After server 2012, Adprep.exe commands run automatically as needed as part of the AD DS installation process.
    For more detailed information about Adprep.exe, you can refer to the following link:
    Running Adprep.exe
    http://technet.microsoft.com/en-us/library/dd464018(v=WS.10).aspx
    For detailed steps about how to Removing a Domain Controller from a Domain, you can refer to the following link:
    Removing a Domain Controller from a Domain
    http://technet.microsoft.com/en-us/library/cc771844(v=WS.10).aspx
    Best Regards,
    Erin

  • Remove leading zeros coming from Active Directory

    Greetings all.  Our sapusername is stored in Active Directory with leading zeros.  Is there a way to remove these zeros in the portal so SSO will work?  I have had my AD team manually remove the zeros in front of my sapusername, so I'm sure that's the issue.
    Alternately, is there a setting in R3 that would allow leading zeros?

    Hi,
    I've seen the problem before and I think you only have two choices (haven't looked into if R3 can accept leading zeros)
    1. Since you are allready retrieving sapusernames from an R3 change that mapping to remove leading zeros and possibly put it in a new attribute.
    2. Create a JAAS login module which retrieves found username from the HeaderVariableLoginModule and trims leading zeros before putting the username back to shared state. This new LoginModule must be placed before the CreateTicketLoginModule.
    Note it is not very trivial to create a JAAS login module but an excellent guide can be found here http://help.sap.com/saphelp_nw2004s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm

  • Removing Exchange 2007 from SBS 2008 (In an Exchange 2010 Coexistance Scenario) - In order to remove 2007 Mailbox Objects from Active Directory and remove the SBS2008 server completely

    I'm trying to remove Exchange 2007 from an SBS 2008 server
    (Server 2008 Standard FE).  My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
    We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
    I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers.  We have two full blown DC's in the environment.
    I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server.  I can NOT seem to find a TechNet article that shows me how
    to proceed in this kind of scenario.  I am trying to use the TechNet article:
    http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
    This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard. 
    When I go to Disable Mailboxes I get the following error:
    Microsoft Exchange Error
    Action 'Disable' could not be performed on object 'Username (edited)'.
    Username (edited)
    Failed
    Error:
    Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
    OK
    I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010.  I just want
    to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
    Can someone point me in the right direction?
    Thanks!

    Hi,
    Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
    2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
    On current situation, please refer to following articles and check if can help you.
    Transition
    from Small Business Server to Standard Windows Server
    Removing SBS 2008 –
    Step 1: Exchange 2007
    Removing SBS 2008 – Step 2:
    ADCS
    Removing
    SBS 2008 – Step 3: remove from domain / DCPROMO
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    Hope this helps.
    Best regards,
    Justin Gu

  • Delete products from model

    Hi,
    Do anyone know how to make a mass deletion of products from a model?
    Thanks in advance,
    Marcelo

    Try program /SAPAPO/DELETE_PRODUCTS.
    Rob

  • Create Forecast from one location porduct to other location product

    Hi All,
    I have a business scenario trying to design process in APO -DP.Two Plants in R/3 (1001 and 1002).
    Plant-1001, produce  material A using raw material B.
    Plant -1002,  Produce C  and sale to plant 1001. Physically material B and C are same but in R/3  material  B and C  are different numbers.
    I am trying to design this scenario in APO- DP  like whenever Plant 1001 run forecast for material A, it should generate forecast for material B(raw mat in 1001) and material C (finish product in 1002).
    I tired to understand if APO-DP BOM functionality can be used but in this case system asked me maintain material C in plant 1001, which i am trying to avoid.
    This seems to be common business scenarion. I'll appreciate any quick advice or help to understand how to map it in APO-DP.
    OR
    Is there anyway to transfer forecast from one location product to another different loaction product.
    Thanks
    Kumar

    Hi Kumar,
    1) Your scenario seems like realignment of location products.
    2) You can achieve this using realignment planning in APO DP
    3) The transaction to do this is /SAPAPO/RLGCOPY
    4) Here, the history of one location product will get copied or maintained to transfer
    to another location product
    5) You can select one or more key figure data to get copied to your new
    location products from the existing history.
    Regards
    R. Senthil Mareeswaran.

  • Simulation version getting updated from active version

    Hi all,
    We noticed that in Active Model 000, existing Simulation Versions are getting updated (changed) daily, even though we do not know any job scheduled by us which could do such update. I tried to search for any job running at the time of version change, but could not find through SM37.
    Can you guess what could be triggering this change?
    Regards,

    Hi,
    You can see the difference in master data between planning versions. Select 2 planning versions with the Ctrl key, select Additional Functions then Master Data Comparison. Run wide open and check the log. Compare 001 and SM1 then 000 and SM2. Just a thought.
    I don't think transactional data differences would affect the "Last Changed" field.
    Best Regards,
    Mike

  • I have an account in Adobe, but every time I work out on any product from Adobe products The program tells me I Trail You remove and re-install the program, but problem persists

    I have an account in Adobe, but every time I work out on any product from Adobe products
    The program tells me I Trail You remove and re-install the program, but problem persists

    Hi mahmod alsousi,
    Try this:
    Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
    Now move the following folders to desktop:
    1) SLCache
    Windows: OS Drive\Program Files (x86)\Common Files\Adobe
    Mac: Library/Application Support/Adobe
    2) SLStore
    Windows: OS drive\ProgramData\Adobe
    Mac: Library/Application Support/Adobe
    3) OOBE
    Windows: OS Drive\Users\<username>\AppData\Local\Adobe
    Mac: /User/Library/Application Support/Adobe
    Now launch Premiere Pro and sign in with your Adobe ID.
    NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
    Thanks,
    Rameez

  • How can I remove the 'Qty' text from individual product descriptions?

    I didn't know if this was possible or not... I've recently taken the reins of handling an ecommerce site that had been published before I got on board. My boss wants me to remove the 'Qty:' description from some products because the image shown for some products is a misleading description of the actual quantity available (i.e. there is a picture that shows a stack of conveyors parts, and it says 'Qty: 1' to represent one 'stack' of conveyor parts - this confuses customers into thinking there's only one individual conveyor part available however). To avoid any confusion he requested that I remove the 'Qty' text from similar images. I see that you can change the 'In Stock' amount of a particular product underneath the 'Inventory' tab of the 'Products' menu, but I didn't know if it was possible just to remove the quantity description altogether without just typing the quantity in at zero. This is likely a strange question but I didn't know where else to ask! I would appreciate any help or advice Thank you

    Hi ewhelhalu,
    I just figured out a way to do it, but it's a little weird and complex, and I have no idea what the consequences for editing this .plist string might be. I'm thinking it'll be OK, but you never know what might happen when you screw around with Apple's intentions.
    So if you have the Developer Tools on your install of OS X, you can use the Property List Editor to edit the Dock files. (If you don't have this program, you can use a program like [Pacifist|http://www.charlessoft.com> to selectively install stuff from your Leopard disk).
    The file you're interested in is within Macintosh HD > Users > Your Username > Library > Preferences, and it's called com.apple.dock.plist. Open that up with Property List Editor, and open the arrow drop-down next to "Root." The lines you're looking for are "persistent-apps" (the left side of your Dock) and "persistent-others" (the right side). If you open the drop-down arrows, you'll see there are numbers below each. The numbers correspond to your Dock items, from left to right.
    If you click on drop-arrows by the numbers, a sample hierarchy looks like this: 0 > tile-data > file-label. It's the "file-label" string that you want to edit. Just make it ("it" being the name of the icon under the "value" column) blank, save the file, go into Terminal and type "killall Dock" without the quotes, and your Dock icon should appear without a name. You'll have to do this for all of them.
    I should insert the usual caveats here about backing up beforehand and making sure that you have a copy of the .plist file before you start tweaking it so that you can replace it if things go wrong. And perhaps someone with more knowledge of Terminal or third-party apps than I have will come along and suggest a simpler solution. But that's the only one I have.
    Hope that helps!
    —Hazy

  • How to remove a product from my Apple Support Profile

    I want to sell a used computer. It is necessary to remove it from my Apple Support Profile at supportprofile.apple.com before doing that.
    I can see the machine in the list of products. I can click the link "remove" but the wheel turns forever and the next page is not displayed. The removal process is stuck. This is also so in different browsers (I tested Safari, Firefox).
    How can I delete a product from the list in my Support Profile???

    Howdy Barry
    Here's my test from an old product I no longer have
    ⬇ Click/Tap to enlarge ⬇
    You just click the Product (as highlighted in grey)
    Click the [Remove Product] button centerstage - the appears VERY briefly beside the button
    one responds to the challenge "Are you sure..." by clicking [Remove Product] once more
    Success page
    notification email ( notice there is NO "Undo" )
    back to MySupportProfile after clicking the only button on the Success Page
    If you think [ EDIT Products ] button may be a workaround, I'll let you illustrate
    ÇÇÇ
    <Edited By Host>

  • DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

    DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

    Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

  • DM 3.0.0.665: How to remove arc from relational model

    When creating an arc in the logical model, "engineering to relational" will update the relational model so "DDL Preview" shows DDL for two triggers that enforce the arc.
    After removing the arc from the logical model and "engineer to relational" I still see the trigger code in "DDL Preview", as if the arc is still there.
    Where can I see the arc in the relational model, and how do I remove it from the model?
    / Marc de Oliveira
    Edited by: marc66 on 2011-03-01 06:49

    Marc,
    you can see the arc on diagram - probably it's hidden. You can move some of parent tables and probably it'll appear. If still invisible then you can create subview and put child table and two parent tables on it - arc should appear and you can delete it.
    Philip

Maybe you are looking for