MASSPOCHANGE: Change Overdeliv. Tol. could not be effected:ME664

Hi,
I am trying to change overdelivery tolerance from 5 to 0 in PO line item (Object BUS2012) thru PO MASS maintenance.
After executing the T.code , system is throwing below messages
     Change Overdeliv. Tol. could not be effected     ME664
     Releases already effected are liable to be reset     06684
     No data changed                                               06022
And Value is not getting changed.
I can change the same thru Tocde ME22 Manually , wondering why system is not changing it thru MASS maintenance.
Regards
Shrey

Resolve thx ...
Actually i did change the screen layout to make overdelivery field enable for data entry.
After that I need to come out of MassPOchange transaction and have to execute it again.
May be system was not referring to changes made in screen layouts
Shrey

Similar Messages

Change material could not be effected - Error in BAPI_PO_CHANGE

Dear all,
When I tried to change the material in a PO using BAPI_PO_CHANGE, I am getting error "Change material could not be effected", even though the GR not happened for that. But manually I am able to change it in ME22N Tcode. I have passed the following parameters;
1) PO number
2) PO line item
3) Material number
and corresponding entries in POITEMX also.
Please provide the solution. Reward points for the helpful answer.
regards,
Chandra.

Hi dinesh,
I tried to chagne material and that is not MPN material. I think there is no dependency in material number value.
Regards,
Chandra

Operation ' Change Attribute TSTATE ' could not be carried out for Request

hi,
i am unable to delete the request Id from DSO. and when i checked that, it says request is partially activated(error occured during the activation)
and when i checked the logs i got the following error messages:
Operation ' Change Attribute TSTATE ' could not be carried out for Request 609249
Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row ' 361'
i even thought it was BASIS issue but it was not.
due to this error the process chain is failing daily
kindly help
regards
laksh

hi arvind,
i tried using the both the methods you had mentioned, i am able to delete the request at that moment but its again coming back, i think as it is a partially activated request so may be that is why it is happening
but the problem is still there
regards
Laksh

Operation ' Change Attribute TSTATE ' could not be carried out

Hi All,
When I attempt to compress an infocube I get the following error messages:
@5C\QError@ Operation ' Change Attribute TSTATE ' could not be carried out for Request 1114486
@5C\QError@ Termination in problem report 'RSS2_DTP_RNR_SUBSEQ_PROC_SET' in row '255'
I checked the request 1114486 in infocube and saw that its status is green however the overall status in the load monitor was "deleted".
How can I fix the problem with this request ?
It is a very old request and it was already uploaded to several other targets.
Thanks in advance..
Berna

hi,
It can be due to large data volume which might require more system resources then usual, see if there is any dump related to this in ST22, Also check whether any request is currently running on cubefor data loaded to cubeor getting load to further targets
try compression for less requests say 3 or 4, see if it works or not
hope it helps
regards
laksh

ME664 Change could not be effected

transactions MEMASSCONTRACT or MEMASSSA gives error:
ME664 Change could not be effected

This field is not changeable after the purchase order is created.
If you want modify it you can only make a report to do it under your own
risk and test if the behavior is the correct you expected.
In the standard it is not possible to do this.

Changes to php.ini not taking effect

I'm running Leopard 10.5.8 with the Apple-supplied versions of PHP (5.2.10) and Apache (2.2.11). Changes made to the /etc/php.ini file are not taking effect after stop/start of Apache. phpinfo() and shell command php -i confirm the 'status quo'. The php.ini file permissions are 444 with root/wheel ownership. It was copied from the php.ini.default file that came with the php distribution. Here's what I'm trying to change - seems pretty like this should be pretty basic stuff:
include_path = ".:/usr/local/some_directory"
// Original entry in the php.ini.default file was commented out
// The directory '/usr/local/some_directory' exists
// phpinfo() only shows include_path = .:
magicquotesgpc = Off
// Original entry in the php.ini.default value was 'On'
// phpinfo() shows magicquotesgpc = Off
I've been all over the php.net website and cannot identify my error. Shouldn't the changes to the php.ini file should be interpreted immediately after restarting Apache?
Has anyone experienced a similar problem? Suggestions for fixing this malfunction would be greatly appreciated. I know I can hard code workarounds into my PHP code but that really defeats the whole purpose of even having a php.ini file....

Was able to successfully implement these changes on a different Mac OSX 10.5.8 system. Different architecture (1st system is MBP, 2nd system is MB) although each system has all software updates installed and is up-to-date. Copied php.ini file from MB to MBP and problematic settings were corrected. Ran /developer/applications/utilities/filemerge.app to check for differences between the two php.ini files. Found one (line 305):
Failing entry: error_reporting = E_ALL
Working entry: error_reporting = E_ALL & ~E_NOTICE
I took out E_NOTICE to help with debugging as per instructions from php.net/manual/en/errorfunc.configuration.php
Go figure....

Changes to policy are not taking effect on windows 2000 workstations

We are currently running zenworks ver4. We have an XP 2000 mix
enviorment. When we make changes to the policy on XP the changes work.
When we make changes on the 2000 policy they do not take effect. I did
give the user local admin rights and that did not help. We are running the
latest client as well and installed the recent patches on the server.
Dan

Yes, Actually after looking into the problem some more it looks like the
changes are taking effect. The only problem that we are having is that
the start bar does not appear when the user log in and no drives are
showing up under windows explorer. I checked the policy and we did not
configure the section under windows explorer so i am not sure why the
drives are not showing. Also I am not sure why the start bar does not
appear.
Dan

Authorise Change request action could not be successfully executed

Hi Gurus,
I have done the customization in the sdcr actions. twice i have checked the configuration. i hope all the settings are correct.
But when I try to execute the action in crmd_order (authorise change request), It's not triggering any thing.
I have done the below
1) copy the sdcr profile to zdcr profile
2) added the new status profile in the desired status
3) Copied the action and added my action
4) Defined the condition
Can you please help me to resolve the issue
Thanks & Regards
Venkat

Hi
This might help
[Re: CHARM: No Actions are Displayed|Re: CHARM: No Actions are Displayed]
Thanks,
Jansi

Partner of partner function SLFN0003 could not be changed

Hello,
I want to resolve the Support Team by Category instead of SAP Component.
The Support Team is determined by the Rule AC13200137 and uses the
Category instead of SAP Component to determine the correct Support
Team (SLFN0003).
I've tested the rule and agents are resolved correctly
according to Category.
When the a service record is created the initial resolution for the
Support team is successful based upon Category.
However, when the Category is changed after the Support Team has been determined, the Support Team cannot be updated when the document is SAVED. In the Transaction Data -> Action ->
Process logs displays the following error:
Date: 13.02.2008 Time: 16:44:59
Processing CRM_DNO_PARTNER_1 Is Started
Partner of partner function SLFN0003 could not be changed here
Action could not be successfully executed
Analysis:
When the Support Team field on the CRM_HEADER is NOT empty the resolution by Category cannot update the Support Team field.
The workaround when a Category has been changed is to clear the Support Team field then SAVE then the Support Team is resolved correctly to reflect Category changes.
Is there a method to FORCED the overwrite the Support Team field when the
Category is changed?
Please advise.
Regards,
Latief

Hi Raquel,
Thank you very much for your quick response. Unfortunately, I had to wait for an ABAP'er to make the necessary changes. Your feedback was helpful and points have been allocated accordingly.
Below is an extract of the code applied to the functional module "CRM_DNO_UPDATE_PARTNER" to allow overwriting the Support Team field when already determined and the CATEGORY field has been changed.
read partner of crm transaction
    CALL FUNCTION 'CRM_ORDER_READ'
      EXPORTING
        it_header_guid       = lt_header_guid
        iv_mode              = gc_mode-display
        it_requested_objects = lt_req_objects
      IMPORTING
        et_partner           = lt_partner
      EXCEPTIONS
        OTHERS               = 0.
    READ TABLE lt_partner INTO ls_partner
         WITH KEY ref_guid    = iv_header_guid
                  partner_fct = iv_partner_fct.
    IF sy-subrc = 0 and ls_partner-partner_no <> space.
*{   REPLACE        SODK900090                                        1
*\      MESSAGE e116(com_partner) with iv_partner_fct
*\              RAISING partner_fct_maintained.
    If the Support Team is unchanged, simply exit.
    Otherwise delete the existing entry.
      if ls_partner-partner_guid = iv_partner_guid.
        exit.
      else.
      fill partner data
        move-corresponding ls_partner to ls_partner_com.
        data:
          begin of logical_key,
            ref_partner_handle     like ls_partner_com-ref_partner_handle,
            ref_partner_fct    like ls_partner_com-ref_partner_fct,
            ref_partner_no     like ls_partner_com-ref_partner_no,
            ref_no_type        like ls_partner_com-ref_no_type,
            ref_display_type   like ls_partner_com-ref_display_type,
          end of logical_key.
        move-corresponding ls_partner to logical_key.
        clear: ls_partner_com-partner_fct, ls_partner_com-partner_no, ls_partner_com-display_type, ls_partner_com-no_type.
        INSERT ls_partner_com INTO TABLE lt_partner_com.
      fill input fields
        ls_input_fields-ref_guid    = iv_header_guid.
        ls_input_fields-ref_kind    = gc_object_kind-orderadm_h.
        ls_input_fields-objectname = gc_object_name-partner.
        ls_input_fields-logical_key = logical_key.
        ls_field_names-fieldname = 'PARTNER_FCT'.
        INSERT ls_field_names INTO TABLE lt_field_names.
        ls_field_names-fieldname = 'PARTNER_NO'.
        INSERT ls_field_names INTO TABLE lt_field_names.
        ls_field_names-fieldname = 'DISPLAY_TYPE'.
        INSERT ls_field_names INTO TABLE lt_field_names.
        ls_field_names-fieldname = 'NO_TYPE'.
        INSERT ls_field_names INTO TABLE lt_field_names.
        ls_field_names-fieldname = 'KIND_OF_ENTRY'.
        INSERT ls_field_names INTO TABLE lt_field_names.
        ls_input_fields-field_names = lt_field_names.
        INSERT ls_input_fields INTO TABLE lt_input_fields.
         clear: ls_partner_com, ls_input_fields, ls_field_names.
       endif.
*}   REPLACE
    ENDIF.
ENDIF.
Your assistance is highly appreciated.
Kind Regards,
Latief

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 into Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file'. This has not happened before. How do I change this?

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Siebel responsibilities changes will not take effect unless restarting serv

I am having a problem in Siebel where I change the responsibility for a user and then I go to Application administration--.responsibilities and clearing the cache for the changes to take effete however the changes are not taking effect unless I restart the Siebel application services which I cannot do anytime I need to change the responsibility for a user especially that I have 3 Siebel servers. If anyone experienced this issue of have a solution I would appreciate the assistance. I am having this issue in 3 environments, dev test and prod. I am using LDAP authentication for the Call Center AOM and one of my test labs I am using DB authentication but I am having this problem as well.
Thanks in advance for the assistance.

The reason is most likely due to the fact that you ObjectManager Session is running within a different MT Server process then that of the other use. When you click the clear cache button it only clears the Responsibility cache of the Object Manager process (PID) where you session is running. This would explain the reasoning shared about the multiple languages as when connected to theENU object manager you'd be clearing that object managers cache but not for the other languages.
This however would only be working if there were only a single Object Manager process running per language.
If you are familiar with the Server Management/Configuration screens you could try doing a Server Component Reconfiguration for the Object Manager in question, then asking the user to logout and log back in. The Reconfiguration process will allow currently running user sessions to continue while new session will be directed to a new Process Id (PID) - aka Multi-Threaded(MT) Server process for the Object Manager.
This should take care of all instances of the Object Manager across Servers within your enterprise without requiring a Server Restart.
JES

After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy

I have just downloaded the trial After Effects CC. I'm running Mavericks 10.9.4 on my Macbook Pro.
When I try to launch After Effects, this message appears:
"After Effects warning: Could not create the file '/Users/Library/Preferences/Adobe/After Effects/13.0/dummy'"
I have followed the advice from other posts on this issue regarding resetting all of the permissions in the Adobe folder in my library to read and write , but it doesn't change anything. I still get the same message when I try to launch the program. Moreover, there is no After Effects folder in my Adobe folder, even though it's clearly in my Applications folder.
I also uninstalled After Effects and tried to reinstall it, but to no avail.
I sure would like to give it a try, as I was planning on purchasing it, but this is just one more issue in a long irritating line of issues that have arisen since trying to download it from CC.
Any help is much appreciated.
Thanks.

I am having this problem and this response does not make sense. I made the "Preferences" ,"Adobe" & "After Effects" folder along with the 10.0,11.0,13.0,13.2 folders all read/write. Can't seem to find an answer.

Gnome battery icon and 'Could not change DPMS mode'

Hello,
I run my Arch with latest Gnome (3.2.1) and lately, my battery icon disappeared. Then, after some reboot it showed again (without changes to configuration, packages etc), and now its gone again, for good it seems.
My .xsession-errors output is:
/etc/gdm/Xsession: Beginning session setup...
localuser:ironhalik being added to access control list
/etc/gdm/Xsession: Setup done, will execute: /usr/bin/ssh-agent -- gnome-session
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
GNOME_KEYRING_CONTROL=/tmp/keyring-fufDqS
SSH_AUTH_SOCK=/tmp/keyring-fufDqS/ssh
GPG_AGENT_INFO=/tmp/keyring-fufDqS/gpg:0:1
(gnome-settings-daemon:1442): power-plugin-WARNING **: Unable to start power manager: Could not change DPMS mode
** Message: a new manager occured at org.globalmenu.manager, :1.2
Initializing tracker-miner-fs...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-miner-fs.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-miner-fs.log'
Initializing tracker-store...
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Tracker-Message: Setting up monitor for changes to config file:'/home/ironhalik/.config/tracker/tracker-store.cfg'
Starting log:
File:'/home/ironhalik/.local/share/tracker/tracker-store.log'
(tracker-store:1541): Tracker-CRITICAL **: D-Bus service name:'org.freedesktop.Tracker1' is already taken, perhaps the daemon is already running?
** Message: a new manager occured at org.globalmenu.manager, :1.2
e-data-server-ui-Message: Unable to find password(s) in keyring (Keyring reports: No matching results)
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: a new manager occured at org.globalmenu.manager, :1.2
Failed to play sound: File or data not found
** Message: applet now removed from the notification area
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:310: Setting primary store IDs to defaults.
(gnome-shell:1497): folks-DEBUG: individual-aggregator.vala:338: Primary store IDs are 'eds' and 'system'.
JS LOG: GNOME Shell started at Mon Jan 23 2012 02:16:40 GMT+0100 (CET)
Window manager warning: Log level 32: a new manager occured at org.globalmenu.manager, :1.2
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
** Message: a new manager occured at org.globalmenu.manager, :1.2
** Message: applet now embedded in the notification area
(tracker-miner-fs:1513): Tracker-WARNING **: Couldn't properly parse desktop file 'file:///usr/share/applications/brasero-nautilus.desktop': 'Desktop file doesn't contain type'
** Message: a new manager occured at org.globalmenu.manager, :1.2
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1696): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /open=false
refresh /0/open=false
refresh /open=true
refresh /0/open=true
path = /0, item is 0x963ec28
refresh /1/open=true
path = /1, item is 0x963ed60
refresh /3/open=true
path = /3, item is 0x963f100
refresh /open=false
refresh /3/open=false
(gnome-shell:1497): St-CRITICAL **: setup_framebuffers: assertion `width > 0' failed
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
(gnome-shell:1497): St-WARNING **: Ignoring length property that isn't a number
** (leafpad:1716): DEBUG: gtk-menubar-gtk2.vala:25: map called
** Message: a new manager occured at org.globalmenu.manager, :1.2
refresh /open=true
refresh /0/open=true
path = /0, item is 0x9343c18
refresh /open=false
refresh /0/open=false
Any ideas?
Thanks

Ok, I reinstalled gdm, added my user to the video group and so far it seems to be working properly, so thank you very much.
Now I just need to see if it will stick that way, since it seems to come and go somewhat randomly.
And btw, I use the presentation mode shell extension, but disabling it did not have any effect.
EDIT:
Ok, it seems the source of the problem was this little addon to /etc/gdm/Init/Default, that I used to launch synergy in GDM:
/usr/bin/killall synergyc
while [ $(pgrep -x synergyc) ]; do sleep 0.1; done
/usr/bin/synergyc 192.168.0.2
Since synergy controls the display power state, it would add up.
Last edited by ironhalik (2012-01-23 19:09:43)

I am trying to download iTunes on to my laptap but I keep getting a "Could not open key: UNKNOWN\Components\ with a bunch of numbers and letters following. I have uninstalled all the iTunes programs. I changed the Regedit but I still get the error?

I am trying to download iTunes to my laptop but I keep getting this "Could not open key: UNKNOWN\Components\ followed by a bunch of numbers and letters. I have unistalled iTunes and all the other apple componants. I also used followed this http://discussions.apple.com/docs/DOC-3581. But I am still getting the same "Could not open key:" error and it tells me that iTunes could not download.

On occasion, when changing ownership or permissions has no effect on the UNKNOWN\Components\ error, the fixit from the following Microsoft document sometimes works:
Fix problems with programs that can't be installed or uninstalled

"could not load any writer" when changing render settings?

When I change my render output settings from Quicktime Movie to something like H.264, I get an error saying "could not load any writer, adobe media encoder will now exit". Does anyone know how to fix this?
When I select Quicktime Movie then change the compression type to H.264, After Effects then tells me "for reliable output with H.264 compression, please choose it directly fro the Output Module..." which then puts me right back where I started with this posting.
Any suggestions?
Thanks!
Kristin.

@Kevin: The MPEG stuff being defunct should not affect fresh installs. So it's definitely some other app "stealing" the CoDecs. In what order are you installing? Perhaps having Nero, some DVD-player software or something similar inbetween? Did you deactivate the products before re-installing? what formatting options did you choose?
@kristin: As Jonas said, check QT. In addition, I would attempt yet another re-install, but this time taking care to really manually survey the progress. I'm suspecting that some of your files never get overwritten, so the config issue remains in place and your modules don't show up. So deactivate the app, uninstall it, run the CS3 clean scripts. Before re-installing, check your Library/Application Support/Adobe directory and the Preferences directory. Rip out any pieces that look suspicious and may be related to After Effects or Premiere/Encore, in particular MediaCore. Furthermore, remove any installer logs and remnants in the respective directories (Library/Logs, library/Application Support/Adobe/Installers). The packages are recognizable by their icon and the logs have the respective names of the product.
Mylenium

MASSPOCHANGE: Change Overdeliv. Tol. could not be effected:ME664

Similar Messages

Maybe you are looking for