Massive problem with audio interface

Hi there.
I recently bought a brandnew iMac 27" Haswell i7. I encountered problems with my Focusrite Scarlett 18i8 audio interface. These are buzzing, clicking and noise immediately or after 3 minutes or so. I tried everything, re-installed the driveres several times, nothing, really nothing worked.
Then I bought an RME Babyface audio interface - and guess what? It's the same problem. I also have a massive sound noise after some minutes or the recording channel in Garage Band drops completely.
What is wrong here? I already tried using a different power plug, tried all USB ports, turned off WiFi, HDD sleep mode, etc. Nothing worked.
Do you have an idea?
I appeciate your help,
Adrian.

same problem with my imac late 2012 27" 3.2ghz i5 and the motu ultrilite. up to now i have no solution for this problem. the worst i can't use them never before. since from the first day. i attempt everything. from re-install to fresh install. resetting the nvram and pram. formatting the hd and make a fresh install from the operating system. using balanced audio cables and so on...but same problem all time. even my technological knowledge and know how which i have as electrical engineer couldn't help me. first i was lucky to have apple care in those situations. after get back the imac from the service provider i sadly decide nothing has changed. and they would told me it runs all fine. in meantime i testing my ni audio dj8 over usb. it's similar with the ultralite because the buzzing, clicking and noise is not so extrem as it is on ultralite. but it's here.
the curios with my macbook pro and my old imac early 2008 it runs and works fine without problems. for next week i have fixed a new date by the service provider. but then with my intercace, monitors to simulate this error and i hope they find the reason. perhaps i can tell you some news or solutions next week. i'm relly curious about it.

Similar Messages

Firewire problems with audio interface

Hi, I have a problem with the firewire connection of my Power Mac G4: I have a Tascam FW-1884 audio interface and when I turn it on, the firewire led (that should be always turned on for the correct working of the machine) after a pair of seconds turns off and doesn't work at all..
Here's what my system console says if helps..
===== Thu Jan 12 2006 ===== 09:44:12 Europe/Rome =====
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: init (1 of 1)
Jan 12 09:44:20 localhost kernel: TASCAM FW1884 Audio Device: start 1.2.1 (instances 1)
Jan 12 09:44:21 localhost kernel: TASCAM FW1884 Audio Device: message 0xE00087D2 for 0x12060000
Jan 12 09:44:23 localhost kernel: TASCAM FW1884 Audio Device: HandleWatchdogTimer: prefs daemon relaunched
Jan 12 09:44:24 localhost kernel: TASCAM FW1884 Audio Device: newUserClient
Jan 12 09:44:24 localhost kernel: TASCAM User Client: start
Jan 12 09:44:24 localhost kernel: TASCAM User Client: clientMemoryForType
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: High speed bus detected
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FinishStartup: FW884MacXDevice (216812)
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: Driver Register Version 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884REGISTERVERSION 0x00000014
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884FPGAVERSION 0x00010031
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884ARMVERSION 0x000100B7
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWAREVERSION 0x00030000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884HARDWARESERIAL 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDMSB 0x00022EFF
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884GUIDLSB 0xFE800000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mRegBaseAddress 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mNodeNum 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mGenerationNumber 0x0000000E
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mlocalNodeNum 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveHi 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: FW1884DeviceHandlePlugIn mMIDIReceiveLo 0x00000000
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: initHardware
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: createAudioEngine
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: init (1)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: start (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: initHardware (3)
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM Audio Engine: performFormatChange
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000001
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000002
Jan 12 09:44:29 localhost kernel: TASCAM FW1884 Audio Device: DoStartAudioTransfers w/resync
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: Input stream stopped (B)
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:30 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000200
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOCHANNEL 0x00000000
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:31 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000204
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: New RECORD_ISOSPEED 0x00000000
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:32 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed ReadRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000020C
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: New PLAYBACK_ISOCHANNEL 0x00000000
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:33 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000022C
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000214
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:34 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000218
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x0000021C
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: * Failed WriteRegisterLong 0xE00002D6
Jan 12 09:44:35 localhost kernel: TASCAM FW1884 Audio Device: at 0x00000228
I've tried running the same interface on my i-book (with the same drivers installed on the powermac) and all was good..
Anyone can help me?
Thanks =)
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz
power mac G4 quicksilver 800Mhz Mac OS X (10.3.9) i-book G4 1,25Ghz

On both computers I have only one account, the fw cable is always the same..
I have purchased a new cable and I'm testing it..
Another thing to say is that the fw port number 2 is generally working better than 1.. I mean, while port 1 never loads my tascam (the computer firewire connection is always loaded succesfully on both ports) port 2 sometimes works.. well this can't be called stability at all =)
Sometimes reastarting computer, unplugging cables etc can help starting succesfully a new session.. I've already resetted PMU but no progress..
All these things don't last longer than one session..

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

9.1.7 buggy with audio interface

So, my PreSonus Firebox regularly goes silent since the 9.1.7 update.
This seems to always happen if I put the computer to sleep and wake it again... sound becomes unavailable until I toggle audio output settings in Logic, or quit the program.
Output from any other application is also silenced. It's restored when I quit Logic.
Anyone else had this problem with their interface?
Thanks...

This problem actually has to do with more than waking-up issues. Sometimes the interface goes silent just when Logic is put in the background for awhile. Regarding the necessity for restarting-after-wake to keep things going, I can't recall ever having a problem similar to this since the days of OS9, and I work daily with Logic and many other audio apps. My firewire interfaces (Presonus and other) have been solidly reliable upon waking.

Problem with Audio on HP Envy 6-1130sw (C6F62EA)

Hello everyone.
I have a problem with audio on my ultrabook HP Envy 6. Sometimes when I try to play music there are no low tones and music plays really silent... And then when I restart PC problem dissapears and music plays fine... I thought there is a problem with speakers, but when I connected 5.1 speakers there were also only high tones. Same thing happens on headphones. Is it a hardware problem or maybe software? Actually I use Windows 8.1 and drivers are up to date. If any one of you had same problem please post.
Thanks.

Hi piotrek1130sw,
From what you have described, I think the best approach would be to restore the original IDT driver, restart the computer, test that driver, then install the driver update, and test the outcome of installing the newest driver.
Use the following link for instructions to recovery the ITD driver using Recovery Manager. Restoring applications and drivers.
Once the driver is restored, restart the computer and test the audio. If the audio is good you can continue to use this driver, or you can reinstall the update and see what happens. IDT High-Definition (HD) Audio Driver.
If installing the newest driver causes the issue to occur but the recovered driver worked, I suggest recovering again.
If neither driver works I will gladly follow up and provide any assistance I can.
Please let me know the outcome.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

The upgrade to Firefox 4 is causing massive problems with my computer. How do I uninstall it and go back to using the previous version?

Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?

According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

Problem with audio configuration

when i turned on Itunes on on my computer it had this message: Problem with audio configuration. Audio/video playback may not operate properly. How do I fix it?

I reinstalled iTunes & QuickTime as per giterdone response to rpestow on 12 November
instructions at: http://docs.info.apple.com/article.html?artnum=93698
Thanks giterdone

My firewire port works with ext hd but not with audio interface

2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
This is not, neccessarily, an Apple issue.

Two problems with audio clips

Hello,
I'm having two problems with audio clips:
1. When I try to drag a clip from the viewer, I can't do it because it won't let me drag the clip. It only lets me drag the pointer around within the clip.
2. When I drag an audio clip from the browser into the timeline I don't get any audio, just a series of beeps (and yes, my audio media is on-line -- I can listen to it in the viewer, just not the timeline).
What am I doing wrong?
Thanks.

1. Drag the little hand on speaker icon to drag from
the Viewer...
Thanks! (Does it actually say that in the documentation anywhere? I try to RTFM, but the FM seems to be a little, er, mute on this point.)
2. It means your sequence settings don't match the
properties of the source audio you're putting in it,
and you either need to change the settings in the
sequence, or render the audio.
Ah, that would explain it. Thanks!

Massive problem with iMac i5

Today I bought a new i5 iMac with 8Gig of ram. I had massive problems with the instillation of Lion. I spoke with Apple for nearly 1.5 hours. I finally got it working and now it has crashed 9 times in 30 minutes. Why?? Please Help. I am going to take it back to the shop tomorrow.

Thanks fro your quick reply.
I get the slow darkened screen that moves down the until it says that I have to hold down the poer button for a forced restart.
I tried opening all the really big memory hogs ll at once, eg Final cut pro, apature, imove HD etc, and that was no problem. It seem sto be completly random.
This is the report that I get:
Interval Since Last Panic Report: 387 sec
Panics Since Last Report:          6
Anonymous UUID:                    5400E7FB-D8A1-4CDD-985D-3F1E8023753D
Fri Aug 26 23:00:24 2011
panic(cpu 2 caller 0xffffff80002c268d): Kernel trap at 0xffffff8000293188, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffb8009a19ac8, CR3: 0x000000000eaeb00f, CR4: 0x00000000000606e0
RAX: 0xffffff8009a36e78, RBX: 0xffffff8009a466d0, RCX: 0xffffff80008bd800, RDX: 0x00000000000000e0
RSP: 0xffffff80f2b23d80, RBP: 0xffffff80f2b23da0, RSI: 0xffffff8009a1bec0, RDI: 0xffffff80008bd8e0
R8: 0xfffffb8009a19ac0, R9: 0xffffff80f2b23ef8, R10: 0x00000001136ef000, R11: 0x0000000113650f80
R12: 0xffffff80008bcc00, R13: 0x0000000000000000, R14: 0x0000000000000072, R15: 0x000000000000000e
RFL: 0x0000000000010202, RIP: 0xffffff8000293188, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0xfffffb8009a19ac8, Error code: 0x0000000000000002, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f2b23a40 : 0xffffff8000220702
0xffffff80f2b23ac0 : 0xffffff80002c268d
0xffffff80f2b23c60 : 0xffffff80002d7a3d
0xffffff80f2b23c80 : 0xffffff8000293188
0xffffff80f2b23da0 : 0xffffff80002958b2
0xffffff80f2b23dc0 : 0xffffff800026c5ba
0xffffff80f2b23f40 : 0xffffff80002c1f2b
0xffffff80f2b23fb0 : 0xffffff80002d7961
BSD process name corresponding to current thread: WebProcess
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 492863372471
last loaded kext at 51964964367: com.apple.driver.AppleBluetoothHIDKeyboard          152.3 (addr 0xffffff7f81cbc000, size 12288)
last unloaded kext at 223039016620: com.apple.driver.AppleUSBUHCI          4.4.0 (addr 0xffffff7f80ab5000, size 65536)
loaded kexts:
com.Cycling74.driver.Soundflower          1.5.1
com.apple.driver.AppleBluetoothMultitouch          66.3
com.apple.filesystems.udf          2.2
com.apple.filesystems.msdosfs          1.7
com.apple.driver.AppleHWSensor          1.9.4d0
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleUpstreamUserClient          3.5.9
com.apple.driver.AppleMCCSControl          1.0.24
com.apple.driver.AppleHDA          2.1.1f12
com.apple.driver.AppleMikeyDriver          2.1.1f12
com.apple.driver.AGPM          100.12.40
com.apple.driver.AudioAUUC          1.59
com.apple.driver.AppleSMCLMU          2.0.1d2
com.apple.kext.ATIFramebuffer          7.0.4
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.ACPI_SMC_PlatformPlugin          4.7.0b2
com.apple.ATIRadeonX3000          7.0.4
com.apple.driver.AirPort.Atheros40          500.55.5
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.1.9
com.apple.driver.AppleIntelHDGraphics          7.0.4
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleIntelSNBGraphicsFB          7.0.4
com.apple.driver.AudioIPCDriver          1.2.0
com.apple.driver.AppleIRController          309
com.apple.iokit.SCSITaskUserClient          3.0.0
com.apple.driver.AppleUSBCardReader          3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          32
com.apple.iokit.IOAHCIBlockStorage          2.0.0
com.apple.driver.AppleUSBHub          4.4.0
com.apple.driver.AppleFWOHCI          4.8.6
com.apple.iokit.AppleBCM5701Ethernet          3.0.6b9
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleAHCIPort          2.1.8
com.apple.driver.AppleUSBEHCI          4.4.0
com.apple.driver.AppleACPIButtons          1.4
com.apple.driver.AppleRTC          1.4
com.apple.driver.AppleHPET          1.6
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.4
com.apple.driver.AppleAPIC          1.5
com.apple.driver.AppleIntelCPUPowerManagementClient          166.0.0
com.apple.nke.applicationfirewall          3.0.30
com.apple.security.quarantine          1
com.apple.driver.AppleIntelCPUPowerManagement          166.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          152.3
com.apple.driver.AppleHIDKeyboard          152.3
com.apple.driver.AppleMultitouchDriver          220.62
com.apple.driver.IOBluetoothHIDDriver          2.5f17
com.apple.kext.triggers          1.0
com.apple.driver.DspFuncLib          2.1.1f12
com.apple.driver.AppleAVBAudio          1.0.0d11
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IOFireWireIP          2.2.3
com.apple.iokit.IOSurface          80.0
com.apple.driver.AppleHDAController          2.1.1f12
com.apple.iokit.IOHDAFamily          2.1.1f12
com.apple.driver.IOPlatformPluginFamily          4.7.0b2
com.apple.iokit.IO80211Family          400.40
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.3
com.apple.driver.AppleThunderboltEDMSink          1.1.1
com.apple.driver.AppleThunderboltEDMSource          1.1.1
com.apple.kext.ATI6000Controller          7.0.4
com.apple.kext.ATISupport          7.0.4
com.apple.iokit.IOBluetoothSerialManager          2.5f17
com.apple.iokit.IOSerialFamily          10.0.5
com.apple.iokit.IONDRVSupport          2.3
com.apple.iokit.IOAVBFamily          1.0.0d22
com.apple.driver.AppleSMC          3.1.1d2
com.apple.iokit.IOGraphicsFamily          2.3
com.apple.iokit.IOAudioFamily          1.8.3fc11
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.BroadcomUSBBluetoothHCIController          2.5f17
com.apple.driver.AppleUSBBluetoothHCIController          2.5f17
com.apple.iokit.IOBluetoothFamily          2.5f17
com.apple.driver.AppleThunderboltDPOutAdapter          1.3.2
com.apple.driver.AppleThunderboltDPInAdapter          1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily          1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter          1.1.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.0.0
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.7
com.apple.iokit.IOUSBHIDDriver          4.4.0
com.apple.iokit.IOAHCISerialATAPI          2.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.0.0
com.apple.iokit.IOUSBMassStorageClass          3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.0.0
com.apple.driver.AppleUSBMergeNub          4.4.0
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.driver.XsanFilter          403
com.apple.driver.AppleThunderboltNHI          1.2.6
com.apple.iokit.IOThunderboltFamily          1.4.9
com.apple.iokit.IOUSBUserClient          4.4.0
com.apple.iokit.IOFireWireFamily          4.4.3
com.apple.iokit.IOEthernetAVBController          1.0.0d5
com.apple.iokit.IONetworkingFamily          2.0
com.apple.iokit.IOAHCIFamily          2.0.6
com.apple.iokit.IOUSBFamily          4.4.0
com.apple.driver.AppleEFIRuntime          1.5.0
com.apple.iokit.IOHIDFamily          1.7.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          165
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          326
com.apple.iokit.IOStorageFamily          1.7
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.4
com.apple.iokit.IOPCIFamily          2.6.5
com.apple.iokit.IOACPIFamily          1.4
Model: iMac12,2, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.72f1
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.55.4-P2P
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Maxtor 3200, 0x0d49 (Maxtor), 0x3200, 0xfa120000 / 6
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x1003, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: hub_device, 0x050d (Belkin Corporation), 0x0234, 0xfd140000 / 5
USB Device: DataTraveler 2.0, 0x0951 (Kingston Technology Company), 0x1607, 0xfd142000 / 7
USB Device: Basics Desktop, 0x0d49 (Maxtor), 0x7410, 0xfd143000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
I got this photo from the net, but this is what I get. (Now 12 times)
It was a 4 Gig ram imac, but the store made it up to 8 gig with 4x2 gig before I collected it.
Memory Slots:
ECC:          Disabled
BANK 0/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1333 MHz
Status:          OK
Manufacturer:          0x02FE
Part Number:          0x45424A3231554538424655302D444A2D4620
Serial Number:          0x245317A8
BANK 1/DIMM0:
Size:          2 GB
Type:          DDR3
Speed:          1333 MHz
Status:          OK
Manufacturer:          0x02FE
Part Number:          0x45424A3231554538424655302D444A2D4620
Serial Number:          0x245317A9
BANK 0/DIMM1:
Size:          2 GB
Type:          DDR3
Speed:          1333 MHz
Status:          OK
Manufacturer:          0x802C
Part Number:          0x000000000000000000000000000000000000
Serial Number:          0xFFFFFFFF
BANK 1/DIMM1:
Size:          2 GB
Type:          DDR3
Speed:          1333 MHz
Status:          OK
Manufacturer:          0x802C
Part Number:          0x384A53463235363634485A2D314734443120
Serial Number:          0xEA364A5A

Massive problem with remote destination

hello all,
we have massive problems with our remote destinations.
after i create the remote destination profile and added the line, i create the remote destination for my mobile phone.
all ok so. but if im associate my mobile phone with the line by choosing Line Association i´m no able to reach many numbers in my company anymore.
there is no ringing tone. there is nothing and after 20-30 seconds i got an busy tone.
if i delete the Line Association i can reach the number normally.
Perhaps you got any idea . I dont got any anymore

finally we found the problem
it was at the cucm service parameters.
we changed " machting caller id with remote destination " to "partial match" after that all is working fine.

Premiere pro cc 2014 problems with audio

I have edited some sequences in premiere using sony xdcam ex clips. The clips where recorded as 1080 50i. I have edited it in the same sequence properties as premiere sugested it. All there is fine and audio is playing well. The problem strats when i change the sequence properties and select it at 1080 60i or 29p. The audio is distorted and it sounds like robotic, sometimes audio is muted on audio transitions. When i revert the properties back to 50i then all is fine.
Anyone else experience the same problems?

Sometimes i must add some clips that are recorded on canon 6d on 29.97p. and this clips look choppy and jerky on 50i sequence. But on 60i sequence both 50i and 29.97p look good. On premiere cc i cann change sequence properties without any problems with audio, only on cc 2014 that audio problem exist.

[Vox] MSI VOX TV BOX USB 2.0 problem with audio drivers compatibility

Ok,let's go...
I have a DELL Latitude d510 laptop with a centrino 1.73 GHz procesor and a soundcard supported by Sigmatel software Sigmatel C-Major audio.I bought MSI VOX TV BOX USB 2.0 and tried to install it on my lap top.Yes,I had problems with SP2 on my XP and the MSIVPS software from the instalation CD was crashing every time I tried to start it,but I solved those problems by downloading the latest drivers and the 3.xx version of MSIPVS.But...I still have a problem with audio.To be precise it seems that my audio drivers are incompatible with the VOX drivers.So now I have video but I don't have audio.Also I installed the tv card on my desktop machine and it worked like a charm(everything workes:audio,video,the old MSIPVS which I like better than the new one cause it supports my remote,has better way of managing scanned channels,e.t.c ,but I have USB 1.1 on my MB so the image quality is very poor).I did a lot of experimenting,for example i uninstaled my audio drivers(that Sigmatel C-Major thing),and installed the old MSIVPS and guess what...IT WORKED but there is no use from this cause I don't have audio On the other hand if I have everything installed then in the MSIVPS (the 3.xx version not the old one) under audio I get CD Player as an input audio device(what happened with microphone...?).To cut the long story short I tried a bunch of things and still no audio.Is there any other case of DELL audio software-VOX incompatibility?Any ideas,or solutions?

thank you for answering me. y have no pci card working, only usb 2.0 and sata devices. also, the MSI geforce 9600gt PExp 2.0 gpu. the only usb 2.0 devices which work, are the flash (pen) drives, keyboard and mouse. but no way that the WLAn adapter and TVcapture, both usb 2.0 work.i've tested them front side and rear side and is the same failure: if i use a pendrive, works ok. if i insert the wlan or the tv capture stop work as the 2.0 and a advertising window tell me to change to a 2.0 port, means the ports are working slower, at 1.1. i still have the other PC, built on the MSI K9N4-slif mobo, tested them and both devices work at perfection. i have 2 screenshots to show you:
this, is the device manager (sorry, in spanish but you understand that's about the nVIDIA EHCI USB 2.0 controller. the 2nd one seems to be more sensitive (works worth) then the first one. when the tvcapture begin work, then fails, i'm trying to update this controller, does it ok but then the devicemanager-window freeze. i must stroke the "enter" key to "accept" / finish the update. then, fails again:
the other one is from everest corporate edition:
both drivers marked with purple colour!
i think i should update this Win XP drivers, but how? the usbport.inf file (C:\Windows\inf) don't change anything. i don't want to switch xp to vista, i'm happy whit it.
i'm thinking also on another possibility: could be an energy failure? some usb devices, like the big usb flash dives. 250-320gb, fail because the 5v/usb are receiving it's not enough. could be, but that means this mobo has no solution and i'll loose my money.
thank you very much and i'll stay alert of your suggestions. by

Problem with mac interface

Hi !
I just installed Dreamweaver CS4 on my new Macbook Pro. I used to use Dreamweaver CS4 on Windows. But, I have a problem with the interface on my macbook : when dreamweaver is running, I can see my desktop : there is no background like in a MDI application (on windows). To illustrate my problem, I took two screenshots :
on mac :
and on windows :
So, I would like to know how to have the same interface with Mac OS X than with Windows.
Thanx for your help and sorry for my english but i'm french.

Click the green zoom (+) button in the top-left corner of the window to switch between a larger and smaller window size.
Depending on the active application it either fills the entire screen or zooms to the size of the last largest size of the window that you set yourself by dragging bottom righthand corner to desired size.
Photoshop has various ways to hide the Desktop. Either by using the Application frame (which doesn't neccessarily hide the entire Desktop) or by pressing the key F. Wanted by PC users but usually not by Mac users. (I would personaly never use it as it obscures the Desktop so you cannot easily reach other applications and documents by just clicking them to call them into the front and get active).
DW doesn't have an application frame but it is easy enough to fill the entire screen with the active window, particularly if you open up a few panels and dock them to each other and use Split screen view with code on one size and design on the other, then place various bars at top and bottom. When you have organized it to your liking, save it as a Workspace (Window/Workspace Layout/New Workspace) and you have it handy for future use.
Learn how to use the windows and workspaces in an efficient way and one of these days you might get used to it...

Can't run itunes because it has detected a problem with audio configuration

What does that mean and how do i fix it? I had Itunes installed on my computer for ages but I had to have it restored because the firewall was playing up and since i have tried to reinstall itunes it has been saying that there is a problem with audio configuration---any ideas?

Some people have found the following works:
Completely uninstall Quicktime (NOT iTunes) using ALL the method in this article:
http://docs.info.apple.com/article.html?artnum=93698
Turn off antivirus/anti spyware
Go to Control Panel>Add/Remove Programs>Change or Remove Programs
Select iTunes, then click on Change, then select Repair.
Restart computer

Massive problem with audio interface

Similar Messages

Maybe you are looking for