Mass Transaction for Recipe/Routing

Hi
Is there any transaction for Mass copy of Recipes/Routing from one plant to Other. Instead it is extension of same recipe/routing to other plant.
thanks
Vijay

Dear
We dont have any standard tcode in sap  pp to copy routing in mass.
but if extension is same then u should use BDC or LSMW.
it will hwlp u.
Thanks and Regards

Similar Messages

  • Mass transaction for maintaining cost collector

    Hi experts,
    Is there any mass transaction for maintaining Cost Collector.
    Regards,
    ( Rajneesh Gulati )

    HI,
    You can maintain Product Cost Collector in mass maintanance in following transaction :
    KKF6M Create Multiple Product Cost Collectors for Production Versions
    Enter Plant, No of materials you want to create Product cost collectors enter in multiple selection , enter order type as RM01 which is default for REM and then execute so system will create Product Cost Collectors for all production versions.
    Follow above procedure & revert in case any doubt.
    Regards,
    Tejas

  • MASS transaction for MD09 in SAp4.6c version

    Hello Gurus,
    Is there a mass transaction to get the pegged requiremsnt if the only input that you have is order type and Planned order number in REM scenario
    We have t code MD09 for single planned orders , is there any report for MASS
    THNX
    HKR

    Hi Madhu,
    THNX for info.
    But MF57 is not provifing the desired info
    Edited by: HEMANTH KRISHNA RAI on Nov 16, 2011 9:23 PM

  • MASS transaction for scheduling we need tables & fields

    Hi,
    We have used transaction SM30 and added BUS2013 as used table MASSFUNC with BAPI MASS_CHANGE_SCHED_AGREEMENT
    MASSTAB (table) and MASSFLDLST (for field selected). for the scheduling agreement of Tables and Fields please give us this data.
    Thanks
    Shital

    Hi dear,
    MEMASSSA
    Try this Tcode
    TABLES: massfunc, massname.
    TABLES: masstabs, massfview.

  • Is there a mass transaction for deleting processing locks

    Using trx FPLKDEL will not help, because the locks were not set using FKLOCK2.

    Hi,
    You can also try FPE2M for deleting processing locks at item document level. The limitaion of this code is that the documents should have the same " Due by date".
    You can also do some config if you need specific screnn layout as well.
    Let me know if this helps.
    Regards,
    Lalitha

  • Mass change of Recipe with Change Number for Future

    Hi ,
    I would like to do a Mass change of Recipes with Change Number for Future Plan,
    is there any way I can do that? or Transaction where I can get that info as I have to do it for lot of recipes,
    Regards,
    Paartha

    Rajesha,
    MM12 will get the change Number From CC01, where we define the Change Number for various things Like Mat master, BOM, Document etc,But I would like to Provude the ECN number when ever I change for example MM12(Mat master), CS02(BOM),CA02(ROUTING),C201(RECIPE), every time I can enter the same ECN number obtained from CC01 create change Master,you can see ECN number field on C202 screen also,
    so Now I would like to change Recipes by giving this ECN number for Mass change of one Filed called LAbor Hours inside C201,
    is there any way I can do mass change instead(avoid) of Process ,,,,,,,,, go to  C201 -enter ECN number--go in side change Labor hours for each and every recipe .
    Hope you understood,,, Looking for Reply from you and SDN Gurus
    Regards
    Paartha

  • Mass Change in Recipe management (Transaction RMWB) - change specification

    Hello ALL,
    I am working on a Requirement - Mass Change in Recipe management (Transaction RMWB)
    Requirement - for a given specification number get the list of all recipes where this particular specification is used (this is achieved by standard functionality in RMWB)
    When a particular recipe is changed in a recipe - perform a mass change of specification across all the recipes.
    Things I have found already:
    This has to be done in similar fashion as status change is done using ABAP Class -CL_RCP_MSC_STATUS
    I would appreciate your help and suggestion in this.
    Regards,
    Nikhil

    Hi Beth,
    Yeah actually we did the same thing per your specs: non-status related although confined to preferred recipes, substituting substance X for Y in dependent formulas of recipes.
    The only option right I am aware of currently requires custom ABAP work using the Mass-Change framework supplied. 
    Regards

  • Mass maintenance for router determination config

    In transaction OVLM (Maintain Route Determination), is there a simple way to mass load a single new Shipping condition with generic and multiple transportation groups to all combinations of country of departure/transportation zone and country of destination/transportation zone?
    Thanks in advance for your help.

    We had similar issue and we are uploaded successful with BDC .

  • End User Transaction for Mass Change Sales Orders

    Hello,
    Transaction MASS can be used to change sales orders using object type BUS2032, however, end users are not allowed access to MASS.
    In most other cases, the object types can be accessed by individual transactions, for example, MEMASSPO for BUS2012 and XD99 for KNA1.
    But I cannot seem to find a similar transaction for object type BUS2032, does anyone know whether one exists or how to create such a shortcut.
    Thanks,
    Jake.

    Hi
    See SAP Note 483303 - BUS2032: Only sales orders of category VBAK-VBTYP = 'C'
    Regards
    Eduardo

  • Performance problem for mass transactions after upgrade from 4.7 to ECC6.0

    Hi All,
    After upgrade from 4.7 to ECC 6.0 (IS-U), mass transactions such as FPY1, FPVA, FP04M are taking very long time to complete. for example, before upgrade the jobs sceduled for FPVA transaction take around 5k-6k seconds. Whereas after upgrade the jobs for FPVA with the same variant takes around 9k-10k seconds. I am unable to figure out the cause for exponential increase in the duration of several mass-jobs (after the upgrade). Are there any SAP notes or do we need to do any customizing setting to solve this problem? Does anyone face this kind of problem?
    Thanks in advance
    Taj

    Hi,
    This is normal after upgrade to 6.0, I have faced the same in all upgrades I've done and some others that I have involved also. If you did not requests and going live upgrade check I strongly recomend to schedule an Early Watch Check to minimize the impact. Times won´t be the same but can be very close if the system is tuned well. We have tuned systems that now run with good performance after this services.

  • Mass processing transaction for PP order

    Hi,
    Is there a way to REVOKE the DLFL status in a number of PP orders at a time and then set CLSD status.
    I tried using COHV but it doenst seem to be having that feature.
    Please suggest immediately.
    Rg,
    Vipul

    Hi Ravi,
    You are absolutely right. Siva didnt see my reply at 10:53 hrs before in which I mentionedd the same problem as you have now conveyed.
    I just request people to check the replies and go to the depth of the problem rather that giving repeated solutions. My remarks were not to finger any one here Siva. We all know we are busy and need help from each other in a proper way.
    We are not testing each other knowledge here personally I guess.
    Right, back to my query Ravi thanks for pointing..now can you throw some light as per how to REVOKE and DLFL using any MASS transaction.
    As far as I think COHV or any other transaction cannot be used to REVOKE any other status.
    rg,
    vipul

  • Mass change for QM at operation level in routing

    Dear Experts,
    I have to carry out mass change for Quality Management at operation level in routing. The steps that I am carrying out for an individual record are as follows.
    1.     CA02
    2.     Inspection point 100 is maintained at header level
    3.     Go to operation level
    4.     At operation level work center and control key have been maintained
    5.     Double click on operation
    6.     When I scroll down here I go to Quality Management: Inspection Points view.
    7.     There by default in Insp.pointCompletion system shows the option as u201CQuantity, valuation (production) and radio button selected default indicates u201CQty-relatedu201D
    8.     I want to change these options as only u201CValuationu201D and u201CNo relationu201D respectively
    My queries are,
    1.     Is there any T-code available to carry out these changes in mass?
    2.     Is it possible to do this without any Z development?
    I am doubtful about using LSMW here. I would be highly grateful to you if someone can help me step by step.
    Thanking you,
    Anand Rao

    Hi Sujit,
    Thanks for your reply!
    I tried CWBQM. Unfortunately could not succeed. I think may not be feasible through CWBQM.
    But I came across T-Code CEWB . There I opted "SAP_OPERATION" as working area and it worked. Its quite useful T-Code.
    Thanks again for your input.
    Regards,
    Anand Rao

  • Transaction for Mass Update

    Hi,
    Can anyone List out some Standard SAP transactions that are doing mass update.
    Means Transactions which are updating a range of records in single shot. Instead of doing it one by one.
    I need to create a Mass update for Material. What MM02 do for a single material, I need to do for a range of materials.
    I know some Transactions like XD99, MM17 and MASS. But I need some more names from you.
    Points will be rewarded .
    Regards,
    Paliwal

    hi,
    check these.
    CO44  Mass processing of orders
    F.80  Mass Reversal of Documents
    FOFO  Mass release
    FOVX  Mass Processing of Offers
    IMAM  Mass maintenance of approp.requests
    KE55  Mass Maintenance PrCtr Master Data
    SU10  User Mass Maintenance
    XD99  Customer master mass maintenance
    XK99  Mass maintenance, vendor master.
    <removed by moderator>
    Edited by: Mike Pokraka on Aug 4, 2008 11:26 AM

  • Mass Changes to Rate Routing

    Dear All,
    We were trying to carry out mass changes to Rate Routing,
    by using CA85N we were able to make changes to Normal routing but not rate routing, in CA85N we were able to select only three types of task lists ie N, S & Q. Also checked in CWEB here also only the three types of task lists were provided for selection. Is there any other way for carrying out mass changes to rate rouitng, or settings in the above transactions.
    Regards
    Mithun

    Dear Mithun,
    In my understanding only CEWB can help you to some extent,otherwise you may have to develop some
    BDC's or LSMW's.
    Regards
    Mangalraj.S

  • WBS element updation through MASS transaction

    Hi,
    I am trying to update WBS element in Sales order - Item data (Account Assigmanent Tab) using MASS transactiomn, After executing MASS transaction it is updating the same.
    Can any one help in this??
    Regards,
    Srikanth

    Hi Mr.Srikky,
    I am not sure but try to do the following things
    1) Change the WBS manually and save the order, see whether the system allow you to save the order or not.
    2) If 1st point is ok then might be you are not executing the MASS correctly, Try MASS for any other feild like payment term.
    Please dont mind, I am just looking for possibilities.
    Please also cross check the MRP details of your materials.
    Regards,
    MT

Maybe you are looking for