Massive problem with remote destination
hello all,
we have massive problems with our remote destinations.
after i create the remote destination profile and added the line, i create the remote destination for my mobile phone.
all ok so. but if im associate my mobile phone with the line by choosing Line Association i´m no able to reach many numbers in my company anymore.
there is no ringing tone. there is nothing and after 20-30 seconds i got an busy tone.
if i delete the Line Association i can reach the number normally.
Perhaps you got any idea . I dont got any anymore
finally we found the problem
it was at the cucm service parameters.
we changed " machting caller id with remote destination " to "partial match" after that all is working fine.
Similar Messages
-
Problems with Remote App on iOS 4?
I have a new iPhone 4 and tried to use the Remote App in Connection with Apple TV. While I'am able to pair the remote app with Apple TV, I cannot use it properly. It works for a while, then it get's disconnected with a message that maybe a Firewall might be activated in the Router.
I have no problems with Remote App connected to my iTunes Library. I also tried it with a iPod Touch which is still on iOS 3.1.3, no problems to connect to the Apple TV from there as well.
Are there any known problems with iOS 4 and Apple TV?Chenks wrote:
maybe for you, but isn't for me.
i have the remote app on my iphone4 and it's connected to 2 appletv's.
i don't experience any dropping of connection etc.
May I ask what wifi hardware you use? It might be an wifi issue, but one which is only related with the "Bonjour" protocol which seems to be used for the Remote App. I found this thread which is older (iOS 3) but describing exactly the same problems:
http://discussions.apple.com/thread.jspa?threadID=2048555&start=0&tstart=0
bear in mind that the iphone4 is now "n" wifi compatible (2.4Ghz), so could it be that the "n" part of your network is poor and thus why you only see the problem on the iphone4 ?
At least it is not poor when using it from other devices or moving a lot of data in other Apps. It is all Apple Hardware (nothing older than 2 years), and maybe that's the problem. I never had network hardware which made so much trouble, as Apples Airport series. I wouldn't wonder if it is an incompatibility between a new wifi chip in the iPhone 4 and a older Revision of an Airport device. But I don't know how to check - is there a system.log on the iPhone which I can access somehow? -
Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?
According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.
-
Today I bought a new i5 iMac with 8Gig of ram. I had massive problems with the instillation of Lion. I spoke with Apple for nearly 1.5 hours. I finally got it working and now it has crashed 9 times in 30 minutes. Why?? Please Help. I am going to take it back to the shop tomorrow.
Thanks fro your quick reply.
I get the slow darkened screen that moves down the until it says that I have to hold down the poer button for a forced restart.
I tried opening all the really big memory hogs ll at once, eg Final cut pro, apature, imove HD etc, and that was no problem. It seem sto be completly random.
This is the report that I get:
Interval Since Last Panic Report: 387 sec
Panics Since Last Report: 6
Anonymous UUID: 5400E7FB-D8A1-4CDD-985D-3F1E8023753D
Fri Aug 26 23:00:24 2011
panic(cpu 2 caller 0xffffff80002c268d): Kernel trap at 0xffffff8000293188, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xfffffb8009a19ac8, CR3: 0x000000000eaeb00f, CR4: 0x00000000000606e0
RAX: 0xffffff8009a36e78, RBX: 0xffffff8009a466d0, RCX: 0xffffff80008bd800, RDX: 0x00000000000000e0
RSP: 0xffffff80f2b23d80, RBP: 0xffffff80f2b23da0, RSI: 0xffffff8009a1bec0, RDI: 0xffffff80008bd8e0
R8: 0xfffffb8009a19ac0, R9: 0xffffff80f2b23ef8, R10: 0x00000001136ef000, R11: 0x0000000113650f80
R12: 0xffffff80008bcc00, R13: 0x0000000000000000, R14: 0x0000000000000072, R15: 0x000000000000000e
RFL: 0x0000000000010202, RIP: 0xffffff8000293188, CS: 0x0000000000000008, SS: 0x0000000000000000
CR2: 0xfffffb8009a19ac8, Error code: 0x0000000000000002, Faulting CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff80f2b23a40 : 0xffffff8000220702
0xffffff80f2b23ac0 : 0xffffff80002c268d
0xffffff80f2b23c60 : 0xffffff80002d7a3d
0xffffff80f2b23c80 : 0xffffff8000293188
0xffffff80f2b23da0 : 0xffffff80002958b2
0xffffff80f2b23dc0 : 0xffffff800026c5ba
0xffffff80f2b23f40 : 0xffffff80002c1f2b
0xffffff80f2b23fb0 : 0xffffff80002d7961
BSD process name corresponding to current thread: WebProcess
Mac OS version:
11B26
Kernel version:
Darwin Kernel Version 11.1.0: Tue Jul 26 16:07:11 PDT 2011; root:xnu-1699.22.81~1/RELEASE_X86_64
Kernel UUID: D52AAB80-B2BC-3C6E-BBEA-78BD28064998
System model name: iMac12,2 (Mac-942B59F58194171B)
System uptime in nanoseconds: 492863372471
last loaded kext at 51964964367: com.apple.driver.AppleBluetoothHIDKeyboard 152.3 (addr 0xffffff7f81cbc000, size 12288)
last unloaded kext at 223039016620: com.apple.driver.AppleUSBUHCI 4.4.0 (addr 0xffffff7f80ab5000, size 65536)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.1
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.filesystems.udf 2.2
com.apple.filesystems.msdosfs 1.7
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AppleHDA 2.1.1f12
com.apple.driver.AppleMikeyDriver 2.1.1f12
com.apple.driver.AGPM 100.12.40
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.kext.ATIFramebuffer 7.0.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.ATIRadeonX3000 7.0.4
com.apple.driver.AirPort.Atheros40 500.55.5
com.apple.driver.AppleLPC 1.5.1
com.apple.driver.AppleBacklight 170.1.9
com.apple.driver.AppleIntelHDGraphics 7.0.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelSNBGraphicsFB 7.0.4
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleIRController 309
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.driver.AppleUSBCardReader 3.0.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.iokit.AppleBCM5701Ethernet 3.0.6b9
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.AppleMultitouchDriver 220.62
com.apple.driver.IOBluetoothHIDDriver 2.5f17
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.1.1f12
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.iokit.IOSurface 80.0
com.apple.driver.AppleHDAController 2.1.1f12
com.apple.iokit.IOHDAFamily 2.1.1f12
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.iokit.IO80211Family 400.40
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.driver.AppleThunderboltEDMSink 1.1.1
com.apple.driver.AppleThunderboltEDMSource 1.1.1
com.apple.kext.ATI6000Controller 7.0.4
com.apple.kext.ATISupport 7.0.4
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IONDRVSupport 2.3
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.driver.AppleSMC 3.1.1d2
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.driver.AppleThunderboltDPOutAdapter 1.3.2
com.apple.driver.AppleThunderboltDPInAdapter 1.3.2
com.apple.driver.AppleThunderboltDPAdapterFamily 1.3.2
com.apple.driver.AppleThunderboltPCIDownAdapter 1.1.6
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.iokit.IOAHCISerialATAPI 2.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.0
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.driver.XsanFilter 403
com.apple.driver.AppleThunderboltNHI 1.2.6
com.apple.iokit.IOThunderboltFamily 1.4.9
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: iMac12,2, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.7 GHz, 8 GB, SMC 1.72f1
Graphics: AMD Radeon HD 6770M, AMD Radeon HD 6770M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x000000000000000000000000000000000000
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x802C, 0x384A53463235363634485A2D314734443120
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.55.4-P2P
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: Maxtor 3200, 0x0d49 (Maxtor), 0x3200, 0xfa120000 / 6
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x1003, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: hub_device, 0x050d (Belkin Corporation), 0x0234, 0xfd140000 / 5
USB Device: DataTraveler 2.0, 0x0951 (Kingston Technology Company), 0x1607, 0xfd142000 / 7
USB Device: Basics Desktop, 0x0d49 (Maxtor), 0x7410, 0xfd143000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3
I got this photo from the net, but this is what I get. (Now 12 times)
It was a 4 Gig ram imac, but the store made it up to 8 gig with 4x2 gig before I collected it.
Memory Slots:
ECC: Disabled
BANK 0/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x02FE
Part Number: 0x45424A3231554538424655302D444A2D4620
Serial Number: 0x245317A8
BANK 1/DIMM0:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x02FE
Part Number: 0x45424A3231554538424655302D444A2D4620
Serial Number: 0x245317A9
BANK 0/DIMM1:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x802C
Part Number: 0x000000000000000000000000000000000000
Serial Number: 0xFFFFFFFF
BANK 1/DIMM1:
Size: 2 GB
Type: DDR3
Speed: 1333 MHz
Status: OK
Manufacturer: 0x802C
Part Number: 0x384A53463235363634485A2D314734443120
Serial Number: 0xEA364A5A -
Hi everybody,
I have problem with key mapping. My table has only one field Name (Text[50]). This field is a display field.
Value Key Mapping of the table is set to Yes.
Problem is that I cannot see the Remote key field among destination fields in Import Manager.
Can anybody help me? Is there something I should set?
Thanks
TomasHello:
This usually happens if you haven't set up any Client Systems. Please go to MDM console -> your Repository -> Admin -> Client Systems. There set your systems as Inbound/Outbound.
Regards
Alejandro -
Problems with remote app solution suggestion!
Hello,
I have been trying to get the Remote app to work on my windows 8 PC, but to no result. I am using an iPhone 5S. I believe the problem is that my PC is a desktop connected to the internet via ethernet. This is a very common issue. I spent around 5 hours on the phone with apple support, but all I got from them was a very long conversation. Even the senior support supervisor could not help me. Many people use iTunes on PCs that are connected via ethernet and they are unable to use the Remote app because it lacks a very basic and simple feature: to enter the host IP manually. When a PC is connected via ethernet to a router rather than wirelessly it cannot be found by the iPhone as a device that exists in the network, so you need to find it manually. Hopefully some of the higher-ups will hear this simplest of ideas and implement it, so the remote app no longer gets 1 or 2 star reviews saying it does not work.Welcome to the Apple Community Johnson4o.
That's not correct, homesharing works over wired, wireless and mixed. If you have enabled homesharing correctly on both devices, then there' same problem with your network or settings, there is no need to add manual IP's, in fact there is nowhere to do so. -
Problems with remote control and user accounts - error 1759?
We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd) -
Problem with remote control and Windows 7 - HP Pavilion 6301eu
I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you
Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark -
Hi GURU,
I have a problem with the record of RFC destination.
When i created RFC destination TCP/IP when i made the tests, it`s ok.
But when i used this rfc destination in a function of ABAP. I have an error. The error is:
RfcExecProgram'#Win32 error 2: The system cannot find the file speci
Can you help me??
What should I do to run properly?
Thank for all.
regards,
RAFAHi,
Even I am also new to SAP , but I have little knowledge about RFC, try to create your RFC of type 3 (ABAP type ), then if you use this RFC , I hope no problem will come if the authorization details and IP /Host name of the destination system are perfect.
also Please suggest me why ( when ) we use TCP /IP type of RFCs -
Massive problem with audio interface
Hi there.
I recently bought a brandnew iMac 27" Haswell i7. I encountered problems with my Focusrite Scarlett 18i8 audio interface. These are buzzing, clicking and noise immediately or after 3 minutes or so. I tried everything, re-installed the driveres several times, nothing, really nothing worked.
Then I bought an RME Babyface audio interface - and guess what? It's the same problem. I also have a massive sound noise after some minutes or the recording channel in Garage Band drops completely.
What is wrong here? I already tried using a different power plug, tried all USB ports, turned off WiFi, HDD sleep mode, etc. Nothing worked.
Do you have an idea?
I appeciate your help,
Adrian.same problem with my imac late 2012 27" 3.2ghz i5 and the motu ultrilite. up to now i have no solution for this problem. the worst i can't use them never before. since from the first day. i attempt everything. from re-install to fresh install. resetting the nvram and pram. formatting the hd and make a fresh install from the operating system. using balanced audio cables and so on...but same problem all time. even my technological knowledge and know how which i have as electrical engineer couldn't help me. first i was lucky to have apple care in those situations. after get back the imac from the service provider i sadly decide nothing has changed. and they would told me it runs all fine. in meantime i testing my ni audio dj8 over usb. it's similar with the ultralite because the buzzing, clicking and noise is not so extrem as it is on ultralite. but it's here.
the curios with my macbook pro and my old imac early 2008 it runs and works fine without problems. for next week i have fixed a new date by the service provider. but then with my intercace, monitors to simulate this error and i hope they find the reason. perhaps i can tell you some news or solutions next week. i'm relly curious about it. -
Problem with Remote Desktop on iPad 2 and windows 8.1 pro
I downloaded the Microsoft Remote Desktop app from the App Store on my iPad 2. I typed in the IP address for my windows 8.1 pro computer on my iPad 2 in school to try connecting to my windows 8.1 pro computer at home. I'm having
a hard time doing it. Do I need a rd remote gateway to access my computer from outside my local network. If so, how do I find my gateway server name? Also, I saw somewhere that I have to press accept in a pop up message on the computer your trying to connect
to. Is this true? No one is home during the day and my iPad 2 has to stay in school. Can you please give me a step by step guide with photos to help me connect to my windows 8.1 pro computer from my iPad 2 from school, which is of course outside my local network.Hi,
Please refer to the document below for the procedure to use Microsoft Remote Desktop APP of IOS APP store.
Getting Started with Remote Desktop Client on iOS:
http://technet.microsoft.com/en-us/library/dn473013.aspx
Roger Lu
TechNet Community Support -
MacBook Air problem with Remote Disc
I am trying to upload a disc to my MBA from a shared MBPro. Remote Disc recognizes the shared MBP and the CD but cannot access the data. Any suggestions?
Actually the restriction DOES apply to an audio CD.
From this document:http://support.apple.com/kb/TS2057
"MacBook Air and Mac mini do not support playing DVD movies or audio CD media with Remote Disc. In addition, some discs, such as game discs, may be copy-protected and are therefore unusable. To play DVD movies, audio CD media, or copy-protected discs on the MacBook Air or Mac mini, use the MacBook Air SuperDrive." -
I haven't been able to use my ipod or itunes for months and I cant figure out why. Everytime I try to open itunes I get this message
"The folder 'itunes' cannot be found or created, and is required"
I have tried reinstalling itunes and creating the folder and nothing seems to work. About a month ago I lost everything which was on my 30 gig ipod and since then I cant get itunes to work on my computer. The only thing I can think of is that I moved the folder to another drive and now I can't find it anywhere and I don't know what to do to fix this massive problem.
Plz help me out if you can...
Cheerzfolks getting that complication where "My Music" doesn't appear as an option in TweakUI have had some success using the alternate technique from this Nigel Carpenter post:
Nigel Carpenter: re: Itunes problem -
Massive problem with new Wirless iMac keyboards
Does anyone else have a problem with the new differentiation between wired and wireless keyboard? I assumed they would be the same, but have just seen that the bluetooth keyboards do not have a number pad on them.
For the way I use a computer I prefer wireless keyboards, but I am a composer and use Sibelius nearly every day, which is the main software for the music publication industry. This program NEEDS the number pad to function, which completely rules out the new wireless keyboards. So, if I get a new iMac, I will buy the wired keyboard, throw it in the bin, and then use the older white bluetooth keyboard from my iMac G5. This is a really poorly thought out design decision that did not work when they made those horrible small keyboards for the original CRT iMac, and are mostly unusable for Pro users for a variety of reasons.yea- the new wireless keyboard, being as perfect as it is, has one con, and thats not having the 10 key option. Ten key is a needed thing, but as stated before, the wireless keyboard was tested by folks who really wanted a smaller more compact like keyboard to move around more easier, and I guess apple took out the 10 key to give it more room, however, there is a need for the 10 key, however, I dont think apple saw that much of the interest or the need. I think it works in logic, but again, its the "small things" that get this new design in some trouble.
-
Massive problems with Samsung Fascinate
I've had my phone for a little over 9 months. When I first got it, it was great. Then the "upgrades" came. I now have an unreliable brick. In the past 20 minutes today, it has reset on me 4 times for no reason. It freezes constantly, so I can't depend on it to make or receive phone calls (which almost made me late to work one day since I couldn't call to have someone let me in at 5:30 in the morning.)
Is anyone else having these problems? Is Verizon planning on fixing these problems? What are my options? Any advice would be helpful.
Thanks!I've had the same problems with my Fascinate. Since the upgrade, it freezes up constantly. It's so bad that I don't even bother to turn it on most days (then I find out I missed a dozen calls and messages). It's really appalling that Verizon Wireless won't offer customers a better solution for a phone that clearly isn't working for them. I'm eligible for an "upgrade" in about a month and I can't wait to get away from this high-tech brick!
Maybe you are looking for
-
Hello, I am writing you from Zaragoza (Spain). I've bought a MEGA PC Series (Model 180) trhee weeks ago. I've installed WXP with SP1 and SP2 and all the utilities and drivers stored in your MEGAPC-CD. I have no problem with any driver: DDR-RAM, DVD,
-
Ora 12505 error in Sql developer
can any one help.... when i was about to create a table in oracle sql developer i got error mesg ora 12505 listener refused the connection... tns doesnt respond
-
DMS Link witlh Sales order and Material master
Hi, all here is my? Can we link DMS to both sales order and material master, for service feedback of a product from customer. rgds ben
-
Denormalized dimension and different fact levels
Thanks for reading... Scenario is to compare actual and plan sales. Actuals are on the level of cashdesk, plan is on higher level workstation. Dimension levels are Cashdesk -> Workstation -> Location, and is denormalized. Question is what is the best
-
I am attempting to send/beam a file to another friend using Bluetooth and my Bluetooth is enabled, but when I click the "Send File" tab under my Bluetooth icon nothing happens. Suggestions?