Massive cursor after picture insert

I have just inserted a picture into single column liquid site and am left with massive cursor which I can not remove. I wish to put text alongside the picture but am prevented from doing so.
I can not see anything in the code which would suggest to someone like me with little knowledge how to remove it or what I have done to cause it to happen. I can type above and below it but not anywhere on the lines occupied by the picture the entire width of thepage. I tried pasting some text there and it still ends up underneath the picture not alongside. Any constructive help would be much appreciated.

Hello Pziecina,
Thanks for taking time to help me. I have just watched a video from Adobe on the different methods of inserting images. Each time the cursor was placed at the begining of a paragraph and in each instance the image was inserted but there was absolutely no text to the right of any of the images. I do not understand how to exactly place anything using only code. Also in many of the tutorials it says just drag the image to position it. I can not drag anything anywhere in my version of cs6. I am only building one site and am not going to give up. I can see from reading the forums and questions being asked that even experienced people have difficulty understanding what is going on.  I have made a half decent blank template page with header nav bar and footer but now can not even start to make the home page until I can fathom how to enter text and images alongside each other. It is so basic but I have read and read about positioning things acurately with code but have not yet found anything that I can understand.Thanks again.

Similar Messages

  • Cursor QueryProblems while inserting data into an external db in OBPM 10GR3

    Hi all,
    I have to call the db and insert a number of records at the same time. About 500 records at a time.
    Whenever I do it, I get the following error after 2 or 3 requests/instances:-
    Caused by: The maximum number of opened cursors has been exceeded in the SQL statement cache.
    Detail:The maximum number of opened cursors can be configured in the external resources SQL configuration.
    Caused by: The maximum number of opened cursors has been exceeded in the SQL statement cache.
    Detail:The maximum number of opened cursors can be configured in the external resources SQL configuration.
    Now, my question is, if I increase the number of opened cursors, what is the impact on the engine performance, instance size and process performance?
    Is there any deadlock that takes place?
    Is it a good idea to increase the number of cursors?
    How do we close the cursors after every db transaction to ensure performance and scalability?
    I use the following Query:-
    String sqlQuery = "INSERT INTO TEST_TABLE(TEST_IDS )VALUES('"+ testIdArg +"')";
    *// set a timeout of 180 seconds on the DDA query*
    *     DynamicSQL.queryTimeout = 100;*
    *     implname = "test_schema";*
    *     items = Fuego.Sql.DynamicSQL.executeUpdate(sentence : sqlQuery, implname : implname);*      
    *What do I change in this query to eliminate db cursor problems?
    *I have to run the same query more than 500 times for each instance? And there can be multiple instances every 30 seconds...
    I tried closing the cursors using Fuego.Sql.DynamicSQL.close(it : items);
    But unfortunately, items is an integer not an Iterator.

    Looks like your system may be under load, or you may be perfroming an insert that is taking longer than 45 - 60 seconds. The DB adapter runs as a synchronous process so if the insert takes longer than 60 seconds you will get timeouts,
    There may be some tuning that needs to be performed. Can you please give me a little more background on the activity that is happen when it errors?
    Are you able to post the full error stack.
    cheers
    James

  • AI CS6/picture insert problem

    See below picture showing, after we insert the picture, the file name should be showed but it didn't.
    This is the problem we faced and can you help us to solve this problem?
    If you are free can you help us to check on line? Please let us know your available time go on skype or any ...
    Thanks. Waiting your reply soon.

    I used File>Place and unckecked the link box and Embed *.psd,the file name should be showed but it didn't.
    But if I used File>Place and Embed *.jpg and *.tiff files, the file name can showed...

  • Black or blank screen with blinking cursor after entering Windows password

    This document pertains to all HP computers and tablets with Windows 7 and Windows 8 (8.1).
    You can also link directly to this document at this URL
    http://support.hp.com/us-en/document/c04572861 
    Use the following steps if your computer stops at a black screen with a blinking cursor after entering the Windows password.
    On the black screen, press Ctrl, Shift, ESC to open the Task Manager window.
    note:     If the Task Manager window does not open, see Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    Click the Process tab.
    Look for one or both of the following tasks:
    Run Once Wrapper
    Run Once Wrapper (32-bit)
    Right-click the task, and then click the End task button. Windows should start normally.
    On the Windows 8 start screen type Control Panel then click Control Panel in the search results. In Windows 7, click Start then type Control Panel, then click Control Panel in the search results.
    From the Windows Control Panel, go to Programs and Features or Add/Remove Programs.
    Remove any of the following programs. Additionally, remove any other suspected programs that are not listed.
    Remove these suspected programs:
    Binkiland
    SevenZip
    Unchecky
    Image Repair
    SolutionReal
    Vosteran
    JetClean
    Speed Browser
    Web Bar 2.0.5273.16044
    mypcbackup
    Speed Checker
    Wincheck
    Omega Plus
    Spy Clear
    Word Proser
    Optimizer Pro
    Spyware Clear with PC Tech Hotline
    WSE_Binkiland
    Pepper Zip
    Storm Watch
    WSE_Taplika
    Pro PC Cleaner
    Strong Signal
    WSE_Vosteran
    Safe Search
    Taplika
    To resolve all other black/blank screen issues at boot, see Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot.
    To resolve virus and malware issues, see About Spyware, Adware, and Browser Hijacking Software and Using Windows 8 Defender to Prevent Virus and Spyware Problems
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    This is not what happens.  The screen goes black, no curser or anything, then it comes right back on to the same page I was on when it went out.  It doesn't happen when I login, it happens as I am on a webpage or playing a online game.

  • Hp Pavilion 23 Blank Screen With Mouse Cursor After Hp Logo (Not Windows Logo)

    Hello my computer wont start up all i get is a black screen but i have a mouse cursor. after a little bit the computer will restart and do a automatic repair but nothing happens it just keeps on rebooting. i tired to do a bio update but it seems to not be working. there is no option in the bios to update or even in UEFI. i also did a harddrive test and got a Short DST Check fail (FAILURE ID: 909HVX-0007K0-WPU2XF-60WH03) but i still can get access to the harddrive using a Linux LiveUSB and all files are there. (Product Number Is : H5P60AAR#ABA)

    It is possible to receive a false DST check but not common.
    It doesn't mean your hard has failed but that it is in imminent danger of failing.
    You can try again but this time using the Extended DST test.
    But before doing anything I suggest you back up all your important data using that live Linux boot disk just in case.
    Every hard disk manufacturer has their own diagnostic boot cd/usb. Google it.
    You should create one and run it for your brand hard drive.
    You should be able to determine which brand you have from the BIOS/UEFI hardware tab.
    While your'e in there double check that your boot priority is set to hard drive first.
    Your other issue seems to be the dreaded 'Automatic Repair Loop' which could be caused by your possibly failing hard dirve. I would fully diagnose the hard drive first.
    Here's a link with several suggested fixes. Some of them require a Windows 8 boot disk, other do not.
    Automatic Repair Loop Fixes
    If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

  • Avoid Commit after every Insert that requires a SELECT

    Hi everybody,
    Here is the problem:
    I have a table of generator alarms which is populated daily. On daily basis there are approximately 50,000 rows to be inserted in it.
    Currently i have one month's data in it ... Approximately 900,000 rows.
    here goes the main problem.
    before each insert command, whole table is checked if the record does not exist already. Two columns "SiteName" and "OccuranceDate" are checked... this means, these two columns are making a unique record when checked together with an AND operation in WHERE clause.
    we have also implemented partition on this table. and it is basically partitioned on the basis of OccuranceDate and each partition has 5 days' data.
    say
    01-Jun to 06 Jun
    07-Jun to 11 Jun
    12-Jun to 16 Jun
    and so on
    26-Jun to 30 Jun
    NOW:
    we have a commit command within the insertion loop, and the each row is committed once inserted, making approximately 50,000 commits daily.
    Question:
    Can we commit data after say each 500 inserted rows, but my real question is can we Query the records using SELECT which are Just Inserted but not yet committed ?
    a friend told me that, you can query the records which are inserted in the same connection session but not yet committed.
    Can any one help ?
    Sorry for the long question but it was to make u understand the real issue. :(
    Khalid Mehmood Awan
    khalidmehmoodawan @ gmail.com
    Edited by: user5394434 on Jun 30, 2009 11:28 PM

    Don't worry about it - I just said that because the experts over there will help you much better. If you post your code details there they will give suggestions on optimizing it.
    Doing a SELECT between every INSERT doesn't seem very natural to me, but it all depends on the details of your code.
    Also, not committing on time may cause loss of the uncommitted changes. Depending on how critical the data is and the dependency of the changes, you have to commit after every INSERT, in between, or at the end.
    Regards,
    K.

  • How do I fix the gray screen and non responsive cursor after iMac sleeping?

    How do I fix the gray screen and non responsive cursor after iMac sleeping?

    If you're running OS X 10.8.5 or earlier, then from the menu bar, select
     ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
    Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
     ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.

  • Execute_query after on-insert trigger

    Hello.
    I use on-insert trigger to insert data into database and then i want to execute_query so i can see all records including the last one i inserted.
    How can i workaround the problem with using execute_query or go_item in (or after) on-insert trigger?
    Thanks.

    Hi,
    you cannot execute navigational or query built-ins when in a transaction control point (ON-INSERT).
    ON-, KEY triggers replace the functionality of the events they fire upon.
    You can use the KEY-COMMIT Trigger to do this. For instance:
    <<KEY-COMMIT>>
    Commit_Form; -- all validation triggers are fired
    -- WHEN SUCCESSFUL
    Go_Block ('BLOCK_NAME');
    Execute_Query;
    Go_Block ('STARTING_BLOCK_NAME');
    -- END KEY-COMMIT
    Regargds,
    Hans

  • After record insertion error!! Help please!!

    I get this error after I insert fields into database.
    Error Executing Database Query.
    Syntax error in INSERT INTO statement.
    The error occurred in D:\Hosting\derekwit\more.cfm: line 100
    98 : <cfelse>
    99 : NULL
    100 : </cfif>
    101 : )
    102 : </cfquery>
    SQL INSERT INTO DBTANGLEWOOD (First, Last, Industry, Title,
    Company, Address1, Address2, City, State, Zip, Country, Phone, Fax,
    Email, SiteInterest, TimeFrame) VALUES ( NULL , NULL , NULL , NULL
    , NULL , NULL , NULL , NULL , NULL , NULL , NULL , NULL , NULL ,
    NULL , NULL , NULL )
    DATASOURCE derekwit_accesscf_TanglewoodDB
    VENDORERRORCODE 3092
    SQLSTATE  
    Resources:

    It doesn't look like the query is inserting any values other
    than NULL. You may want to look into that.
    Some of your column names may be reserved words. For example
    FIRST and LAST. If those are reserved words for your db type,
    either rename the columns permanently (recommended) or escape them.
    The escape syntax is db dependent.
    Access or MS SQL use square brackets around the name:
    [ColumnName]
    MySQL try back tics: `ColumnName`
    ...

  • Why does My video flicker grey after I insert a pic in a transition

    Simple as my question title. Can't figure out why my video flickers grey after I insert a pic into a transition. Any help would be greatly appreciated

    I actually found out its an issue that alot of folks are having and it has nothing to do with the "pic in transition thing I was talkin about." Sorry I'm no good with all the technical terms. But it's a gray flicker that appears in the playback, I found a thread that believed it was a graphics card issue or an issue with quicktime?
    https://discussions.apple.com/thread/1409884?start=0&tstart=0
    Link can describe it better than I

  • EPMSaveComment after EPM Insert Member does not work?

    Hello,
    I have situation in report where I use EPM Insert Member and also EPMSaveComment.
    After new members are inserted, existing comments are blanked and Save data after that update exsisting comments with blank values
    Detail steps:
    Open Excel and log on to BPC-NW Environment / model
    Create a report selecting a dimension ACCOUNT on the row axis and TIME dimension on the column axis.
    Choose Remove Empty and Zero Values for Rows
    Add two local Members on the both following columns as follows:
    column x: add local Member 1 and leave formula blank
    column y: add Local Member 2 and enter an 'EPMSAVECOMMENT' formula which references the column in 'LocalMember1'
    Insert Member and enter some values and also comment.
    Save and Refresh data.
    Insert Member
    The comment will disappear from the LocalMember1 (column x).
    Questions:
    Is it possible to have Insert Member and EPMSave Comment in same Report?
    Fact (documentation EPM Add-in 32.28): EPMSaveComment function is executed (only) when you Refresh the worksheet.
    But Insert Member function does not Refresh the report in such way that comments with EPMSaveComment function are displayed? They are blanked instead.
    If report is refreshed before Save Data then inserted members are deleted because they dont have values
    If data is entered for inserted members than with Save Data also previous comments are changed (with blank), because they are different in input screen that those saved before?
    If columns for comments are only added in Excel, so that they do not belong to Report, then comments do not dissapear from "blank" column….
    … and function EPMSaveComment in second column still save comments
    But in that case after Insert Member function outside Report is not available automatically in inserted row
    Also if EPMCopyRange is used instead of LocalMembers the situation - dissapearing existing comments when inserting member - is the same
    There is similiar situation with Expand and Insert Member functionality explained in Note 1936111 where SAP states that Refresh is needed?
    Best regards,
    Nevenka Ribnikar

    Hello,
    thanks for you suggestion, I will also wait for answer from SAP.
    I will post details again:
    LOCAL MEMBERs in REPORT:
    EPMSaveComment(EPMMEMBER(000), , EPMDIM_CURRENT_MEMBER(ACCOUNT), )
    After EPM Insert Member
    Comments in column »enter« dissapear
    In documentation EPM Add-in 32.28 is written: EPMSaveComment function is executed (only) when you Refresh the worksheet
    For new inserted member values and comment can be added, but also other comments will be changed to blank values…
    If only values are changed and Save Data without Refresh,
    then comments are still in column »enter«
    If I use columns out of the report than as mentioned, if new members are inserted at the end there is no formula for comment...
    Thank you for your answers, I was worried that there is some simple solution...
    Does anybody has some real project experience with SaveComments and InsertMembers in same reports?
    Best regards,
    Nevenka

  • Trouble with photos rendering after transitions inserted

    I'm having trouble in general with the program running slow and stuttering. But my biggest problem is that after I insert a transition, the photo (with ken burns effect) doesn't re render itself. so after the transition, the movement of the photo skips back to it's original start position. When I try to view the photo settings, all I see is black.

    Welcome to discussions, Cheryl;
    Updating Ken Burns stills works only until you empty the trash in iMovie HD 6.0.2:
    http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#stillupdate
    Sue

  • UpdateAllContainers() not working after i insert inlinegraphicelement

    Hi
    Please find the attached flex project. Its a basic editor. After i insert image to my editor it does not show this but a space is covered by image. after i edit by delete or update my text image shows up. Please help what is missing
    Thanks & Regards,
    Imran

    Perhaps you are missing the event that updates when the graphic has been loaded?
    Here is some example code that works:
    package
        import flash.display.Sprite;
        import flash.events.Event;
        import flashx.textLayout.container.*;
        import flashx.textLayout.elements.*;
        import flashx.textLayout.events.StatusChangeEvent;
        /** Hell world text example with an inline graphic */
        public class InlineGraphic extends Sprite
            private var _textFlow:TextFlow;
            public function InlineGraphic()
                _textFlow = new TextFlow();
                _textFlow.fontSize = 48;
                var p:ParagraphElement = new ParagraphElement();
                _textFlow.addChild(p);
                var span:SpanElement = new SpanElement();
                span.text = "Hello ";
                p.addChild(span);
                // InlineGraphicElement has "auto" width/height so the size can't be calculated till the graphic is loaded
                var inlineGraphic:InlineGraphicElement = new InlineGraphicElement();
                inlineGraphic.source = "http://www.adobe.com/shockwave/download/images/flashplayer_100x100.jpg";
                p.addChild(inlineGraphic);
                var span2:SpanElement = new SpanElement();
                span2.text = " World";
                p.addChild(span2);
                // event sent when graphic is done loading
                _textFlow.addEventListener(StatusChangeEvent.INLINE_GRAPHIC_STATUS_CHANGE,graphicStatusCh angeEvent);
                _textFlow.flowComposer.addController(new ContainerController(this,400,200));
                // this call compose but the graphic hasn't been loaded from the source URL yet.
                // The actualWidth and actualHeight are zero. 
                _textFlow.flowComposer.updateAllControllers();
            private function graphicStatusChangeEvent(e:StatusChangeEvent):void
                // if the graphic has loaded update the display
                // actualWidth and actualHeight are computed from the graphic's height
                if (e.status == InlineGraphicElementStatus.READY || e.status == InlineGraphicElementStatus.SIZE_PENDING)
                    _textFlow.flowComposer.updateAllControllers();

  • I had a Singapore SIM in my Iphone 4S and now i'm in Hong Kong.  After I inserted Hong Kong SIM, the playlists in My Music got changed to Chinese characters from English.  How to change it back to English?  My language setting is only English

    I had a Singapore SIM in my Iphone 4S and now i'm in Hong Kong.  After I inserted Hong Kong SIM, the playlists in My Music got changed to Chinese characters from English.  How to change it back to English?  My language setting is only English

    What you have mentioned happen to me. I posted new stuff just now. https://discussions.apple.com/thread/4450344

  • HT4972 I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after up

    I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after update.
    Kindly update me on this whether I need to update this or not.

    Try a Hard Reset.....
    Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds.  Ignore the swipe to turn off message.

Maybe you are looking for