Mass Settlement of Trip without affecting the financial postings -- Travel

Hi SAP Gurus ,
This is Sudhir , I need to know whether any function module is available for mass settlement of trips (i.e changing the setellement status in table level as 2 without affecting the financial enteries).
Generally the settlement of trips is generally done thorugh PR05 t code. Since I my company they are planning to migrate data from legacy to ecc6.0 , they have decided to settle all the trips before migrating.
I suggested BDC operation , But my functional team told that It will affect the financial enteries.
So friends , I am really held , Could you kindly sugget me how to proceed further.
With Regards ,
Sudhir S

Hi SAP Gurus,
Could you kindly suggest How to proceed further regarding this .
With Regards ,
Sudhir S

Similar Messages

HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

My iPhone, iPad and iPod are all associated with the same Apple ID. How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

Very simple. Turn off Find my iDevice, then Tap Settings, General, Erase, Erase all content and settings.

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Computer iMac7,1 has been giving sundry problems for some time. Within the last six weeks I have reinstalled the OS (Snow Leopard), without affecting the overall contents of the hard drive. ±3 weeks later the problems became more serious and I again reins

Computer iMac7,1 has been giving sundry problems for sometime. Within the last six weeks I have reinstalled the OS (Snow Leopard),without affecting the overall contents of the hard drive.
±3 weeks later the problems became more serious and I againreinstalled the OS and installed OS 6.6.7 from the internet.
I used the option to restore from the external backup driveand went back some time as it was my intention to reinstall individualcomponent in an attempt to find out where the problem might lie. This hasintroduced an entirely new problem! If I open Time Machine from the desktop itappears that all backups from late 2009 to June 2011 are intact. But, in thiscase there are none of the restore functions &c on screen. The latter areonly shown if Time Machine is opened from the menu bar or from the dock but, inthis case, available are only backups in late 2009!
I also opened the Apple Hardware Test in an attempt toestablish the nature of the problem. The ‘quick’ version said there’s nothingwrong; the more detailed one reported “Error detected, 4HD/11/40000004.” I haveagain tried to employ this test but nothing I do can induce it to open!!!
What to do? I need help urgently and would appreciate anyadvice that offers solutions to the problem.

To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

How to remove a photo from a LRPublishedCollection without affecting the Publish Service?

Hello guys!
I would like to know if there is a way to remove a photo from a LRPublishedCollection without affecting the Publish Service. Basically I would like it to be removed from the collection but I don't want to be added to "Deleted Photos to Remove".
Thanks a lot!
Jordy.

I don't know how to keep it from being put on the "Deleted Photos to Remove" list at least briefly, but if you do this, it'll amount to the same thing:
* save status for all photos in collection
* set status of all photos to "do not publish"
* remove photo from collection.
* publish the collection, and make sure you call the deleted callback, but don't do anything else.
* restore previous photo statuses.
Only works in Lr4+.
Rob

How to format my computer without affecting the software installed?

how do I format my computer without affecting the software installed?

You can, but if you don't format the drive using the Zero Data option all your personal files will still be accessible to someone who knows how to gain access to them. If that's not a concern then here are two options (easy and not so easy):
The Easy Way
1. First, boot from your Tiger DVD, select your language and click on the Continue button, then select Disk Utility from the Utilities menu, select your boot hard drive, go to the First Aid tab, and click the button for Repair Disk. Repeat this until no trouble is found. Then click on the Repair Permissions button. Then quit DU, return to the installer and shutdown the computer for a couple of minutes.
This will assure that the drive is OK and permissions are OK.
2. Next, boot to single user mode by restarting and after the chime press and hold down the COMMAND-S keys until a black screen with white type appears.
3. At the prompt, type the following commands pressing return after each command line:
/sbin/fsck -yf
mount -uw /
rm /private/var/db/.AppleSetupDone
shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when you reboot, it will send you to the startup wizard where you can start a new user without reinstalling.
The Not So Easy Way
Follow these instructions step by step to prepare a Mac for sale:
First, back up the data:
1) Shut down all Virtual PCs. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
2) Clone to an external drive using Carbon Copy Cloner.
Next, prepare the machine for the new buyer:
3) Deauthorize the computer in iTunes! Deauthorize both iTunes and Audible accounts.
4) Remove Open Firmware passwords
5) Turn the brightness full up and volume nearly so.
Install a fresh OS:
6) Insert the OS X install CD/DVD.
7) Restart the computer while holding down the C key to boot from the CD/DVD.
8) Run Disk Utility from the file menu and erase the internal hard drive (optionally zero all data).
9) Install OS X.
10) Reboot the computer.
11) From the welcome screen, you can skip the registration step by typing command-Q.
12) When prompted, create an account (it will be an admin account).
13) From your new admin account, configure networking.
14) Then use Software Update to bring your system and all of it's applications up to date.
15) From Disk Utility, repair permissions on the new volume.
Now delete the account you just created:
16) Boot from a different volume (e.g. a firewire drive, if available)
17) Clean up the image using the following terminal commands:
prompt> rm /Volumes/<imagevol>/var/db/BootCache.playlist
prompt> rm /Volumes/<imagevol>/var/db/volinfo.database
prompt> rm -r /Volumes/<imagevol>/var/vm/swap*
18) Now you can get rid of the admin account you used to set up the machine Use the terminal:
prompt> nicl -raw /Volumes/<imagevol>/var/db/netinfo/local.nidb -delete /users/<admin>
prompt> rm -r /Volumes/<imagevol>/Users/<admin>
prompt> rm /Volumes/<imagevol>/var/db/.AppleSetupDone
19) Shut down and ship it to your buyer. When they get it, it will boot to the Welcome screen just like a factory Mac, except that it's better because it's completely up to date.

Creation of credit notes without affecting the stock on FI side.

Hello,
We would like to know about the procedure to follow to create credit notes without affecting the stock.
For instance a credit note has to be made because the invoice pricing was not correct (discount not taken into account,etc...). We want to issue a credit note for the customer in value (not in quantity) refering to this invoice.
How to process? Is it supposed to be through a FI transaction?
Thanks and Regards,
Rajesh Kumar Mantri

Dear,
Use transction FB70 and select Credit Memo in transaction and pass the entry and mention the invoice numner in field Inv. Ref. under payment tab..
Regards,
Chintan Joshi

Sorting the year without affecting the tracks

How do I sort the year from most recent to oldest without affecting the order of the tracks?

The most recent albums at the top of the list is "last is listed on top", and apparently Apple has not set up a sub filter to list albums "last on top" while listing tracks "first on top".
If you list Albums "first on top" then the tracks will also be "first on top".
Yeah it's kinky.
At the top of iTunes, click iTunes/Provide iTunes Feedback. Tell Apple what you think.
Tracy

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

I am using a Mac OS X 10.7 and i have trouble using idvd. If I buy a previous version of ilife, will I be able to use idvd without affecting the settings of Mac OS X 10.7? Can both versions of ilife run on the same mac?

You don't need to buy an earlier version of iDVD to have it run with Lion. iDVD 7 has been with us since iLife 08. Tell us in detail what you're experiencing.
OT

Upgraded to LR5.7 and PS Elements 13. Using a SSD which is becoming Full! Can I remove older versions of these programs without affecting the functionality of the new programs?

Upgraded to LR5.7 and PS Elements 13. Using a Solid State Drive which is becoming Full! Can I remove older versions of these programs without affecting the functionality of the new programs?

Yes, there is no need to keep previous versions of software on the SSD (or on your computer).
Also, you didn't mention this but if the photos are on the SSD, you should move them off the SSD to a regular hard disk using these instructions: Adobe Lightroom - Find moved or missing files and folders

With CS4 installed already, can I uninstall InDesignCS3 without affecting the CS4 suite?

With CS4 installed already, can I uninstall InDesignCS3 without affecting the CS4 suite?
InDesignCS3 was downloaded from the internet. CS4 suite was installed from CDs. Both are currently on my computer. How can I uninstall InDesignCS3?

Just use the add/remove programs feature in the control panel, but I would strongly suggest that you don't do this. If you ever need to supply a CS3 file you'll be sorry you uninstalled it.
Bob

First timer. Just installed Time Capsule. The first backup looks like it will take two days at the pressent speed. Can I close MacBook Pro and have first back up continue, and can I unplug and plug in at work without affecting the backup?

I'm a first timer on this (or any) help site. I just installed Time Capsule. The first backup looks like it will take two days at the present speed. Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?

Hi Oneinspirit,
Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
Start a backup: Click the Time Machine icon in the menu bar, then choose Back Up Now.
Pause a backup: Click the Time Machine icon in the menu bar, then choose Stop Backing Up.
OS X Yosemite: Start, pause, and resume a Time Machine backup
http://support.apple.com/kb/PH18851
All my best,
Allen

How to replace a layer which has a mask applied without affecting the mask?

I have a layer with a photo. I have animated a mask on this layer, but now the client wants the photo replaced with another one. When I add a new photo to a new layer and copy the mask properties from the good working layer, the mask winds up in a different place than the original. I've tried doing a replace footage with the source photo trying to make it the new photo but same results, the mask always gets repositioned.
How can I replace an image on a layer that has an animated mask on it with another one without affecting the mask?
Thanks,
Steve

Thanks everyone. Now that I understand more about Track Mattes it works fine. I can scale and position new layers under the animated mask. This helps tremendously

Hello everyone. I currently have an iphone which is part of a 3 people family plan therefore we use the same apple id. So my question is can I use my own apple id without affecting the fact we have a family plan?

Hello everyone. I currently have an iphone which is part of a 3 people family plan; therefore we were told we need to use the same apple id. So my question is can I use my own apple id without affecting the fact we have a family plan? I would like to make my own app store purchases with my own credit card and not my sisters fiance since we are using his apple id. PLEASE HELP ME SOMEONE!

qnzsh0rty20 wrote:
therefore we were told we need to use the same apple id.
Whoever told you that has no idea what they're talking about. Ignore that advise.

Resizing parent movieclip without affecting the children

Hi all,
What's the best way of resizing parent movieclip without affecting the children?
I have a container movieclip that resizes depending on the stage, and when I add another movieclips to it they also resize, but I want them to keep the original size,
is it possible?
Many thanks

Hi, thanks for the reply,
I already tried this way, I put a bitmap as a background of the movieclip and made only it dependent on the stage size,
something like that:
mc.bg.width = stage.stageWidth; (and not mc.width, as its width will change along with the bg width)
so when I add children to the mc, they don't change any more.
I'm a .NET developer and new to Flash platform, and I think it would be nice from the community to make a built in property for MovieClip class -
resizeChildren: Boolean
I lost a whole day on this problem, because when I drew a movieclip in a designer side I saw that its background size changed along with the size change, and when I added children to it from the code the movieclip's size changed and the background stayed still, quite strange behavior for an HTML guy
I think that it would be better to consider already drawn movieclip not to have any children yet and have its background as its part (not at(0)) and let the programmer choose later added children's resize behavior.
thanks again

Mass Settlement of Trip without affecting the financial postings -- Travel

Similar Messages

Maybe you are looking for