Massive Batch Entry Help!!

Hello,
I is there a transaction code to edit or change items on a transfer order.
like their country of origin. these are the steps I follow to change the country of origins:
I go to LT21 then enter the TO# then double click on the item then it give me display to single item overview.
then I double click the batch number and it opens MSC3N. then I open a new transaction MSC2N and change the country
of Origin that way. this is OK for maybe 4-5 items per TO, but it gets quiet repetetive and cumbersome at around 60-80 lines of items on a single TO. Is there an easier way for this? like instead of displaying MSC3N when I double click the batch number is it possible for it to display MSC2N?
Thanks for your help,
Mani

Anybody? I really need help with this please.
Thanks,
Mani

Similar Messages

  • User  exit  needed (Problem related to duplicate batch entry in Migo(GR))

    Dear all,
                  I need a help from you.we facing problem in Goods receipt in MIGO.
    where we want to apply a check on batch which has already been assigned to a raw material in MIGO  .we are using manual
    batch entry .we don't want to make duplicate entry of same batch
    against any material.
    I tried to find out the user exit for that but i have not succeed .
    what is solution to
    avoid duplicate batch entry.

    Transaction Code - MIGO                     Goods Movement
    Exit Name           Description
    MBCF0002            Customer function exit: Segment text in material doc. item
    MBCF0005            Material document item for goods receipt/issue slip
    MBCF0006            Customer function for WBS element
    MBCF0007            Customer function exit: Updating a reservation
    MBCF0009            Filling the storage location field
    MBCF0010            Customer exit: Create reservation BAPI_RESERVATION_CREATE1
    MBCF0011            Read from RESB and RKPF for print list in  MB26
    MB_CF001            Customer Function Exit in the Case of Updating a Mat. Doc.
    No of Exits:          8
    USER EXIT
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sapgenie.com/abap/code/abap26.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
    http://www.easymarketplace.de/userexit.php
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sappoint.com/abap/userexit.pdfUser-Exit
    http://www.sap-img.com/ab038.htm
    http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
    http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
    http://www.sap-img.com/abap/what-is-user-exits.htm
    http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
    Rewards if useful.........
    Minal

  • Problem with Entry Help

    HI,
    My system is configured properly and could fetch from Backened systems using Find data bar. i could pull bapis's frim r3 backened which is configured well.
    I am trying to create Entry Help.When i go to Tools->Entry List manger->
    when i select value help list,Wizard is opening.
    In wizard its asking for select systems, but i could not find my R3 system in that list.Any thing i missed.
    Any pointers would be appreciated with points
    Regards
    shekar chandra

    Hi,
    You cant find R3 system in Value help wizard. It can display the following system only
        SAP BI systems
        XMLA systems
        JDBC systems
    Refer the following link
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/3d/0dff3485644ad28483e9caba04d9a0/content.htm">http://help.sap.com/saphelp_nw04s/helpdata/en/3d/0dff3485644ad28483e9caba04d9a0/content.htm</a>
    Regards,
    Hemalatha
    /Assign points if helpful/

  • Entry help check fot the posting key in user exit.

    Hi,
      I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
       If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
    Thanks in advance
    Regards,
    Reni

    Hi,
      I am using an inbound idoc for posting FI document.I am just parking the document for the time being .For this i am using the user exit EXIT_SAPLF050_006.
       If I want to change this parked document as save as complete document is there anything that I can do in this user exit.Can you please tell me the entry help check for the posting key (changing parameter) in the exit?
    Thanks in advance
    Regards,
    Reni

  • Searc help in entry help/Check tab vs Search help in Further Char-Data elem

    Folks,
    I have a screen field which is linked to a structure.When I look at that structure's entry help/check tab in se11 this field is having a collective search help.Now I want this to be replaced by a Z search help.
    If my understanding is right I need access key for this structure so that I can link the z search help in entry help/check tab against this field.
    My query is whic is the right way
    1.Linking the z search help in the entry help/check tab against that field in the structure at SE11 level
        or
        Linking the Z search help in Further Characterisitics tab of the data element used by this field.
    Either way the search help will be reflected at all the places wherever this field is available in the screen.Am I right ?
    or
    2. Linking the search help to a data element is different from linking the seach help to the field in that structure in entry help/check tab ? If they differ how do they differ.Kindly let me know
    Thanks,
    K.Kiran.

    Not true.
    Search help assigned at data element level is independent of that assigned at structure level, and the latter has higher priority. Please read "Input Help Hierarchy in the ABAP Dictionary":
    http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm
    The structure level assignment can (and generally is) linked to more than one field, not only the one that triggers the search help. That depends on the search help importing and exporting parameters. The data element assignment can only affect the field in which it is used.
    Nevertheless, even the search help defined at structure level could be overriden in the program (e.g. PARAMETERS...MATCHCODE OBJECT, AT SELECTION-SCREEN ON VALUE-REQUEST, PROCESS ON VALUE-REQUEST, etc). If that is not your case, it's the structure assignment that you want to change (have into account that it will affect any other dynpros which use that structure).

  • 'TO BATCH' ENTRY IN MFBF

    Dear Expert,
                We have maintained more than one VALUATION TYPE in our
    production related material masters(SEMI FINISHED & FINISHED ASSEMBLIES). So while doing Production Confirmation in MFBF, system is proposing all the related Valuation Types of that Header Material in 'To Batch' field.
    Our Valuation Types are parrallel with our Plant Codes i.e. if we are confirming production for a material in plant 1100 then Valuation Type will be same 1100. More than one Valuation type is opened in Material Masters because different plants are producing the same products.
    Now the problem is User is confirming the production in MFBF with wrong Valuation Type in 'To Batch' entry. So we want that as default Plant Code will be picked up in 'To Batch' field after mentioning Material & Plant code in MFBF.
    We are waiting for your positive response.
    Thanks & Regards,
    Pradeep Luhach
    SAP-PP

    Hi Pradeep,
    Ask your technical consultant to add logic for this either in user exit or BADI.
    User Exit - XMRM0001
    BADI - RM_BFLUSH_GOODSMVT( applicable to ECC 6.0)
    Let me know if you solve this.
    Thanks & Regards,
    Dhanamjaya

  • Time manageru2019s workplace -No possible entries help available for this time

    Hello Experts,
    I am configuring time manageru2019s workplace.
    I can insert an employee , I can see his detail, planed schedule of time, but I cant change its TIME ID it is showing there like ?03 ( No possible entries help available for this time data ID )
    I have configured Time IDs also accordingly.
    I used definition set SET_BE
    And subsets P,Q,R
    I created time data IDs A- Absence ,B- Avilability ,U-Leave
    Please let me know where I am going wrong.
    Thanks and Regards
    Jaydeep Jadhav

    Hi,<br>
    Recheck all the nodes under TM->TMW. If you have maintained groups , please check them.
    Also request the abaper to debug and find which query is failing.
    Good luck<br><br>
    Thanks,
    Amosha
    <br><br>"Known is a drop & unknown is an OCEAN!"

  • Lsmw batch entry does not show the field

    Hello, I use lsmw recording for employee hiring.
    I use 'PA30' transaction and 'Z0' Action.
    I need to hire employee with 0% employment (persons which in the maternity leave),
    but I can't do that becase Infotype 1000 in the 'Z0' action does not display the employment filed (p1000-prozt). It sets 100% by default, That happens only in the batch entry, do you know how to hack it ?

    Why do you hire the person with 0% employment? Why can't you post maternity leave for those employees?
    Regards
    N  Navaneethan

  • Difference between M (Read entry helps) and R (Read) in P_ORGIN

    Hello Gurus,
    I have question regarding the authorization level in P_ORGIN. The enduser has access to the Read 'R' access but When
    he  tries to assign  (PERNR xxx) to an order he does not see the user.
    SU53 says that authorization level 'M' (Read with entry help) is missing. Currently it is setted as R,
    please let me know if the end user can be able to see with R only as it is also read access.
    Regard's

    Hi Salman,
    Look at the following note from SAP make sure to have correct combination for both P_orgin and P_pernr.
    this readily available. Once you have the proper assignment of infotypes and subtypes you will be good to go.
    use ST01 to trace the authorization failure, Su53 only displays the last step in your authorization failures.
    Note:
    Definition
    Here you can define the authorization level for the HR and FI Travel Management application components. You must determine whether the field is used together with:
    objects for HR infotypes
    HR: Master data
    HR: Master data - extended check
    HR: Master data - personnel number check
    HR: Applicants,
    the data stored in HR clusters
    HR: Cluster,
    or with the relevant object in Statements
    HR: Statements.
    or in FI Travel Management
    FI: Travel Planning
    FI: Travel Accounts
    Possible values if the field is used together with one of the four first objects (the values E, D and S may only be specified together with R):
    M (read with entry helps)
    R (read),
    S (write locked record; unlock if the last person to change the record is not the current user),
    E (write locked record),
    D (change lock indicator),
    W (write data records)
    (all operations).
    Note:
    Users with write authorization should always also have the relevant read authorization. In other words, the user should also have the correct authorizations for authorization level R together with each of the authorization levels E, D, and W.
    The values E and D or S can be used to implement the double verification principle.
    Possible values for HR: Cluster are:
    R (read),
    U (write to the database; this includes exporting the data to a buffer but not reading the data)
    S (export data to a buffer; the database is not updated. You can use this value to simulate a payroll accounting run. Payroll results are determined but not stored on the database).
    Possible values for HR: Statements are:
    E (single record entry)
    S (fast entry)
    A (display when printing statements)
    D (print statement)
    L (delete statement)
    Possible values  for FI Travel Management are:
    R (read),
    W (maintain data)
    A (release)
    B (reserve in Amadeus reservation system)
    C (reserve released trips in Amadeus reservation system)
    Q (create trip template)
    (all operations).
    You can only enter the values 'W', 'A', 'B' and

  • TS2776 i've lost all my entries in my calendar. I was able to call them up with the magnifying glass icon . now it just goes to a search entry. and all my calendar/months have no entries. help please

    i've lost all the entries in my calendar.  i had been able to call them up with the magnifying glass list function, but now it only opens a search function and all my calendars/ entries are blank.  help please

    Lord K.  Thank you. Yes I am within the 90 time period, however I travel Intertionally and I can not receive not make a call to Apple. I was just at the Genius Bar in Chicago and they said, don't worry about it.  It just floats out there, however, I can not recover my messages on a flash drive. I need to go back to my old computer which I don't have with me.  My messages were in folders for a lawsuit.  It is going to take an incredible amount of work for me to, you have no Idea.  We are talking thousands of pages!  I the defendent will have them during discovery so I am not so worried.  However, I can not bring them to him on a Flashdrive when I meet with him without an extraordinary amount of presssure on my part.  THis is not just some little email issue. This is suing EXPEDIA and Tripadviosr.com

  • Batch input help

    HI,
    I wont to avoid message in TR. cne1 .
    when i put project & i remove the V from Processing Options (test run) And Excute i get pop-up with text:
    Actual values can be deleted and i don't wont it (pop-up)
    how can i remove it?
    i try with batch-input but i don't success .
    how i can do that?
    i reward kindly for helping answer .
    Regards

    Hi Ramiro Escamilla ,
    Thanks for your replay i am desperate,
    i try K_ABC_PROGR_DEGREE_FOR_PROJECT
    but it don't exist,
    i find Enhancement GRWTAUTH maybe i can do it in it?
    i don't now to use user exit maybe you can give me direction?
    Best REgards

  • Batch command help ?

    Hi Guys I have this batch file called via ant build script.The batch file has 10 different function .Now i have this requirement to break it into smaller parts.
    Example the functionality should now be broken into three parts
    1)employee data processing
    2)employee working days
    3)employee salary
    4)employee promotion history
    1)employee data processing
    2)employee working days
    3)employee salary
    1)employee data processing
    2)employee working days
    4)employee promotion history
    Problem is absence of OR statment in batch file will force me to write this
    command in separate batch file.(I was trying to put it into one so that I dont have to repeat statments).Basically I was trying to execute target and target will execute the batch file with a parameter,which will then decide which functionality to execute , but in absence of OR is causing me some headache.Not able to decide the best strategy.

    help.Cut it out already.
    We've been nice considering this is a Java forum and not a
    Windows batch file forum.
    Your problem may be that you just dont know enough about
    batch files.
    http://www.robvanderwoude.com/index.html
    http://www.google.com/search?hl=en&q=batch+files+if

  • Showing default input with possible entry help

    Hi all,
    I am writing a BAPI to populate one field ( input/output box )
    I want to attach a F4 help to that i/o box , but in addition to that one specific entry from F4 help should always appear in that box by default .
    i.e. it is the most probable entry which should come by default,
    and only in less cases when user wants to select other entry,
    he should be able to do so thru F4 help.
    Any suggestions plss...
    Thanks,
    Subodh

    Yes,
    actually it is a BAPI for SOA.
    and this is the zoom BAPI.

  • Final Cut Crashes when I try to export a batch list - help!

    I'm doing a very large documentary project and each tape has extensive log notes. I use the batch list function to export tabbed text files and convert them to excel - very useful in the creative process when figuring out story structure etc.
    But now every time I try to export a batch list final cut crashes - any ideas on how to get around this?
    please help.

    Are you batch exporting the enrire project maybe?
    Might try selecting just your capture bins and trying to batch export those. Could be a sequence or graphic file making it go kookoo.
    If the sheer size of it is making FCP choke you could try selecting a single bin and then doing batch export. Do that for all your bins and assemble them in excel.
    Dual 1Ghz G4 Quicksilver   Mac OS X (10.4.7)  

  • Batch entry in process order in Goods receipt tab mandatory

    Hi,
    There is a field in Good receipt tab of process order (AFPO-CHARG). We want to make it mandatory field. Is there any way to do that & it should be dependent on order type-plant.
    regards,
    Mohit

    HI,
    Good receipt tab of process order (AFPO-CHARG
    I think you are asking about batch field for header material.
    If you want to make it mandatory then you can do it by creating screen varient (SHD0).
    You find many online help documents and threads on screen varient, search it over here on sdn or on net also.
    Regards,
    Dhaval

Maybe you are looking for