MASS REVERSAL OF ACTIVITY ALLOCATION

Hi,
Could you please give Transaction code for mass reversal of activity allocation.
With regards,
V.k

Hi Krishnam,
Either plan or actual activity price calculation KSPI or KSII, you choose extrast -> reset from the top menu after you fill in all data like period, year, cost center group etc. Please note that you can not simulate reversal that means no test indicator when you want to reset the price calculation.
Regards
Sharabh Ivaturi

Similar Messages

Mass reversal of documents posted using F.13

Hi Friends,
We have some GR/IR open items as on 28.02.2010, and we ran the F.13 program to clear those line items with clearing date 03.03.2010. Since all those documents cleared on 03.03.2010. In total there were 1000+ documents posted by the program.
But unfortunately user has not entered the posting date range in F.13 selection screen as 01.03.2010 to 03.03.2010. Because of this, documents related to FEB period also cleared in march and if we run the FBL3N with open item key date 28.02.2010, all items are showing open items. which is correct from the system perspective.
But we need clear, those documents posted prior to 01.03.2010, with clearing date 28.02.2010 only.
In FB08, mass reversal option, we can reverse multiple documents, only in case of open items, but not the cleared items.
My requirement is that, is there any program / way to reverse the cleared items, posted by using F.13.
We cannot use FBRA, since we have 1000+ docs.
Please advise.
Thanks,
Srinu

Hi Joshi,
Thanks for your prompt reply.
I have acheived my target, using LSMW batch input recording method with tcode FBRA to reset the cleared items.
After that, i went to F.80 and given the doc number series and did the mass reversal.
Again i did F.13, given end posting date as 28.02.2010, and clearing date 28.02.2010 and executed.
This resolved my issue.
Thanks,
Srinu

Internal Activity Allocation in Training And Event Management

Hi,
I am facing a problem while internal activity allocation of attendees in Training and Event Management. When i try to run "Internal Activity allocation for Attendees" i get an error message as " Reference document 1005 could not be found".
I have done all the configuration but even then i am unable to understand the reason for this error.
Plz help
Regards
TS

Hi,
I have resolved the above error. it was due to master data maintainence.
But now while posting i am getting an error that " Activity type XYZ can not be allocated to 2008"
Can someone help with this?
Regards
TS

Training and event management - Internal Activity Allocation for Attendees(PV18)

Dear all,
I run the PV18 transaction (Internal Activity Allocation for Attendees). Lets imagine that I successfully allocated 1000 EUR in the CO module. Then I realize that it was a mistake, and I want to correct this by sending -1000 EUR to CO.
My question is: how can I do that? Is PV18 capable of doing this? Or this has to be corrected manually in CO module?
Thanks
Nándor

>>I tried to create it and the system generated a message about using the allowed name space.
if it is a warning message, I think, you can go ahead & create the HRTEM entry in TTYP table.. you can check if this will let you get past the Activity Allocation.
~Suresh

Modify posting period in KB65 - Internal Activity Allocation reposting

Hi Gurus,
I have lots of documents originally created in CATS.
The user who did the CAT7 transfer made a mistake and put in posting date (01.03.2010) on the selection screen of CAT7. All items have been posted on 01.03.2010 instead of the original date of the records in CATS.
When I try to repost these items in KB65 and modify the posting date to February, 2010 the system issues an error message (BK214) that the new posting period is earlier than original and it is not possible to modify.
Message BK214 can't be switched off either.
Is there any chance to bypass this? Or any other idea how to modify the posting date of these items from March to February?
Thanks,
Jeno

Try KB21n......we used to change the activity allocation through this transaction.....should work in your case
Thanks
Assign points if useful

Mass reversal of material documents

Hi All,
We have MBST for reversing/cancelling trhe material documents. But how can we reverse/cancel the material documents on a mass basis?
In transaction MASS, there is no object created for mass reversal of material documents.
How can we create an object for mass reversal of material documents?
Is there any other Tcode or program for mass reversal of material documents?
Thanks and regards,
Ramachandra DN

Dear Ramachandra,
We Create
<b>LSMW</b> for <b>T.Code MBST</b>
I hope it is better way to use Mass reversal of Material Documents
Otherwise depend upon the size of the data we can move to other uploading programmees.
For better clarification you can approch ur ABAPers to resolve the issue.
With regards,
B.Ravindranath

Mass Reversal of Cleared Vendor Transactions

Hi Fi gurus,
I uploaded some Vendor transaction using LSMW but discovered some anomaly.Unfortunately some of this transactions have been cleared.
1)Now i want to do mass reversal of all this documents.
2)For the cleared documents i learnt i cannot reverse until i reset or something ,How do i reset so that i can reverse this documents.
3)I read in one of the forums of the process of using BDC program to do mass reversal.Please can anyone give a clue to this also if possible give a sample BDC program as to go about this.
4)All other information will be highly appreciated.
I'll please appreciated a detailed approach to solving this if anyone has a clue.

Hi,
You have to use Transaction FBRA to reset it. Unfortunately there is no transaction code in SAP where you can reset in MASS.
You can try with a LSMW recording of FBRA to reset and reverse by giving a range of documents in the Excel Sheet.
Regards,
SAPFICO

Que-''actual activity allocation is not allowed for order .''

hi ,
During confirmation of operation at co11n (also at co11), got one error massage i.e "actual activity allocation is not allowed for order "
Due to this error confirmation is not possible .
pls help me to solve this problem.
AMOL WAGH
Edited by: amol wagh on Dec 6, 2008 8:09 PM
Edited by: amol wagh on Dec 6, 2008 8:10 PM

Dear,
For allocation activity costs, we need to define activity type in KL01 by specifying the unit of measurement of the particular activity type (like machine - Hours etc.). While creating activity type, we will assign a secondary cost element (with category 43) in the activity type through which the activity cost will flow.
After that we will plan for cost center in KP06 (cost elementwise). Then we will plan machine hours in KP26 where we will link the activity type to a particular cost center.
Please give the feed back.
Regards,
R.Brahmankar

Actual activity allocation is not allowed for order .

hi ,
During confirmation of operation at co11n (also at co11), got one error massage i.e "actual activity allocation is not allowed for order "
Due to this error confirmation is not possible .
pls help me to solve this problem.
AMOL WAGH

Dear,
What is message number? Did you assign the usersttus in BS02?
For allocation activity costs, we need to define activity type in KL01 by specifying the unit of measurement of the particular activity type (like machine - Hours etc.). While creating activity type, we will assign a secondary cost element (with category 43) in the activity type through which the activity cost will flow.
After that we will plan for cost center in KP06 (cost elementwise). Then we will plan machine hours in KP26 where we will link the activity type to a particular cost center.
When we do price calculation in KSPI, system checks the planned costs for cost center (in KP06) and also checks the machine hours planned (in KP26) and gives the cost for the particular activity type.
Please check the above in the system
Regards,
R.Brahmankar

Plan Indirect Activity allocation

Hi everybody,
during the execution of Plan Indirect Activity allocation, after filling the cycle I detected the following error message:
"You are not authorized to run cycles on CC : Z910
Message no. 00368
Diagnosis
Error message of the batch input with variable text. A more precise explanation is not possible."
Any suggestion on this, please?
Thanks in advance,
Barbara

Hi Ramakrishna,
I've thought this but the strange thing is that the error message appears only for some cycles and not for all. As a matter of fact one of the cycles that I've created has been successfully executed without any problems.
Any idea about this strange system behaviour?
In the meanwhile I'll check in relation to the authorization profile.
Thanks in advance.
Barbara

Variable Costs using SKF in Indirect Activity Allocation

Hello
I am trying to use indirect activity allocations and KSPI to transfer costs from an activity in an indirect cost center to multiple direct cost centers. The Receiver tracing factor is planned SKF (i.e. number of employees). The issue I have is that when doing this allocation, the variable cost at the indirect cost center gets transferred as a fixed cost to the direct cost centers. We need to have this as a variable cost on the direct cost centers. Can anyone suggest anything or let me know if I'm doing something wrong?
Here are my sender/receivers:
Sender:
Quantities Calculated Inversely
Plan Values
Receiver tracing factor:
variable Portions
Planned SKF
No Scaling
Thank you

Hi Mark
I was able to achieve this in the past...as below
1. On the indirect Cost center - Use an activity type Catg 2 (indirect entry indirect allocation)
2. On the receiver cost centers - Use an act type Catg 4 (Instead of SKF)
3. Enter the Plan Act Qty for this Act Type on the receiver direct cost centers in KP26 and Actual Qty in KB51N
4. In cycle definition - Var Portion Type would be based on Plan Act Qty instead of SKF
5. Execute KSCB - Folllowed by KSPI.....
You can also try the above using SKF on receiver cost centers - But Act Type Catg 2 on the Sender Indirect cost center.... I guess, this is what you have done... In my opinion, this should also work...
I believe, to transfer the costs as variable - You need to plan them in KP06 as variable (i.e. Activity Dependant Planning)....
So, Plan your expenses on the indirect cost center in KP06 with reference to the Act Type Category 2
br, Ajay M

Mass Reversal of MIRO entries

Hi Experts,
is there a standard SAP Transaction code to reverse the multiple documents posted through MIR7.
Please advise.
Regards
Shailesh

Hi,
Sir.
As far as concern there is no Tcode or BAPI avaliable for MASS Reversal of MIRO. Instead simply you
can write LSMW for MR8M with appropriate data in .TXT format and run once.
LSMW for MR8M is possible solution.
I hope this helps you.
Regards,
Pankaj A Bhalerao.

T. Code for Mass reversal of IV documents

hi,
We use the T. Code MR8M for IV document reversal. what is the T. Code for Mass reversal of IV documents.
Tx

Hi ,
MR8M is the only T code for reversal of IV documents.
You can use LSMW of MR8M for temporary requirement , in case if your frequency of requirement is high then use a BDC programme for the same .
Hope this helps .
Regards ,
Dewang T.

Mass Reversal of Billing Documents

How can I do a mass reversal on Billing documents.

Hi,
Either you can do with VF11 and run the report in the background and the second option is run the program in background job to generate the billing documents.
Regards,
Seegal

Mass Reversal of reversed documents

Hi Friends,
I want to know the transaction code for mass reversal of the reversed docuemnts in SAP.
We can reverse the reversed document throug FBR2. But this is applicable only to reverse the individial documents. I want to reverse the several reversed docs in one shot.
Awaiting your response.
Thanks,
Krishna
Search before posting such contents. This is the behaviour we encourge here.
Edited by: Marilyn Pratt on Jan 27, 2009 12:16 PM

try f.80

MASS REVERSAL OF ACTIVITY ALLOCATION

Similar Messages

Maybe you are looking for