Massive update in APEX

Hi team,
I would like to know if you know something in how to implement the following:
I have a list of incidents, for example hundred of them in a report. I want to pick up 60 of them, then select the fields that I want to update, make the changes and then submit. All the changes should be updated massively. I know that the tabular form do that but I don't have the search feature and it didn't have the feature for picking up a bunch of records for updating all of them. Do you know if there is some item or form in APEX that allows me to do that or if not, an idea how would you do it? Thanks in advance.
Regards, Bernardo.

Similar Messages

Massive Update of Return Vendor flag and creation of Customer Data

Dear.
For many vendors I need to run a massive update of return vendor flag of purchasing data and creation of the linked customer.
I have tried to create a batch input recording using LSMW but the system send an error message WY164 It is not possible to copy data from field 'Returns with shipping proc.'
How can I solve this problem ?
Or do you know another solution to run a massive update of return vendor flag of purchasing data and creation of the linked customer ?
Thanks

hi,
Pls go through the SAP note 447070...
This may solve the problem...
check it once..
Regards
Priyanka.P

Why should avoid OLTP compression on tables with massive update/insert?

Dear expert,
We are planning oracle OLTP compression on a IS-U system, could you tell me
Why should avoid OLTP compression on tables with massive update/insert?
What kind of impact on the performance in the worst case?
Best regards,
Kate

Hi
When updating compressed data Oracle has to read it, uncompress it and update it.
The compression is then performed again later asynchronously. This does require a lot more CPU than for a simple update.
An other drawback is that compression on highly modified tables will generate a major increase in redo / undo log generation. I've experienced it on an DB where RFC tables where by mistake compressed, the redo increase was over 15%.
Check the remark at the end of Jonathan Lewis post.
Regards
http://allthingsoracle.com/compression-in-oracle-part-3-oltp-compression/
Possibly this is all part of the trade-off that helps to explain why Oracle doesn't end up compressing the last few rows that get inserted into the block.
The effect can be investigated fairly easily by inserting about 250 rows into the empty table - we see Oracle inserting 90 rows, then generating a lot of undo and redo as it compresses those 90 rows; then we insert another 40 rows, then generate a lot of undo and redo compressing the 130 rows. Ultimately, by the time the block is full we have processed the first 90 rows into the undo and redo four or five times.

Massive update broke Samba

I recently ran pacman -Syu on my Arch server box which I have been neglecting to do for about 4 months now, and unfortunately, this seems to have broken Samba.
The old version - which was 3.5.2 - started perfectly fine, and after updating it to 3.6.1 it now spews out these errors:
sudo /etc/rc.d/samba restart
Stopping Samba Server [DONE]
Starting Samba Server [BUSY]
/usr/bin/smbd: error while loading shared libraries: libssp.so.0: cannot open shared object file: No such file or directory
/usr/bin/nmbd: /usr/lib/libtdb.so.1: no version information available (required by /usr/sbin/nmbd)
/usr/bin/nmbd: /usr/lib/libtdb.so.1: no version information available (required by /usr/sbin/nmbd)
/usr/bin/nmbd: /usr/lib/libtalloc.so.2: no version information available (required by /usr/sbin/nmbd)
[FAIL]
This must be a once in a lifetime issue because I have done extensive googling and I can find nothing on this. I've read that libssp.so.0 is supposed to come with either gcc or gcc-libs, but I have both installed and up to date, and even after reinstalling both I don't seem to have this file. It isn't even displayed on the packages' file lists in the repository.
As much as I would love to right now, I cannot downgrade back to 3.5.2 because it requires heimdal which was replaced by krb5, and I was stuck in a dependency-loop trying to install krb5 before I ran the update so there's probably no way I can go back without encountering the same problem.
I did try finding a download for this mythical libssp.so.0 but none seemed to exist.
Anyone got a solution?

I have a similar issue, but with cups daemon and I haven't tried massive update.
cupsd: error while loading shared libraries: libssp.so.0: cannot open shared object file: No such file or directory
gcc-libs 4.6.1-3 version package has libssp.so.0, but gcc-libs 4.6.1-4 does not have libssp at all.
I have both cups and gcc-libs up to date.
Last edited by AleXoundOS (2011-11-26 20:20:58)

Updating to Apex 3.2 on Amazon EC2

Hello,
I am using a small Amazon Elastic Compute 2(EC2) AMI with oracle 10g XE 32-bit. The instance is allready installed but apex is 2.0.1 and i want to update it to 3.2, maybe even 4.0. The problem is that when i connect (using Putty)
and i try to unzip the apex_3.2.zip i get this error:
checkdir error: cannot create apex
unable to process apex/apxsqler.sql
checkdir error: cannot create apex
unable to process apex/utilities/readme.txt
... and so on for every file.
My AMI id is: ami-7acb2f13, small instance in the us-east.
Thanks in advance!

Thanks for the reply, tried both wireless and with ethernet cable - same result Have updated iTunes also to no avail.

KZZ2 trx - Possibility to do a massive updating of % overhead

Hello,
we have to update a very large quantity of new % overhead in costing sheet for cost estimate using transaction KZZ2. We did this activity manually in the past, but it's very heavy and it can cause errors, so we would like to know if there is the possibility to udpade them in massive way for example udpdating directly a specific table or something else.
Many thanks for support and suggest.
Regards
Giusy Castiglione
Accenture

Using BDC or LSMW with the help of Abaper is more easy than manual update
Srinivas

How to run a update from APEX 2.1 to APEX 2.2???

I am using version 2.1, and I want to update to 2.2, I downloaded the file from OTN, but after unziping, I found it is not a simple exe file but a bunch of sql and other files, how to run the upgrading, I think it is too diffficult in that way.
How many files I need to run in the SQL plus?
Which one is the one I need?
Puzzled?

So there will be no upgrading for Oracle DB XB APEX?The way you ask that implies that I said that this will never be possible and that is not what I said.
If I want to upgrade to 2.2, I need DBs other than XE?Today you have the option of installing Application Express 2.2 in Oracle Database 9iR2 or the SE, SE1, or EE editions of Oracle 10g Database.
Scott

Insert/update - merge apex items

hello =)
i want to insert data into a table and if the table has already the "List_id" i want to update values:
begin
FOR i IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
MERGE INTO list_values
USING dual
ON (list_values.list_id = to_number(APEX_APPLICATION.G_F02(i))
WHEN MATCHED THEN
UPDATE
SET
list_values.product_fk=:P900_PRODUCT_NAME,
ist_values.attribute=APEX_APPLICATION.G_F04(i),
list_values.value=APEX_APPLICATION.G_F05(i)
WHEN NOT MATCHED THEN
INSERT
list_values.product_fk,list_values.attribute,list_values.value
VALUES
*:P900_PRODUCT_NAME,APEX_APPLICATION.G_F04(i),APEX_APPLICATION.G_F05(i)*
end loop;
end;
got a lot of sql errors...
+1+ error has occurred
ORA-06550:line 6, column 65: PL/SQL: ORA-00907: missing right parenthesis ORA-06550: line 4, column 1: PL/SQL: SQL Statement ignored
Maybe someone can help me with the syntax of the merge statement or maybe merge doesn't work in this case. because of the apex_items.
also got seperated insert/update process. they work perfect, if i use the processes singly:
Begin
FOR i IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
insert into List_values (product_fk,attribute,value)
values (:P900_PRODUCT_NAME,APEX_APPLICATION.G_F04(i),APEX_APPLICATION.G_F05(i));
END LOOP;
end;
begin
FOR i IN 1..APEX_APPLICATION.G_F01.COUNT LOOP
update List_values
set
product_fk=:P900_PRODUCT_NAME,
attribute=APEX_APPLICATION.G_F04(i),
value=APEX_APPLICATION.G_F05(i)
where list_id=to_number(APEX_APPLICATION.G_F02(i));
END LOOP;
end;
Maybe someone can help me to combine them.
Thank u =)

You were missing a right parenthesis at the end of line 7.
BEGIN
   FOR i IN 1 .. APEX_APPLICATION.g_f01.COUNT
   LOOP
      MERGE INTO LIST_VALUES
           USING DUAL
              ON (LIST_VALUES.list_id =
                     TO_NUMBER (APEX_APPLICATION.g_f02 (i)))
      WHEN MATCHED
      THEN
         UPDATE SET
            LIST_VALUES.product_fk = :p900_product_name,
            ist_values.attribute = APEX_APPLICATION.g_f04 (i),
            LIST_VALUES.VALUE = APEX_APPLICATION.g_f05 (i)
      WHEN NOT MATCHED
      THEN
         INSERT     (LIST_VALUES.product_fk,
                     LIST_VALUES.attribute,
                     LIST_VALUES.VALUE)
             VALUES (
                       :p900_product_name,
                       APEX_APPLICATION.g_f04 (i),
                       APEX_APPLICATION.g_f05 (i));
   END LOOP;
END;Jeff

Massive Updating of Library. Beyond the number of imported images.

I recently Imported, as Projects, aprox 50,000 photos to my desktop Aperture Library that contained about 350,000 images. When I tried closing out of Aperture it began to Update Library telling me it had 1,334,272 images to update. That was over twenty four hours ago and it is has only processed 300,000 images in that time. At this pace I'll be waiting for days.
Does anyone know if I can force quite this process without causing damage to the catalog? Does anyone know why so many images would be getting processed when I only have about 400,000 photos maximum in the library? Even if it is processing two images per original that's nowhere near the 1.3 million it's working on. This has happened before but not nearly to this extent. This is hard to believe for a professional application. I can't do anything with my images for the next 4-5 days at this pace. Any thoughts out there? I'm hopping something is wrong and this is not normal. If it is this will be a deal breaker for me and Aperture.

Thanks for the help. However, the Updating Library window, when it is processing, does not allow me to do anything else in Aperture. I can't get to the Activity window nor can I select any of the processes to Quit. The Updating Library suspends all other activities unitl it is done. Nothing in the Aperture windows allows me to do ANYTHING. This is the reason I'm pulling my hair out. No options, no access to Aperture for however many days this is going to take. This morning it is now nearly half finished so it will be an additonal two days before I have access to Aperture again. Below is a screen shot of what I'm currently seeing in Aperture with the Updating Libraary at the top.
dbmoore wrote:
yes click on the spinning indicator so the activity window comes up. Pause or delete the operation. When opening Aperture hold the shift key to stop processing images. When you can resume till done. Cheers

Xcode crazily massive update!

I really like the new functionality of the updated version and at first I was really peeved off that I had to pay for it when Apple was already making a nice chunk off the Apps I would be putting on thier store anyways as well as the Apple computer I had to fork a small fortune out for.
The 4.25 gig download wasnt too painful as I have a good connection speed but I still question Apple's competence in not just refreshing the Xcode parts that needed updating in a smaller update (and again in 4.0.2!) rather than making the mother of all downloads your only option... they after all encourage you to split your code into simple modules so it's easier to update but dont actually practice what they preach.
The download does not automatically install itself or warn you where it went, instead you have to go hunting in your applications folder - What poor, poor effort on your part Apple, I thought you where a little more customer experience orientated than that.
It looks really sexy, is organised a lot better (apart from the fact the 'command line tool' has moved to Mac OSX only now - I'm just begining to program so small changes are a little daunting for me). All in all a nice program apart from the cost, sort of confirms Apple doesnt really give a crap about thier developers and is only interested in lining thier own pockets
There you go Apple, you got my £2.99 for doing a few tweaks and packaging it in one huge clunky file - I hope you actually grow some guilt and build a well in Africa with it instead of spending it on a personal Yatch.

an open PO is as well a PO and it works.
For contract items there is no mass update possible

Massive update for user account's passwords

Hello experts,
For our customer we need to create 100 users at QA system (for testing purposes). The idea is to set the same password for all of them. For that purpose, I will set my mail account for all these users and I will receive all the mails with every user account data and the idea is to set the same password for all of them.
Do you know if there is any way to change all the passwords at once instead of doing one by one (by accessing to the system with every user account and change its password)?
Thanks and best regards,
Isaac

Hello,
Possibility of mass password update will depend on your actual config:
- are you On-Premise or On-Demand?
- what type of directory configuration do you use? LDAP, SSO?
From within Sourcing this mass update cannot be done, but it might be possible to do with the help of the team that manages the directory itself.
Regards,
Bogdan

Massive Update Download Prob for FCP Studio / DVDSP

since a few week I will download the latest FCP 5.1.4. Update and since today the DVDSP Update. But everytime when I insert my Apple FCP Studio Serialnumber the ApplePage tells me, that I've donwloaded the latest Version ? but I do not . . . .:-?
What I must tell: I will download it from a another Mac because my Work Mac is not on LAN and only on 56k Modem.
Al previous Updates work fine with this Method, but now - not !
Any workaround ?
Thanx for help

hhhhhaaaaa, so, I called the Number . . .nad what tells the guy on the line ? Oh, that's a Problem, so the only way you can download it is via the Mac and the SoftwareUpdates Function in OSX . . . Question: So, when I move the FCP to another Mac I can't download any Update via the Apple Web Site ? mmh, yes, I think so . . . .
uuuuuhhhhh . . . I can't understand this . . .
But thanks for the tip
Karlheinz

Tiger won't start up after massive update from Apple.

Greetings Apple Discussions:
I have been using Tiger for a few months. I have my main start up on a 250 and back ups on other HDs. I updated some Apple apps from the Apple Software Update program: Apps like Quicktime, iPod, etc. The computer went into restart and never restarted—from the main start up HD. It just hangs on the Apple logo. I have to start up from other HDs. Is there something I can do to repair the main HD. I have most of the updates on it since cloning a copy of it a few months ago. I can access its contents.
Thank you.
Aubrey

Hi, Aubrey.
1. I suggest you begin troubleshooting using the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
2. An errant Startup or Login Item maybe the cause. In this case, it may be a Startup Item or perhaps a third-party kernel extension. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if an errant Startup Item is causing the problem.
3. It may be that the update did not install correctly. For example, you may have had directory corruption present before you attempted to install the update. If that's the case, or if step 1 above finds issues, even if they are corrected, then an Archive and Install would be in order. See my "General advice on performing an Archive and Install" FAQ. Perform the steps therein in the specified order.
Before installing future software updates, you may wish to consider the advice in my "Installing Software Updates" FAQ. Taking the steps therein before installing an update often helps avert problems and gives you a fallback position in case trouble arises.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Do we have a package App like " Ask the expert" updated for Apex 4.2?

I;m looking for a sample application like " Ask the expert" which was there in OBE some time back. The old package imported into apex 4.2 but the text search etc is not working for any new questions asked etc hence wanted to know if an upgraded version is available or why some function would not work?
is text search/intermedia search disabled in Apex 4.2?

They got rid of all of the packaged applications several months ago. For a while they said they'd bring the popular ones back. Then they changed their mind and said the packaged apps would become part of a cloud service somehow. Don't know where it stands right now, I stopped checking.
The given reason why the apps were removed is because they did not match the new best-practices Apex security standards. I know that the 4.1 upgrade broke a bunch of my pages because of the new session state restrictions. Possibly this is what broke Ask The Expert. I've never used it, so couldn't make an educated guess.

Update procedure from APEX 3.1 to 3.1.2 on Oracle XE database

Hello,
how to make an update of APEX 3.1 to 3.1.2 on an Oracle XE database with the full installation pack (which you get normally at OTN)? I mean the patchset 7313609 from Metalink wont work on a XE database because it doesn't have the opatch feature integrated.
Can it be the normal update procedure which I would have to use for it:
@apexins password SYSAUX SYSAUX TEMP /i/
Thanks ahead,
Tobias

Tobias,
The 3.1.2 patch doesn't use opatch since it's not patching the Oracle binaries etc, it is simply a SQL script that you run that updates the PLSQL packages, code, etc inside the database (plus the new images, javascript etc).
As such, there's no reason the patch couldn't be run on XE (assuming you are entitled to download the patch etc).
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com

Massive update in APEX

Similar Messages

Maybe you are looking for