Massive copy of BW transformation between different source system

Hi all,
in my BW I have different source systems. I have mapped several objects to one source system.
Now I need to copy all the transformation to other source systems. These source system are different instance of ECCs, there are the same extractor in all the systems.
I can't use the BDLS becouse these move the transformations between the system not copy it.
I try to create a Transport and using the Conversion of Logical System Names but this change only the objects with source sytems dependencies, it don't change the technical name of transformation, and do not create a tranformation to the new system but overwrite the existing one.
Do you know if there are some program or some procedure to copy transformation between sourcesystem in BW?
Thanks in advance
Mario

Hi,
you can do a Retrofit (System copy), Generally, retrofit happens between two different BW systems.
check with your basis team if the retrofit is possible with in the same BW system but for different clients.
Note : System copy will overwrite all the objects.
Regards,
Sudheer

Similar Messages

  • How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI

    Hi,
    I just read "How to Reconcile Data Between SAP Source Systems and SAP NetWeaver BI".  While I'm waiting for  more authorisation to r/3 to carry it out and test this functionality.
    I'd like to ask a question to anyone who has implemented this type solution.  On page 10 it talks about creating a view then setting up the datasource. The solution talks about runnig a query.  I suspect when we run a query I would run it for only a period(using variable) to reconcile.
    My question is this.  Will the datasource extractor on /r3 only select the period in our variable or will it do a full selection of the data which would then be passed to BW for filtering?
    Regards

    DEar Mark,
    There are several avenues where you can see and reconcile your data with source system, u can see data in by tcode RSA3 for a datasource, and compare the values with actual document posted into the R/3 system. Respective fuctional consultant canhelp you a lot to confirm the data.
    On BW side u can see the data in PSA and then check tranformations which subsequent change/update/reject data records based on the selective conditions.
    hope this helps.
    Kindly assign the points if it works.
    Revert back if u need futher help/information.

  • Differentiating Master Data from two different source systems

    Friends,
    i have used standard InfoObjects that provide master data for two InfoCubes which take data from two different source systems. Now the some of the master data is identical in both the source systems (example: 10 stands for "Industrial" in one whereas 10 stands for "Agricultural" in the other). What do i do so that the system(BW) differentiates the two.
    Thanks in advance for all the help.
    Mike

    I tried to include the 0SOURSYSTEM in the compounding of this InfoObject (for master data) but it gives me a list of other objects that use this InfoObject as a reference characteristic and also says that this InfoObject is used in a ODS and data needs to be emptied in the ODS before activating  this InfoObject.  Please let me know if there is any way out of it.
    Thanks
    Mike

  • Client copy between different operating systems.

    Hi Experts,
    Our production system is running on HP-UX OS. We are installing a standby quality system and planning to do a client copy to this system from production by taking this into transport domain. But this new system is in windows. So, is it possible to perform a client copy where the source system is HP -UX and target system is windows??
    Regards,
    Amit.

    Hi Amit,
    Follow SAP Note 552711 for client copy. Refer to qns no 4 & 5, which is relevant for your question.
    Can I create client copies in a heterogeneous system landscape?
    Remote copies or client transports can also be carried out between different database and operating systems.
    Regards,
    Debasis.

  • Mixed (Java & ABAP w/different sources) System Copy Failed- NW 7.0 SR3/SP14

    Hello SAP Friends! Our NW admin did a dual stack system copy where the ABAP server came from system 1 and the Java server came from system 2. This worked fine for ABAP (duh it was installed first), but the Java system copy was a disaster. the server started but many key services did not.
    Why?
    Many of the configuration entries were not generated properly. For example, a new, unknown SID was created, and many entries referenced System 1 (the ABAP source, not even the Java source). We were able to find and fix some incorrect config entries, but we still couldn't get all of the services we needed to work.
    I think NW is so complicated that such a configuration is probably impossible, but maybe I am wrong.
    Does anyone have tips? Or can confirm that this would never work?
    The current plan is to install the Java Server from scratch as an add-in, which is less effort than searching through all the config files without any certainty that it will work. Hopefully it will work.
    Many thanks in advance.

    Hi Matt,
    What kind of infos are you looking for? I didn't perform the copy, have just been trying to figure out how to get all of the Java stack's services to start properly. As far as I know, it was done using the standard System Copy wizard. The ABAP server was done as a central instance and then the Java server was copied and installed as a java add-in.
    I have asked the admin to post the details to this thread, but it would be helpful if you could mention what types of info and details you are looking for.
    Thanks and Best Regards,
    John

  • Master Data conflict between different sources

    Hello Experts,
    We have conflict in Master data which is getting extracted from different R3 systems.
    So we have maintained the transcodifiction by adding Prefix ID of logical system ID for the second R/3 system where we have a confict in the Master data. (Say in my case we have this for 0Material, 0Vendor, 0Customer).
    We have done this transcodification at the Transfer rule level by maintaining a routine for both the Attribut information and text information with some codifidition. And its working fine in Production.
    Now we have stuck with the Hierarchy  information for this?
    As in the case of Attr and Text we have option to write a routine at the transfer rule level but we dont have the same for Hierarchy!!!!
    So please guide me as to what needs to be done for the Hierarchy level transcodification. (We are not maintaining this routine at the Object level but we are maintaing this at transfer rule level because of some reasons).
    Help me with the solution!
    Thanks
    Raman
    Edited by: Raman R on Mar 31, 2009 8:04 AM

    Are you maintaining hierarchy manually or loading via flat file ???
    When you maintain you will have access to your transcoded master data hence you wil be able to maintain.
    When you load from flat files you need to maintain it appropriately.
    P.S : Didn't you go with compounding concept of sourcesystem or logsys to separate master data ??
    Edited by: Praveen G on Mar 31, 2009 7:32 AM

  • Modelling the fields in the cube from different source system.......

    Hi,
    I need to create one query on the cube.
    User want some of the fields in the query which are present in diffrent source system , rest of the fields are present in the cube.
    These are master data fields ( 7 fields in total) from other source system.
    Cube gets data from one ODS.
    some steps I need to do are :
    1) create new source system
    2) Create corresponding objects in BW.
    3) Model the things in ODS and cube
    Can somebody let me know what is the best way/steps to model such scenario.
    Thanks, Jeetu

    Hi,
    Replicate both the data sources to BW.
    Create 2 infosources/transformations, map them to respective fields and infoobjects.
    Now assign them to cube and load the data
    hope this helps.
    Rgs,
    I.R.K

  • BEx Integration with different source systems

    Hi All
    I know we can create BEx querys on top of an infoprovider. But instead of storing data into BW and creating reports using BEx tools can we integrate BEx with the other source systems.  Like Business Objects tool which can be integrated with different sources. My client wants to know whether we can integrate with BEx for the following
    Support data source -- SAP BW
    Support data source -- Oracle
    Support data source -- MS SQL Server
    Support data source -- MS Access
    Support data source -- MS Excel
    Support data source -- ASCII Text files
    Support data source -- XML/XSD
    Support data source -- Web Services
    Support data source -- SAP R/3
    Support data source -- BO Universe
    Thanks for letting me know your opinions

    Hi,
    in theory you can. You will still have a virtual provider on top of your Infosource which will be connected to your datasource; thus you'll have to create the structures; you'll have to load master data as well... so not so nice solution if you think that at this stage, the storage will be the less of your costs....
    How are you going to deal with R/3 data?? I mean a great advantage of BW is really when you have an R/3 behind...
    I'd rather consolidate all these disparate datasources using the Visual compsoer which can get this data out of nearly an datasource and merge them in one single report; in theory again you could implement all BEx functionalities but at which cost and effort??
    Weird that a customer is asking such a question because it is usually the other way around: use SAP BW data in another front-end... by the way SAP is going to acquire BO soon....
    hope this helps...
    Olivier.

  • Regarding master data loading for different source systems

    Hi Friends,
    I have an issue regarding master data loading.
    we have two source systems one is 4.6c and another is ecc 6.0.
    First i am loading the master data from 4.6c to bi7.0.
    Now this 4.6c is upgraded to ecc6.0.
    *In 4.6c and ecc6.0c master data is changing.
    After some time there is no 4.6c, only ecc 6.0 is there.
    Now if i load master data from ecc6.0 to bi7.0 what will happen.
    Is it possible ?
    Could you please tell me?
    Regards,
    ramnaresh.

    Hi ramnaresh porana,
    Yes, its possible. You can load data from ECC.
    Data will not change, may be you may get more fields in datasource at r/3 side, but BW/BI side no change in mappings structures are same. So data also same.
    You need to take care of Delta's before and after upgrade.
    Hope it Helps
    Srini

  • Copy Calculated/Restricted Keyfigures between DIFFERENT InfoProviders

    Hello Gurus,
    I am struggling with a problem and there doesn't seem to be any clear help on the web. But maybe you can help me.
    How can one copy a restricted keyfigure from one infoprovider to another different one when all the infoobjects used for the restricted keyfigure are present in both the providers? (multicubes)
    And of course TCode RSZC doesn't work with non-identical infoproviders.
    Thank you very much for your help!
    Marius

    Thank you Cornelia, but this method was clear for me from the begining... it is not an option though... there are about 30 InfoObjects (and another 40 Multiproviders) so there has to be another way. And there is a way because there is an article on BWExpertOnline which describes an easy method (unfortunately this answer is not worth a thousand dollar subscription for me):
    Quick Tip
    Copy Queries Between InfoProviders Painlessly
    by Joerg Boeke, syskoplan AG BEx Analyzer, InfoCubes, Performance, Query, Debug Mode, InfoProvider
    Perhaps, like me, you have spent countless hours successfully creating great queries that contain complex structures for a particular InfoProvider. Then, down the road, you find you need this exact query again for another InfoProvider, but the new InfoProvider has a single characteristic that differs from the one that was the object of your original query. Using SAP transaction RSZC (copying queries between InfoCubes), query definitions can be copied only for use on InfoProviders with the same characteristics. If the key bfigures and characteristics of the new InfoProvider do not match the original 100 percent, this standard method fails.
    So close and yet so far, right? I’ll show you a way, however, to copy the query definition from one InfoProvider to another, regardless of the characteristics of the new target. This method works with both BW 2.x and 3.x installations.
    Source: [http://www.bw-biexpertonline.com/archive/Volume_03_(2005)/Issue_06_(July)/V3I6A2.cfm?session=|http://www.bw-biexpertonline.com/archive/Volume_03_(2005)/Issue_06_(July)/V3I6A2.cfm?session=]
    The above mentioned method handles the copying of queries but when we copy the queries we copy the restricted/calculated keyfigures also.
    Does anybody know this painless method?
    I thank you in advance.
    Marius
    Edited by: Marius Grunca on Feb 12, 2008 6:35 PM

  • Copy/pasting audio regions between different tempo projects

    hi, ran into a strange problem when working on a film voiceover...
    did the recording the other week for a new language version. when done i converted the takes to 48khz as that's the rate in the original logic file. edited together the new, english version cutting and mixing together the best parts of 5 takes. ended up with about 200 nice audio regions in a row.
    what happened is that when i tried to copy the new english version in the old logic project it gets totally screwed up. the reason being (i think) that the new project is 120bpm and the old one 77,7476 (?), which i didnt notice before.
    is there any way i can
    1) paste the 120 bpm stuff into the 77bpm stuff so that it ignores the tempo difference? – now the ends of the regions change, causing sentences to to end funilly, and there a gaps between regions.
    or
    2) change the 120bpm projects tempo to 77bpm without screwing it up?
    or any other solution?
    thanks,
    /r

    Hi Rikard,
    Beforehand, forgive me for any overexplaining I might do. In case of underexplaining, just ask.
    200 regions in a row? On one track, right?
    1) If so, you could simply merge all the audio regions into one fixed file. Select all regions on the track and hit the '=' shortcut. Logic will tell you that it is gonna make a new file. This new file you can then import into the other project. Audio (not loop) files are independent of Logic's tempo. It is just that the bar division doesn't line up with the tempo anymore. But if that is not a problem...
    Also I do not understand why the new project is at 120 bpm? Is there a reason for that, other than that it is the default value when opening an empty project? If not, just set it to the 77 something of the old project. If there is already stuff in your new project and now you want to add your 200-region audio, use method 1). If you change the tempo, two thing change: the tempo of any mioditrack, and the time between audio regions. The audio regions itself will not change.
    regards, Erik.

  • Copying ALV Display Variants between different programs

    Is there a way to copy the ALV Display Variants from one program to another?  I am NOT referring to selection screen variants.
    An SAP standard program was copied to a Z program.  Some changes were made to the logic.  The original SAP program has many (100+) ALV Display Variants.  I do not want to manually re-create them.  Is there a way to copy these from one program to another (without using a custom program to manipulate the tables)?
    Thanks.
    Norm

    Hi norman,
    even i was thinking the same while you passing the alv parameter is_variant, give the the program which is having 100 variants.
    is_variant-REPORT = 'STANDARDPRG'.
    this will import all varaints from it, but when you save any new one it will  save in the same standard program.
    regards
    vijay

  • Copy and Past voiceover between different videos

    I need to split a video into three sections.  I have recorded voice over in the video (appears in the blue boxes under the video clips).  Is there a way to copy those from one video and paste them into another?

    Hi there,
    If all you're trying to do is to move from one video clip to another, dragging will suffice. But if, as I imagine, you're trying to move it to another project, copy/paste won't work on the narration track.
    Find the project file in the Finder, and right click to select "Show Package Contents". This will enable you to see your voice over recordings and from there you could drag and drop 'em onto the new project. After you do such and have your narrations in place, it would be advisable to go into iMovie's File menu and hit "Consolidate Media…" so that your voice overs would be copied and referenced to the current project (should you decide to trash the original).
    Be advised that the newly dragged narration will work as a regular audio track and not as a narration track (you will have to perform the audio ducking manually) and its color will revert to the default "green".
    Hope this helps.

  • Sending e-mails between different SAP-Systems with SMTP

    Hello,
    I want to send e-mails between two different internal SAP-Systems. I already configured SMTP in both systems but ist not possible to send an e-mail from system A to system B.  I've got following error message:
    Cannot process message; no node determined for <sapuser>:
    Thanks in advance & best regards,
    Christoph

    Hi Christoph,
    but it is possible that the email for user from System B is also available in the system itself(transaction so01) and not only in his outlook inbox?
    As the email is sent from System A. It will be available under SOST of system A.
    As user in System B is receiving the email, it will be appearing in users inbox.
    Check with Mail server administrator on where to enable SMTP relaying for IP address of SAP server.
    Hope this helps.
    Regards,
    Deepak Kori

  • Difference between different Technical systems

    Please tell
    We can define a technical system as :
    Web AS ABAP or Web AS JAVA or Standalone JAVA or Third party or
    Exchange Infrastructure
    What is Web AS ABAP system? What is Web AS JAVA system? What is standalone JAVA?
    Thanx in advance
    Harsh

    Hi Harsh
    Web AS ABAP
    Web AS ABAP technical systems, ranging from any SAP system to an APO server or CRM server, are based on the same Basis Component (BC), which includes the ABAP interpreter, ABAP Dictionary, ABAP Workbench, and so on. A dedicated database, which stores most of the data of the BC and the application components, is associated with the system.
    Web AS Java
    Web AS Java systems consist of one or more instances and each instance is installed on a separate host. An instance itself consists of cluster nodes that can communicate with each other.
    Standalone Java
    Standalone Java technical systems are standalone Java applications that are installed in a computer system from an administration perspective. They can also be installed as an operating system service or as a daemon.
    Third-Party
    Third-party technical systems contain third-party software components and products.
    Third-party systems are not automatically registered in the SLD. Therefore, you have to create them manually by creating:
    Third-party products
    Third-party software components
    Third-party technical system
    Third-party business system
    Exchange Infrastructure (XI)
    XI technical systems are the infrastructure systems (such as integration servers and adapter engines) of XI.
    Cheers...
    VAsu
    <b>** REward POints if found useful **</b>

Maybe you are looking for