Mass update of BUT000-Z field, but can't use FM BAPI_BUPA_CENTRAL_CHANGE

After a data load we have realised that one of the Z fields has not been populated with data and so as a result of this I am attempting to write a quick program to update this Z field. The field is located in table BUT000, but of course I need to update this using the appropriate FM rather than direct table update.
There seems to be a few' BUT000' FM's and a number of 'CRM_BUPACHANGE' FM's as well. Has anyone used an FM for such an update before?. I think I need to identify the best FM for the job.
I have also looked at FM BAPI_BUPA_CENTRAL_CHANGE as well, but that does NOT contain the Z field to change.
With regards
J Sapora

Hi Markus,
I agree with you, but MASS is something very straight forward, plus, don't support paralelization, so if you want to change a smalll amout of data or you really don't care about performance (I mean for the process is the same if the update takes 1 or 4 hours) and the changes doesn't imply a business logic, the user has all the control of which fileds should be changed and for which value, then it's a good option.
But when extra logic is needed, Mass can become a nightmare, I will write a blog about this if I have the time.
Cheers!
Luis

Similar Messages

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?

I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
 DALE

Updated to version 4.01 but can't use personas because it is 3.0x

tried to install a persona which requires 3.6 and it tells me i am running 3.0x when actually running 4.01

You obviously have a problem with your user agent string which is showing Fx 3.0.10. There seems to be a bit of a rash of this problem.
Not my field but I'm sure someone will pass by with the appropriate fix.
Just to be sure - check your version -
*Firefox button (or Help)>About Firefox, or
* Options >Advanced>Show Update History(little box at the bottom). This is Fx4.0.1 on Win 7 but it should be the same on Vista.

I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

I am using iPhoto '09 Version 8.1.2 but can not use iCloud with it. I've looked for updates in iPhoto and iLife'11 but no luck. Suggestions very welcome.

No you won't necessarily lose your photos when upgrading but it's very very unwise not to back up first. Backing up is like using a seat belt in a car. You can drive without one for years and have no issues, but if you do have a problem the outcome will be a lot worse. So, too, with back ups. And upgrading is one of those times when the risks of a problem are higher.
Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store

HT5137 I have just updated my iphone to IOS but can't close apps I used to send them into wiggle then close but with IOS they don't wiggle they just open up again ......HELP

I have just updated my iphone to IOS but can't close the apps I have open, I used to send them into wiggle mode then close but now I have updated they won't wiggle they just open up again................HELP

shartez wrote:
.. can't close the apps ...
How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211

I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

I got an update message for iOS 7 but can't download as it keeps shutting down and the wheel goes so slow that you can hardly see it moving and says it will take 5-6 hours to download approx. 64 megabytes

Which way are you trying to update - iTunes or WiFi in the iPad settings? Try switching from one method to the other method. If you don't have a computer and need to use WiFi, try closing all apps and then reboot your iPad and try again.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of all of the apps in the recents tray. Tap the home button or anywhere above the task bar when you are done.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
It wouldn't hurt to reboot your router either by unplugging it from power for about 30 seconds, plug it back in, let it fully start up and then try to update again.

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

Since i updated to 36.0 version i can't use videohunter any more

Since i updated to 36.0 version i can't use any video download add-on.
To download a video i have to close FF - reopen it - and click on cancel video.
Than the video starts to download.
Very strange, before it worked perfect .
Used Videohunter.
Tried out other video downloaders, but they have the same problem.
Please help me
Thank you

Yes, something changed in Firefox 36 that is affecting video downloaders, but I haven't researched it.
A new version of Video DownloadHelper is available for testing from this discussion page, if you want to give it a try:
https://groups.google.com/forum/#!forum/video-downloadhelper-5

Is there a limit to no. of summary fields that can be used in a cross tab?

Hi,
While creating a cross tab is there a limitation to number of summarized fields that can be used?
- The cross tab when uses 184 fields as summary fields leads to Crystal report application to crash at the time of export to excel.
- Tried with two Datasources: XML and excel
- If we reduce the number of summary fields used to 102 exactly, export works fine in excel.
- If 2 cross tabs are used each containing 92 summary fields(in order to show 184) export to excel works fine.
Please let me know if there is any such limitation which leads to CR application to crash when exporting in excel?
Thanks
Regards,
Nidhi

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728
If this is a bug you'll get a refund, if not post your enhancement request in the Idea Place. Or the Rep will suggest a better way to create your report.

Hi, I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop. Thanks

Hi,
I have apple account/password on laptop but can't use the same ID etc on new Ipad. On my account it says ID is only for 1 system. I really want only one ID for both Ipad and laptop.
Thanks

It seems that you have used the AppleIDs to "Purchase" your devices, which marries the two for all time and eternity.
For info - Using your Apple ID for Apple services
For Account security issues - Apple ID: Contacting Apple for help with Apple ID account security
regards
CCC

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? photosmart cant see the iMac.

I cant seem to scan from my hp photosmart 7520 printer to my iMac but can scan using the iMac? Photosmart cant see the iMac. Mac is wired to the router printer over wi fi.

Hi Shlomi
It worked!!! Thanks so much, I've been messing about with this for hours.
As you are so good I do have another problem. I have another 2 pc's on the network that show on the iMac but iMac cannot conect to. One is XP and the other is Vista both with Norton fire wall installed.
Any thoughts you have would be much appriciated
Rob

I want an iPhone 3gs as I currently have a nokia lumia 620 but can I use my micro sim in the 3gs

Hi i want an iPhone 3gs but can i use my micro sim or do i need a sim adapter? answer soon

The iPhone 3GS takes a standard full-size SIM. It's possible that an adapter will work, but it will probably be more reliable if you get a full-size SIM from yur cell carrier.
EDIT: I concur with Tim. The 3GS is a very old model now, as smartphones go, so I would suggest a newer model, saving up if you have to. I myself wouldn't buy anything older than an iPhone 4S at this point.
Regards.

Installing but can't use the css

I bought the P'shop CS6 at the Apple store, as well as my imac but ,even though I've regeistered with Adobe and have Reader, I'm not told how to get the program onto my compter. I'd appreciate any help. John

jrock wrote:
Hi. i didn't mention 'css'.
It's the subject heading of this thread which confused us: "installing but can't use the css". I suspect "css" is a typo and you meant CS6.
CS6 can be downloaded from
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Enter your serial number to license the software on your iMac.

Installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature. It's been completely removed. Need it back. Please help..

I installed both 10.1.4 and 11.0.08 updates this week and now I can't use the Digital "Sign" document feature. It's been completely removed. Need it back. Please help.. Can't sign or add text to any pdf document. Even when security properties allow it.

I would remove Reader and repair or reinstall Acrobat.
Having different major versions can cause some users issues. Reader is not necessary if one has Acrobat installed. Even though Adobe has improved the capability of having both Reader and Acrobat with the same major version level there are still user configurations that have problems with this setup.

Mass update of BUT000-Z field, but can't use FM BAPI_BUPA_CENTRAL_CHANGE

Similar Messages

Maybe you are looking for