Mass Storage Help Needed

New to this phone, tried last night to transfer music from Tunes to phone, at first it did it then said I needed to turn my mass storage on - which I did and saved , but it kept telling me to retry and turn it on. then the music I had originally had sent across had disappeared.
can anyone help or please tell me where the best manual for help is
thanks

Check the below knowledge base article on how to transfer iTunes to BlackBerry device.
What is BlackBerry Media Sync?
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

HELP***iCloud storage help needed

Can you let me know why if I have 14 gb of space left in my 50 gb plan that icloud won't let me back up my phone on icloud? It says I have run out of run, yet I have 14 gigs left??

The problem could be that you don't have enough storage on the device itself, not on iCloud. Go to Settings>General>Usage to see how much "Storage" you have available on the device. Farther down the list is the available storage on iCloud.
Also check:
Go to Settings>iCloud>Storage & Backups>Manage Storage; there, tap the device you need info on and the resulting screen lists Backup Options with which apps store data on iCloud as well. Tap Show All Apps to get the complete list of apps and MB used for backup storage.
A device needs many MB of storage in order to perform a backup to iCloud.
Also see: http://support.apple.com/kb/ht4847`

Ipod 4th gen Win XP needs a mass storage driver but can't find one

Hi Guys,
Just got a new PC, Ipod Was fine on my old one. However under Win XP, Ipod update and Itunes all installed correctly, but XP keeps asking for a MAss Storage driver. Tried alsorts of things including reinstallation of all iPod Software, but still as soon as I plug in my iPod, XP detects new hardware and asks for driver. ITunes doesn't detect iPod, but will happily play songs in my Library.
Help.
Maybe I need an idriver or an iXP operating system
Cheers
Andy.

Its a new PC, so the install was from the original XP CD, then installed iPod and iTunes Software. I assumed the drivers where in the iPod Disc and not from the XP disc. I'll try the XP Cd.
Thanks
Andy.

Help using my zen touch to use as a mass storage device

Hello all I have a zen touch DAP-HD004
Does anyoe know of a way to use this as a mass storage device not just for audio media files,
any help would be greatly apreciated
thanks
paul roy

Okay, usb_modeswitch works fine. There is one odd quirk though... Arch is set up so that it loads XBMC by default (I'm using this as a media PC). On my old wifi adapter, which does not need modeswitch, the weather and news on XBMC update immediatly when it is started. With this wifi adapter they do not update at all. I can tolerate this though, but if anyone has any suggestions on how to fix this I'd appreciate it. Thanks!

Need mass storage controller for Equium A110-147

Hello. I have an Equium A110-147 running windows7 ultimate with 2g of ram and a 500 g hard drive.
In other devices in device manager I am informed that my mass storage controller drivers are not installed. When I try to update the drivers I am told the drivers cannot be found on my computer or on the web.
I would apreciate some help on this if possible please.

Hey,
If you dont post the vendor and device ID its hard to say what driver you need
Theoretically Mass Storage Controller could be related to internal card reader module. You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com
But I think you must search for Vista drivers because Equium A110 doesnt support Windows 7, only Vista.
And you must search in *Archive* on driver download page because its an older model. ;)

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Help! mass storage error! please help

i was getting frequent crashes in FCP with a Xserve RAID hooked up via fiber channel card for media storage. i'd get the spinning beach ball and would have to do a manual shut down, approx every 20 minutes.
i did a complete erase and install of both system software and final cut pro software. still had problems.
i did the apple hardware test and got the following error code - MASS STORAGE: 2 STF/2/3: SLOT-3, Channel: 1, ID:0, LUN:
i got this error code ONLY when the RAID was hooked up, otherwise everything passed the test. the RAID mounts fine and in the RAID admin tools, everything gets a green light.
since i am under a deadline and don't have a lot of time to troubleshoot, i rented another G5, bought a new fiber channel card with new cables, and hooked it up to the RAID.
i am still getting the same error. again, the RAID array appears on the desktop, and the RAID admin tools finds everything ok - the fiber channel link ups, etc., check out ok.
i really need to sort this out ASAP!! if anyone has any suggestions for me, i'd be most grateful - thank you

Hey Kappy,
I haven't seen that specific error before (prob since I hardly ever do apple hardware tests), but the spinning beach ball and the restarting does sound very familiar.
If you've been getting this on both machines, my first guess is going to be a failing drive, since that can easily cause beachballs and hangs. Usually errors come up in RAID Admin, but I've personally had at least 5 times where a drive spazzes and there's no error at all to warn you (and of course applecare wont replace a drive or do anything about it til it happens, and you're screwed with performance until then) Possible things to do to troubleshoot:
1) Play a video clip in FCP and loop it. Meanwhile, check the raid's blue LED activity lights and see if any of them are out of sync (not blinking in tandem with the rest) If so, chances are that's your problem drive. If the machine starts to spazz, from what i've seen, if its a drive problem, that one drive's LED will stay solid while the others blink seldomely, which means that drive is working overtime to keep up, but can't.
2) Run drive conditioning from RAID Admin (I believe its only available under version 1.5). This will run for a while and is a great way to force the array to reveal any errors or failures in any of the drives. If you have a problem drive, this will be the best way to force it to turn yellow or red.
For time constraints/deadlines, once you find out what the problem drive is and if the blue light is acting very erradically, drive conditioning will usually trigger the yellow or red light immidately (to where you can call apple and get it replaced under applecare). If you cant wait that long, pull the drive while its still green, and the raid will run in a degraded state (but your performance will be about back to normal). Just make sure and realize that you're not protected in Raid 5 anymore at that point. Even though, this has saved me in deadlines when I had a busted drive and couldn't play back a single stream of DV.
As a seperate comment, going out on a limb and speculating (So dont hold me to it), if it was a drive issue, judging by your error, I would guess it's drive 3.
NOTE: Always have a backup

Help...Mass storage doesn't appear to work

Hi,
Just recently updated my 8900 last night where it asked to do a back-up and then did what it needed to do. didn't appear to be a problem.. until I hooked it up today.
To make a long story short.. Now when I hook it up to my USB I am no longer prompted to go into Mass storage Mode...Which is what I want...cause now it doesn't allow me to transfer files from my PC using file explorer like it use to.
My mass storage settings appear to be alright, I tried disabling it and enabling a couple times with no change.
Any advice out there on how to fix this?
Thank you.

Hello,
I am having something of the same problem. About two months ago my phone started to mess up (changing call profiles on it's own, going crazy on re-notifying (?) facebook and email notifications, etc) So I took it into Vodafone (my carrier) and they tried to just update the software, but it wasn't connecting properly, so it was sent away for repairs. It came back and all things seem to be a go - a few changes like the way the icons look on the main screen and that the lock button on top of the phone only locks the keyboard and not the whole phone anymore are not a problem, but the biggest is that I really can't connect to mass storage.
I have media card support: on
Mass Storage Mode Support: On
Auto Enable Mass Storage Mode when connected: prompt
I followed all the advice from this post: http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/HOWTO-use-your-blackberry-as-a-US...
And still nothing is working. I have just had the phone connected to the computer for a while and was charging when all of a sudden I got a message saying that because of a problem with the USB hub, my settings on the computer, etc, it couldn't charge.
Could this be a problem related to the software updates that were done when I sent the computer away for repairs? Any ideas for how to get it to work again?
Thanks,

Need mass storage dri

I have Windows XP with SP. I have a problem with my computer spontaneously re-booting every time I disconnect my Zen V from the USB port. It will immediately re-boot as if I pressed the reset button.
I suspect it may have something to do with the "?" next to the Mass Storage driver in Device manager. The software on the CD seemed to install correctly.
At first it would detect the player, and I could use it fine...the problem only came when trying to disconnect it. Now it will not detect the player at all, even though I have re-installed all the software.
Is there a standalone driver I can install manually or something for the "mass storage driver"? I installed the CD at work, and it seems to work fine there... I can disconnect and reconnect normally. On my home system is where I have this problem. It has been very thoroughly scanned for viruses and I dont have problems with any other programs I use.
Anyone have any ideas?

Hey,
If you dont post the vendor and device ID its hard to say what driver you need
Theoretically Mass Storage Controller could be related to internal card reader module. You can download it on official Toshiba website:
http://eu.computers.toshiba-europe.com
But I think you must search for Vista drivers because Equium A110 doesnt support Windows 7, only Vista.
And you must search in *Archive* on driver download page because its an older model. ;)

Help Required Email setting save to mass storage -...

HI,
I am using Nokia 701, The current setting of my phone is such that all the incomming and sent mails are saved in the phone memory. This creates problem and I have to delete the mails vary frequently from the phone. Please help me to save my emails in the mass storage or memory card.
I will be greatfull to you.
Thanks
Vinod Farmah

There is no way this can be done. Nokia messaging service always works with phone memory.
In Love With My C6-01:Now running on Nokia Belle!

HELP - Mass storage mode ??? 3G running 6.0?

Hi Folks. I am not new to Blackberry and have been a user for years. However, I have a problem and I hope someone can help me. I am trying to disable Mass Storage Mode on my recently upgraded to 6.0 Curve 3G. I click on "Options" then "device" then "storage" All it shows here is compression (checked), Media card support (checked) application storage free space, Media card storage total space, free space. that is ALL!!! THERE IS NO "enable mass storage" to check or uncheck on this page or on the dropdown menu from this page. I have spent about an hour reading online and trying to figure this out and can not find a solution. HOW DO I DISABLE mass storage mode on my Sprint Curve 3G in this new 6.0 bundle 1659?

It's stil there in BlackBerry device OS 6.0. The name is changed from 'Mass Storage Mode' to 'Media Card Support'.
From the Home screen of the smartphone, click
Options> Device> Storage> Media Card Support
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Not enough free space when there is - iTunes says I have over 9GB free but when I sync it says I can't as i don't have enough storage and need another 1.3GB! it's driving me mad!! help!!

iTunes says I have over 9GB free but when I sync it says I can't as i don't have enough storage and need another 1.3GB! it's driving me mad!! help!!

Check carefully. Perhaps you are trying to copy 9 GB plus 1.3 GB for a total of 10.3 GB. That would give you the message you see.

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I need to update my nikon D800 firmware but my Macbook Pro does not load a mass storage icon in my desktop, so, how can I update it if I can't get into the CF card pastes?

I'd say your sister messed up and your iPod is toasted.
Think about it... She plugged it in to another computer, she doesn't remember what she did (yeah, right), and now your iPod is not being recognized by your computer...
Also take into consideration how old is your sister, and how much does she know about electronics?

Help my computer does say USB Mass storage device

ok so i can't charge my ipod and the computer doesn't even recognize that i have connect the ipod. so i went here
http://docs.info.apple.com/article.html?artnum=305136
and it told me what to look for so i lookded for it but my computer doesn't say anything like USB Mass Storage Device or Ipod. I was wondering is there any way for me to download USB Mass Storage Device for the ipod.
If so can you help me do it.
Thanx
Ipod Video Windows XP

How about this article?
iTunes for Windows: iTunes 7 doesn't recognize iPod
http://docs.info.apple.com/article.html?artnum=304434
Patrick

Mass Storage Help Needed

Similar Messages

Maybe you are looking for