Mass Storage/ Com port

I have an iphone 4s and i have troubles in syncing it with itunes. When i plug- in the usb cable all i see in my iphone is USB config and it asked me to choose mass storage or com port. I tried using mass storage to transfer apps from itunes in my iphone but when i open it, it doesn't work. When i tried com port it has some intallation problems so i can't use it. I don't know what seems to be the problem i tried using some of the troubleshooting techniques but none seems to work i still cannot sync my iphone to itunes. I dunno what to do i really wanted to transfer my apps in my iphone.

one and a half year has passed since TS' message but the problem still appears to be relevant. the thing is as simple as it only can be - this iPhone is fake. look at its screen, touch its buttons, check its edging. they are far from Apple perfect design. Devil is hiding in the detail. be careful!

Similar Messages

USB Ports - Mass Storage Devices - Unknown Device

Model: Satellite A135-S2276
OS: Vista
I recently tried plugging in my media card reader that I've had for several years now and has worked many dozens of times. Windows responded with an 'Unknown Device' response. I thought this was odd, so I changed and tried each USB port. To no avail the device wasn't recognized. I tried it in another computer and it worked fine.
I began to try two other mass storage devices that I know used to work, up until recently, on the laptop. Both now are 'Unknown Devices'. I now have a strong feeling that someting was wrong with windows vista. So I search around and find methods to force the driver (inf) cache to reset which should reload any corrupted drivers. Tried many methods, nothing worked, same results. I saw that Vista Service Pack 2 just came out, I installed that hoping that it would fix. Nope.
I gave up on it being a software issue after I did a fresh reinstall of the OS and with the base OS with no other software installed same results.
Is there a way to diagnose if the USB is malfunctioning from a hardware standpoint? Is it possible the USB, even thought windows recognizes it, is dead on the motherobard? If so, how do I get this fixed? Motherboard replacement?
Help!!

It sounds like it is working enough that it can recognize that soemthign is plugged into it.
You say you did a fresh install of Windows. Did you use the recovery disk or a retail Windows copy. If oyu didn't use the recovery disk then maybe you are missing a driver. Best woudl be to use the recovery disk. If a USB mouse doesn't work after that then the hardware has an issue. Assuming the BIOS is OK.
This signature left intentionally blank.

I have a new mac air 11inches, i tried to download my pictures using my usb mass storage device. how come my mac can't recognize and open my files? pls help...

i have a new mac air 11 inches and i tried to download my pictures using my usb mass storage device. how come my mac is not reading it? pls hel...

What exactly is your 'mass USB device', and how is it formatted? When you connect it to your MBA, does it show up on the desktop?

Mass storage issues (does not play in car on home stereo) after upgrading to V4.5

I am having issues with Mass Storage after upgrading my 8130 to V4.5. I can no longe hook the device to my home stereo or car stereo to play music. My computer does read the device. It is not my media card. I still have my old blackberry: the card shows up on both phones and computers. It is not my cables as they work with my old phone. I have also done all the obvious things like pull the battery and play with the media card setting
This guy had the same issue though i never saw resolution:
Any idea is appreciated! After upgrading the device software to version 4.5 earlier this week (BlackBerry 8800 with v4.5.0.69 (platform 2.7.0.72)) as proposed by T-Mobile and RIM Germany something has changed with the behaviour when connecting via USB as a mass storage device:
Using a micro-SD card with 2 GB for some months now as a storage for MP3-Files which can be played with my Blue&Me system in my car. This is some kind of Microsoft Windows mobile platform (Automotive) providing playback of MP3-files etc connected via USB. This was never a problem with the previous software. It behaved as it should. Here is an example of what it previously did (taken from http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...):
"On your Blackberry device, you may or may not first see a message about insufficient current. It just means you can't charge your Blackberry with that PC USB port. Hit the escape key once (on your Blackberry device). You will be prompted a question : do you want to activate USB Mass Storage Mode. You can answer YES or NO. Answer YES."
The message about insufficient current is important here because the Blue&Me system does not provide the current as proposed by USB-standards. Anyway after clicking this message/warning away the Blue&Me would recognize the mass storage and start playback.
After upgrading to v4.5 there is no warning about current any more and the mass storage can't be recognized. I've checked both components: The B&M works fine with any other USB-devices connected, and the BB works fine with Windows after connecting via USB (presumably because there is enough current!). All standard settings in Options/Media card for enabling mass storage have been tested but without success.
Hopefully someone whose genius far exceeds mine will help me with this. Thank You.

I have exactly the same issue with my car stereo equiped with USB and my 8130 device. OS 4.3 works fine (and displays the "insuficcient current" message) and after upgrading to 4.5 mass storage mode not works anymore. And of course it works with regular desktop/notebook computers. I've made many experiments with different storage cards (now I use SDHC 8G from SanDisk). The card works fine if I attach it through card reader in my car, it even see multiple drives which cardreader creates.
Even more I wrote the small blackberry application in java (i'am professional programmer) and ordered BB keys for $20 to deploy it to device. The program uses the RIM api call Device.requestStorageMode() which in my opinion should turn on storage mode of device. But the result was the same - car audio don't see the mass storage with OS 4.5.
Interesting fact that in OS 4.3 the message about "insufficient current" appears BUT the device CHARGES via this USB without a problem. The same case with OS 4.5 - charging device is possible.
Also, I can't switch to OS 4.3 because it have the serious problem with bluethooth connections - it suddenly lost my handsfree link and its very bad if I get incomming call during driving and my handsfree not work.
Forgot to mention - now I have the OS 4.5.0.127
Michael.
Message Edited by djm132 on 04-09-2009 01:01 PM

Mass Storage Driver Severe Crash - USB Mass Storage device useless

I am running the latest, updated version of OSX Leopard; Hardware Growler; and Parallels Desktop. Today, as I was doing a very resource-intensive task on Windows XP - via parallels - I plugged in my Samsung M610 to try to access the memory card. I then closed Windows XP, and noticed that my cpu was still registering at 100% output. Opening Activity Monitor and looking at the processes there, I saw that Mass Storage was taking 100.00 units of CPU output, and was not responding, I immediately clicked end process. Much to my dismay however, Activity Monitor then proceeded to lock up, so I forced it to quit, which caused finder to lock up in turn. Throughout this time, my cpu was still working overtime, so I decided to power the computer off. Upon rebooting and much "whew"-ing I tried to plug my Cell Phone in again; as usual Hardware Growler notified me of the connection and it's details, however, confusingly finder had no knowledge of any mass storage connection. After multiple connects and reconnects, testing all USB ports on my MBP (and being annoyed by the system telling me to properly find and eject hardware before removing it, which I suppose I should take as a good sign) my memory card remained invisible to finder. Hardware growler continues to perfectly recognize the device connection.
The most odd thing about this particular problem, is that other USB devices are recognized... at least one other Mass storage device is, but I have only one other device to test at the moment.... Any help would be greatly appreciated.

Check the following link and find the part of the text "Common resolutions for Code 10 error".
http://support.microsoft.com/kb/943104/en-us

USB Thumbdrive causes "Mass Storage Device Not Responding"...

Everytime I connect a thumbdrive to my MBP, I cannot eject it. I always get the "disk in use" message.
When I go into Activity Monitor, I see "Mass Storage Device Not Responding" and it's eating up a lot of system resources.
After a short period of time, the fan will come on full blast, and stay on until I force the program to quit.
The only way I can eject the thumbdrive is to force quit through Activity Monitor.
I've tried multiple thumbdrives on every USB port and I get the same result.
I've searched through the Support site, but haven't found a solution.

Hi @Eman_Gamal
Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that your USB ports are no longer functioning correctly. When you checked Device Manager under device status you see this message" cannot verify the digital signature for the drivers required for this device".
As they were previously working have you tried rolling back the drive in Device Manager?
Have you ran the HP Support Assistant to acquire any HP updates?
Have you tried using MS Fix it ?
Here is a link to the recommended drivers for your notebook. HP Pavilion dv6-6c45se Entertainment Notebook PC Drivers Please ensure you have all the latest updates installed.
If the above has not helped as it was previously working you could try a restore back to a known good date.
Using Microsoft System Restore (Windows 7)
Lastly you could do a recover back to factory.
Performing an HP system recovery (Windows 7)
There is an opportunity during the recovery to backup your personal files to prevent data loss. Now is the time to do one if not previously done.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
At any time you may contact HP support for assistance. They can remotely access your system tto help you overcome difficulties.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Using Blackberry as a Mass Storage Device is not working at all. Please advise

It does not show up in My computer.It shows up in the device managers under Universal Serial Bus Controllers as
Blackberry Smartphone I would like to be able to have access to my media card without having to use my storage card reader.I went to computer management to see if it is a drive mapping issue, but it does not even show up there so there is no letter to assign.
I have made sure that The media card is formatted.
I have a Blackberry 8310
v4.5.0.81
Media Support is set to ON
Mass Storage Mode is ON
and Auto Enable Mass Storage Mode When Connected is set to YES
It is a 4GB sandisk micro sd
The bberry is not locked.
Encryption mode is not enabled.
I do not have Acronis installed or an Iso mounters to cause any conflicts.
I am not using any network drivers.
Nothing else in plugged into any of the other ports
There are only two on my laptop and I have tried both usb ports.
It is plugged directly to a usb port and not into a hub.
My Computer's OS is XP Pro SP3
Also to reiterate, I am able to take the card out of the bberry and read it no problem through a card reader, but
that is annoying since you are supposed to be able to use see the blackberry as a mass storage device through
explorer.
And just recently as a test,I tried plugging in another blackberry, a 8800 and that one popped up no problem as a removable device in my computer. What I do not get is why Roxio Media Manager can see the 8310 and copy files over and the device manager has it listed as a smart phone under the Universal Serial Bus Controllers list. This is bizarre.
Message Edited by rllngriver on 11-19-2008 09:28 PM

Hi and welcome to the forums!
GREAT FIRST POST!! Very clear and specific. You don't know how rare that is
Is the laptop in a docking bay?
Content "encryption" meaning Content protection is turned off, right?
Are you able to backup and sync with the Desktop software?
Do you have the correct folders on the card?
Blackberry, music, ringtones, pictures, videos, voice notes?
(blackberry has to be first).
Last one, how did you format the card?
Thanks
Update device drivers manually:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13336&sliceId=SAL_Pub...
Message Edited by Bifocals on 11-19-2008 08:36 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Need mass storage dri

I have Windows XP with SP. I have a problem with my computer spontaneously re-booting every time I disconnect my Zen V from the USB port. It will immediately re-boot as if I pressed the reset button.
I suspect it may have something to do with the "?" next to the Mass Storage driver in Device manager. The software on the CD seemed to install correctly.
At first it would detect the player, and I could use it fine...the problem only came when trying to disconnect it. Now it will not detect the player at all, even though I have re-installed all the software.
Is there a standalone driver I can install manually or something for the "mass storage driver"? I installed the CD at work, and it seems to work fine there... I can disconnect and reconnect normally. On my home system is where I have this problem. It has been very thoroughly scanned for viruses and I dont have problems with any other programs I use.
Anyone have any ideas?

Hey,
If you dont post the vendor and device ID its hard to say what driver you need
Theoretically Mass Storage Controller could be related to internal card reader module. You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com
But I think you must search for Vista drivers because Equium A110 doesnt support Windows 7, only Vista.
And you must search in *Archive* on driver download page because its an older model. ;)

IMac cannot detect ANY usb mass storage device.

iMac Core 2 Duo (White) cannot detect ANY usb mass storage device including iPod. Only Mice and Keyboards work via usb. Any solutions? OS X shows absolutely nothing when any usb device is connected.

Try resetting the PRAM. Hold down Option-Cmd--P-R together at the startup chime. Wait for two more chimes, total three, then let go to finish booting.
Try an SMC Reset. Shutdown, unplug from power, wait ten minutes, still unplugged, hold power button in for five seconds. Reconnect to power.
Run the Hardware Test in extended.
http://support.apple.com/kb/ht1509
Tried a different USB port, tried a different device besides the iPod?
Some other ideas
http://reviews.cnet.com/8301-13727_7-10328879-263.html

Ovi suite messed my computer and usb mass storage ...

I had lots of problems with my C6 and had to backup it with Ovi suite before sending to nokia service.
Now I have uninstalled Ovi suite and can't connect my phone anymore as a usb mass storage drive. I also found out that while installing Ovi suite, it wasn't the only nokia program that got installed to my hard drive.
How I can not connect my phone again as a mass storage?
Win xp, sp3
And I also WANT EVERY NOKIA APP OFF MY COMPUTER. Why this ain't happening while uninstalling ovi suite (which was the only app that I wanted to install)???

Hi,
I guess the installation of Ovi Suite is corrupted, please follow the steps provided below to assist you in this regard
Step 1
- Go to Add/remove Control Panel
- Click Ovi Suite
- Click Repair.
Once repair is completed then please restart computer and check.
If Step 1 didnt work, then try the below step
Step2
-Go to Add/Remove in Control Panel
- Click Ovi Suite
- Click Uninstall
Also uninstall the following f
- Nokia Connectivity Cable Driver
- PC connectivity Solution
Then right click my computer, click manage.
- Device Manager-Ports- If you find anything by name Nokia please unistall ( Dont remove anything else)
Then reinstall windows Installer from the link provided below
For Windows 7 & Vista
http://msdn.microsoft.com/en-us/library/cc185688(v=vs.85).aspx
For Windows XP
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=5a58b56f-60b6-4412-95b9-54d056d6f9f4&dis...
- Then restart computer.
- Download and install Ovi Suite
- Restart Computer again
- Connect the device, dont open Ovi Suite and wait for all the driver to be loaded by windows.
- Once done then lauch Ovi Suite.
- Check for the issue
Hopefully this helps
Cheers
Show appreciation by clicking the kudos star :-), or gesture by typing thanks

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

Time Capsule vs. Other Mass Storage Device

I am a Mac newby seeking advice. I recently purchased the MBA below to replace my personal PC. My previous setup was a desktop with plenty of storage to handle my needs (including iTunes) and I backed up data directly to an external hard drive (I know pretty basic).
After purchasing the MBA, I realized I do not have enough internal hard drive space to store all of my music and my current external drive is too small for all the media and backup of the MBA. Also, the point of the MBA is to be mobile. Also, I would like my Sonos music system (with an application similar to iTunes) to be able to access the music library. Lastly, I have far to many songs purchase outside of iTunes to use iTunes Match. Therefore, I started seeking wireless alternatives to store my music and backup my MBA. Although an NAS would probably be ideal, I have found out through trial and error that the basic systems do not work with a MAC and the only ones with a prayer are the more expensive ones (i.e. Synology and QNAPS). Therefore, I have decided to pursue a more simplified approach.
My Internet and TV provider is CenturyLink. Their router is very basic with only 802.11g speed and without any USB ports. The following configuration has been suggested to my by some more experienced Apple users to provide wireless data access and backup.
Requesting CenturyLink provide me with a basic modem.
Purchasing an Airport Extreme (or similar wireless n router with a USB port).
Connecting the Airport Extreme (or other wireless router) to the basic modem.
Purchasing a Time Capsule (or other mass storage device).
Partitioning it using either the specific one for the Time Capsule (or Disk Utility for other mass storage devices) to provide one volume for my media and one for backup using Time Machine.
Moving the media from my old external drive (which is catalogued with folders for each artist, subfolders for each album and the songs in the subfolders) by connecting the old mass storage device and Time Machine to my MBA and using Finder to do this (see the questions below regarding this).
Moving/cataloging the media from the Time Capsule (or other mass storage device) by dragging it into the iTunes window.
Connecting the Time Capsule (or other mass storage device) to the USB port of the Airport Extreme (or other wireless router).
Setting up Time Machine to use the volume partitioned for backups.
Possibly having to move cataloging files from my iTunes, Music folder to the external drive and pointing iTunes to the Time Capsule (or other mass storage device) through Preferences, Advanced to access the music.
Overall, I am concerned with the total cost. I just spent a lot of money, not only purchasing the MBA, but also the iPad 3 and upgrading my cell phone to the iPhone 5 (I skipped the 4). It seems that by the time I purchase an Airport Extreme and a Time Capsule, I could also have just bought a NAS like the Synology 213 with 2 X 1TB drives, connect it to the existing wireless router via ethernet connections and have a more comprehensive solution. Based upon these instructions and cost concerns (and bad experience), I have several questions related to this.
Does this configuration and these instructions make sense, including those for moving and accessing my music files through iTunes (i.e. will it work)?
Are both the Airport Extreme and Time Capsule necessary to make this work easily or can I purchase alternatives to either or each and if so, what is recommended? If they are necessary, would you recommend doing this or buying one of the aforementioned NAS's to a Mac newby?
Given the file structure for my music on the old external mass storage drive, can I simply move the folders over with the subfolders containing the musice files in them or do I have to literally enter into each subfolder, select all and move them subfolder by subfolder (i.e. album by album)?
Am I missing something totally better and easier solution?
I would be massively grateful to anyone who can provide some good answers, advice and guidance. I am about to pull my hair out!!!!
Thanks,
WinoSkiBoy

They both said about the same thing except the Apple Store business tech said to buy an Airport Extreme and just attach a partitioned external third party HDD to it.
Except that is flakey for TM backup..
http://pondini.org/TM/Airport.html
And slow as the proverbial dog.. although I guess the dog is old.
And totally inadequate as a media store or server.
Apple's pricing is pretty cunning.. I really doubt you are going to find a cheaper unit to do both wireless and TM backups than the TC. And it is a perfectly good device to do that. It is good to have in the network. And Apple sure make their products work with other apple products.. so it does work better than other similar cost products.. although you miss a lot of features that Apple predecided for you.
But I don't think anyone has the ideal solution to your problem. Apple believe in cloud. And if you have fibre internet that will work really well.. forks out your money and apple will store your stuff. But for the real world most of us do not have internet connection even a fraction of speed required. And it can be another decade before we will. We need a box that is half way between a TC and media PC, a file store and a NAS. Will Apple make one.. ?? I don't think so.. They believe in cloud..
You can make the missing link one yourself. If you are so inclined.. A HP microserver running freeNAS can do TM backups and makes an excellent media store because it can do AFP. You can put a graphics card in it and plug it into your TV. You can use it with a airport extreme. But you will need a degree in Geek.. !! The synology is a preconfigured form of that.. No Geekdom required. Synology seems to have the upper hand.. this week.
Let me make a suggestion.. Figure out if you are going to jump into the Apple way of doing stuff.. which is basically itunes on computer as a server.. and the whole network.. working as part of this.. so any media is pushed from a store in itunes.. whether local or internet.. if you want to do it that way.. getting something other than the air to run itunes is well worth it. That is what a NAS cannot do.. it cannot be a media player.
Or you do hybrid.. ie you don't use put all your media into itunes, you use a bit of this and bit of something else.. As long as that can play files.. stored on NAS or even on the TC without the itunes requirement.. It won't be as pretty. But it isn't hard to get working.. as long as you accept this isn't going to be the perfect Apple solution.

PCI USB Card Does NOT Work With Mass Storage Devices

I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

[Solved] Banshee crashes while scanning USB Mass Storage mounted SGS2

I start banshee and then connect my Samsung Galaxy S2 as mass storage. It shows up in Banshee and Banshee starts to scan the folders for files, but at some point it suddenly crashes.
Any idea what is causing the problem here?
Systemd log and Banshee log is below.
EDIT: As it seems, this was a general error of the FS of the SD card. I had to format it, which is unfortunate, but it works again.
journalctl
Oct 15 14:35:03 thomas-laptop kernel: usb 2-1.3: >can't set config #1, error -110
Oct 15 14:35:03 thomas-laptop systemd-udevd[6129]: inotify_add_watch(7, /dev/sdf, 10) failed: No such file or directory
Oct 15 14:35:03 thomas-laptop systemd-udevd[6130]: inotify_add_watch(7, /dev/sde, 10) failed: No such file or directory
Oct 15 14:35:03 thomas-laptop udisksd[994]: Cleaning up mount point /run/media/thomas/0148-1EE4 (device 8:80 no longer exist)
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sdf): FAT read failed (blocknr 5959)
Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668673
Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668674
Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
Oct 15 14:35:03 thomas-laptop kernel: Buffer I/O error on device sdf, logical block 48668675
Oct 15 14:35:03 thomas-laptop kernel: lost page write due to I/O error on sdf
Oct 15 14:35:03 thomas-laptop mtp-probe[6147]: checking bus 2, device 14: "/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb2/2-1/2-1.3"
Oct 15 14:35:03 thomas-laptop mtp-probe[6147]: bus: 2, device: 14 was not an MTP device
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5924) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5925) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5926) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5927) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5928) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5929) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5930) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5931) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5932) failed
Oct 15 14:35:03 thomas-laptop kernel: FAT-fs (sde): Directory bread(block 5933) failed
Banshee log
[Warn 14:35:03.278] Caught an exception - GLib.GException: Datei oder Verzeichnis nicht gefunden (in `gio-sharp')
at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource.SyncPlaylists () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapSource.Flush () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapSource.Dispose () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapService.UnmapDevice (System.String uuid) [0x00000] in <filename unknown>:0
[Warn 14:35:03.279] Caught an exception - GLib.GException: Keine Berechtigung (in `gio-sharp')
at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource.SyncPlaylists () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapSource.Flush () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapSource.Dispose () [0x00000] in <filename unknown>:0
at Banshee.Dap.DapService.UnmapDevice (System.String uuid) [0x00000] in <filename unknown>:0
Unhandled Exception: GLib.GException: Datei oder Verzeichnis nicht gefunden
at GLib.FileAdapter.EnumerateChildren (System.String attributes, FileQueryInfoFlags flags, GLib.Cancellable cancellable) [0x00000] in <filename unknown>:0
at Banshee.IO.Gio.Directory+<GetFiles>c__Iterator6.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource+<>c__Iterator0.MoveNext () [0x00000] in <filename unknown>:0
at Banshee.Dap.MassStorage.MassStorageSource.OnImportFinished (System.Object o, System.EventArgs args) [0x00000] in <filename unknown>:0
at Hyena.Collections.QueuePipeline`1[System.String].OnFinished () [0x00000] in <filename unknown>:0
at Banshee.Collection.ImportManager.OnFinished () [0x00000] in <filename unknown>:0
at Banshee.Collection.Database.DatabaseImportManager.OnFinished () [0x00000] in <filename unknown>:0
at Hyena.Collections.QueuePipeline`1[System.String].OnElementFinished (System.Object o, System.EventArgs args) [0x00000] in <filename unknown>:0
at Hyena.Collections.QueuePipelineElement`1[System.String].OnFinished () [0x00000] in <filename unknown>:0
at Hyena.Collections.QueuePipelineElement`1[System.String].Processor (System.Object state) [0x00000] in <filename unknown>:0
Last edited by slosd (2012-10-15 14:50:03)

Hello, i too have random freeze without any "usable" info.
The blame "may" (well i think it is) be a "baytay + i915 kernel drivers" fault, these thread are intresting :
- https://bugs.freedesktop.org/show_bug.cgi?id=88012
- https://github.com/OpenELEC/OpenELEC.tv/issues/3726
what intresting is that there is path (for use of "legacy-turbo"), sory not remenber where i get it
-- gpu-drm-i915-fix-vlv-crash.txt --
Revert back to legacy turbo for vlv, fixes random crashes.
Reported by Timothée Giet <[email protected]> on dev@ ml.
https://bugs.freedesktop.org/show_bug.cgi?id=88012#c33
--- linux/drivers/gpu/drm/i915/i915_irq.c.orig
+++ linux/drivers/gpu/drm/i915/i915_irq.c
@@ -4361,12 +4361,7 @@ void intel_irq_init(struct drm_i915_priv
INIT_WORK(&dev_priv->rps.work, gen6_pm_rps_work);
INIT_WORK(&dev_priv->l3_parity.error_work, ivybridge_parity_work);
- /* Let's track the enabled rps events */
- if (IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
- /* WaGsvRC0ResidencyMethod:vlv */
- dev_priv->pm_rps_events = GEN6_PM_RP_UP_EI_EXPIRED;
- else
- dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
+ dev_priv->pm_rps_events = GEN6_PM_RPS_EVENTS;
setup_timer(&dev_priv->gpu_error.hangcheck_timer,
i915_hangcheck_elapsed,
I did use the trik on a custom kernel, i do have freeze (none tomoroy but two today but only on using firefox, so may be another probleme (sna)) but not on video (well i had run 15 video same time, and two where running 2 hours after without crash). May be you should try it (i think it work better).
note : link to make custom kernel -> https://wiki.archlinux.org/index.php/Ke … raditional

BB 9360 Curve don´t connect the mass storage to my usb car audio system.

Hello:
I´ve got a BB 9360 curve. There is no problem when i connect to my PC, It questions if i want connect mass storage, charge, etc...
But when i connect it to my USB car audio system, it connects automatically to charge without any message or option to connect to mass storage, and i can not access to my music stored in the memory card.
Waiting your answers, so many thanks to all.

Hello xaxu and welcome to the BlackBerry® Support Community Forums.
Thanks for your question on Mass Storage mode.
Currently, Mass Storage mode is supported when the BlackBerry® smartphone is connected to a Windows® or Mac® based computer system.
Hope this answers your question.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Mass Storage/ Com port

Similar Messages

Maybe you are looking for