Mass update of Outbound Receiver port in we20 - Customer

We want to change the Customer receiver port from a Transactional RFC to a File port. We have over 300 customers to change.
Can this be done in another way than manually updating one record at a time?
I tried using SCAT but could not get it to accept the Customer number as an input. I might have used it wrong, can scat be used to mass change the Customer port?
Any suggestions in this regard is appreciated.
liezel venter

The requested delivery date can be changed using Mass Maintenance (t/c MASS). The business object is BUS2032 for Sales Order but don't see any for Delivery mass update.
Alternatively
1) Extract all the document no's to be changed
2) Run LSMW and record a script, prepare the template
3) Fill in the template , create a flat file and run it in the system

Similar Messages

Mass update of Outbound Deliveries

Hi Guys
Simple question
Does anybody know of a transaction where I can change the 'Actual' delivery date in Outbound Deliveries on Mass
Regards
Frenchy

The requested delivery date can be changed using Mass Maintenance (t/c MASS). The business object is BUS2032 for Sales Order but don't see any for Delivery mass update.
Alternatively
1) Extract all the document no's to be changed
2) Run LSMW and record a script, prepare the template
3) Fill in the template , create a flat file and run it in the system

BD64 - generate partner profile - outbound parameter; wrong receiver port

Hi all,
I'm using a distribution model (transaction BD64) for creating partner profiles in my system.
This works fine, exept for one thing.
The receiver port used in the outbound parameter is wrong.
It's using the tRFC port of the destination system instead of the tRFC port of the SAP XI/PI system.
If I send an Idoc it's now going directly to the destination system instead of going to XI/PI first.
I could modify this manually (which is a lot of work), but I would like to know how SAP determines which tRFC port is used when generating the partner profile and creating the outbound parameters.
Can anybody help me with this?
Reagrds,
Roy

Hi,
According to my knowledge, if you have a receiving logical system name is same as the RFC destination name, then the SAP will take the RFC destination properly and will generate the port automatically (for Ex: if you have a port A00..12 then it will create a port A..13). the generated port will be used in partner profile.
Or
Give a try by assign the RFC destination (The receiving logical system name and RFC destination name should be same) for a port and use it while generating the partner profile by using BD64 or SALE.
Regards,
Venu V

Field BSEG-MANST. does not exist in the screen SAPMF05L 0301 in mass update

Hi,
I am trying to perform a mass update of dunning data (level and date) on some open items. Using the mass change function through FBL5N, I receive the error message, and the update is not performed. I cheched with the layout editor, but the fields appears in the mentioned screen. The field is also allowed for modification in customizing, for the company code. I was not able to find the dunning fields in the field status editor, in customizing.
Any hint?
Thanks
Massimo

thanks, but it doesn't apply.
More relevant is note 322163 Line items: mass change 'Payment Method' BSEG-ZLSCH, but this refer to a program error, our release is more recent, and, furthermore, the dunning fields aren't available for change in FB02.
Regards, Massimo

EDI: Receiver port in control record is invalid

Yesterday, we got refreshed out quality system with the production SAP system.
I am trying to process IDoc # QXXXXXXX in quality but I am getting the following error message:
EDI: Receiver port in control record is invalid.
To create this IDoc, I copied IDoc # PXXXXXXX using WE19 and modified certain fields so that it would change the clearance status. The IDoc I used to copy from was from production server and a part of the recent refresh of Production serveru2026
could that be the reason that the EDI Receiver port is invalid or is there another reason?
THANKS IN ADVANCE.

Hi sam kumar
Ports and Partner Profile may be Same or Different in Quality and Production systems.- it is Client dependent
U can cross check Ports using WE21 with Quality system and production systems
U can cross check Partner Profile using WE20 with Quality system and production systems
if both are not same u need maintain port and partner profiel before creating idoc using we19...
Note: Keep a note on Logical system also..
I hope this help for all when system refreshs,.
Ramesh

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

Mass Update Purchase Order Price

Dear folks,
I have a bunch of purchase orders already created in the system. However, I received notification that there is a price increase in most of the products in the purchase orders.
How do I mass update the prices in the purchase orders?
I already updated the info records.
Best Regards
Junwen

Hi Piyush,
Thank you.
I am looking for some functionality that can let me update the prices in the PO with the latest prices from the info records.
Something to the effect of the mass pricing update function in VA05.
Is there anything like that in MM?
Best Regards
Junwen

Mass deletion of Outbound deleveries

Hi
Can any one pls let me know if theres any transaction for mass deletion of Outbound deliveries? We have some 600 OBDs to be deleted. Jus want to know if theres any such trxn or we need to create a BDC prog for that?
Thanks!
BR,
Sri..

Hi
there is no process of deleting deliveries in Mass. If it is a one time activiity you can record a transaction VL02N for delete delivery. Download the same to excel and update all your deliveries and upload the file and run the recording. This will delete everything in back ground.
You need to create a file something like this for all deliveries in one file with this recording.
     0000     T     VL02N
SAPMV50A     4004     X
     0000          BDC_CURSOR     LIKP-VBELN
     0000          BDC_OKCODE     /00
     0000          LIKP-VBELN     82212977
SAPMV50A     1000     X
     0000          BDC_OKCODE     /ELOES_T
If it is a permenent thing then you have to go for a BDC program.
Regards
Yatin Thakkar

Inbound IDOC receiver port not getting filled in

Hi All,
I checked the WE20 configuration and it is fine. Just wanted to check if there is any other sap configuration which might be missing.
The IDOC is coming from a web server and they confirmed that they are filling the receiver port information while sending, but in the IDOC that we receive in SAP the receiver port is coming as blank.
Any pointers will be appreciated.
Thanks,
Anil

Hello Anil,
When they say they are filling receiver port that means they filling EDIDC-RCVPRT, please note with out receiver port you will not be able to receive the Idoc.
It means this value might be cleared somewhere in SAP. may be user exit or BADI or enhancement. what you can do is try to create inbound idocs by populating receiver port using WE19 and check whether the created idoc contains this value or not.By doing the you can get an idea where this value is disappered.

Can't browse web (outbound HTTP port 80) using wired Ethernet

I just purchased a new 20" Core 2 Duo iMac today (Leopard installed) and I'm seeing a very strange problem: I can't browse the web using a wired Ethernet connection. Here are the specifics:
- When I set up wireless ethernet w/ Airport, it works fine (outbound port 80 access is successful)
- Going back to wired ethernet, when I pop down into a shell, I notice that outbound FTP (port 25), outbound SSH on port 15554 works fine. When I run curl (text-based web browser), it hangs. This tells me that its only port 80 that's giving me problems and nothing else. The network connection in general is fine.
This tells me the following:
- wireless ethernet is working fine
- wired ethernet mostly works - all outbound TCP ports that I've tested work great. Its just the HTTP/Web port 80 that seems to be blocked.
I went into the Security area and under Firewalls, it appears that the default configuration is set up to allow just about anything out and in.
This is so bizzare - I thing as far as networking goes, the web access is the most important one, so I can't see Apple disabling this somehow. What gives??
Earlier, I had set up a few user accounts for the rest of the family and set up Parental Controls on my two kids accounts. When I started noticing the outbound web access issues, I even went as far as deleting all the accounts to try to return the system as close as possible to how i received it.
Anyone have any ideas why my outbound web access is blocked?
Thanks,
Ben

I am not sure what the fix is but let me give it a try here for you. (Making sure edit works with questions 1,2,3)
1. What version of ColdFusion Builder are you running. Are you sure you are running Beta 3?
2. Can you access these files from your explorer window?
3. Are you using RDS to connect to these files or the file system? (should be able to do both but that might be helpful to know which is failing.)
4. Now the final question... by browse you might have a different issue. What version of CF server are you running? This might not be the issue but again could be if you are running developer version. If not an issue let me know and will try to hook up with you via connect to do an online screen share and help you out here.

Mass Update Column In Tabular Form

Hi,
I'm trying to create a tabular form that has a mass update column function. i.e. the tabular form will be displayed as normal but at the top of certain columns will be a text box or lov and what ever is entered into those boxes will be cascaded into the empty values in that column without refreshing the page.
Hope that makes sense.
I've search the forum but cant find reference, is this possible.
Thanks Andy

Hi,
Just wondering if anyone had any thoughts on this.
I can get the text to populate another cell e.g.
http://mlw-mis-2/dev/apex/f?p=174:4
But how can i get it to reference a column, this is what I'm using to reference another item
onKeyUp="f_getTextUpper('P4_COL1','P4_TEXT')"
and I've tried changing the P4_TEXT to other things like
apex_application.g_f03 (vRow)
apex_application.g_f03 (i)
apex_application.g_f03
But with no luck

Mass update of a custom field at Product Revenue level

We are trying to update a custom field at Product Revenue level using the Opportunity Web Service. The webservice call is timing out as we have thousands of Opportunities.
I would appreciate if anybody gives input on how we can massively update a custom field using Opportunity Web Service.
OR
Is there a way to mass update a custom field at Product Revenue level other than using a web service.
Thanks for your help!
-purna

If you are not very much obsessed with Webservices, the other workaround is the Data Loader Tool. It was discussed earlier in this forum.
Pl refer-
Re: Product Revebue Updation
Hope this helps.
Rgds,
Amit Sahu

I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand. Can I fix this problem?

I have my daughters Ipod, my iphone, my wife's Iphone and Ipad on the one Apple ID. Since the latest update we are receiving Imessages from our daughter's Ipod with my wife's caller ID on the one message strand.
Is it possible to differentiate between all the devices?Can I fix this problem?

I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

Is there a way to mass update or replace the SPM Firefighter IDs table?

We are upgrading from GRC 5.2 to 5.3. In 5.3 FF/SPM has added an Owners field to the FF ID table (/virsa/zffusers), which is apparently a required field because I keep getting a "Invalid Firefighter ID Owner" error when I try to look at the table.
Is there a way to mass update, or perhaps import/replace, this table? I am having problems trying to update this table thru the FF table screen. When I go to save my changes, it will return the above error because not all of the FFID records have an assignment in this new Owners field. We have over 160 FFIDs, so I can't change all of the records at the same time. I can only get about 20 per screen and it will return that error again when I try to page forward.
Thanks.

Hi Bob,
that is perfectly possible - did it a few times already.
Export the table from within Firefighter, download the owners table (sorry, need to look up the name tomorrow - but you can't miss it), then add the owners through an Excel vlookup. Then re-import the table in Firefighter, and you're ste.
I'm at home right now - if you have difficulties getting this done shoot me a message tomorrow and I'll send you more details.
Frank.

Error Propagation on a 2 way receive port

HI,
we have a 2 way receive port . The subscribing send port makes a web service call to a third party and the received response
goes back to the client via the received port.
All good if things are working! In case of any exception on the send port side, is it possible to propagate this exception to the client? any way to achieve this? Basically I want the client to be notified of any exception that occurs in the chain.
Please suggest.
thanks
MS

Hi MS,
All you need go do is enable "Propagate Fault Message".
Following the exact extract from MSDN on this context: "For the two-way send port, you can choose whether to forward SOAP fault messages on to the original caller
over a solicit-response send port by selecting Propagate fault message. If this option is not selected, BizTalk Server will generate a NACK first, and then suspend the message. If it is selected, BizTalk Server will treat
the message as a valid WCF response message from the external service and the response message will not be suspended because it is propagated."
If you need to handle this
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Mass update of Outbound Receiver port in we20 - Customer

Similar Messages

Maybe you are looking for