Massive Framerate Drop after 10.9.4 update

I have just updated to the latest version of os x mavericks last night and this morning I discovered a massive framerate drop across the whole system. When i enter launchpad I can see the frames refreshing as I swipe, and all of my games are now unplayable as it runs at 1 or 2 fps. Any solutions? i have a 2012 macbook pro.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

WiFi keeps dropping after 10.4.7 update! Is this an isolated incident?

I have no clue what causes this but what I can swear by is that this shlt started happening right after I applied the update. It seems as though when it is in use it is ok but when it is idle it drops connection. I had a black MacBook which was plagued by the same problem. I returned it and upgraded to the MacBook Pro which worked beautifully up until I installed 10.4.7. Anyone have any suggestions?

YUP!
Go with Lincoln's suggestion... the Coconut Wi-FI solution. I use Coconut and have not dropped a connection for a good while.
** Here's a twist to the dropped connections saga: Just for kicks, I stopped using Coconut Wi-Fi to see what would happen; and lo and behold, still NO dropped connections (Ya, it's weird, in a GOOD way, but what the heck is going on?).
So I reviewed all my network Airport settings and noticed that somehow a "$" symbol has appeared in front of my WEP password. Don't know how it got there - I think Coconut Wi-Fi might have put there.
Don't know what the "$" symbol in front of my WEP password means or is intended to do. All I know is that since using Coconut Wi-Fi (and then stopped using it) the dropped connections have ceased in a big way.
So, I'm thrilled with this work-around.
MacBook Pro 15" 2.0 GHZ Mac OS X (10.4.7) Serial W8612xxxxx

Framerate drops after a while

hi there,
my framerate in crysis/crysis warhead and bioshock drops noticable after about an hour of playing. i use vista64 on a mbp 2.6.
does anybody have some suggestions?
regards.

hi there,
my framerate in crysis/crysis warhead and bioshock drops noticable after about an hour of playing. i use vista64 on a mbp 2.6.
does anybody have some suggestions?
regards.

TS3899 Secondary email account dropped after updating iPad to iOS 6. How can I retrieve it?

Our secondary email account was dropped after I updated my iPad to iOS 6. How can I retrieve it? It still shows on my husband's iPad which I haven't updated to iOS 6 yet.

Please cancel this request for assistance. I just fixed it myself.

HT202639 I have updated iOS to my 4S. My Wifi still continues to drop after being checked out. What do i do now?

I have updated iOS to my 4S. My Wifi still continues to drop after being checked out. What do i do now?

I'm not sure what you mean by "checked out." See: If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support

Massive battery drain issues after the latest software update - phone hot

After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck.

Bluetooth dropping after update to 10.6.8

The bluetooth connection between my Nokia BH-908 headsets and my mac mini periodically drops after I upgraded to 10.6.8.   Restarting blued daemon via Bluetooth Explorer does not fix the problem; I have to reboot the computer to restore the connection.   I've tried resetting the System Management Controller (SMC) and I attempted to delete the device and re-pairing it. Neither of those things worked, the headset sill drops periodically.    This is what the kernel logs say when the device drops:
Aug 8 07:01:41 kernel[0]: E:[AppleUSBBluetoothHCIController][BulkOutWriteCompleteHandler] ERROR2: 0xe0004006; sizeRem=00000059; isInactive = 0, suspended = 0
Aug 8 07:01:41 kernel[0]: E:[AppleUSBBluetoothHCIController][SendACLData] Bulk out [ACL] data failed. (error = 0xe000404f )
Aug 8 07:01:42: --- last message repeated 20 times ---
Again, this only started happening after I upgraded to 10.6.8.   Any suggestions for resolving this issue?

It was a good suggestion, but unfortunately that didn't solve the prolem.   Here's the Bluetooth Exploer actions I tried:

Can't drag and drop after update

can't drag and drop after update

hi Dustin, maybe with a bit more info someone will be able to help with this:
what Mac OS System version are you using?
what is it you are 'dragging and dropping'? : Is this drag and drop of text in InDesign? Or are you dragging and dropping from the Mac OS (e.g. a file from a folder) into InDesign?
If you are referring to drag and drop from OS into InDesign: I'm thinking this 'might' be a Mac OSX issue. If you look over at https://discussions.apple.com/index.jspa there seem to be plenty of issues with drag and drop across different OS versions.
Next time it stops working whilst you are in InDesign, does it still work in other programs? That is one way of determining if this is caused by InDesign or the operating system. If it is the OS, my guess is that it stops working in other applicaitons as well.
Hope this helps,
Cari
twitter: carijansen
facebook: carijansen.au

MSI GT683r Massive fps drop (CPU overheating)

System Information:
http://www.msi.com/product/nb/GT683.html
OS: Windows 7
Brand: MSI GT683R-242
CPU: intel quad core i7-2630QM @ 2.00 GHz
GPU: Nvidia GTX 560M 1.5 GB GDDR5
RAM: DDRIII 16GB(4GB*4)
HDD: 1TB (500GB*2 RAID 0)7200 RPM
Hello, I'm having a lot of problems with my cpu temperature being high especially when gaming and this results in getting intermittent FPS drops when gaming. My fps when gaming drops to about 10fps (this doesn't necessarily happen when I'm in a particular FPS intensive condition either, could happen when I'm just walking around in the world). I've noticed my CPU temperature is close to 90 degrees when this occurs (I realize it's due to the core temperature being too high). It shouldn't matter what game since I should not get these FPS problems with a laptop like this but the game I play is a MMORPG called Rift.
After playing Rift for about 1 hour and a half mainly in pvp battlegrounds (15 players per team in the battleground so a total of 30 players), my core temp for my cpu reach the high 80 degrees and I’ve received 4-5 massive fps drops while playing during this time. I was able to screenshot my FPS during the FPS drops and I obtained a few screenshots while playing in game. See screenshots below.
NOTE1: CPU core Temperature is shown in the upper right of the screenshots, the running processes from the task manager is also shown in most of these screenshots.
NOTE2: I play with the native resolution of my laptop 1920 x 1080. I normally play windowed full screen but I include the CPU core temperatures & Task Manager so it wasn't window full screen. Also, I did not have the Turbo and the Nvidia Overclock Tool activated but I've tried both in the past and have not noticed a noticeable difference in my FPS drops while using them. (I also get FPS drops while using the Turbo and Nvidia Overclock Tool).
NOTE3: I play the game with medium settings to try to alleviate this FPS problem but I've had FPS problems still happens even in low settings.
After restarting my computer my idle temperature on all my 4 cores according to core temperature sits around 45 degrees (fluctuation + / - 2 to 3 degrees) with practically no processes running (close to 100k memory in the task manager processes).
When loading up Rift and being IDLE in town my cpu temperature fluctuates between 50 and 61 degrees. CPU usage in task manager fluctuates between 10-16%.
My Normal FPS in a combat environment playing Rift (fluctuates a little obviously but it's usually in the 25 FPS range), FPS can be seen on the bottom right of the Rift client (performance area)
FPS drop result after CPU temp overheating, FPS can be seen on the bottom right of the Rift client (performance area). The CPU temperature was in the high 80's before this FPS drop.
CPU temperatures while idling in town after a battleground (I also get FPS drops in town and dungeons as well but usually not as frequent as I do in a battleground or in Raids)
CPU temperatures while killing a boss in a raid, there were probably about 100 players in the environment, I had a huge FPS drop just after taking this screenshot
I also took a Screenshot of my core temp about an hour after I stopped playing, My CPU temperature was constantly fluctuating between the low 60's to high 70's when my computer only had a few processes running.
I've looked around for a solution for this problem but I can't seem to find one. I haven't physically opened my laptop to check if there's an issue inside but I've only started having this FPS problem since about 2 months. I had no FPS problems until recently.
Not sure if it matters or not but my NVIDA driver version is 296.10. I've tried reverting to the previous driver to see if this latest driver update was the problem but it didn't change anything. Other things I've tried is changing some settings in the NVIDIA control pannel but this has not worked either. I've even tried playing my game on the lowest settings and still had intermittent FPS drops. I've browsed through the forums and some people have suggested flashing the BIOS but I'm a bit skeptical to do that. I also attempted to call MSI customer support and left a message but they have not returned my call yet. Anyone got any suggestions to fix this problem?

The simple solution is to open the bottom and blow out the air through the center of the fan with canned air. The vents arent plugged but the fan itself probably looks like a fuzzy mop. Shoudl fix your problem and will not void your warranty.
The ideal solution is to pop the heatsyncs of the CPU and GPU, replace whatever crap their using with artic silver and appreciate a refined machine. Not only will you not have overheats but your machine will use its fan less and thus be quieter. This WILL void your warranty... but its worth it. Just dont do it unless you are savy.
Other then that. Lifting the laptop off the ground is ESSENTIAL. Look at the bottom. It has vents. Ask yourself.. "Self.. what could these vents possibly be for?" Self will hopefully reply "Well Self, I would say they are there for cooling." "SO self these vents have a purpose???" "Yes, self, they do. Their purpose is cooling and airflow" "Well then why do we not have airspace allowing air to actually get into these vents?" "Because self.. we like it flat.... Like a tire thats soon to be on fire..." Hopefully after that your enlightened self will go get a stand. If you want the lowest profile you can get you need a thin cooler system, if you dont care about that just buy a stand that permits airspace and flow. I mean your running an advanced gaming rig. In a normal box these components may have 4+ fans... Your laptop has one. Help it out.
The good news is perhaps cooking your cpu will have a burn in effect and make it clock to higher speeds... However I doubt it. Chances are you are cooking everything from said chip to your HDs and you should stop, because that MIGHT void your warranty.

Firefox 4 does not work on my G5. After prompting me to update from previous version I am now left with nothing functioning. How do I go back?

After downloading the latest update Firefox kindly told me I should upgrade to V4. So I did. I downloaded it, dropped it into my applications folder and overwrote the old version. Only to be told when attempting to start the application "Firefox does not work with this architecture".
Brilliant. So I look for an older version on the site, and there is nothing to be found. Just the insistance that I should download version 4 for my Mac. Well, "IT DOESN"T WORK GUYS!"
Now can we have a fix please quickly or a link to the older version, as I am now left without all my bookmarks or passwords and you are about to effectively isolate a section of the computing community from ever using you again.

For your toolbars that you had installed before, are they simply incompatible with the latest version of Firefox?
Please try reading [[Add-ons are disabled after updating Firefox|Add-ons are disabled after updating Firefox]], as that may help with your addons.
As for Firefox running slow, is it slow lading web pages, or is just the whole browser slow? Try reading [[Firefox is slow|Firefox is slow]] , which may have some tips (the optimize Windows part especially).

Drobo not working after 10.5.8 update

My drobo stopped working after 10.5.8 update. Now I lost all my data on the drobo. this doesn't make me happy.

'We are using the USB interface (as opposed to firewire) because we want to share the drive across the network - it's not always about speed.'
This makes absolutely no sense to me.. but maybe I am wrong : Because firewire is much more reliable than USB and manages to keep highest transfer rates (without jumping up and down as USB would do as soon as I/Os go up...) Especially on a Mac ! (only for the latency I am not too sure, but I guess it is similar on fw and USB.. just increase the caching if you stream hd movies on the network...
From my experience, sharing a USB drive on the network is probably much worse.. you can find example on the web.. (Orb, Plex and else will start drop frames when connecting to a USB shared drive.)
I currently use my drobo plugged to my Mini with a fw800 to 400 cable,4*1.5tb hdds, I also share it on the network with gigabit ethernet, and get much better performances than any usb shared drive.
Sorry I do not have any precize measurement, but I can upload or download a 6tb file in about 10minutes over gigabit ethernet, and I guess the bottleneck is now the Drobo controller...
The protocol you use may have an impact as well (afp, smb,...) but whatever you use, I suppose Firewire will be faster.
As a general advice, do not update or upgrade anything in general before you have a backup of your data, this is true for any storage system, Drobo or not.
Oh, and Data redundancy on a raid is not a backup of course.
Vincent
Message was edited by: v1ncen7

Wireless Connection drops after a few moments

Hello everbody!
Background: I have a cheap laptop with a windows only ACPI module, so I have to set acpi=off at all times anyway. I tried Ubuntu, which has the wireless problem too, but instead of repairing something bloated like Ubuntu, I now found my way to Arch to make it right from the beginning.
If the wireless problem gets solved, I want to go on installing the nvdia driver, maybe configure xmonad. (I want to try KDE4 for fun too though, eyecandy you know ) Simple working desktop without getting my laptop heated up like windows does.
The problem: I set up my wireless connection like the wiki says:
-The original SSID was "FRITZ!Box Fon WLAN 7270 Annex A" which I tried to escape with \ and using 'ssid'. This wouldn't work at all, if you have any explanation for that I'd love to know it. I changed the SSID to something without spaces and special characters and the connection would work. But it would be nice to change it back to the original.
-So it works now. Fine, I thought. But the connection drops after a few moments and I have to "killall wpa_supplicant dhcpcd" and start them again to make it work again. For a few moments only. So I went through the logfiles and found error messages which Google wouldn't help me solve on my own. Now I'm asking the Arch specialists here
Note: Using the partedmagic livecd, the wireless connection works out of the box and absolutely stable. I believe even a bit faster than under windows. So it has to work perfectly, I just don't know how to make it in Arch yet.
Wireless encryption: WPA2 (CCMP)
lspci | grep -i net
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
05:00.0 Network controller: Ralink corp. RT2860
wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
ssid="fritztest"
scan_ssid=1
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=Passwort
starting wpa_supplicant with -dd to show how the connection auths:
Trying to associate with ma:ca:dr:es:se:bb (SSID='fritztest' freq=2457 MHz)
Associated with ma:ca:dr:es:se:bb
WPA: Key negotiation completed with ma:ca:dr:es:se:bb [PTK=CCMP GTK=CCMP]
CTRL-EVENT-CONNECTED - Connection to ma:ca:dr:es:se:bb completed (auth) [id=0 id_str=]
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-TERMINATING - signal 15 received
lsmod
Module Size Used by
usbhid 32582 0
hid 59859 1 usbhid
uvcvideo 54388 0
videodev 34611 1 uvcvideo
v4l1_compat 13478 2 uvcvideo,videodev
snd_hda_codec_realtek 186046 1
joydev 7378 0
rt2860sta 498204 0
snd_seq_dummy 1067 0
snd_seq_oss 24984 0
snd_seq_midi_event 4484 1 snd_seq_oss
snd_seq 41656 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4349 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33442 0
snd_mixer_oss 14356 1 snd_pcm_oss
snd_hda_intel 19249 0
snd_hda_codec 59723 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4752 1 snd_hda_codec
snd_pcm 57767 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15629 2 snd_seq,snd_pcm
snd 42562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5017 1 snd
snd_page_alloc 5873 2 snd_hda_intel,snd_pcm
ohci_hcd 19405 0
ehci_hcd 31420 0
usbcore 119796 5 usbhid,uvcvideo,ohci_hcd,ehci_hcd
i2c_nforce2 4780 0
i2c_core 14855 2 videodev,i2c_nforce2
psmouse 50729 0
shpchp 26528 0
pci_hotplug 23303 1 shpchp
sdhci_pci 5466 0
sdhci 13959 1 sdhci_pci
mmc_core 45599 1 sdhci
led_class 1997 1 sdhci
forcedeth 47287 0
serio_raw 3618 0
evdev 6716 0
pcspkr 1347 0
sg 20820 0
rtc_cmos 7546 0
rtc_core 11851 1 rtc_cmos
rtc_lib 1482 1 rtc_core
ext4 302709 1
mbcache 4278 1 ext4
jbd2 63651 1 ext4
crc16 1041 1 ext4
sd_mod 25215 3
sr_mod 13097 0
cdrom 31305 1 sr_mod
ahci 29826 2
libata 138071 1 ahci
scsi_mod 79436 4 sg,sd_mod,sr_mod,libata
rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!rt2800pci !rt61pci !rt2x00pci !rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
iwconfig in the few moments the connection works
wlan0 Ralink STA ESSID:"fritztest" Nickname:"RT2860STA"
Mode:Managed Frequency=2.457 GHz Access Point: ma:ca:dr:es:se:bb
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:some-key
Link Quality=96/100 Signal level:-56 dBm Noise level:-81 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
because the wiki says the driver is in the kernel, I also looked at the kernel log which has weird errors:
Jun 7 02:31:49 arch kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jun 7 02:31:49 arch kernel: 1. Phy Mode = 0
Jun 7 02:31:49 arch kernel: 2. Phy Mode = 0
Jun 7 02:31:49 arch kernel: RTMPSetPhyMode: channel is out of range, use first channel=1
Jun 7 02:31:49 arch kernel: 3. Phy Mode = 0
Jun 7 02:31:49 arch kernel: MCS Set = 00 00 00 00 00
Jun 7 02:31:49 arch kernel: <==== rt28xx_init, Status=0
Jun 7 02:31:49 arch kernel: 0x1300 = 00073200
Jun 7 02:31:55 arch kernel: ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2120
Jun 7 02:31:55 arch kernel: ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
Jun 7 02:32:47 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:32:57 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:07 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=1!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=2!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=3!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=4!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=5!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=6!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=7!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=8!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=9!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=10!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=11!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=12!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=13!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=14!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=15!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=16!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=17!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=18!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=19!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=20!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=21!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=22!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=23!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=24!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=25!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=26!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=27!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=28!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=29!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=30!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=31!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=32!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=33!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=34!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=35!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=36!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=37!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=38!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=39!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=40!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=41!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=42!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=43!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=44!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=45!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=46!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=47!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=48!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=49!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=50!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=51!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=52!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=53!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=54!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=55!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=56!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=57!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=58!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=59!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=60!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=61!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=62!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=63!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=64!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=65!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=66!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=67!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=68!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=69!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=70!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=71!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=72!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=73!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=74!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=75!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=76!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=77!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=78!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=79!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=80!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=81!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=82!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=83!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=84!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=85!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=86!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=87!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=88!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=89!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=90!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=91!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=92!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=93!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=94!
Thanks in advance to anyone helping me! I really really want to get Arch going. It's ideal for this laptop, no wasting of disk space, ressource friendly, the temperature doesn't go up as much with less cpu usage I guess..
I've written quite a bit, but hopefully this makes it easier for you to help me! I've included all I thought which could be useful.
Greetings from Germany,
Fenris

The easiest solution might be to setup NetCfg somehow with your wifi card and access point. Have you tried that? Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware. Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.) Those are two places where I'd look for good information.
By the way, your rc.conf is way out of date. You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

Framerate drops when viewed online

I made a simple text animation in Flash for an HTML intro
page. The
framerate was at 40 fps but when the client viewed it he
asked if it could
be a little faster. So I just increased the framerate to 60
fps and it
looked fine in Flash. I took it into Dreamweaver and dropped
it in a blank
HTML page and it looks right when you preview it inside of
Dreamweaver via
the properties panel. When I uploaded the files to a server
to view on the
internet the framerate drops. I tried pushing the framerate
to 80 fps and
the animation played faster after uploading to a server, but
it still wasn't
80 fps. Any ideas why this is happening?

First, you can't guarantee the frame rate in Flash. It's all
dependent upon several factors, the main one being the ability of
the viewer's computer's processor to handle it. You almost never
get a consistent frame rate in any Flash animation.
Second, SWFs almost always play slower when placed in an HTML
file. Don't ask me why. I don't know.
Finally, taking into account that you're asking a computer to
do all that processing, increasing frame rate to 80 actually SLOWS
the playback. You're telling the processor to do 80 changes per
second rather than, say 20. It's a lot more work for the processor,
even if it's only text. 80 is way overkill. The fastest framerate
that is used is rarely more than 60, and that's nearly always in
files that are light on graphics and using lots of scripting. 15 to
30 fps is more the normal range for most web animations. Some claim
31 is ideal. There is a lot of divided opinion on what is "best".
Try it out. I wouldn't be surprised if you decrease the frame
rate to 20, it will play back faster on your client's computer than
the 80 fps version. He may have an older computer that has 50
things multitasking at once.

How do I get the contact photo to full screen size when receiving a call after iOs 7.1 update..?

how do Iget the contact photo to full screen size when receiving a call after iOs 7.1 update..?

I went to the link. I selected iPHONE. There was a big iPhone icon above the comment box -- so I was absolutely, positively on the right page. I spent five minutes or so crafting a constructive comment as to why I wanted the full photo feature back on incoming calls on iOS7. Then...i noticed the box below the comment area asked 'What operating system are you on?'. And the drop down selection list included every operating system since Job's garage days -- but not one single iOS entry. No iOS entries on an iphone page. Unless I'm missing something, I think anyone writing a feedback comment is wasting his/her time.

TS1398 Our work connection to WPA-Enterprise now drops after about 5 minutes.

The wifi now has to be constantly reconnected. This only started happening after the IOS 6 update. Is nobody else experiencing this?

It turned out the problem apparently was that Apple dropped support for TKIP encryption. My problem was just with WPA\WPA2 Enterprise authentication. By replacing TKIP with AES the problem went away. I don't know if this was an undocumented change but a lot of users have been effected.

Massive Framerate Drop after 10.9.4 update

Similar Messages

Maybe you are looking for