Mass transport strategy but satellite system is configured for ChaRM

We want that all transports are automatically transported in the development test client.
We have calling a job with program TMS_BCI_START_SERVICE in the satellite system. But this program can only be used for mass transports and does not work when single transports strategy is activated.
Question:
Is there no solution to transport all this transports automatically in development test client via mass transport strategy if satellite system is configured for ChaRM scenario?
Thanks a lot in advance.
Regards Urs

Hello Michele,
Please, check the point 5 in the link below:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this information can help you.
Best Regards,
Diego Fischer

Similar Messages

HT4623 I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what c

I bought this iPhone from a guy and later on he passed away in Syria , after that , I tried to update the soft ware to ISO 7 but the system asked me for the old owner's information which I do not know so could you please advice me on that , what can I do to reactivate the device ?

You cannot reactivate the device without knowing the previous owner's information. This is the new antitheft measure built into the iPhone.
There's nothing you can do. You'll need to purchase a new phone.

I have updated my username and password, but the system keeps asking for my password for an old email for which I have no password.. How can I fix this?

I have updated my username and password, but the system keeps asking for my password for an old email for which I have no password.. How can I fix this?

Are you signed into this old ID ("email") in System Preferences>iCloud, System Preferences>Internet Accounts (Mail,Contacts,Calendars), or in Mail>Accounts, Calendar>Accounts or Contacts>Accounts?

Firefox 5 upgrade results in the following error message presented under details. My system is configure for any type of LAN settings since I only have dail-up connection.

Installation of FireFox 5 after deleting FireFox 3.6v results in the following error message which I cannot resolve or fix. My system is configured with IE 8v and dial-up only.
"FIREFOX BROWSER 4.0v and 5.0v
The proxy server is refusing connections
Firefox is configured to use a proxy server that is refusing connections.
* Check the proxy settings to make sure that they are correct.
* Contact your network administrator to make sure the proxy server is working."

Please try to go to tools, options, advanced, networking, settings, set "no proxy", re-try. More details here: [[options window - advanced panel]].

Direct creation of transports in satellite system after CHARM

Hi All,
I have a quick question:
Can we create new transport requests into satellite system directly, when CHARM is enabled for them. Or the transports can only be created through CHARM?
Appreciate your response..
Regards,
Smita

Hi
It seems you have a problem in understanding the flow
go thru the foll demo files..it will explain you the whole process and ur doubt
Regular corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872582009E/index.htm
Urg corr
https://websmp201.sap-ag.de/~sapidb/011000358700000872612009E/index.htm
Hope prb is solved now
Regards
Prakhar

Satellite Systems - How far back can SolMan 4.0 go ?

Hi,
Can you please let me know the SAP Note which talks about the BASIS Release requirements of Satellite Systems, in order for SolMan 4.0 to be connected to them ?
I came across SAP Note 661949 - Solution Manager Component systems with Basis Release 4.6B which mentions a few facts, but I am still not clear.
In other words, if someone would like to make use of SolMan to connect to very old SAP systems (3.1H or I for instance), is it still feasible? If so, does it go by Scenario of SolMan to be implemented.
Is it a case where, for Implementation Scenario, Basis Release 4.6B is required whereas for Service Desk, it can go lower (?)
Any pointers will be gratefully acknowledged.
Thanks.
Srini

Hi Ruben,
Thanks for your reply. I was already in that section, somehow, this information was not very clear from Config Guides since it differed by Scenario.
It confirms the data I have tried to compile from a Config Guide PDF and SAP Note:
Satellite System's Requirements for Implementation scenario, using SolMan 4.0, as of SP15
Satellite Systems (Basis Release)
4.6C: SAP_BASIS and SAP_ABA: SP 56 (SP 58, if ChaRM is required)
4.6D: SAP_BASIS and SAP_ABA: SP 29 (SP42, -
6.10: SAP_BASIS and SAP_ABA: SP 18 (SP43, -
6.20: SAP_BASIS and SAP_ABA: SP 00 (SP51, -
6.40: SAP_BASIS and SAP_ABA: SP 00 (SP12, -
7.00: SAP_BASIS and SAP_ABA: SP 00 (SP06, -
Also, for those with SolMan SP below 15, SAP Note 907768 mentions a few other SP levels required in Satellite Systems.
Many thanks again.
Best wishes,
Srini

How can I view ipad screen on computer, when I pad display is broken but internal system works

how can I view ipad screen on computer, when I pad display is broken but internal system works

THIS WORKS FOR ME
ON MAIN SCREEN GO INTO VIDEOS THEN SETTINGS ON NEXT SCREEN
SET TV OUT TO EITHER "ASK" OR "ON"
TV SIGNAL SET TO PAL
FIT TO SCREEN SET TO ON
REMAINING SETTINGS TO OFF
CONNECT TO TV SCART OR RED,WHITE YELLOW SOCKETS WITH IPOD/TV LEAD AND AWAY YOU GO.

Apple ID enter in, but the system ask for the itunes support?

Everything I already done, but the system ask me for the itunes support?

Click here and ask the iTunes Store staff for assistance.
(104855)

How to configure TMS for ChaRM with Customizing routes?

Hi Experts,
We have succesfully configured three system landscape TMS for ChaRM for several pipelines already. Now we are facing a situation where TMS is as follows:
DEV to QAS contains routes:
Customizing: ZEBP => 100
Transport: ZDEV => 100
Customizing: ZSUS => 200
Transport: SAP => 100
The question with these is how to add ZEBP and ZSUS to ChaRM configuration?
QAS to PRD:
Delivery: 200 => 200
Delivery: 100 => 100
Here the question is how to enable transports between 200s alongside 100?
When looking at SMSY in SolMan, SUS is a logical system only.
Has anyone of you come across a situation like this? I'm glad for any hints you may give me!
Our SolMan is 4.0 SP13.
Best Regards,
Auli

Hi
in my opinion you can configure it the following way:
Customizing: ZEBP => 100
Transport: ZEBP => 100 (not ZDEV)
Customizing: ZSUS => 200
Transport: SAP => 100
Then assign ZEBP as default transport layer for client 100 and ZSUS for client 200.
It is not possible to configure ZEBP and ZDEV for client 100 if you want to use charm
regards, Andy

Re: BulletinBoard and configuration for Touchpad

Win7 x64
L505-10M
There ware all sorts of problems after a windows security update a few months ago for this system.
I have to put a backup of C:\ back, but various functions did not work .
I have most of them work again now. I installed Flashcard again but Bulletin Board and configuration for Touch pad are missing yet.
Mouse drivers are HID-mouse and PS/2 version: 6.1.7600.16385 of Microsoft.
I downloaded Touch Path Driver-20091202155841.zip but this cannot be installed.
C: \Program Line\TOSHIBA\Bulletin Board is present but probable damaged and not present in Windows Start-menu\Toshiba.
How can I repair this?
arnold12

I understand you that recovery installation is your last step and possibility.
What kind of backup do you have? How have you created this backup?
Obviously you have problems with typical Toshiba stuff so I dont understand what kind of backup do you use. Was your preinstalled OS screwed up and you try to install back up.
Anyway, bulletin board try to check Toshiba download page and install ReelTime for your notebook model, if it is offered.
What is wrong with touch pad driver? Why you cannot install it? Can you see some error message?
Have you tried to install both offered touchpad drivers? Which one cannot be installed?

Fi configuration for cin

Hi All
I have an interview tomorrow on SAP CIN.
I am into SAP FI......
I have configuration steps for CIN.
But I want CIN configuration for module wise Like.....FI, MM, SD
Especially Configuration for FI in CIN
What a FI Consultant do configuration for CIN
What a MM consultant do configuration for CIN
What a SD consultant do configuration for CIN.
How we draw the statements in FI after cin implementation. Where it is linked with MM & SD for purchase & sale transactions.
Please share your ideas which can help me out to have successive interview tomorrow.
Thanks
Likitha
Moderator: Please, respect SDN rules. Prepare for the interview by reading and comprehending SAP material which is available on the Web

Dear Raghav,
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/cin+configuration&
Regards,
Naveen.

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

Best configuration for Transport System

Hi everyone
I like to know what is the best way to configure my transport system.
We have 2 server QAS and PRD in two distinct machines. SERVERQAS and SERVERPRD, accessible from network.
We need what when all transport request from QAS when released, all files must be copied to PRD server, today we need to use the button to adjust queue, but we can't use this option, we need what this process is automatic.
Thks.

Hello Emerson,
You don't have Development system?
In a standard 3 system landscape, if dev, qua and prod systems are assigned with single domain controller and sharing same /usr/sap/trans then as soon as request is released from dev system, that will be available in qua buffer/import queue. Once it's successfully imported into qua system then it will be available in prod buffer/import queue for import. This is controlled by transport route.
Please read TMS configuration guide and take necessary actions.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a0137acc11d1899e0000e829fbbd/content.htm
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctstms/bcctstms.pdf
Thanks,
Siva Kumar

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Mass transport strategy but satellite system is configured for ChaRM

Similar Messages

Maybe you are looking for