Mass update of condition type in the sales order

Dear Experts,
we have to do mass update of one condition type for already existing sales orders with out causing any changes to the manual conditions and also for other automatically determined conditions.
The condition type for which we have to update in sales orders is included in the pricing procedure very recently.
Please guide me in this regard.
Thanks and Regards
Yoganand Pingili

Yoganand Pingili
Goto T code VA05 enter your criteria for sales orders selection.
Next screen. Select all sales order you want to change price.
Menu>EDIT>Mass change>New Pricing>select 'C'.
This will solve your problem
try and revert
Edited by: Yadav on Oct 9, 2009 8:25 AM

Similar Messages

  • How to give the header condition type in the Sales Order for freight?

    Hi,
         We are creating Sales Order(SO) using FM 'CRMXIF_ORDER_SAVE'.And we are unable to track the FREIGHT condition type in the above FM to pass value.
         We want to check this value in CRMD_ORDER tcode.
        Pls let us know how to make it possible of the above issue.
    Thanks,
    Siva..

    Siva,
       I guess you posted in Wrong Thread. You need to post in WAS section.
       check for any BAPI's available in CRM.
    Nagesh Ganisetti.

  • Double or more same condition type on the sales order item view

    Dear expert,
    We have two condition type for the material price.
    PR00 : For automatically pricing from material price list. (For example : 50 EUR)
    ZAD6 : For manually price enter by user (For example : 100 EUR)
    When I enter to ZAD6, last price is available on the net value. (100 EUR).
    But when I enter second time to ZAD6 (For example : 150 EUR), in this case all ZAD6 lines are adding to detail's of item condition view. I shown below:
    Condirion view example :
    Line1 : PR00        50   EUR
    Line2 : ZAD6     100   EUR
    Line3 : ZAD6     150   EUR
    Net value : 150 EUR
    My problem is:
    At the result, item net value is true, but when I look Item overview I saw first manually enter's price (100 EUR)
    I shown below:
    CnType: ZAD6    Amount : 100 EUR   Net price : 150 EUR
    Thank you !
    Gülay Çelik
    Siemens TR

    This has been discussed many times in the forum.  Please search before posting.
    Please note that if both the condition types has a Condition Class as B (Prices) only one pricing condition in the lowest level ( step number ) will be active and rest are made inactive by the system. This is a standard behavior.  So If you have two, you may need to change the first one to be a discount or surcharge in V/06
    thanks
    G. Lakshmipathi

  • SERVICE ORDER COST IS NOT FLOWING TO CONDITION TYPE EK01 IN SALES ORDER

    hi all,
    My requirement is that the cost incurred in service order should flow to the condition type ek01.
    we will be running the transaction dp90 to calculate the cost for the resources used.
    the cost are getting calculated at service order level but this cost are not flowing to the billing item being generated from dp90 in the billing request.
    the settings that i have made are as follows: I have maintained the condition type ek01in the sales pricing procedure. are there any other settings required by me to make.
    valuable answers will be be rewarded fullpoints.
    regards,
    ashish

    Hi prince
    Check out in Control data of Condition Type--PB00..Enter "NO Limitations" in Manual Entries. and check the 'Amout' and 'Value' and 'Delete' so that u can make changes to that condition type in line item in sales order.

  • How I can get the Billing Type for the sales order and its items

    How I can get the Billing Type for the sales order and its items. I mean from which SAP tables and how?

    Hi,
    You need to use two tables.
    First use VBFA. Enter the sales order number in the field Predecessar and the value M in SubCt field. This will give all the billing document number for the sales order items.
    Then use the billing document numbers in table VBRK, where in you can get the billing document type.
    Regards,

  • How to update cost related condition type amount in sales order without disturbing other condition types.

    Hi ,
    How to updae only one item condition  ZYV0 value in sales order. If I can see we have several options from pricing type to update condition types but here My requirement is to update only one condition amount .If I can see other pticing types they will update all condition types .
    -Exclusive option is checked for all the tables maintained in access sequence,
    Below options were not worked for me.
    -In condition type ----> Condition category has been updated with "D"(Tax) pricing type-"G" to update in sales order
    - This option worked for me but  condition category  "F"(frieght) and pricing type -H but in conditions tab when I update two condition amounts are activated for one condition type like below.
    ZYV0--30 % (old condition record value updated in sales order)
    ZYV0- 50% (updated condition record)
    Regards

    Hi Rita,
    Tried with condition category "u" and updated with pricing type "U" . It works as same I used old logic.
    with condition categories "D" and "F" it will update old and new condition record values in sales order.
    ZYV0--30 % (old condition record value updated in sales order)
    ZYV0- 50% (updated condition record)
    I have updated  here existing condition record value from 30 % to 50 % validity periods are not changed.
    Regards

  • How to update the condition price in the sales order for all the items

    Hi,
    How to update the condition price for all the itmes in the sales order to carry out the new price automatically through a stand alone program, for all the orders in the billing due list table?
    Thanks,
    Balaram

    Hi,
    There is a change in the requirement.
    Scenario:
    I have created a sales order with some 4 condition types, in that 2 condition types are of class A & B and the other two is of class C. Here I need to update the condition price of class A & B only and the remaining condition types should not get update even though there is an updated price is available.
    For the above scenario, I need to write a standalone program. Do we have any function modules to update the price of the single condition in the sales order? Please tell me how we can update the sales order at item condition level.
    Thanks.
    Balaram

  • Mass Update custom condition types using LSMW

    Hi Members,
    Our client has created some custom Condition types for Discount/Surcharges , which they included in info records. Now, I am developing a LSMW which Updates/Creates inforecords. But, it was unable to create or change the custom condition types, as there is no access sequence for these custom ones. The standard SAP documentation confirms the same, access sequence not required. Even transactions like  MEKP/MEK2 are also unable to change the condition record data. Is there anyway, I can change the condition records data in SAP, except manual updation
    -Thanks!
    Edited by: Tirumala Nalla on Jul 30, 2009 7:32 AM

    Hi  Greetson,
                I have tested BAPI_SALESORDER_CHANGE ,that is also not deleting the header condition types.  If you see the code for BAPI_SALESORDER_CHANGE,it calls only SD_SALESDOCUMENT_CHANGE .I could not able to delete the header condition type that.It didnt say any error message or success message for condition types.It just says Order Header processed successfully and item processed successfully.Can you tell me what i am missing .
    Regards,
    Vigneswaran S

  • Defaulting Condition types in a Sales Order Condition Tab

    Hi Experts,
    How to default the condition types PR00 , KF00 and MWST in Sales Order condition tab?
    (manual conditions and with out access sequences) so that we can map the prices from other system to the corresponding fields of KONV in Condition Tab.
    I searched in the forums and then I am posting this request.
    Thank you
    Ravi

    Hi Ravi
    If you want to default the condition types PR00 , KF00 and MWST in Sales Order condition tab without maintaining access sequence then in V/06 for PR00 , KF00 and MWST condition types maintain the option Manual entry is possible , but in your pricing procedure check the boxes Required. So that when you create sales order and when you dont maintain the PR00 , KF00 and MWST condition types system will give an error
    Regards
    Srinath

  • Flow of condition records in the sale order

    Dear All,
    I had created two condition types (ex : RL1 & RL2) for Royalty exp and Royalty Payable, these are Required Fields. so that whenever user create the Sale order those condition types amounts are automatically fetch into the sale Order with plant and material combination through condition record.
                                        But the requirement is user will maintain condition record for the first condition type (ex : RL1) only, at the time of creating the Sale order the second condition type(RL2)  amount should automatically  flow into the sale order along with the first condition record (RL1). i.e., what ever the amount maintained in the first condition record(RL1) should copy into the second condition type(RL2).
    Note : User will not maintain condition record for the Condition type (RL2).
                                 Other than Condition supplement, Please suggest me how to meet the Client requirement.
    Awaiting Reply,
    Thanks&Regards,
    Lakshmi

    Hi,
    First Condition Type (RL1) is a surcharge  and   Condition type (RL2) is discount.  after placing RL1 condition in RL2 condition element details screen as a Ref.Condition Type. I maintained the condition record for RL1, in the Sales order second condition Type is automatically picking with positive value(where as second condition RL2 is a discount) that should not it has to show the negative value .
    Give me suggestions to meet the requirement.
    Regards,
    Lakshmi narayana

  • How to prevent consecutive entries of same condition type in a sales order

    Hi,
    My client is using manual condition type for the basic price "ZBPR". Now system allowing multiple entry against this condition type in the pricing screen during order creation i.e in the first line if we put Condition Type "ZBPR" and putting some value as amount, then again if I put "ZBPR" as condition type and give some other value as amount then system is allowing this and doing all the subsequent calculation.This is not acceptable by the client.
       The functional person regarding this is saying this can be done by using routine.Can some body tell me which routine should I take for this if that is possible by routine and the required code.Also say if there is other way to solve this.
    Thanks,
    Manas.

    Hi ,
    u can do it thru VOFM(tcode)--->Menu -> Formulas>condition value , but in this case u need to derive the value of this condition type by using ur own logic.
    Re: vofm-routine
    Regards
    prabhu

  • Multiple output condition type in same sales order.

    08.10.2007
    Hi friends,
    I have used two output condition types in my output determination procedure for printing. The problem is in the document by default only one condition type appears, if the user needs to use the alternative condition type this has to be typed in manually.
    Any solution for both the condition to appear in the output screen by default so that the user has the option to select either of the two  required output type.
    Thanks in advance.
    Udaynath.

    Hi Krishnan,
    1) Check if you have any requirement routine assigned to the condition type in the output determination procedure.
    2) Ensure the manual only option is not checked in the output determination procedure
    3) Maintain the condition records [VV11].
    Regards
    Nadarajah Pratheb

  • Tax condition types issue in sales order

    Hi Friends,
    I am bit lost with the following issue. I have searched sdn and other SAP forums for this. There were similar issues discussed but they didnu2019t solve my issue. There was exactly similar issue but it was unanswered. So I am posting the issue here to get some inputs.
    This is the Indian tax scenario.  I have configured pricing procedure where I have JVAT and JCST. If the company is selling to customer in the same state where company is located letu2019s say region 05 JCST 2% applicable. If the customer is outside region 05 then 5% JVAT should applicable.
    =>  In the pricing procedure it was like
    150  0  JVAT
    160  0  JCST
    Both will be calculate on the gross value.
    =>  I have created two new tax classifications for customer master. 
    JCST   2   Tax liable outside region 05
    JVAT  3    Tax liable inside region 05
    So in the customer master I have both JCST and JVAT. I have created a customer with region 05 and in customer master under Billing document tab I have entries like below
    Country    Name   Tax Category   Name   Tax classification  Description
    IN              India        JCST                IN: CST              2                  Tax liable outside region 05
    IN              India        JVAT               IN: VAT              0                  Tax Exempt
    => I have created condition record for JCST with the following key combination
    Country u2013 IN
    Region of dlv. Plant u2013 05
    Region u2013 05
    TaxClass1-Cust.  -- 2
    TaxCl.Mat u2013 1
    Amount u2013 2 percentage
    Tax code u2013 A1 (TAXINN A1 2% Output tax)
    =>  With the above condition records maintained for JCST and maintaining tax classification as 2 for JCST and 0 for JVAT, I assume in Sales order SAP should calculate tax JCST 2 percentage. But in sales order SAP is not considering JCST and JVAT. For JVAT it makes sense as it does not have condition records. But I didnu2019t get the reason for not getting JCST.  When I checked analysis and click on JCST condition type it says condition record is missing.  Surprisingly when I click on the access details it shows u201CTaxClass1-Cust. as 0u201D it didnu2019t show as 2 as maintained in the customer master.
    When I change the Tax classification for JVAT from 0 to 1 or from 0 to 3 in the customer master, in the analysis when I click on access details for JCST it shows tax classification maintained for JVAT that is as 1 or 3  so it seems SAP is not considering JCST in customer master at all. Why is that so?
    The access (condition table) for JCST and JVAT are same.
    Any inputs?

    Hai SAP_2006,
    We are also having similar requirement and inform the USER to maintain
    In our customer master we gave like
    Customer master:
    Sales area data
    Billing documents
    JTX1     Tax Jurisdict.Code d     1     Full Tax 12.5%
    JTX2     Tax Jurisdict.Code d     1     Full Tax 12.5%
    JTX3     Tax Jurisdict.Code d     1     Full Tax 12.5%
    JTX4     Tax Jurisdict.Code d     1     Full Tax 12.5%
    To get LST  we maintain
    Country u2013 IN
    Region of dlv. Plant u2013 05
    Region u2013 05
    TaxClass1-Cust. -- 1
    TaxCl.Mat u2013 1
    Amount u2013 12.5  percentage
    Tax code u2013 A2 (TAXINN A1 12.5% Output tax)
    To get CST
    Country u2013 IN
    Region of dlv. Plant u2013 05
    Region u2013 06
    TaxClass1-Cust. -- 1
    TaxCl.Mat u2013 1
    Amount u2013 12.5 percentage
    Tax code u2013 A2 (TAXINN A2 12.5% Output tax)
    In case if they want CST 2%, then user has to go
    Sales order header Biiling
    Alt tax Classification : Shouls change the Blank to 2 in the 1 box out of 4.
    for that we maintained condition record as
    Country u2013 IN
    Region of dlv. Plant u2013 05
    Region u2013 06
    TaxClass1-Cust. -- 2
    TaxCl.Mat u2013 1
    Amount u2013 12.5 percentage
    Tax code u2013 A3 (TAXINN A3 2% Output tax)
    This doesn't require to change customer master regularly and default system finds LST or CST 12.5 unless they change to 2% system will not change automatic. So CST 2% Vs CSTfull tax risk is also avoided.
    Regards,
    Mani

  • Condition type missing in Sales order after client copy

    Hi All,
    I am technical person and looking for administration part. I did client copy from my Prod to Dev sytem by using export import method. After doing this I am able to view all sales orders but the condition types in pricing element table are missing in Dev client, but the in same sales order in prod, the contion types are exist.
    My functional consultant saying its because of client copy but as per my knowledge the client copy has special query to copy the content so this could be side effect of the cleint copy.
    Can anybody experienced the same problem before. If yes. please provide me the solution.
    Regards,
    Ramesh.

    Dear Ramesh,
                         I checked the note,as i said certain tables which is copied might not be available in the dev.As staed in the note also they are pointing on the access sequence.Say for example one condition type you copied from PRD will have an *** seq.But the same *** seq will be in a different order in DEV.As this tables and feilds are client independent.So ask your functional consultant to check that.
    As i told you we have faced the same issue but in a different area.Then when i changed the seq it worked.
    Please check and revert.
    Venugopal

  • Mass updation of Priority field in the process order header screen

    Hi Friends,
    Can any body knows on how to do mass update the Priority field in the process orders after release.(with out upload using BDC).
    or can we update the priority field in process order during mass release of process orders using  T- code: COHVPI?
    Is there any standard transaction? else please tell me the solution if there is any other way of doing this task.
    thanks&regards,
    Purna

    Purnachander,
    Your requirement can not be fullfilled with any standard transaction.
    BDC is best suitable option.
    Hope this helps you.
    SmanS

Maybe you are looking for