Mass Upload of Routes

Hi
I have a need to upload about 13000 routes (Route Determination) in the Shipping Menu.
This is a two level activity to enter the source and destination country and then on a second level enter the route to be used.
There is no transaction code for this it seems, only menu path via spro.
Does anyone have a solution to do a mass upload?
Thanks
Lee

hi,
U can use LSMW for the uploading---->use batch input RECORDING method for uploading
follow this link which gives the procedure for LSWM with snap shots. This ppt will give u both menthod
1.BAtch input recording
2.batch/INPUT METHOD
<a href="http://www.slideshare.net/arun_bala1/sap-sd-lsmw-legacy-system-migration-workbench">LSMW</a>
regards,
Arun prasad
Message was edited by:
        arun prasad
Message was edited by:
        arun prasad

Similar Messages

  • Mass upload of route determination

    Hi,
    I have a question with regards to a configuring the route determination, our question is not about configuring the route but having to replace one of the old routes records to a new route.
    SPRO  LE  Shipping  Routes  Route Determination  Maintain Route Determination.
    We have created a route and all the necessary setup in the spro, and we realize that there are more than 3000 existing old route determination records (i.e. in table TROLZ) which need to be replaced with the new route. It will be impossible for us to manually replace each of the route records on above SPRO path one by one.
    Question:
    1 u2013 I am thinking about using LSMW, and am wondering if this is possible because there are two method in LSMW:
    Method 1 u2013 Standard Batch/Direct Input. Here the Object drop-down box field does not have route determination object as it only have all the standard master data (i.e. material master, vendor, PIR, etc).
    Method 2 u2013 Recording.  How to perform recording as this is a configuration and not a business transaction like open PO, SO with transaction code?
    Please share how to upload this new route and if LSMW is the right way, I am stuck on either the method 1 or method 2. Or is there any other way beside LSMW (please describe detail).
    Thanks
    Tuff

    Hi Csabar,
    Thanks.
    BUt may I know clearly what do you mean by your following statement?
    I would suggest you should always create/modify/delete only one record in config via LSMW. 
    I have more than 3000 records for this exercise, do You mean I should test it out on one record first in 0VRF during the recording??
    thanks
    tuff

  • Mass upload of VC object dependencies

    Hi Gurus,
    My client is implementing VC, which is now in legacy system.  There are around 25K object dependencies to be uploaded.
    These include all types of selection conditions, preconditions & procedures. Is there any way to mass upload all these object dependencies.  Or do we need to manually type all the object dependencies. 
    We are planning to create constraints as well, which I understood should be manual.
    Any third party tool to mass upload is also fine.
    Thanks,
    Surya.

    Hi,
    It is better to have them uploaded manually. Because you cannot guarnatee the sequences of ODs will be same for all the objects viz, BOM and routing.
    Regards,
    Pavan

  • Mass upload of BP into CRM

    Hello!
      I peform mass upload of BPs into CRM. I use FM BUPA_CREATE_FROM_DATA to create BP itself and BUPA_ADDRESS_ADD to save BP addresses and call these FMs in the same turn for each BP.
      So, if I do that for 1-2 BPs, it works perfectly. All BP are saved in CRM with there addresses on COMMIT. As soon as the number of uploaded BP increases(between two commits), for example, up to 100, there is an error happens:   E831(AM) in ADDR_MEMORY_SAVE.
      As well as I understood, it happens because of address saving peformed before BP saving on commit. I tried first to save BPs only (with commit) and then their addresses, and it worked on mass upload without any error.
      So, is there any idea about how to upload each BP with his address simultaneously without any error by mass upload?
        Thank you.

    You can upload millions of records using these function modules.Infact I am doing the same.
    Make sure that the data structures,tables which are passed to the Function modules are cleared for each time and FM's should be in the below mentioned order.
    BAPI_BUPA_CREATE_FROM_DATA
    BAPI_BUPA_ADDRESS_ADD
    BAPI_TRANSACTION_COMMIT.
    Thanks,
    Thirumala.

  • Mass upload of Material

    Hi,
        we have to do mass upload of material master  which includes lot of classification / characteristics for a plant. could you please let me know how do we do this and which is the best method? ( BAPI or BDC)
    Thanks
    Arun Vijay D

    Hi,
    Use direct input method using LSMW. The details are as:
    For material master data:
    Object: 0020
    Method: 0000
    Program: RMDATIND
    For material classification
    Object: 0130
    Method: 0002
    Program: RCCLBI03
    Regards
    Amit

  • Mass upload of batch chracteristic Values using LSMW

    Hi,
    Is there any way from which I can mass upload the characteristic values of batch class.
    LSMW- Bapi issue full in this case or have to go with recording or BAPI programming?
    Please let me know the process.
    Thanks in advance
    Ravi Kumar

    Hi
    Thanks For the help. I have used LSMW Direct input method.
    I have used the below format in text file
    Class/mat    batch             class                              char                                 Char Value
    023     Bunny 1011010     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     164.95
    023     Bunny 1011011     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     164.61
    023     Bunny 1011012     ZZ_COTTON_CLASS     ZZ_BALE_QUANTITY     162.71
    Its giving below error,
    Error Changing Classification Data
    Other
    ( CLAP_DDB_UPDATE_CLASSIFICATION: exception    13  )
    023 Bunny 1011010                                      ZZ_COTTON_CLASS
    Error Changing Classification Data
    Other
    ( CLAP_DDB_UPDATE_CLASSIFICATION: exception    13  )
    023 Bunny 1011011                                      ZZ_COTTON_CLASS
    Thanks & Regards
    Ravi Kumar

  • Mass Upload of Photos in Portal

    Hi,
    I am trying to do mass upload of JPEG Photos.
    I have tried using User Self Service and that works fine.
    Reqmnt is that administrator needs to upload 100 photos as a bulk for each user.
    I have read the document on help.sap.com and it certainly gave me few insights but if anyone has done this before, i would like to steps on how to go about doing this.
    Regards,
    Dev

    Hi;
    Assign yourself to the role
    pcd:portal_content/com.sap.pct/Collaboration/DemoRole
    After that you will have the Link
    "Collaboration Demo\People Centric"
    This gives you the possibility to make a manual or
    mass upload of user photos.

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Mass upload of commodity code VEU4

    Hi,
    While doing Mass uploading of commodity codes using VEU4 for Non European Clountry, for the Additional Info field NIHON , system by default generates =2 but our requirement it has to have a default value=0 which is to be used for both Import and Export.
    How to make the field NIHON value=0?
    Is it in the Text file or somewhere in the config?
    Regards,
    Vengat

    Hi Jurgen,
    Thanks Very much, it helped.
    Actual my requirement is to load the Commodity codes with the Field NIHON = 0 so that the commodity can be used for both Import and Export.
    If I upload the text file in VIU4, by default system takes to NIHON = 1,
    If I upload the text file in VEU4, by default system takes to NIHON = 2.
    As mentioned in the OSS 1034696
    If you confirm the dialog box with 'Yes', the system checks whether the 'Additional information' indicator of the old entry and the new entry are set differently. If this is the case, the system sets the 'Additional information' field to value 0 (Receipt / Import and Dispatch / Export).
    Hence I have to execute the file in VIU4 or VEU4 for the first time to mass load of the commodity code ( by default it takes 1 or 2)
    So to change the value from 1 or 2 to 0, need to execute the same file second time with YES in the dialog Box for the same data.
    Note sure why SAP is so rigid here in this field NIHON as the same can be one of the Selection field.
    Regards,
    Vengat
    Edited by: Vengata Raghavan on Aug 12, 2011 4:54 PM
    Edited by: Vengata Raghavan on Aug 12, 2011 4:55 PM

  • Mass Upload doesn't work

    Hi everybody,
    i am trying to upload user photos via mass upload iview. Therefore i create a folder (c:\photos). In this folder i have two files
    a)  mapping.properties.txt with the line: Anton=1011
    b) 1011.jpg
    I use the iView for Massupload from content provided by sap -> collaboration -> demo role -> iviews. I create a task with the following properties:
    Task name:           Mappupload
    Upload from Folder:           c:\photos
    Photo type:           NORMAL
    Apply checked conditions:      (no checked)
    Use Mapping:           (checked)
    After starting the task the photo was not updated and there was nothing in the application log!?
    What could be the problem? I can add the file manually but not through mass upload.
    Has anybody use a mass upload?
    regards,
    Seed
    Edited by: seed_mopo on Sep 26, 2008 11:04 AM

    Hii
    Pls Use these threads:
    https://www.sdn.sap.com/irj/sdn/thread?messageID=48369#48369
    https://forums.sdn.sap.com/click.jspa?searchID=16795891&messageID=4282098
    https://forums.sdn.sap.com/thread.jspa?messageID=9087#9087
    https://www.sdn.sap.com/irj/sdn/thread?threadID=257887
    Thanks:
    Hope it would be helpfull

  • Mass Upload of condition records in APO system.

    Hi All,
    I wanted to mass upload condition records in to the APO system for the transaction /N/SAPCND/AO11 from an external file.
    Is there any FM available?
    If FM is not available...which one is the best way to do this?
    LSMW?? or BDC???
    Please guide me..
    Thanks,
    Babu Kilari

    At least the key fields of the conditiontable
    (here 800) must be filled in structure ls_komg.
    ls_komg-vbeln = '1234567890'.  " document number
    ls_komg-posnr = '000010'.      " item number
    clear wt_komv.
    ls_komv-kappl = 'V '.        " Application V = Sales
    ls_komv-kschl = lc_kschl.    " Condition type
    ls_komv-waers = 'EUR'.       " Currency
    ls_komv-kmein = 'ST'.        " Unit of measurement
    ls_komv-kpein = '1'. 
    ls_komv-krech = 'M'.         " calculation type;
                                  "M = Quantity - monthy price
    ls_komv-kbetr = '1234.56'.   " new condition value
    append ls_komv to lt_komv.
    call function 'RV_CONDITION_COPY'
      exporting
        application              = 'V'
        condition_table          = '800'      " cond. table
        condition_type           = lc_kschl   " cond. type
        date_from                = '20061101' " valid on
        date_to                  = '20061130' " valid to
        enqueue                  = 'X'        " lock entry
        i_komk                   = ls_komk
        i_komp                   = ls_komp
        key_fields               = ls_komg    " key fields
        maintain_mode            = 'A'        " A= create
                                              " B= change,
                                              " C= display
                                              " D= create
      with reference
        no_authority_check       = 'X'
        keep_old_records         = 'X'
        overlap_confirmed        = 'X'
        no_db_update             = space
      importing
        e_komk                   = ls_komk
        e_komp                   = ls_komp
        new_record               = lv_new_record
      tables
        copy_records             = lt_komv
      exceptions

  • Mass upload through Web Dynpro application possible?

    We want to develop a custom aplication with Web Dynpro ABAP for master data maintenance. About 90 % will be done manually but we also want to have the possibility to do mass uploads (comparable with LSMW's in SAP R3 for win gui transactions: users send us a spreadsheet and we load it for them using a LSMW). I found one option by building Adobe Interactive form offline scenario using xml messages but I don't want to be forced to use Adobe only to enable mass uploads that will only happen in 10 % of the cases.
    I am loking forward to your suggestions!
    kind regards
    Angelique Heutinck

    I got a very useful answer from Thomas Jung (SAP) via a site he did setup with a couple of other SAP experts, also see http://enterprisegeeks.com/blog/2009/03/31/abap-freak-show-april-1st-acf-updownload-in-web-dynpro-abap/comment-page-1/
    My question:
    I think this new UI element ACFUpDownload cannot be used to do mass uploads/updates of data that need to be stored in SAP tables?
    Answer Thomas:
    This UI element is just about the transfer of data from the client machine to the server. It has nothing to do with how the data is used or processed after upload. Think of it as the equal to the CL_GUI_FRONTEND_SERVICES class and methods GUI_UPLOAD and GUI_DOWNLOAD.
    My question:
    Is there a tool like LSMW, CATT, eCATT that we can use for recording webenabled transactions (applications developed in Web Dynpro ABAP)?
    Answer Thomas:
    You shouldnu2019t need a tool like LSMW, CATT, eCATT that is tied to the user interface. With WDA you should be using MVC to design your application. This is part of the reason for MVC so that you have a clear separation of the model - business logic. You should always have a reusable class that can be called to input and create data with the same validations without going through the user interface. This is the process that SAP is following as we create new WDA screens. We use the enterprise services and their implementation classes as the Model for the WD Components. This ensures that you always have a clear API to use to mass import data.
    Although we wouldnu2019t recommend doing any kind of mass data load via the user interface any longer - eCATT will be supported for automated testing of Web Dynpro ABAP applications as of NetWeaver 7.0 Enhancement Package 2.

  • Vendor Master Mass Upload or change T code

    Hi What is the Tcode for Vendor Master Mass Upload or change .
    Thanks
    Lekhram

    You can use T_code XK99 for mass maintainence ( changes) for Vendor mater data.

  • Mass uploading of Documents with ABAP

    Hello,
    i have to write an ABAP-Program, to automatically mass-upload documents to cFolders.
    I have the FUBA CFX_API_DOC_CREATE where i can create document-hulls. Now i think i have to use CFX_API_DOC_DOCUMENT_WRITE to upload the content. The FUBA needs the filling of the TABLE_Parameter IT_CONTENT, which is the content of a file. My Question: How can i fill this Parameter?? Is there a FUBA, where i can simply fill this parameter???
    Thanks
    Best Regards
    Helmut Wenzler

    ok, found the solution...a simple "GUI_UPLOAD" works
    Best Regards
    Helmut Wenzler

Maybe you are looking for