Mass structure and table Inconsistencies after upgrade

Hi all,
I'm on an upgrade project upgrading system from R/3 4.6 to SAP ECC 6.0 EHP4. After the upgrade, apparently there's a mass inconsistencies that happen in the table. There's at least 1000 table which can be activated because of this inconsistencies between runtime and DDIC based on the checking run using program RUTMSJOB.
I've tried applying note 1248769 but it does not fix the problem. I've also tried the mass checking and activation feature of report RUTMSJOB which also does not fix the problem.
Has anybody encounter this problem before? What's your solution on this problem?
Here's the pic of the condition of the table in my SE11
http://img683.imageshack.us/i/64131370.jpg/
Here's the inconsistencies which is found:
http://img375.imageshack.us/i/47550099.jpg/
Kindly note that the same error happen even after I implement the note correction 1248769.
Thanks
-Suwardi-
Edited by: Suwardi Nursalim on Jul 9, 2010 9:40 AM - Change pic link.

Hello Suwardi,
please inform which actions you took in SPDD and SPAU - this is key for a problem like yours.
Did you have a transport request ready with modifications from a previous upgrade? Please check these notes:
#68678:   Exporting modification adjustment for second upgrade
#610311: Importing modification adjustment in second upgrade from 620
Lastly, did you run the upgrade with latest sapup version AND latest upgrade fix?
Now in order to fix the problem, you'll likely have to restore from backup and perform the upgrade again. Alternatively, please check note #1406740 (are you using IBM's DB2 as your database?). If you faced the problem described on this note (which points to errors in table DD03L during EU_IMP2 phase), you need to apply FP8 like on this note.
Then you could proceed like the following to fix the problem:
1. Restore the backup from phase MODPROF immediately before the downtime including the /usr/sap/P01/upg/abap directory
2. reset the Upgrade with report RSUPGRES
3. clear the upgrade directory
4. Start the upgrade from the very beginning after installing Fix Pack 8 for your database.
Please let us know if this helped.
Tomas Black

Similar Messages

  • Differrences between structure and table in data dictionary in ABAP?

    What is the differrences between structure and table in data dictionary in ABAP?
    are they same?

    Tables :
    1. The place where the data is stored so that you can retrieve at any time.
    2. There can be more than one record stored
    Structures :
    1. The data / info stays only during the runtime of the application and will not get stored at all during the run time ....
    2. Only one record can be stored at the runtime .....
    A structure forms the skeleton of the table.
    A structure comprises components i.e., fields. Types are defined for the components A component can refer to an elementary type (via a data element or by directly specifying the data type and length in the structure definition), another structure or a table type. A structure can therefore be nested to any depth
    Tables can be defined independently of the database in the ABAP Dictionary. The fields of the table are defined with their (database-independent) data types and lengths.
    When the table is activated, a physical table definition is created in the database for the table definition stored in the ABAP Dictionary. The table definition is translated from the ABAP Dictionary to a definition of the particular database.

  • Calrification of structure and table type

    hai experts,
    what is the difference between STRUCTURE AND TABLE TYPE?

    Refer this for TABLE TYPE
    http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
    STRUCTURE
    http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb2d74358411d1829f0000e829fbfe/content.htm
    SE11, In structre u <b>cant maintain any values</b>. Its just used as a refernce.
    In tables u can maintain values.

  • Extractor andExtract structure and table Relation

    Hi All,
    Is there any system table which provides the Datasource/Extractor/ Extract
    structure and table Relation Information.
    For ex:
    Data source 2LIS_02_ITM uses following tables for data
    EKKO
    EKPO

    Hi Murali,
    I'm not really sure if there exists a table to give the information that you've asked for...
    Let me to tell you something to find out the tables referred in a datasource.
    Execute your datasource in RSA3 in Debug mode. This will give you the details of the tables used by that datasource.
    assign points if useful ***
    Thanks,
    Raj

  • How can we use IMPORT-EXPORT as structure and TABLES parameters?

    Hello Sir,
    I have used SAPRFC with single IMPORT and EXPORT parameter.
    Could anybody give me an example in I can use IMPORT/EXPORT as structure and TABLE parameter as input?
    of course from/to PHP.
    Regards,
    RH

    Thanks

  • Why has my Safari and MAIL slowed after upgrading to Mountain Lion on my MacBookPro ?

    Why has my Safari and MAIL slowed after upgrading to Mountain Lion ? I have mid-2009 MBPro and have very fast Internet access router.

    I have noticed the same thing on my MAC.  Mail has become very "clunky"- Before Mountain Lion, whenever I clicked on a msg or a function (delete), it would respond immediately.  With Mountain Lion there is an unacceptable hesitation.  What is going on with this latest update?

  • Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    Is anyone having problems with the battery drains quickly and the iphone4 heats up in use and in charging after upgrading to 5.1.1?

    I have had the same problem but I seem to be getting somewhere to fixing it!!! My battery was going down at 20% an an hour now its 10% with constant use and 5 in standby !!! So improvement all round
    First I did a restore then I drained the battery i started to charge it and when it came on I turned the phone off completely and let it charge to 100% I then left it for a couple of hours on charge at 100. I saw no improvement after 1st drain so I repeated the drain battery and charge steps again with the phone turned off when charging and have seen a very big improvement. I am going to do it again tonight and hopefully problem solved!!!!
    The next issue is iMessage as that's playing up and wifi drop out
    Good luck

  • Difference between Info structure and Table

    Hi Friends
    I need to know difference between info structure and table (updating a table using a scheduled program),Which one of this is better and why?
    Please help me to get the Pros and Cons of the two available approach.
    Thanks
       Mitesh

    Hi,
         No different, these are just transparent tables like any other. You can select data from them the same as any other transparent table.
    Refer
    https://forums.sdn.sap.com/click.jspa?searchID=4342729&messageID=1424611
    https://forums.sdn.sap.com/click.jspa?searchID=4342729&messageID=3609095
    Regards

  • HT4623 Can not get pass Term and Conditions page after upgrade?

    Can not get pass the Terms and Conditions page after upgrade?

    Restart your phone and if that doesn't help, reboot the device.
    Restart the iPhone by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reboot the iPhone by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the phone start up.

  • Table inconsistencies after EHP4 Upgrade

    Hi Experts,
    Weu2019re setting up ALE from Production to Development as well as some manual copy of table content.
    We have completed the ALE setup, but we have an issue with the table content copy.
    Some SAP tables have changed after Development was updated with EHP4.
    To be more specific,we have identified some tables ,which will need to be exported from Production (content only) via a transport, and then imported into Development.
    If we just try to export/import these tables, the transport will most likely fail, and if it doesnu2019t, there may be data inconsistencies
    If we just copy the data as is some fields would be left out unpopulated, potentially causing inconsistencies.
    I need your suggestion for best course of action.

    Hi,
    Is your development and production are on different Support pack level ? If yes, then this is normal and table structure will differ.
    why you need to export tables from production to development ?
    Thanks
    Sunny

  • Invalid data from serveral fact logical table sources after upgrade to 11g

    Hi,
    We have a situation after upgrade from 10g to 11g. Answers' querys works fine in 10g environment, but in 11g, generated SQL is not correct.
    Our example is something like that: we have orders fact table, customers and time dimensions. Customer have an hierarchy like: Customer Total -> Customer Country -> Customer Region -> Customer Detail (each level in one different physical table).
    Order's logical table source has two table sources. One sets to Customer Country level, second one Customer Region level, both with different WHERE clauses in Content tab inside LTS configuration. Both at same level of Time dimension.
    The issue is that, at dimension level, SQL is getting correct table to resolve Customer data (Customer Region level), but then, is getting the WHERE clause sets in LTS set to Customer Country level, so we are getting error data. Priority is the same to both LTS at fact table, sets to 0 (default).
    How to know the way Oracle BI Server takes one LTS instead of another one? It's supposed to take the LTS defined at the same granularity level... but is not correct this case.
    Thanks.

    Can you try one of these options:
    Try to set the priority group of lowest granular dimension to 1
    or disable the LTS that is getting the where clause and check if it works fine and then enable again.

  • Java process table empty after upgrade solution manager 7.1 Sp10

    Hi Experts,
    I have installed solution manager 7.1 SP3 and completed the SP10 patch upgrade using SUM tool. The upgrade was completed successfully. After upgrade igswd was red. Then i copied the Igs files in kernel files. Now ABAP instance and Igs is working now but JAVA is not coming up. JAVA process table also empty. Can any one help me to solve this issue. Attached the error for reference.
    trc file: "dev_disp", trc level: 1, release: "721"
    sysno      00
    sid        VSM
    systemid   562 (PC with Windows NT)
    relno      7210
    patchlevel 0
    patchno    201
    intno      20020600
    make       multithreaded, Unicode, 64 bit, optimized
    profile    \\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
    pid        5448
    kernel runs with dp version 138000(ext=120000) (@(#) DPLIB-INT-VERSION-138000-UC)
    length of sys_adm_ext is 592 bytes
    *** SWITCH TRC-HIDE on ***
    ***LOG Q00=> DpSapEnvInit, DPStart (00 5448) [dpxxdisp.c   1316]
      shared lib "dw_xml.dll" version 201 successfully loaded
      shared lib "dw_xtc.dll" version 201 successfully loaded
      shared lib "dw_stl.dll" version 201 successfully loaded
      shared lib "dw_gui.dll" version 201 successfully loaded
      shared lib "dw_mdm.dll" version 201 successfully loaded
      shared lib "dw_rndrt.dll" version 201 successfully loaded
      shared lib "dw_abp.dll" version 201 successfully loaded
      shared lib "dw_sym.dll" version 201 successfully loaded
      shared lib "dw_aci.dll" version 201 successfully loaded
    rdisp/softcancel_sequence :  -> 0,5,-1
    use internal message server connection to port 3900
    rdisp/dynamic_wp_check : 1
    rdisp/calculateLoadAverage : 1
    Tue Apr 01 19:02:09 2014
    *** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 6 seconds
    ***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c  6479]
    MtxInit: 30000 0 0
    DpSysAdmExtInit: ABAP is active
    DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
    display_tcp_ip: 0
    DpIPCInit2: write dp-profile-values into sys_adm_ext
    DpIPCInit2: start server >VKCSOL_VSM_00                           <
    DpShMCreate: sizeof(wp_adm) 42864 (2256)
    DpShMCreate: sizeof(tm_adm) 5517056 (27448)
    DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
    DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
    DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
    DpShMCreate: sizeof(comm_adm) 1384080 (2744)
    DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
    DpShMCreate: sizeof(slock_adm) 0 (296)
    DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
    DpShMCreate: sizeof(file_adm) 0 (80)
    DpShMCreate: sizeof(vmc_adm) 0 (2160)
    DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
    DpShMCreate: sizeof(gw_adm) 48
    DpShMCreate: sizeof(j2ee_adm) 3952
    DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDE0050, size: 7174832)
    DpShMCreate: allocated sys_adm at 000000000DDE0060
    DpShMCreate: allocated wp_adm_list at 000000000DDE30B0
    DpShMCreate: allocated wp_adm at 000000000DDE32A0
    DpShMCreate: allocated tm_adm_list at 000000000DDEDA20
    DpShMCreate: allocated tm_adm at 000000000DDEDA70
    DpShMCreate: allocated wp_ca_adm at 000000000E330980
    DpShMCreate: allocated appc_ca_adm at 000000000E340390
    DpShMCreate: allocated comm_adm at 000000000E34FDA0
    DpShMCreate: system runs without slock table
    DpShMCreate: system runs without file table
    DpShMCreate: allocated vmc_adm_list at 000000000E4A1C40
    DpShMCreate: system runs without vmc_adm
    DpShMCreate: allocated gw_adm at 000000000E4A1CF0
    DpShMCreate: allocated j2ee_adm at 000000000E4A1D30
    DpShMCreate: allocated ca_info at 000000000E4A2CB0
    DpShMCreate: allocated wall_adm at 000000000E4A2D40
    DpCommAttachTable: attached comm table (header=000000000E34FDA0/ft=000000000E34FDB0)
    DpSysAdmIntInit: initialize sys_adm
    rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
    dia token check not active (10 token)
    MBUF state OFF
    DpCommInitTable: init table for 500 entries
    DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
    rdisp/queue_size_check_value :  -> on,50,30,40,500,50,500,80
    EmInit: MmSetImplementation( 2 ).
    MM global diagnostic options set: 0
    <ES> client 0 initializing ....
    <ES> EsILock: use spinlock for locking
    <ES> InitFreeList
    <ES> block size is 4096 kByte.
    <ES> Info: em/initial_size_MB( 16383MB) not multiple of em/blocksize_KB( 4096KB)
    <ES> Info: em/initial_size_MB rounded up to 16384MB
    Using implementation view
    <EsNT> Using memory model view.
    <EsNT> Memory Reset disabled as NT default
    <ES> 4095 blocks reserved for free list.
    ES initialized.
    mm.dump: set maximum dump mem to 192 MB
    mm.dump: set global maximum dump mem to 192 MB
    EsRegisterEmCheck: Register EmGetEsHandles at 000000013FC48640
    DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
    MPI: dynamic quotas disabled.
    MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    J2EE server info
      start = TRUE
      state = STARTED
      pid = 5824
      argv[0] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
      argv[1] = D:\usr\sap\VSM\DVEBMGS00\exe\jcontrol.EXE
      argv[2] = pf=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
      argv[3] = -DSAPSTART=1
      argv[4] = -DCONNECT_PORT=65000
      argv[5] = -DSAPSYSTEM=00
      argv[6] = -DSAPSYSTEMNAME=VSM
      argv[7] = -DSAPMYNAME=VKCSOL_VSM_00
      argv[8] = -DSAPPROFILE=\\VKCSOL\sapmnt\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
      argv[9] = -DFRFC_FALLBACK=ON
      argv[10] = -DFRFC_FALLBACK_HOST=localhost
      start_lazy = 0
      start_control = SAP J2EE startup framework
    DpJ2eeStart: j2ee state = STARTED
    rdisp/http_min_wait_dia_wp : 1 -> 1
    ***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c   1702]
    ***LOG Q0K=> DpMsAttach, mscon ( VKCSOL) [dpxxdisp.c   12707]
    MBUF state LOADING
    DpStartStopMsg: send start message (myname is >VKCSOL_VSM_00                           <)
    DpStartStopMsg: start msg sent
    CCMS: Initialized monitoring segment of size 60000000.
    CCMS: Initialized CCMS Headers in the shared monitoring segment.
    CCMS: Checking Downtime Configuration of Monitoring Segment.
    CCMS: AlMsUpload called by wp 1024.
    Tue Apr 01 19:02:10 2014
    01.04.2014 13:32:10.628 PID=5448, TID=5744 SapTimer info. QPC/Windows time mismatch. System suspended, busy, missing ticks. Mismatch QpcTime-WindowsTime:  -168 millisec (max +0). Slept 1000 millisec, Qpc elapsed: +1000 millisec, WindowsUtc elapsed +1168 millisec. SapTime-WindowsUtcTime=-1 seconds. TotalTimeCorrection=+0 millisec, QpcTime-WindowsUtcTime=-1028 millisec (*).
    Tue Apr 01 19:02:11 2014
    CCMS: AlMsUpload successful for D:\usr\sap\VSM\DVEBMGS00\log\ALMTTREE.DAT (2189 MTEs).
    Tue Apr 01 19:02:13 2014
    CCMS: start to initalize 3.X shared alert area (first segment).
    DpJ2eeLogin: j2ee state = CONNECTED
    DpMBufHwIdSet: set Hardware-ID
    ***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1296]
    MBUF state ACTIVE
    DpWpBlksLow: max wp blocks in queue is 800 (80 %)
    MBUF component UP
    DpMsgProcess: 1 server in MBUF
    DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
    Tue Apr 01 19:02:21 2014
    DpModState: change server state from STARTING to ACTIVE
    Tue Apr 01 19:02:23 2014
    ***LOG Q0I=> NiIRead: P=127.0.0.1:61107; L=127.0.0.1:65000: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 5086]
    *** ERROR => NiIRead: SiRecv failed for hdl 33/sock 1008
        (SI_ECONN_BROKEN/10054; I4; ST; P=127.0.0.1:61107; L=127.0.0.1:65000) [nixxi.cpp    5086]
    DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
    DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=5824)
    *** ERROR => DpProcKill: kill failed [dpntdisp.c   397]
    DpIJ2eeShutdown: j2ee state = SHUTDOWN
    Regards
    Jose H.

    Hi Ashutosh,
    Thanks for your immediate reply. Please find the log below.
    trc file: "dev_server0", trc level: 1, release: "721"
    node name   : ID3506750
    pid         : 8068
    system name : VSM
    system nr.  : 00
    started at  : Sat Mar 29 13:41:08 2014
    arguments  :
       arg[00] : D:\usr\sap\VSM\DVEBMGS00\exe\jlaunch.exe
       arg[01] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
       arg[02] : -DSAPINFO=VSM_00_server
       arg[03] : pf=D:\usr\sap\VSM\SYS\profile\VSM_DVEBMGS00_VKCSOL
       arg[04] : -DSAPSTART=1
    Used property files
    -> files [00] : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    Bootstrap nodes
    -> [00] bootstrap            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] bootstrap_ID3506700  : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [02] bootstrap_ID3506750  : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    Worker nodes
    -> [00] ID3506700            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    -> [01] ID3506750            : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties
    JStartupReadInstanceProperties: read instance properties [D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\instance.properties]
    -> ms host    : VKCSOL
    -> ms port    : 3901
    -> OS libs    : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
    -> Admin URL  :
    -> run mode   : safe
    -> run action : UPGRADE
    -> enabled    : yes
    [Thr 19300] Sat Mar 29 13:41:08 2014
    [Thr 19300] JLaunchRequestQueueInit: create named pipe for ipc
    [Thr 19300] JLaunchRequestQueueInit: create pipe listener thread
    [Thr 19300] JLaunchInitSignalHandling: signal handling is disabled
    [Thr 4928] WaitSyncSemThread: Thread 4928 started as semaphore monitor thread.
    [Thr 23444] JLaunchRequestFunc: Thread 23444 started as listener thread for np messages.
    [Thr 19300] NiInit3: NI already initialized; param 'maxHandles' ignored (init=2;par=32768;cur=2048)
    [Thr 19300] MPI: dynamic quotas disabled.
    [Thr 19300] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
    [Thr 19300] CCMS: Detected Double Stack (parameter "rdisp/j2ee_start" is active)
    [Thr 19300] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
    [Thr 19300] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
    [Thr 19300] CCMS: CCMS Monitoring Initialization finished, rc=0.
    [Thr 19300] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) - using -Xmx2048m [jstartxx.c   2800]
    [Thr 19300] JStartupICheckFrameworkPackage: can't find framework package D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
    JStartupIReadSection: read node properties [ID3506750]
    -> node name          : server0
    -> node type          : server
    -> node execute       : yes
    -> jlaunch parameters :
    -> java path          : D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4
    -> java parameters    : -XX:MaxNewSize=600M -XX:NewSize=600M -XX:MaxPermSize=512M -XX:PermSize=512M -XX:+UseConcMarkSweepGC -XX:+DisableExplicitGC -XX:TargetSurvivorRatio=90 -XX:SurvivorRatio=4 -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -verbose:gc -XX:SoftRefLRUPolicyMSPerMB=1 -XX:HeapDumpPath=OOM.hprof -XX:+HeapDumpOnOutOfMemoryError -Djco.jarm=1 -Djava.awt.headless=true -Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dsun.io.useCanonCaches=false -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dcom.sap.jvm.scenario=j2ee -XX:+JavaMonitorsInStackTrace -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0 -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile -Dstartup.mode=SAFE -Dstartup.action=UPGRADE
    -> java vm version    : 4.1.024 1.6-b04
    -> java vm vendor     : SAP Java Server VM (SAP AG)
    -> java vm type       : server
    -> java vm cpu        : amd64
    -> heap size          : 2048M
    -> init heap size     : 2048M
    -> stack size         : 2M
    -> root path          : D:\usr\sap\VSM\DVEBMGS00\j2ee\cluster\server0
    -> class path         : .\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> OS libs path       : D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs
    -> main class         : com.sap.engine.boot.Start
    -> framework class    : com.sap.bc.proj.jstartup.JStartupFramework
    -> registr. class     : com.sap.bc.proj.jstartup.JStartupNatives
    -> framework path     : D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar
    -> shutdown class     : com.sap.engine.boot.Start
    -> parameters         :
    -> debuggable         : no
    -> debug mode         : no
    -> debug port         : 50021
    -> shutdown timeout   : 120 sec.
    [Thr 19300] JLaunchISetDebugMode: set debug mode [no]
    [Thr 9092] JLaunchIStartFunc: Thread 9092 started as Java VM thread.
    JHVM_LoadJavaVM: VM Arguments of node [server0]
    -> stack   : 2097152 Bytes
    -> arg[  0]: exit
    -> arg[  1]: abort
    -> arg[  2]: vfprintf
    -> arg[  3]: -XX:MaxNewSize=600M
    -> arg[  4]: -XX:NewSize=600M
    -> arg[  5]: -XX:MaxPermSize=512M
    -> arg[  6]: -XX:PermSize=512M
    -> arg[  7]: -XX:+UseConcMarkSweepGC
    -> arg[  8]: -XX:+DisableExplicitGC
    -> arg[  9]: -XX:TargetSurvivorRatio=90
    -> arg[ 10]: -XX:SurvivorRatio=4
    -> arg[ 11]: -XX:+PrintGCDetails
    -> arg[ 12]: -XX:+PrintGCTimeStamps
    -> arg[ 13]: -verbose:gc
    -> arg[ 14]: -XX:SoftRefLRUPolicyMSPerMB=1
    -> arg[ 15]: -XX:HeapDumpPath=OOM.hprof
    -> arg[ 16]: -XX:+HeapDumpOnOutOfMemoryError
    -> arg[ 17]: -Djco.jarm=1
    -> arg[ 18]: -Djava.awt.headless=true
    -> arg[ 19]: -Djava.security.policy=./java.policy
    -> arg[ 20]: -Djava.security.egd=file:/dev/urandom
    -> arg[ 21]: -Dsun.io.useCanonCaches=false
    -> arg[ 22]: -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
    -> arg[ 23]: -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
    -> arg[ 24]: -Dorg.omg.PortableInterceptor.ORBInitializerClass.com.sap.engine.services.ts.jts.ots.PortableInterceptor.JTSInitializer
    -> arg[ 25]: -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
    -> arg[ 26]: -Dcom.sap.jvm.scenario=j2ee
    -> arg[ 27]: -XX:+JavaMonitorsInStackTrace
    -> arg[ 28]: -Xbootclasspath/p:D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/connectors/AutoProbeConnector.jar;D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/Agent.jar
    -> arg[ 29]: -Dcom.wily.introscope.agent.agentName=VSM_DVEBMGS00_server0
    -> arg[ 30]: -Dcom.wily.introscope.agentProfile=D:/usr/sap/DAA/SMDA97/SMDAgent/applications.config/com.sap.smd.agent.application.wily/BytecodeAgent/ISAGENT.8.2.3.5-2011-09-13/wily/IntroscopeAgent.profile
    -> arg[ 31]: -Dstartup.mode=SAFE
    -> arg[ 32]: -Dstartup.action=UPGRADE
    -> arg[ 33]: -Dsys.global.dir=D:\usr\sap\VSM\SYS\global
    -> arg[ 34]: -Dapplication.home=D:\usr\sap\VSM\DVEBMGS00\exe
    -> arg[ 35]: -Djava.class.path=D:\usr\sap\VSM\DVEBMGS00\exe\jstartup.jar;D:\usr\sap\VSM\DVEBMGS00\exe\jvmx.jar;.\bin\boot\boot.jar;.\bin\boot\jaas.jar;.\bin\system\bytecode.jar;.
    -> arg[ 36]: -Djava.library.path=D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin\server;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\bin;D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\bin;D:\usr\sap\VSM\DVEBMGS00\j2ee\os_libs;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;D:\usr\sap\VSM\DVEBMGS00\exe;D:\usr\sap\VSM\SYS\exe\uc\NTAMD64
    -> arg[ 37]: -Dmemory.manager=2048M
    -> arg[ 38]: -Xmx2048M
    -> arg[ 39]: -Xms2048M
    -> arg[ 40]: -Xss2M
    -> arg[ 41]: -DLoadBalanceRestricted=no
    -> arg[ 42]: -Djstartup.mode=JCONTROL
    -> arg[ 43]: -Djstartup.ownProcessId=8068
    -> arg[ 44]: -Djstartup.ownHardwareId=I0649086862
    -> arg[ 45]: -Djstartup.whoami=server
    -> arg[ 46]: -Djstartup.debuggable=no
    -> arg[ 47]: -Xjvmx
    -> arg[ 48]: -XsapSystem=00
    -> arg[ 49]: -XmonGcCallback
    -> arg[ 50]: -DSAPINFO=VSM_00_server
    -> arg[ 51]: -DSAPSTART=1
    -> arg[ 52]: -DSAPSTARTUP=1
    -> arg[ 53]: -DSAPSYSTEM=00
    -> arg[ 54]: -DSAPSYSTEMNAME=VSM
    -> arg[ 55]: -DSAPMYNAME=VKCSOL_VSM_00
    -> arg[ 56]: -DSAPDBHOST=VKCSOL
    -> arg[ 57]: -Dj2ee.dbhost=VKCSOL
    (CompilerOracle read from file D:\usr\sap\VSM\DVEBMGS00\exe\sapjvm_4\jre\.hotspot_compiler)
    [Thr 9092] JHVM_LoadJavaVM: Java VM created OK.
    JHVM_BuildArgumentList: main method arguments of node [server0]
    [Thr 20084] Sat Mar 29 13:41:10 2014
    [Thr 20084] JHVM_RegisterNatives: com.sap.bc.krn.perf.PerfTimes
    2.781: [GC 2.781: [ParNew: 409600K->2306K(512000K), 0.0126041 secs] 409600K->2306K(1994752K), 0.0127881 secs] [Times: user=0.05 sys=0.00, real=0.01 secs]
    [Thr 20084] Sat Mar 29 13:41:11 2014
    [Thr 20084] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.JStartupFramework
    [Thr 20084] JLaunchISetClusterId: set cluster id 3506750
    [Thr 20084] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
    [Thr 20084] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
    Sat Mar 29 13:41:23 2014
    15.071: [GC 15.071: [ParNew: 411906K->16315K(512000K), 0.0306641 secs] 411906K->16315K(1994752K), 0.0309011 secs] [Times: user=0.13 sys=0.00, real=0.03 secs]
    Sat Mar 29 13:41:32 2014
    24.118: [GC 24.118: [ParNew: 425915K->29114K(512000K), 0.0363407 secs] 425915K->29114K(1994752K), 0.0365634 secs] [Times: user=0.11 sys=0.02, real=0.04 secs]
    [Thr 18736] Sat Mar 29 13:41:38 2014
    [Thr 18736] JHVM_RegisterNatives: com.sap.mona.api.JMonAPI
    [Thr 18736] CCMS: openMonitoringSegment(): inside static JMON Lib: already connected.
    [Thr 17644] JHVM_RegisterNatives: com.sap.mw.rfc.driver.CpicDriver
    [Thr 19340] JHVM_RegisterNatives: com.sap.security.core.server.vsi.service.jni.VirusScanInterface
    [Thr 7816] Sat Mar 29 13:41:39 2014
    [Thr 7816] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7816] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 7884
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17936] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 17/sock 7888
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    31.816: [GC 31.816: [ParNew[Thr 21936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 7856
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 2800] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 2800] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 9/sock 7860
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    : 438714K->67978K(512000K), 0.0626636 secs] 438714K->67978K(1994752K), 0.0628963 secs] [Times: user=0.11 sys=0.08, real=0.06 secs]
    [Thr 7276] Sat Mar 29 13:41:40 2014
    [Thr 7276] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7988
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 24572] Sat Mar 29 13:41:42 2014
    [Thr 24572] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24572] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 8132
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5092] Sat Mar 29 13:41:43 2014
    [Thr 5092] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5092] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 8088
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 20084] JLaunchISetState: change state from [Starting (2)] to [Starting applications (10)]
    [Thr 24276] Sat Mar 29 13:41:44 2014
    [Thr 24276] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24276] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 8480
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 1316] Sat Mar 29 13:41:45 2014
    [Thr 1316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 1316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 9292
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13068] Sat Mar 29 13:41:46 2014
    [Thr 13068] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13068] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19652] JLaunchISetState: change state from [Starting applications (10)] to [Running (3)]
    [Thr 17680] Sat Mar 29 13:41:47 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23760] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 23760] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 10/sock 5976
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:48 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:49 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 9736
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:41:50 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6272
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5348] Sat Mar 29 13:41:51 2014
    [Thr 5348] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5348] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6336
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17548] Sat Mar 29 13:41:52 2014
    [Thr 17548] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17548] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6548
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 4216] Sat Mar 29 13:41:53 2014
    [Thr 4216] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 4216] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6424
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23788] Sat Mar 29 13:41:54 2014
    [Thr 23788] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 23788] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6844
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6100] Sat Mar 29 13:41:55 2014
    [Thr 6100] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6100] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7448
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6828] Sat Mar 29 13:41:56 2014
    [Thr 6828] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6828] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6216
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 644] Sat Mar 29 13:41:57 2014
    [Thr 644] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 644] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 5992
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7376] Sat Mar 29 13:41:58 2014
    [Thr 7376] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7376] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6136
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24096] Sat Mar 29 13:41:59 2014
    [Thr 24096] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24096] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6004
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24460] Sat Mar 29 13:42:00 2014
    [Thr 24460] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24460] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6276
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13452] Sat Mar 29 13:42:01 2014
    [Thr 13452] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13452] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7328
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17884] Sat Mar 29 13:42:03 2014
    [Thr 17884] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17884] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 7372
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6616] Sat Mar 29 13:42:04 2014
    [Thr 6616] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6616] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7200
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 3136] Sat Mar 29 13:42:05 2014
    [Thr 3136] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 3136] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6344
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 8284] Sat Mar 29 13:42:06 2014
    [Thr 8284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 8284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 7380
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19240] Sat Mar 29 13:42:07 2014
    [Thr 19240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6940
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 21316] Sat Mar 29 13:42:08 2014
    [Thr 21316] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21316] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 5988
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 22436] Sat Mar 29 13:42:09 2014
    [Thr 22436] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 22436] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 7368
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 20936] Sat Mar 29 13:42:10 2014
    [Thr 20936] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 20936] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 7528
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 18784] Sat Mar 29 13:42:11 2014
    [Thr 18784] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 18784] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 4460
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 21320] Sat Mar 29 13:42:12 2014
    [Thr 21320] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 21320] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6148
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 19632] Sat Mar 29 13:42:13 2014
    [Thr 19632] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19632] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 5948
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 8684] Sat Mar 29 13:42:14 2014
    [Thr 8684] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 8684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6012
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 7468] Sat Mar 29 13:42:15 2014
    [Thr 7468] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7468] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6032
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5588] Sat Mar 29 13:42:16 2014
    [Thr 5588] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5588] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 1032
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 2036] Sat Mar 29 13:42:17 2014
    [Thr 2036] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 2036] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6052
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 6692] Sat Mar 29 13:42:18 2014
    [Thr 6692] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6692] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6188
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5184] Sat Mar 29 13:42:19 2014
    [Thr 5184] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5184] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6192
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 5604] Sat Mar 29 13:42:20 2014
    [Thr 5604] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5604] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6220
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 15996] Sat Mar 29 13:42:21 2014
    [Thr 15996] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 15996] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:22 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:23 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:24 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6236
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:26 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6064
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19856] Sat Mar 29 13:42:27 2014
    [Thr 19856] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19856] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6184
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24128] Sat Mar 29 13:42:28 2014
    [Thr 24128] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24128] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6248
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 13684] Sat Mar 29 13:42:29 2014
    [Thr 13684] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 13684] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6260
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7384] Sat Mar 29 13:42:30 2014
    [Thr 7384] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7384] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6264
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7432] Sat Mar 29 13:42:31 2014
    [Thr 7432] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7432] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6292
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6700] Sat Mar 29 13:42:32 2014
    [Thr 6700] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6700] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6304
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7272] Sat Mar 29 13:42:33 2014
    [Thr 7272] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7272] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6340
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 19864] Sat Mar 29 13:42:34 2014
    [Thr 19864] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 19864] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6392
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 5608] Sat Mar 29 13:42:35 2014
    [Thr 5608] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 5608] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6404
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 7160] Sat Mar 29 13:42:36 2014
    [Thr 7160] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7160] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6416
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 14536] Sat Mar 29 13:42:37 2014
    [Thr 14536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 14536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 7340
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24404] Sat Mar 29 13:42:38 2014
    [Thr 24404] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24404] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6232
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 22756] Sat Mar 29 13:42:39 2014
    [Thr 22756] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 22756] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6076
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6284] Sat Mar 29 13:42:40 2014
    [Thr 6284] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6284] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 7472
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 12696] Sat Mar 29 13:42:41 2014
    [Thr 12696] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 12696] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 35/sock 6380
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 24180] Sat Mar 29 13:42:42 2014
    [Thr 24180] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 24180] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 36/sock 6420
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 23444] Sat Mar 29 13:42:43 2014
    [Thr 23444] JLaunchRequestFunc: receive command:17, argument:0 from pid:20668
    [Thr 23444] JLaunchIShutdownInvoke: set shutdown interval (stop:1396080763/end:1396080883/TO:120)
    [Thr 23444] JLaunchProcessCommand: Invoke VM Shutdown
    [Thr 23444] JHVM_FrameworkShutdownDirect: invoke direct shutdown
    [Thr 8780] JLaunchISetState: change state from [Running (3)] to [Waiting for stop (4)]
    [Thr 8780] JLaunchISetState: change state from [Waiting for stop (4)] to [Stopping (5)]
    [Thr 5188] JHVM_RegisterNatives: com.sap.bc.proj.jstartup.sadm.ShmCache
    [Thr 7240] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 7240] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 37/sock 6376
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 6536] Sat Mar 29 13:42:44 2014
    [Thr 6536] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 6536] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 38/sock 6852
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 18244] Sat Mar 29 13:42:46 2014
    [Thr 18244] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 18244] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 39/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:47 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 32/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    [Thr 17680] Sat Mar 29 13:42:48 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 127.0.0.1:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 127.0.0.1:3300) [nixxi.cpp    3285]
    [Thr 22796] CCMS: closeMonitoringSegment(): inside static JMON Lib: nothing to do.
    [Thr 8780] JLaunchISetState: change state from [Stopping (5)] to [Stopped (6)]
    [Thr 17680] Sat Mar 29 13:42:49 2014
    [Thr 17680] ***LOG Q0I=> NiPConnect2: 192.168.10.62:3300: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3285]
    [Thr 17680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 34/sock 6348
        (SI_ECONN_REFUSE/10061; I4; ST; 192.168.10.62:3300) [nixxi.cpp    3285]
    Heap
    par new generation   reserved 614400K, committed 614400K, used 313963K [0x000000007fff0000, 0x00000000a57f0000, 0x00000000a57f0000)
      eden space 409600K,  60% used [0x000000007fff0000, 0x000000008f028658, 0x0000000098ff0000)
      from space 102400K,  66% used [0x0000000098ff0000, 0x000000009d2528e8, 0x000000009f3f0000)
      to   space 102400K,   0% used [0x000000009f3f0000, 0x000000009f3f0000, 0x00000000a57f0000)
    concurrent mark-sweep generation reserved 1482752K, committed 1482752K, used 0K [0x00000000a57f0000, 0x00000000ffff0000, 0x00000000ffff0000)
    concurrent-mark-sweep perm gen reserved 524288K, committed 524288K, used 70349K [0x00000000ffff0000, 0x000000011fff0000, 0x000000011fff0000)
    [Thr 18896] JLaunchIExitJava: exit hook is called (rc = 0)
    [Thr 18896] JLaunchCloseProgram: good bye (exitcode = 0)
    Regards
    Jose H.

  • SSO and Portal down after upgrade from AS 10.1.2.0.2 to 10.1.2.3

    SSO and Portal is down after upgrade from AS 10.1.2.0.2 to 10.1.2.3. All others are running fine. Any similiar experience and solution?
    Thanks.
    Andy

    cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
    Thanks.
    Andy

  • I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

    After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this? 

    If you have this product,
    http://www.symantec.com/business/support/index?page=content&id=TECH165159
    you have to go back to Snow Leopard.
    To re-install SL, back up your home directory, format and re-install.

  • All bought titles and albums gone after upgrading I Tunes

    Hi Guys,
    unfortunately all my recently bought titles and albums from the I Tunes store are gone after upgrading to 10.7.0.21
    Can somebody please help me?
    Thanks you very much...
    Best regards - Greg

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

Maybe you are looking for

  • External Monitor: Is this even possible?

    I want to color correct using an external monitor. My set up is mini DVI out to VGA to S Video. Everything I've read, people get their video out by firewire to tape deck to monitor. Is my set up possible?

  • Problem with Purchase Order Smartform

    Hi All, I have a problem with SRM PO form. I have 2 PO Layouts 1 is for NA(North America) and 2 is for UK. In config the NA PO is configured for all mediums(Print, Mail And FAX). Using the BADI 'BBP_OUTPUT_CHANGE' I am overwriting config form (NA) wi

  • Php on linux oci8.so  help me

    install 10g R2 ok on fedora5 install apache ok install php5 ok create phpinfo; show oci8.so (ok) but php call oracle ....error install php not run changPerm.sh ----Note: If you are using Oracle 10.2 but not the Express Edition, you must give the "nob

  • EOS Utility & 60D Display Mode?

    When I select Zoom, 2 Display Mode buttons show up in EOS Utility. One is a Camera button which switches to a quality suited to focusing while viewing the camera's LCD monitor. The other is a Computer button which switches to a quality suited to focu

  • Mise a jour iPod iOS 5 connection expiré

    Bonsoir, je possède un iPod touch 4G et je voulais faire la mise a jour de l'iOs 5. Le téléchargement se passait bien mais des la mise a jour iTune m'afficha que la mise a jour a échouer et que la connection du reseau a expirer . Sauf que je n'est au