Mass upload (import) of MSP files

Hi,
We are on PPM5.0.
The standard PPM allows import of only one MSP file as cProjects, at one time.
We, however, have 1000s off MSp files to be imported. We need some automation for mass upload.
Please provide inputs on how this might be possible.
We are aware of the standard upload process (RPM_DX) and are already using it to upload files.
However, we also have a large number of MSP fIles for upload.
Please advise.

Hi Alpesh,
I was able to upload all the derived roles. What i found was that, there is a limitation on number of rows for primary org value file. It could be limitation of RE 5.2 SP9.
Whenever, primary org value file use to exceed 500 rows, it gives format error.
So, then i restricted the primary org value file within 500 rows & upload went smoothly.
Now, there is one query.
Is it possible, that all the roles which are uploaded can be set to phase generated.
Please suggest.
Thanks in Advance.
Regards,
Pravin

Similar Messages

Is PI recommended for intial Data-import / Mass-upload to MDM

we have a requirement as below:
there are around 500,000 records in a customer master in SAP R/3.
this data need to be imported into SAP MDM. (after this step, SAP R/3 will be removed/scrapped from the landscape)
after importing to MDM, the records need to be updated to SAP ECC.
so the requirement is something like:
SAP R/3 -
> MDM -
> ECC.
the R/3 to MDM import is one time, initial, activity, to be done for around 5 lac records.
to migrate these much data, is it recommed to use PI, for both inbound and outbound (w.r.t MDM) scenarios .
thanks in advance.
Ganesh

hi,
in general it's not recommended to use PI for mass uploads
but I guess in this case the only issue will be upload to SAP ECC
and not export from old R/3
so I guess you could use PI to export the data from R/3 to a file/files
and use those files in LSMW in ECC
Regards,
Michal Krawczyk

Uploading Importing text file & crosstab display

 I want to upload a text tab delimited file into our db, currently we
are uploading it to a temp table in the db, do some validation checks and write
to a table when done. I have two questions:
 1) Is there a more efficient way of upload/importing flat files into
the db via forms, like loading data into a non db data block and working on the
data via loops rather than sql in a temp table.
 2) I want to present the data to the user(for verification) via a form
screen as they have read it in, the only way I can think of doing this, is
populating a temp table and then using a data block based on a stored procedure
that contains a dynamic pivot query package since I don't know the
number of columns that the file will contain. Data blocks can do either
vertical or horizontal alignment but not grid.
 File will take the format of: 
 col1 col2 col3
row1 data_r1c1 data_r1c2 data_r1c3
row2 data_r2c1 data_r2c2 data_r2c3
row3 data_r3c1 data_r3c2 data_r3c3
row4 data_r4c1 data_r4c2 data_r4c3
 
 Thank you in advance 

Thank you for your reply
1) It's a utility for users and so it has to be through forms
Presently I think it is better to read it in to a temp table then I can use sql for validation which would be faster than looping through blocks. But with this approach I'm just a little worried about Lost Updates e.g. what if someone is changing scores in the regular update screen while another person is trying to import them via the import utility.
2) I have to use a stored procedure because I don't know how many columns a user will want to load in, sometimes it could be 2,3 or 5 etc. So basically I am looking at a way of presenting the data from it's stored format in it's read in format i.e. file format
File format =
 col1 col2 col3 coln
row1 data_r1c1 data_r1c2 data_r1c3 data_r1cn
row2 data_r2c1 data_r2c2 data_r2c3 data_r2cn
row3 data_r3c1 data_r3c2 data_r3c3 data_r3cn
rown data_rnc1 data_rnc2 data_rnc3 data_rncn
It is stored in the temp table as
row1 col1 data_r1c1
row2 col1 data_r2c1
row1 col2 data_r1c2
row2 col2 data_r2c2
Example
 Test1 Test2 Test3 Test4
John 54 45 70 65
Jane 38 55 72 70
Stored in the temp and subsequently written to Student Score table as
Student Test Score
John Test1 54
John Test2 45
John Test3 70
John Test4 65
Jane Test1 38
Jane Test2 55
Jane Test3 72
Jane Test4 70

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I updated

How do I get my videos to upload from my sony handy cam when I get the message The following file could not be imported. The file is in an unrecognized format. I am using a macbook pro version 10.9.3, I have 411 gb free space, it worked before I downloaded the latest update for iphoto.

You may be able to download and install the update from here: Digital Camera RAW Compatibility 6.01
If I upgrade to Yosemite will I be forced to go to the new Photos program
No. After upgrading (and of course make a back up first) you will need to update iPhoto to v9.6.1 (you won't be able to do this prior to upgrading). Here's how:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.
Photos is v1 of a new app, as yes it's not as mature as iPhoto. It uses a different technology for working with external editors. That requires Adobe to write an extension to let it hook into the new app. Not done yet, neither has anyone else.
Going forward: iPhoto will run on OS 10.10., but there is no guarantee for subsequent versions of the OS. You might want to factor that into your anger term thinking.

"Import from Text File" & "Upload from Clipboard" icon not appearng in F110

Hi Experts,
While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
Can you please let me know how to bring that icons there?
Points would be awarded.
Rgds,
Shailesh

Hi Ravi,
I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
Rgds,
Shailesh

HT204053 imported local ICS files will not upload to iCloud

Although I follow the instructions in http://support.apple.com/kb/HT4967 (iCloud: Manually Importing data....) there is no way iCloud will reflect the changes on my MacBook after I import each ICS file into the iCloud account. I am running ML. I tried several times both with iCloud calendard sync on and off (in system preferences) with no success.
I am really annoyed at iCloud and the mess it has created with my Mac Calenders and Notes. There is no wat to push from the Mac to the Cloud, rather than the cloud overriding every device??

I found my own answer following two main steps:
1. Follow these instructions for the calendars you want on iCloud from today onwards. Its tedious but it works in the end.
http://support.apple.com/kb/TS4337?viewlocale=en_US
Article: TS4337 --- iCloud: Advanced Calendar and iCal troubleshooting
2. Follow this tip for any other calendars you want to access but not on iCloud (e.g. archived calendars of old clients, projects, etc.)
https://discussions.apple.com/thread/4146260?start=15&tstart=0
essentially only disable the iCloud account from inside Calendars preferences,
and start importing calendars. When you enable again iCloud (from Calendars perefences) you will have both sets (looking as 2 accounts)

Mass upload of commodity code VEU4

Hi,
While doing Mass uploading of commodity codes using VEU4 for Non European Clountry, for the Additional Info field NIHON , system by default generates =2 but our requirement it has to have a default value=0 which is to be used for both Import and Export.
How to make the field NIHON value=0?
Is it in the Text file or somewhere in the config?
Regards,
Vengat

Hi Jurgen,
Thanks Very much, it helped.
Actual my requirement is to load the Commodity codes with the Field NIHON = 0 so that the commodity can be used for both Import and Export.
If I upload the text file in VIU4, by default system takes to NIHON = 1,
If I upload the text file in VEU4, by default system takes to NIHON = 2.
As mentioned in the OSS 1034696
If you confirm the dialog box with 'Yes', the system checks whether the 'Additional information' indicator of the old entry and the new entry are set differently. If this is the case, the system sets the 'Additional information' field to value 0 (Receipt / Import and Dispatch / Export).
Hence I have to execute the file in VIU4 or VEU4 for the first time to mass load of the commodity code ( by default it takes 1 or 2)
So to change the value from 1 or 2 to 0, need to execute the same file second time with YES in the dialog Box for the same data.
Note sure why SAP is so rigid here in this field NIHON as the same can be one of the Selection field.
Regards,
Vengat
Edited by: Vengata Raghavan on Aug 12, 2011 4:54 PM
Edited by: Vengata Raghavan on Aug 12, 2011 4:55 PM

Mass Upload of condition records in APO system.

Hi All,
I wanted to mass upload condition records in to the APO system for the transaction /N/SAPCND/AO11 from an external file.
Is there any FM available?
If FM is not available...which one is the best way to do this?
LSMW?? or BDC???
Please guide me..
Thanks,
Babu Kilari

At least the key fields of the conditiontable
(here 800) must be filled in structure ls_komg.
ls_komg-vbeln = '1234567890'. " document number
ls_komg-posnr = '000010'.      " item number
clear wt_komv.
ls_komv-kappl = 'V '.        " Application V = Sales
ls_komv-kschl = lc_kschl.    " Condition type
ls_komv-waers = 'EUR'.       " Currency
ls_komv-kmein = 'ST'.        " Unit of measurement
ls_komv-kpein = '1'.
ls_komv-krech = 'M'.         " calculation type;
                              "M = Quantity - monthy price
ls_komv-kbetr = '1234.56'.   " new condition value
append ls_komv to lt_komv.
call function 'RV_CONDITION_COPY'
exporting
    application              = 'V'
    condition_table          = '800'      " cond. table
    condition_type           = lc_kschl   " cond. type
    date_from                = '20061101' " valid on
    date_to                  = '20061130' " valid to
    enqueue                  = 'X'        " lock entry
    i_komk                   = ls_komk
    i_komp                   = ls_komp
    key_fields               = ls_komg    " key fields
    maintain_mode            = 'A'        " A= create
                                          " B= change,
                                          " C= display
                                          " D= create
with reference
    no_authority_check       = 'X'
    keep_old_records         = 'X'
    overlap_confirmed        = 'X'
    no_db_update             = space
importing
    e_komk                   = ls_komk
    e_komp                   = ls_komp
    new_record               = lv_new_record
tables
    copy_records             = lt_komv
exceptions

Mass upload of clauses in SAP Sourcing

Dear All,
Please let me know if we can do a mass uplod of clauses in SAP sourcing like we can do for the contract documents.
Requirement is customer wants to uplaod many number of clauses in clause library.
Thanks,
Vinay

Hi,
I havent done this myself and there is no such workbook for performing this function. There is however a template.csv available which can be used for mass uploading Clauses. Here is how you can retreive it:
Goto Setup > Import Data > Create> In the Upload Import File, select any sample .csv for upload in the picker field. Then in the Object type field select Clause. Make sure you check the Preview Import checkbox. After clicking next, you can see the template.csv available there.
Once you download the CSV to your local machine, you can see the fields available there are fill out with a few Clauses to see if this works for you. The process for importing the CSV will remain the same as for any other template. The only caveat I see is that sometimes users try and fix the Content options with a word document and that may not be achievable via this option.
Hope this helps,
Vikram

Mass upload of user photos in EP

Hi All,
I have to do a mass upload of user photos in EP. I tried it in two ways.
1.     In a network folder say
173.XX.XX.XXUserPhotos, I stored the photos and then I used the Mass photo upload iview, which is available inside collaboration demo role.
2.     I created a new task and given the below parameters,
1.     Task nameà MyPhotUpload
2.     Upload from folder à
173.XX.XX.XXUserPhotos
3.     Photo Typeà NORMAL
I clicked on save and then I run the task. I didnu2019t got any errors, at the same time I didnu2019t got any output also.
Then I tried it this way.
I created a nework path in System Administration à System Configuration à KM à CMà Global Services à Network Path (really sorry if I am being stupid)
Here I specified the network path and the login credential required to access this folder and named this network path as u201CMyNetWrkPathu201D
Now, I came back to mass upload ivew, there I deleted the old task and created a new task with
a.     Task Name à MyPhotoUpload2
b.     Upload from folder à MyNetWrkPath
c.     Photo Typeà NORMAL
I clicked on Save and then I run the task. Again the same result. No errors no success.
PS: I already specified the photo type check and photo size check in System Administration à System Configuration à KM à CMà Global Services àUserPhoto
Somebody please help me.
Regards,
SrinivaS

Hi,
it seems the portal doesn't have permissions to read contents from this physical folder.
Try to import a sample photo with "apply checked conditions" unchecked in mass upload iView.
If that doesn't help then try to increase the trace level to INFO for this app in Visual Administrator and see what is causing
the problems.
The location is com.sap.netweaver.kmc.people.photo.admin .
Eventuallly try to import files from local folder instead of network share.
Hope this helps.
Regards,
Ladislav

Regarding Error handling in Mass Upload of Organizational Structures Using RHALTD00

Hi all,
I am using standard program RHALTD00 for mass uploading of Organizational objects into SAP system. But incase if our input file has any error records, how can we track such errors? Can you please share your inputs.
Thanks,
Cs

Hi Sirisha,
Report RHALTD00 imports the records from the file and creates a batch input
session, which you can process either directly or using batch input
processing:
Batch input processing: When ever you will run the report in this way, error records handled in a session.
Direct processing:
Requirements to run this report is :-
The dataset must contain all of the records of infotype 1000. Only then can
other information be imported in any order that is required.
The dataset must not contain records with workflow infotypes (infotype
numbers from 1200 to 1299). Such records are not included in processing.
Thanks,
Sreeram

RAR 5.3 - Mitigating Control Mass Upload

Hi Everyone,
My client wants to perfrom a mass upload of Mitigating Controls, but I can't find the format of the tables that are needed.
I have tried creating a control manually, exporting it and then changing the file and uploading but it always throws an error.
I know that there is a SAP Note about this but it is Internal Only.
Can anyone help? I guess I am looking for standard upload file format or something of that nature.
regards
Simon

Hi Frank
as always you are the man who knows the answer!!
You were correct Excel 2007 had converted 2010-10-11 to 11/10/2010, during the importation process, even though I had told it to keep all fields as text.
Additionally, on almost every row of the export file after having made the changes in excel, it had added several "TAB" characters as well, so I had to go down every line of the upload file to remove the extra "TABS".
After that it worked perfectly.
Now I will attempt world domination, after all it must be easier than trying to configure Access Controls 5.3
Simon
Edited by: Simon Carty on Nov 26, 2010 10:05 AM
Edited by: Simon Carty on Nov 26, 2010 10:05 AM

Error in Mass role import in Role Expert

Hi,
While configuring role expert, in mass role import ,I am able to import the bulk download file but its import is getting failed and error is "File is in invalid format"
If I alter the downloaded file, another error is generated saying "Cannot write to Upload Directory
ursula\sap_temp\ROLEIMPORT or Directory does not exist.
Please help me out!
Regards,
Anubha

Hi Michael,
I am not able to import the SAP roles properly.
I downloaded the roles from backend properly. But while importing them I am getting a list of backend roles and against each of them following message Error in processing role infomation. Role not imported.
What could be the possible mistake? I have set Upload Directory = ursula\sap_temp.
One more problem, while creating a new role I am able to reach successfully till the risk analysis phase. After that, as soon as I click on approval , i am getting message Error in creating request.
I suppose the control should go to Access Enforcer from here.I have already set AC Workflow URL for role approval in Configuration -> miscellaneous.
Thanks in advance!
Anubha

Error in Mass role import

Hi All,
I am trying to do a mass role import in ERM. We are using version 5.3 SP10. When trying to mass import the roles I get an error Enter a valid Enterprise Role Management Information File format. I am using the dumps form executing the program /VIRSA/RE_DNLDROLES. I am using the output in .txt format.
Is there any way to get around this issue.
Thanks,
Chinmaya

Hello Chinmaya,
You need to have the information file and the org file in .xls format. Kindly download this file from backend and then change the extension to .xls, modify it to check that data is arranged in proper columns and then save it as .xls format. Once you do that and try to upload this error will not come.
Regards, Varun

ERM - Problem with Mass Role Import on GRC 5.3 SP9

We have just upgraded to SP9 on GRC 5.3. I am trying to reimport all my roles in ERM since the format has changed and we need most of this new information.
When I run /VIRSA/RE_DNLDROLES this program now outputs 3 files. Can someone tell me what format the 3 files shoudl be in? Should it be EXCEL or TXT? Should they have Header records or not? Should they be ANSI or UNICODE?
I am having no luck importing the files and I have tried just about every combination. I get the following error every time:
"Enter a valid Enterprise Role Management Information File format"
Thanks so much for your input.
Peggy

The information is actually in the updated configuration guide:
- mass download is a text file
- role information is Excel
- org level is Excel
All files can stay as they are. The org level export makes uploading derived roles easier.
However, as you discovered, there seems to be an issue with the import. Here's a workaround: at the right side of the sheet, add an extra column with 1 character in every line, and also add another row at the end. Save, and the roles will upload just fine.
Frank.

Mass upload (import) of MSP files

Similar Messages

Maybe you are looking for