Mass Vendor Deletion and posting Block unblock.

Hi All,
I have done the mass deletion flag and posting block of vendors ate P.org and Co.code level through t.code-XK99.
I want to retrive my changes and vendor shuold active again instead of populating a warning message.I am aware of T.Code-XK05 but i tried it through T.Code-XK99 however i am not able to unblock those vendors.
could anyone let me know were i am ,missing.
Regards,
Gaurav Surana

Transaction MASS > LFA1 is same as in XK99
XK99 should work in your case. Please check that you are selecting the correct table and fields to be changed in this XK99 transaction.
Are you also getting any error message during the saving in XK99?
Regards,
SDNer

Similar Messages

Why can not freeze book inventory Storage location and Posting block?

Hello,
I tried to freeze book inventory storage location and posting block at storage location level in SAP.
1) OMBP -> "Freeze book inventory storage' is checked at that storage location.
2) MI01 -> the 'Posting Block' and 'Freeze book inventory' in the Physical Inventory Document is checked.
3) Post the Physical Inventory Document by using MI02.
But, I am still able to post inventory movement at that storage location after executing the above.
(I run MB1C with movement type 501 at that location.
I input the material number which are in the created Physical Inventory document.
The posted manterial document is created after I run MB1C.
The document date and the posting date in MB1C are the same date of Physical Inventoery Document.
I can see this material inventory movement from MB51!! )
My question is: Why SAP is allowed to execute the inventory movement after the 'freeze book inventory storage location' and 'Posting block' are checked at OMBP and MI01 ?
Any idea?
Help me, thank you.
Regards,
Sylvia Chen

Problem solved. Thank you for all help!!

Vendor 800040 and posting data have different withholding tax types

HI
need some help..
i ve created the lease in contract but unable to activate it... getting the following error
Vendor 800040 and posting data have different withholding tax types...
how to solve this issue,,

Hi,
could you please add the error message ID and error message number.
Thank you.
Regards, Franz

Contact deleted and/or blocked me?

I have been browsing through the forum trying to find a definite answer, but since no topic answered my questions 100% for what I see I decided to post it.
I'm using the latest version of Skype on Windows 8.1. This is what I see:
Grey question mark instead of online/offline circle.
I can still see their avatar, and "Last Seen" status. (I know some people can set their picture to "Public", though).
Under their name, it says "pending friendship request".
When I see their profile, it says "This contact has not shared their details with you".
When i send them a message, nothing happens, I get no "pending" message as if the message was delivered successfully.
The other day I logged in from another laptop, and their picture had changed, though when I logged in from mine it showed their old picture. So I guess it's safe to assume their picture "doesn't update", yet I can see it.
I also use Skype for iPhone, and can't see their picture from there. I only get the skype default silhouette.
So far it seems like she deleted me. But I'm not sure if she both deleted AND blocked me. I want to know if the message I sent her was delivered and she was able to read it. That's all.
Thank you in advance.

I don't think you can tell... I have been either blocked and removed, or removed from a friend's list. I have 2 laptops. On one my messages appear to have got through and on another there is a pending circle says 'not delivered yet' when I scroll over it. I suppose it doesn't make any difference in that they don't want to communicate. It would be nice to know whether messages have been seen though.

Set Posting block and Purchasing block automatically upon vendor creation

Hi.
I have a requirement to automatically set the purchasing block and posting block to 'X' upon creation of vendor master. I have seen a user exit to do this but then I can't seem to find a way to set the SPERM field to 'X'.
Please help. THanks.

Transaction FIBF start the event manager.
on menu: environment->info system (P/S) and then execute: it will be displayed all possible events.
between event 1410 and 1460, you will find all events about vendor.
click on documentation, it will tell you when the event is reached and what you can do.
After you have choose an event, you must create a function module, copying it from the sample function module of the event.
Once you have created your own funcion module, you should go to:
FIBF->SETTINGS->P/S MODULES.
This part of customization is not very clear to me, i've never done by myself. Anyway, here you associate at the businness event the function module you have created.
Sorry for not beeing exaustive, hope anyway could be help you.
Regards
Andrea

Future Posting Block for Inventory document

Hi Friends,
My client want to create a PID (Physical Inventory doc) to day with planned count date next week and posting block checked.
But, they does not want to block it to post till the begining of planned count date. Practically, they want the posting block to be effective on Planned count date.
Can it be??
Appreciate your help in advance.
Regards,
Dev.

Hi,
Please read SAP online help:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/4d/2b8d3943ad11d189410000e829fbbd/frameset.htm
Here you can see that transaction MI32 can be used to set posting block in mass.
When count date comes:
- user can set the block via MI32 in mass
- in advance you can schedule ba background job for MI32 in order to set the posting block
I wouldn't go to development...if it is not necessary...
(my opinion)
Regards,
Csaba
Edited by: Csaba Szommer on Feb 26, 2010 10:43 PM

RE:Need data vendor no with posting date

Hi All,
one of my user requires the data of the GR report with vendor no and posting date data to analysis the batch job.kindly anyone can help me from were i can fletch the data i had tried in MKpf i can get the posting date data but when comes to vendor i can't able to get the data of the GR done for the particular vendor on the particular date.kindly help me out.
Thanks in advance.

HI,
Why you are not using MB51 report ?
Go to MB51
Here enter Vendor ,Movement type 101 ,Posting date ( Plant ,material if you want )
You will get all the desired data
Edited by: redriver on Dec 22, 2011 12:12 PM

Automatic blocking and deletion flag for temporary unblocked vendors/custom

Hi All,
Can you please help me IS there any Standard Reports for the Follwing,
*"automatic blocking and deletion flag for temporary unblocked vendors/customers in Master Finance SAP machines"*.
Please reply me as soon as possibly.
Thanks & Regards,
Pavithranad.
Moderator message: please research before asking, do not assign higher urgency than normal.
Edited by: Thomas Zloch on Mar 3, 2011 2:43 PM

In XK06, flagging Vendor for deletion, I get warning "vendor xxxxx has open items in company code xxxx". Does this mean open Invoice Items, pending payment in FI? Since this is just warning I can hit enter and go ahead and save.
- YES YOU ARE RIGHT. IT CAN ALSO INCLUDE OPEN PO.
But, I can come back to XK06 and UNflag this same vendor for deletion? How would it affect the open items/POs...etc?
- THAT'S WHY THE MESSAGE IS AN WARNING AND NOT AN ERROR. (My Opinion)
Does basis has to do some sort of execution in order to actually delete the vendor master from the database? Would basis get a error when there are pending open items for vendors flagged for deletion?
- NOT RECOMMENDED. ANY DATA CAN BE DELETED THOUGH. IF YOU ARE ON ECC 5.0 OR ABOVE AND USING SE16N TO DELETE, YOU WILL NOT GET AN ERROR.
What's the advantage of using XK05 (blocking/unblocking) over XK06 (flagging/unflagging for deletion)?
- NOT SURE IF THERE IS ANY ADVANTAGE.

Posting block and Marked for Deletion

Hi All,
My clients wants to know the vendors who are either marked for deletion or blocked for posting when was the date for the block or marking it for deletion and the person responsible.
Though i can see that one by one through Vendor master but i need to give this in report format.
Even with Fk04 i am not able to make out.Can you please help me out.Bit urgent

Hi,
You can check old value and new value by using table CDPOS.
If you want to know the time and person responsible by using table CDHDR
In table, put table name LFA1/LFB1 and required field like for field SPERR (LFB1) is for posting block for selected company code and field SPERR (LFA1) is for posting block for all company codes.
If you want to know it for specific vendor, then given vendor number in Object value or leave it blank for all items.
Hope it will be useful.
Regards,
Vinod

Function Module for blocking, unblocking and deleting assets

Hi,
Are there function modules available for blocking,unblocking and deleting assets in SAP.
Can I user 'BAPI_FIXEDASSET_CHANGE' for the same?
Thanks in adavnce,
Laxman

Hey,
I tried by putting the values of company code,asset number,subnumber, transaction type as 'A' and passing the value of INLA-XSPEB as 'X' in FM ASSET_MASTERRECORD_MAINTENANCE to block the asset but it is not working. I am trying many other things. Can you suggest what are the mandatory fields that need to be passed for the asset to be blocked.
As there are lot of parameters in this FM, I am little confused. Is there a proper documentation available somewhere to understand the flow.
Thanks in advance for the help.
Laxman Pai.

F110 - Error Msg "No payment due to delete flag or posting block"

When I use F110 To auto payment a AP open item, the system show the message "Vendor <Vendor Code> <Company Code>: No payment due to delete flag or posting block" in job log.
The AP open item information :
amount 480.
bline date : 2008/09/29
payment term : immediate payment
due date : 2008/09/29
vendor payment method : E
D : expense 480
C : AP - <Vendor Code> 480
The parameter in F110 :
run date : 2008/11/10
indentification : TEST
Parameter :
posting date 2008/11/10
docs entered up to 2008/11/10
company codes : <Company Code>
pmt meths : E
next p/date : 2008/11/11
vendor codes : <Vendor Code>
I don't understand the mean of "Vendor <Vendor Code> <Company Code>: No payment due to delete flag or posting block", how should I payment this AP open Item by F110.
Best regards,

Hi Eric,
Seems like your vendor has been blocked at company code level for any further posting. Try and check with transaction code FK05 or XK05.
If it's blocked then just unblocked it and then try run your payment run.
Cheers
Samir

Vendor master - restricting posting and allowing payment run

Hi,
We have a list of Vendors which needs to be deleted.
Our requirement is that we have certain Vendors who have open items, so our requirement to restrict further postings to the Vendor but allow the open items for Payment run.
Is there a possibility in SAP for such facility?
Thanks in advance.
Regards,
Srinivas

Hi,
Good morning and greetings,
There is an option to achieve your requirement without blocking the vendor.
Step No.1 : Establish a purchasing block for the vendor and that would mean no purchases can be made from the vendor and in turn no open items. Please go through the following link for more understanding.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/53/c9866eca3711d2b494006094b9114a/frameset.htm
Step No.2 : There are chances that user can still use FB60 to create invoice for vendor...to control that, create a validation rule in OB28 stating that no entry can be posted for the vendor code...if it is going to be for a set of vendors then create a set ID using GS01 for those set of vendors and call the set ID in OB28...This step would arrest the open item being created for the vendor.
In this way, the vendor master would be still open for making payments for the existing open items, but no new open items would come for the vendor.
Once the open items are cleared, delete the vendor once and for all.
I am sure this would meet your requirement.
Please reward points if found useful
Thanking you
With kindest regards
Ramesh Padmanabhan

Problem about Asset Deletion and Blocking

Hi Gurus:
I want to know what difference is between deletion and blocking of fixed asset? Please give me some more information, thanks!

Hi,
Please refer to the following explanation:
Asset blocking: Set the blocking indicator in the asset master record. Once the blocking indicator is set, you can no longer post acquisitions to this asset. The idea behind this, for example, is to prevent future postings to an asset under construction once the project is complete. After approval, the asset can be unblocked and reuse it again.
Asset deletion: You can delete an asset master record to which no postings have been made, directly online, without archiving. In addition, it is also possible to manually delete old assets (legacy assets from your previous system) during the asset data transfer process.
Hope can help you!
Regards
Tao

Mass Inactive Vendor Deletion

Dear Frnds
I want delete vendors which are not active for last three years.
is there any standard program n SAP to mark deletion flag for three years or older vendor?
please reply as soon as possible
thanks

Hi Mathew,
Pls note there is no program to display inactive vendors in SAP, You either have to go the tables BSIK,BSAK and download in Excel and also get data from LFB1 and do a Vlookup.*need to be an excel pro or develop a custom program.
And If the requirement is due to SOX or other legal stuff you also have to take into consideration that when you post to the vendors you cannot delete them unless you archive the data. , So as long as the Vendors were not posted to you could go ahead and delete or as an alternative try to block them if there was no activity in the last 3 years.
Hope this helps, and assign points if found usefull.
Thanks,
Praveen

Diff between Block/unblock & mark for deletion of GL accounts

Can any one let me know the difference between Block/unblock & mark for deletion of GL accounts

Hi,
If you block a GL Account using transaction code FS00, the account is blocked for posting. No financial transactions can be posted to that account. We can unblock the GL Account at any time by clicking on unblock icon. Blocking can be done at Company Code level or at Chart of Accounts level.
For deleting or archiving the GL Master data it needs to be first marked for deletion and then delete it. This can also be done at Company Code level or at Chart of Accounts level.
You can also read the following link:
http://help.sap.com/saphelp_46c/helpdata/en/c7/a89dd243dd11d182b30000e829fbfe/frameset.htm
Thanks
Murali.

Mass Vendor Deletion and posting Block unblock.

Similar Messages

Maybe you are looking for