Mass storage controller Compaq Presario R4025CA (win7 64bit)

looking for the driver mass storage controller Compaq Presario R4025CA (win7 64bit)

ha!!?? what!!?? what a high end gaming laptop no 64bit driver!!?? i want to use 64bit windows because i want to use Adobe CS5!!! I bought this high end laptop is for multimedia design purpose!!! Please help!!! Can ask the tech team to see whether can make a 64bit driver for me??!!   

Similar Messages

  • Win7 64Bit Mass Storage Controller Driver Needed for GX720!!!

    Hi MSI Tech!!
    I have setup windows 7 64bit into my MSI GX720 laptop. It take 10min to startup the windows every time i start it up. Whats the problem?? And i can't find the 'Mass Storage Controller' & " Unknown device' driver for it!! Can you guys help provide the driver for me? Thanks.

    ha!!?? what!!?? what a high end gaming laptop no 64bit driver!!?? i want to use 64bit windows because i want to use Adobe CS5!!! I bought this high end laptop is for multimedia design purpose!!! Please help!!! Can ask the tech team to see whether can make a 64bit driver for me??!!   

  • [ms-1719/gx700] - windows 7 64bit - mass storage controller driver missing

    Hi,
    I have a question about finding/installing the mass storage controller driver, after a clean install of win7 sp1 64bit (home edition).
    I bought a new drive (Seagate ST9500420AS), onto which I installed the OS.
    I thought the OS itself was supposed to install this driver?.....I looked at Seagate's site and they say the same thing. For good measure I used the "live update 5" MSI utility to see if they could provide it for my mobo....nothing useful came up there, and also looked at their page for my laptop model (GX700) no such drivers available either....neither for XP/Vista, let alone win7 64bit.
    After installing the OS I also went out to Intel's site and downloaded/installed the latest chipset drivers for my mobo/chipset as well.....that didnt fix it.
    so question is, where can I find this if none of the above worked??.
    here's my detailed specs page:
    http://speccy.piriform.com/results/wrsR2VbtVA042hKxLkCy1sR
    thanks,
    paul

    guys,
    thanks a lot for the quick replies.
    @Stu:
    I was actually wondering about those...if those micro reader drivers were what I needed...thanks for confirming and point at the x64 version. I'll put them on pretty soon, see what happens.
    @Henry,
    no, I wasnt aware about that at all.....but now that you mentioned it, it makes sense, the difference between my old sata1 and the new sata2. I am pretty inexperienced when it comes to messing w/ hardware, so the question is where would I get a jumper block like that?
    also if I leave it as I have for the last 2 months since I had the new HD, what could happen w/out our the jumper block?....data loss/corruption, anything like that or worse??.....just wondering if it'd be ok for me to leave it as is, or if there are any issues that can come up, for which it'd be worth for me to get the jumper and install it as you mention.
    also if not having this jumper does cause any issues, I was wonder if it could cause certain blank-out crashes that I've been having, which seemed so far to be related to vidcard.....but not sure if this difference between sata1 and sata2 could actually be causing these....here is the thread for that if you have any thoughts...
    https://forum-en.msi.com/index.php?topic=152390.msg1127936#msg1127936
    thanks again,
    paul

  • Satellite Pro P300: Need Vista 64bit 'Mass storage controller' driver

    Hi, please help.
    I've just upgraded my laptop from Windows Vista 32bit to Vista 64bit.
    I've managed to find all the drivers apart one: The 'Mass storage controller' driver (yellow exclamation mark in Device Manager).
    I don't know where to look for this driver.
    Any help would be appreciated. Al

    Hi
    I assume you didnt search in forum for similar questions? Is it right?
    I think Im right because I searched in the forum and found this Toshiba FAQ doc.
    +No Windows XP driver for PCI Memory Controller+
    http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm
    Here you can find this text passage:
    After installing Windows XP there could be a yellow exclamation mark by a "PCI Memory Controller" or *"Mass Storage Controller"* in the device manager.
    _Solution:_
    This device is likely the Turbo Memory former Robson module.
    This hardware will only supported by Windows Vista.
    Therefore there is no Windows XP driver.
    Now everything should be clear ;)

  • Satellite P505D-S8934 mass storage controller driver for win7

    Dear Expert,
    Anyone know where can i download the Satellite P505D-S8934 mass storage controller driver for win7? please help.
    BR
    Gryloo

    Hi gryloo,
    You can download all drivers for your notebook on this page:
    http://www.csd.toshiba.com > Download
    As far as I know for Mass Storage Controller you have to install the card reader driver.
    Check this!!!

  • Equium A100-027 - Missing driver for mass storage controller

    Hello,
    after installing Windows 7 32bit, Multimedia Card Reader not working. All updates and drivers are installed, except mass storage controller driver, I can't find this driver anywhere.
    Please help
    Thanks

    Try to install driver designed for A200 or A210. Maybe this will help. If not, who cares about card reader. Point is you can use Win7 and everything else works perfectly.
    Disable this device in device manager and be happy.

  • Satellite P200-1JY - Mass storage controller driver under windows 7

    Hi,
    I own a P200-1JY PSPB6E, and I have installed Windows 7. One device have no driver found, this is the "mass storage controller" and I havn't found this driver....
    I am the only one with this problem?
    regards.

    Hi
    You not alone.
    I aso had this on a P500 when doing a clean install of Win7.
    Go to the Toshiba website for your region and download the Win7 Toshiba drivers for the driver issue you have ...P200 I found here -http://support.toshiba-tie.co.jp/windows7/download/Satellite_P200_32_au.htm
    There's a storage config atch here as well which I think resolved my issue of a few weeks ago...
    Windows7
    Driver
    PatchFiles(TOSHIBA Storage Configuration Patch for Windows7)
    BR/
    Rob

  • Device Manager displayed " Mass Storage Controller (Code 28)"

    Greetings to all Members
    I am using AMD 64 x2 3800+ processor. MSI mortherboard K8N Diamond. Graphic cards, two units, Geforce GTX6600GT. I am running on Window XP SP2. I have also updated the AMD latest drivers.
    I noticed each time I log on the computer, the computer would prompt "New Mass Storage Hardware Found" and prompt the wizard to install new found hardware.
    I went to device manager and noticed the device status display "This drivers for this device are not installed (Code 28). I have also carry out all the steps as suggested from the device manager menu. Mass Storage Controller location is: PCI Slot 9 (PCI 3, device 0, function 0 is displayed at the Mass Storage Controller Display. The device Instance ID display "PCI\VEN_1095&DEV_3132&SUBSYS_710A1462&REV_01\4&14AECDBO&0&0060.
    Try update driver option but to no success. Have all the driver systems (in the CD) that came together with the system installed as well. Again to no success in resoluting the problem.
    To my horror after installing the drivers that I have downloaded from MSI website for the said board.
    I notice the Virtual drive program failed to initialize.and the following messages were displayed during the installation of the website drivers for the said mortherboard:
    There was a problem installing this hardware
    Mass Storage Controller
    An error occured during the installation of the device. The name is already in use as either a service or a service display name.
    Can someone please help me to resolve this problem? Any suggestion or advise would be sincerelt appreciated.
    Best Regards
    Harry
    Can someone please assist and provide me with some guidelines to resolve this problem.

    Hi Bas
    I manage to remove the yellow exclamation mark from the hardware, device manager by setting the Integrated Peripherals on Board Sil3132 mode from Sata to Raid.
    The Sata and Raid controllers is displayed and upon opening it up further, I noticed the following controllers are displayed:
    1 ) FarStone CDAWDM2001 SCSI Host Adapter.
    2)  Silicon Image SIL3132 SataRaid Controller.
    Do you think I have set the right thing? Your kind opinion on this. I am using BIOS version used is 1.A
    Thanks
    Best Regards
    Harry

  • Need mass storage controller for Equium A110-147

    Hello. I have an Equium A110-147 running windows7 ultimate with 2g of ram and a 500 g hard drive.
    In other devices in device manager I am informed that my mass storage controller drivers are not installed. When I try to update the drivers I am told the drivers cannot be found on my computer or on the web.
    I would apreciate some help on this if possible please.

    Hey,
    If you dont post the vendor and device ID its hard to say what driver you need
    Theoretically Mass Storage Controller could be related to internal card reader module. You can download it on official Toshiba website:
    http://eu.computers.toshiba-europe.com
    But I think you must search for Vista drivers because Equium A110 doesnt support Windows 7, only Vista.
    And you must search in *Archive* on driver download page because its an older model. ;)

  • Mass storage controller problem

    i have a toshiba satelite m45 and have reinstalled windows xp sp3.i downloaded all the neccesary drivers but still get a popup saying new hardware was found (mass storage controller)i looked in the device manager but there isnt any question marks to the uninstalled hardware.its allways fails when i try to update it,and can never figure out how to fix it.
    and before that i had this error "texas instruments pcixx21 integrated flashmedia controller".it was the same and didnt show a question mark in the device manager.i eventually got that to go away buy installing the drivers over again.is this a common problem,and does anyone know how to fix it?thanks

    i tried to install the flash media driver and it popped up found hardware for the texas instruments pcixx21 integrated flashmedia controller and mass storage controller.both says were not installed properly.i have a screenshot also.
    screenshot

  • Unrecognised Mass Storage Controller on Satellite A100-680

    Hello,
    I have a Satellite A100-680 (PSAA9E) that has been running XP Home for about two years. Very satisfied!
    I decided to upgrade to Vista Business, which worked very well (actually impressed by easyness of install).
    The machine works perfectly , there is only one irritating factor - under Device Manager - Other devices I have some thing called Mass Storage Controller and it does not have a driver loaded. I have been trying to locate one, but I have no idea what to look for.
    Vista at some point suggested some Texas Instrument PCI device, but..... let me put it this way..... luckily I did not have to reinstall since I had made an image backup of the disks.
    Can anyone give me a hint what I should look for.
    Thanks in advance
    Hans
    Edited by: Admin

    Really nice, that your Win Vista installation worked so good.
    For this unrecognised device, I too think that it is the Texas Instrument card reader.
    Go there: http://eu.computers.toshiba-europe.com
    And download the Flash Media Driver and maybe SD Memory Format. Install them, reboot and device should be installed without any problems.

  • Satellite M70: Need mass storage controller & card reader driver

    First issue: I want the driver of (mass storage controller).
    Second issue: I have card reader but it doesn't work.

    First issue: all you need you can find on Toshiba download page under http://eu.computers.toshiba-europe.com
    Second issue: I presume the hardware is not installed properly. For that you need to install TI 5 in 1 Card Reader driver.
    If you can not configure all this please use delivered recovery DVD and install OS. After doing this everything will work again.

  • Satellite A200-1CR - Driver for Mass Storage Controller

    On my Satellite A200-1CR / Windows 7 Pro I see yellow "Mass storage controller" in device list. What driver I should install?
    Also my cardreader is not work now.

    Hi mate
    In your case I recommend checking the Device ID and Vendor ID which helps you to get more details about the device and needed driver.
    Here you can find a nice HowTo:
    [How to identify an unknown device?|http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]
    If the Mass Storage Controller is the Card Reader device, then you would need the Flash Media Driver but I found only the driver for Vista, however, I recommend checking this driver even if its has been released for Vista and not for Win 7
    <img src='http://img840.imageshack.us/img840/3059/captureic.jpg' border='0' width='550px'/>

  • Satellite A100 - need driver for Mass Storage Controller

    Needed to use the recovery disc and now can not find driver for "Mass Storage Controller".
    according to device manager :
    Device Type : Other devices
    Manufacturer : Unknown
    Location : PCI bus 7, device 6, function 2
    suggestions, advise requested

    Your description is incomplete.
    What OS did you install?
    What notebook model A100-xxx do you have exactly
    You said you used Recovery disk is it right???
    I wonder why the unknown device appears in device manager if the recovery disk has been used. ?:|
    Recovery disk installs all drivers and usually no unknown devices should be visible in device manager

  • Satellite M100 - Driver for Mass Storage Controller

    Please help. I keep getting the message hat I have no driver for my Mass storage controller. I have downloaded and re-downloaded the Toshiba drivers. Microsoft cant find anything.
    It seems to be PCI bus 5, device 6, function 2.
    Can anyone help (in laymans terms please). This is driving me crazy.
    Thanks

    Hi Tellgio,
    Which Toshiba drivers you have reinstalled exactly? Im pretty sure that you dont have installed all drivers because you still have a yellow exclamation mark in device manager
    Furthermore it would be interesting to know which OS is installed
    I had also a yellow exclamation mark on Mass Storage Controller and in my case it was a missing Card Reader driver. So you should install this driver from official Toshiba website:
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

Maybe you are looking for

  • Profit Center upload using LSMW

    Hello, I have created a LSMW project for profit center upload using the BAPI methodology, BUS0015(Profit center)/CREATE(method) PROFITCENTER_CREATE(message type) PROFITCENTER_CREATE01(basic type) The Idoc inbound seeting are set as follows : File por

  • Is there any way to add a text variable in Illustrator CS3?

    To keep track of our proofs, I have a text box in Illustrator with the date and time that I would like to automatically update everytime I save the file. This is possible in InDesign by inserting a text variable. Is there a way to do this in Illustra

  • Network adapter not working, wireless button on Hp 655 AMD E1-1200 APU Remains orange

    The Hp controller driver is not found n the system. The device details are: PCI\VEN_168C&DEV_0036&SUBSYS_18E3103C&REV_01PCI\VEN_168C&DEV_0036&SUBSYS_18E3103CPCI\VEN_168C&DEV_0036&CC_028000PCI\VEN_168C&DEV_0036&CC_0280 Please, link me to the driver fo

  • Purchaser Order Locking Problem In PROXY interfaces

    Hello Experts, Scenario is as follows landscape is  : NON SAP system ->> PI --> ECC Documents flowing is Purchaser order create and change Problem is like when i receive same purchase order for change in few fraction of seconds and multiple time as i

  • BSP error : access to URL is forbidden

    Hi, We have a BSP page embeded into the CRM WEB UI. we have a search page. It used to work fine but after an SP6 upgrade we are facing the below error. SAP Note The following error text was processed in the system: BSP exception: Access to URL /sap(b