Mass storage device usb driver for windows 7 professional

Name: Mass Storage
Device ID: USB\VID_8564&PID_1000\0526DL9JNR9Z494R
Error code: 28

Code 28
The drivers for this device are not installed. (Code 28)
Recommended resolution
Install the driver
In the device's Properties dialog
box, click the Driver tab,
and then click Update Driver to
start the Hardware Update Wizard.
Follow the instructions to install the driver.
Note You may be prompted to provide the path of the driver. Windows may have the driver built-in. If you are asked
for the driver and you do not have it, you can try to download the latest driver from the hardware vendor's website.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Similar Messages

How to install USB driver for Windows?

I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
Can anyone make sense of this for me?

Orthoducks wrote:
I'll so my best to answer the questions.
>...what you're looking to do a transfer with...?
Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
>Also, have you tried any other computers?
No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
>And which software version if your phone currently running?
That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
>Often times, the device drivers you're prompted to install are supported solely by the computer's software.
I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
Good Luck

I am confused by the installation step that requires you to create a bootable USB drive for windows installation. What is the ISO image and why has it selected my Passport backup drive as the destination disc?

In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation. To do so, I must choose an ISO image. What is that? When I click "choose" I don't understand the options presented. Is this the destination of the partition or where Windows will reside on the Mac? Why does it also indicate the the destination disk si my WD Passport Back up drive?

OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive). I also have the discs for both 64bit and 32bit Windows along with the product key. I am still not sure what to do when faced with the options after "choose".

HT201269 how to download apple usb driver for windows 7 32 bit

how to download apple usb driver for windows 7 32 bit

Try this:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
Then install this:
http://support.apple.com/kb/dl1614
Windows XP Service Pack 2 or later
32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

Apple Mobile Device USB Driver missing Windows 8.1

Have just downloaded iTunes 11.3 but it now doesn't recgonize my 6th Gen. iPod nano. Have narrowed it down to a missing Apple Mobile Device USB Driver in the Device Manager but there isn't a potential alternative to the iPod i.e. another device to choose from.
How can I re-install/download this driver?
Thanks.

OK. I found my answer, thanks to another posting.
Uninstall iTunes
Uninstall Apple Software Update
Uninstall Mobile Device Service
Uninstall Bonjour
Uninstall Application Support....all in this order.
Clear everything from Trash.
Restart PC
Install latest version of iTunes.
It worked!

I disabled "Apple Mobile Device USB Driver" in Windows

I did this because my device wasn't charging and I was trying (still am trying) to solve that problem.
But once I disabled the "Apple Mobile Device USB Driver" under the Device Manager the device didn't dhwo up with an "X" next to it it just went away. And now when I plug in ipods it will not show up at all!
I even booted into safe mode expecting to see more drivers there and I still didn't see the apple one to re-enable it. I should have deleted it then it would have just come back on a re-boot!
Anyone have any suggestions?

Re-installing the apple mobile device support under add and remove programs fixed this issue. Found this after many iTunes re-installs.
Still have a charging issue. I will post that in a different message.

No USB driver for windows 8.1 with Lenovo IdeaPag Yoga 13

Dear Lenovo support,
I want to do develop on Windows and to do this I need to connect my Android smartphone device to test my applications on my Lenovo but for that I need to install the appropriate USB driver.
I have a Lenovo IdeaPag Yoga 13 with Windows 8.1 as my Operating System.
For Windows 8, I found the appropriate USB driver
https://support.lenovo.com/us/en/products/laptops-and-netbooks/yoga-series/yoga-13-notebook-ideapad?...
BUT unfortunately the USB driver is not available for Windows 8.1!!
I would appreciate if you can recommend me a solution.
Thank you for your time
Xavier Clapin-Pépin
[email protected]

Hi,
Yes, to have Windows install important updates as they become available, turn on automatic updating. Follow this guide to check if you have turn it on:
How to configure and use Automatic Updates in Windows
http://support.microsoft.com/en-us/kb/306525?PHPSESSID=84a741c141dbf42967fdc3dab9336869
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Making a bootable USB Drive for Windows 8 Release Candidate; How To?

Hello everyone,
I am in the process of building a Windows PC and I need to make a bootable USB Thumb Drive to Install the Windows 8 Release Candidate on. The only problem is when I go into the restore section of Disk Utility it always comes up with either of these errors:
Thanks in advance,
Sean.

I have created PC bootable USB's on Mac OS X before but I am having trouble finding the instructions to duplicate that. It's been a while. It's not impossible though.

Usb driver for windows 7 for SW3

How do I connect my SW3 to my windows 7 PC. Windows cant find drivers and neither can I!
I was wanting to check if there were any updates to the SW3 software and it told me to connect to my PC (the reason is that I was wanting to see if sleep tracking is available yet).
Has anyone found the drivers please?
Thanks
Bruce
Solved!
Go to Solution.

What if you disable your firewall and antivirus?
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

PCI Communication Controller and USB Mass Storage Device driver was missing

Hi,
Recently i formated HP Pavilion Slimline 400 PC series and reinstalled with windows 7 32 bit.\
initially i found a lot of driver was missing. i have gone through hp support forums and almost all drivers are running on 64 bit with minimum requirement OS windows 8.1.
i couldn't find it anywhere. under device manager, these two devices are being shown with yellow exclamation
PCI Simple Communication Controller :
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_2AF7103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780
USB Mass Storage Device :
USB\VID_054C&PID_02A5&REV_0100
USB\VID_054C&PID_02A5
Please kindly provide the link for the drivers, so i can use my PC.
thanks in advance

Hi:
Did you install the USB3 controller driver so the device you installed could work?
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21129&lang=eng&ProdId=3467
The USB Mass Storage Device is something you have connected to the PC.
Specifically a Sony® MicroVault USB Flash Drive.
If my suggestion to let windows update find the Intel Management Engine driver, didn't work, see if this driver from Intel works. It also has the hardware ID for that device in the setup information file.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=22093&lang=eng

Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

Need Driver for Windows 98

I just got this iPod Nano and it wont load the driver or iTunes on my windows 98. Is there some place I can get the driver for Win98?

Useful links
iPod USB driver for Windows 98
Guide to iPod and Windows ME
Anapod Reinitializer 1.0.0
Anapod Reinitializer is a free, lightweight utility for reformatting and reinitializing your iPod. Its function is equivalent to the Restore button in the Apple iPod Updater utility. Anapod Reinitializer runs on all versions of Windows, so it allows Windows 98/ME users (who cannot use Apple's software because it only runs on 2000/XP) to format their iPods.
Anapod Explorer 8.7.3
Anapod Explorer is hands-down the most advanced Windows software companion for your iPod. Anapod can copy and backup iPod music and playlists to your PC and integrates your iPod into Windows Explorer as a full-fledged device under My Computer, allowing you to transfer files to your iPod as well and use a familiar Explorer interface to manage on-board music, playlists, contacts, notes, and more. Also included are a built-in database called AnapodSQL and a one-of-a-kind web-based streaming interface to your iPod called Anapod Xtreamer.

Help using my zen touch to use as a mass storage device

Hello all I have a zen touch DAP-HD004
Does anyoe know of a way to use this as a mass storage device not just for audio media files,
any help would be greatly apreciated
thanks
paul roy

Okay, usb_modeswitch works fine. There is one odd quirk though... Arch is set up so that it loads XBMC by default (I'm using this as a media PC). On my old wifi adapter, which does not need modeswitch, the weather and news on XBMC update immediatly when it is started. With this wifi adapter they do not update at all. I can tolerate this though, but if anyone has any suggestions on how to fix this I'd appreciate it. Thanks!

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Mass Storage Driver Severe Crash - USB Mass Storage device useless

I am running the latest, updated version of OSX Leopard; Hardware Growler; and Parallels Desktop. Today, as I was doing a very resource-intensive task on Windows XP - via parallels - I plugged in my Samsung M610 to try to access the memory card. I then closed Windows XP, and noticed that my cpu was still registering at 100% output. Opening Activity Monitor and looking at the processes there, I saw that Mass Storage was taking 100.00 units of CPU output, and was not responding, I immediately clicked end process. Much to my dismay however, Activity Monitor then proceeded to lock up, so I forced it to quit, which caused finder to lock up in turn. Throughout this time, my cpu was still working overtime, so I decided to power the computer off. Upon rebooting and much "whew"-ing I tried to plug my Cell Phone in again; as usual Hardware Growler notified me of the connection and it's details, however, confusingly finder had no knowledge of any mass storage connection. After multiple connects and reconnects, testing all USB ports on my MBP (and being annoyed by the system telling me to properly find and eject hardware before removing it, which I suppose I should take as a good sign) my memory card remained invisible to finder. Hardware growler continues to perfectly recognize the device connection.
The most odd thing about this particular problem, is that other USB devices are recognized... at least one other Mass storage device is, but I have only one other device to test at the moment.... Any help would be greatly appreciated.

Check the following link and find the part of the text "Common resolutions for Code 10 error".
http://support.microsoft.com/kb/943104/en-us

Mass storage device usb driver for windows 7 professional

Similar Messages

Maybe you are looking for