Master 3 with scsi
I am interested in purchasing a master 3 or similar board, and keeping finding myself back to this forum. I am new to scsi and raid. I have just installed raid1 on two sata drives on my current computer, but I am not content with the speed. I was wondering how many scsi devices can be installed on the master 3 as is, and if raid can be configured using the scsi connections.
Well, as far as I know it's SCSI-320 that's on the board.
So it should be able to connect at least 15 drive's to it, depends a bit on the controller because it could be even more
Don't forget the put a terminator at the end of the cable or the entire chain will get unstable.
For Raid 0+1 you need 4! drive's....
Better use RAID5 as that one will do with 3 drive's min and give mostly the best speed.
With 3 drive's in RAID 5, you get about the speed of 2x normal (1 disk) and it has a very good fault tolerance, you can take 1 drive out and put a new one in (while running!!!!!) and the RAID array can be rebuild during running, no need to shutdown at all....
The only thing is, all 3 drive's (or more if you like) must be the same size or bigger then the smallest one, as the size of the smallest will be used to build the array.
Similar Messages
-
Report For list of material Master with PO text
Hi all,
I need a report whether it is available in Standard SAP or a customized, for List of Material Master with their PO text.
If any one can help, please reply to this theard.
Regards,
Kapil KulkarniTo get the material number combined with the PO text you will need the help of an ABAP programmer. The programmer can create a report for you using the function module READ_TEXT in the function group STXD. The tables to use are:
STXH - STXD SAPscript text file header
STXL - STXD SAPscript text file lines
The selection screen should have at least the following:
OBJECT - STXH-TDOBJECT
NAME - STXH-TDNAME
LANGUAGE - STXH-TDSPRAS
TEXTID - STXH-TDID
You find the information for these fields by going to the PO text entry screen and displaying the header information under Goto -> Header. For materials, the object is MATERIAL, the name is "material number", the language is "EN", and the text ID is BEST. You can use this program to get long text in lots of places like information records, purchase order texts, etc.
Hope this helps. -
Creation of Customer Master with Sales Data
Hi Experts,
I have a requirement in whic i have to Create/Change Customer Master through Custom program.
The Customer Master details will be stored in file and Retrieved through program with the following Tables to be Updated
KNA1 - Customer Master
ADRC - Address
ADR2 - Telephone Number
ADR3 - Fax Number
ADR6 - E-Mail Addresses
KNVV - Customer Master Sales Data
KNVP - Customer Master Partner Functions
KNVK - Customer Master Contact Partner
From SDN i came to know about CMD_EI_API . Can you please tell me which is the method suitable for Creation/Change of Customer Master with the above details.
Regards,
Shrikanth RHi Experts,
Please help me how to use MAINTAIN_BAPI method in Class CMD_EI_API in order to create Customer Master.
Regards,
Shrikanth R
Edited by: SHRIKANTH R on Jul 15, 2010 11:59 AM -
(JHeadstart release 10.1.2.) I can make a master with multiple detail pages work (displayed on the same page or different pages), except under one condition. Assume the following situation:
Master: View object A based on entity A
Detail 1: View object B based on entity B with a modified WHERE clause
Detail 2: View object C based on entity B (yes, same entity object as view object B) with a WHERE clause different than the one for view object B
A one-to-many view link exists between view object A and view object B, and another exists between view object A and view object C. The query for each of the view objects is standard (i.e., no expert-mode queries). The master and the two detail view objects (via their respective view links) are assigned to an application module.
I created a JHeadstart application structure file for the application module with Struts and UIX. I added view object A as the top group (table-form layout). I next added view object B as a detail group (form layout, same page) beneath view object A. I finally added view object C as a detail group (form layout, same page) beneath view object A (i.e., parallel to view object B). The module generated and built cleanly.
I ran the application, entered a master record, and saved the data. When I pressed the button to create a new record for detail 1 (view object B), fields appeared for the pages for detail 1 and detail 2 (view object C), not just detail 1. Also, the value of the Descriptor Attribute from the master record that linked it to the two detail pages populated the corresponding field in both of the displayed pages for the detail records.
This behavior does not occur if view object C (detail 2) is based on an entity different than view object B. Will JHeadstart allow a master to have multiple details where the details are based on the same entity object? Thanks.
RayRay,
Unfortunately I cannot reproduce the problem. I filled in the A, B and C using a scott/tiger schema as follows:
A: Departments
B: All employees having a salary < 1000
C: All employees having a salary >= 1000
Then I created an application module with one group having two subgroups everything same page, just like you specified. Everything seemed to work fine. Do you have any idea what's different in your situation.
Aard-Jan van Kesteren
JHeadstart Team
Oracle Consulting -
Creating a Master with Two Detail report style
In a Group-Above report data model, how does one add a 2nd detail group appearing at the same hierarchial level as the 1st group?
The report already exists with MASTER and detailA. I need to add detailB and tie it to MASTER just like detailA.
|MASTER|
|detailA||detailB|
\-------/\-------/Amjad,
Thanks for the reply. My question relates to your suggestion #1: How does one create detailB in the data model?
The only thing I have been able to do is to create a 2nd query linked to the 1st query. This makes the data model look like it has two masters each with one detail. What I want is a single MASTER with two details.
Are you suggesting that the only way to accomplish this is by having two queries, one linked to the other, as in the crude rendering shown below?
|MASTER1||MASTER2|
|DETAIL1||DETAIL2|
The above would be displayed in the data model as follows:
|__Q_1___||__Q_2___|
|G_DETAIL1||G_DETAIL2|
\----------------/\----------------/ -
Master with more than One details
Dear All,
i am using Apex 4.2, oracle database 11g R2 and internet explorer 9.
I have three tables,A,B and C.
A is master table.
B and C are details tables for A.
how could i create a master with 2 details form in such a way that data entry are possible in both the details ?
i search internet, but am failed with this.
kindly guide accordingly.
Regards.hai , please through the link and see the page source code.http://apex.oracle.com/pls/otn/f?p=4550
application: 32172
workspace: ram_r&D
user/password: aramani/apex
=============
DB script will be in:
HomeApplication BuilderApplication 32172Shared ComponentsStatic Files(legal script.sql) -
Master with more than one Detail
Hallo,
Does anybody know how to create master with more than one detail. i.e
Employee as a master with the following details
(Dependent, Education, Contract, Job History).
thanks..
RibhiRibhi,
A master detail form typically consist of a master form and a tabular form for the detail records, i.e. you can edit your detail records on the same page as your master record. Since you can only have one tabular form per page, having multiple of these detail tabular forms, won't work. However you could instead create your master-detail form with the option of creating the detail as a read-only report, which would have an edit link on each detail row, that would take you to a form to edit each detail row individually. With this model, you could just add additional reports after the initial creating of the master-detail form.
Regards,
Marc -
Is it possible to create a customer master with different address
Hi Gurus,
Is it possible to create a customer master with different address as we maintain in SAP CRM.
Kindly help me onthis issue \
Regards
KannanHi Kannan,
There are no multiple addresses but you can use multiple unloading ponts for the same address for the ship to Party.
So when you create a Sales order the system will give a pop up with the unloading points allowing you to select the desired one.
I hope I understand your query correctly.
Regards
Yogesh -
After burning original master with No copies allowed, How to make 1000 copies.
After burning original master with No copies allowed, How to make 1000 copies?
I am authoring a DL DVD disc for a Yoga Institute, after burning original master with No copies allowd condition using, CGMS - CSS conditions, How to make 1000 copies.
If I buy DVD duplicator ( replicator?) and hook up to PC via USB , then use the duplicator burner to make copies, how it works. As I tried on www days, after days, burning my eyes, all information is confusing.
This is challanging project and I am entering newly in the market. So this is my death or life. Please help.
OS WIN7 64 bit, CS5.5 Master Collection
Encore Version 5.1.0.342
Thanks in advanceThank you Chris and Stan,
Now I got little true idea how it works.
Copy protection is not my idea, as the Yoga intitute is a non profit organization, very little is also very important for them to run the place.
Every little help counts.
What are the other good options to do in house.
Can you please suggest any links for " in detail study."
Again thank you all of you and thanks to Adobe staff also
Aradhana -
Hello Marvel team and Others,
Is it possible with thee html db wizard to create a page contaning a master with more than one details ?, I think no , please if No, can I do it manually ? Any ideas are welcome.
This is my need :
The same page mmust contain :
udpatable items for the master
updatabee report for each detail
insert details for an existeing master
delete details from an existing master
insert a new master with his details
deletee a master, of course with his details
Jina.The Add Rows button submits the page and re-renders it with additional N rows in that region. Any changes made in that region will be saved.
Perhaps what you need is some client-side DHTML/Javascript to dynamically add some rows in your tabular form.
See
Re: Copy Values From Tabular Form for a discussion about that and an example at http://htmldb.oracle.com/pls/otn/f?p=24317:227
But all this is straying far outside the out of the box functionality and you have to write everything yourself. You should re-evaluate some of your business requirements before going down this path.
In other words, having a master-detail-detail, all of them editable, one global SAVE button for all of them, client-side Add Rows functionality, and all on the same page...is a highly unusual UI.
Good luck. -
Examples of Master with multiple details
Hi Leo,
I want to create Master with multiple details
I have been trying for the similar example (Master with multiple details) for long time.
It seems in the following link, you have mentioned that you have done such examples.
Examples/Demos of APEX applications with Master with Multiple Details.
Can you please share the solution to my emaid address [email protected]
Or can anybody help me to get such solution with examples step by step.
I would highly appreciate for any help.
Thanks.Ok, so here's the rundown.
Create a page with one "master" html region. In that region create your standard text/date/etc. items. Make sure that one of these is a hidden key field that is the key linking the master and details portions. Use a calculation to pre-populate the field from a sequence (or whatever uniqueness generator you choose). It is important to generate this key up front for the processing.
Next I created one report region for each detail table I wanted to link in. Make sure to count the total number of fields you want to work with and that the total is LESS than 50. This is critical. The report should be selecting the columns from APEX_COLLECTIONS for display and manipulation on the screen. It is best to explicitly associate these to the Javascript column numbers now. I used a process to pre-populate my detail entry areas with default values for ease. I also included a button to add a row to each area, but you have to be careful here to use a good combination of form attributes so that the page refreshes don't SUBMIT yet.
Once you have a report region generated from APEX_COLLECTIONS, you have to create the update processes that pull the information from the user modifications into the collection. This is the trickiest part of the whole thing. You have to use the APEX_COLLECTION.UPDATE_ITEM method, and you have to refer to the JavaScript column numbers for the source value and the collection column number for the destination. It is really easy to get these confused - I advise putting this all into a document or on a whiteboard for reference.
Once you have the update processes written (I prefer writing one update process per detail section), write your processes to write the data to the database. Again, I suggest one process for each detail table. Trigger them to fire on submit.
I also suggest creating a debug page to display all of the various collections and to help keep things straight. Once you have one detail area working, it is easier to get the others working.
If you need actual code snippets, let me know and I'll see what I can do. -
I have a master with multi-detail pages. I would like to have the master record appear on the top of each screen and have the user select one of the multi-tab pages to select which detail information they would like to see.
Is this possable with Forms 6i and if so how do I put them together. When I tried to create the form I could see the master and detail together ONLY when I navigated to the detail records.
To carry this a step further is it possable to have Multi-masters each with their own tab and each master have detail tab pages?
ThanksYou could try the following:
Create 1 canvas and place the header items on the top portion. Create another canvas - Tab type and place or create all you tabs with the details on then. Then stack the tab canvas on top of the main header canvas, resize so that the header is visible an that is it. -
How to create a material master with referrence to exsisting material maste
hi experts
how to create the material master with reference to an existing material master ?
please explain in steps
regards
jaiDear,
It is very simple.
Enter MM01 t-code.
Enter your existing material code in field of reference material code.
If your material number range is external number range then enter number of material otherwise direct enter industry sector and material type.
After enter basic detail system ask you plant/storage location detail and view detail.
Select reference plant and storage location in left sight of diglog and enter plant and storage location in right sight of diglog screen for which you want to maintain material master.
Then click on all view, If you want to change some detail change it.
Due to reference material all detail is come from reference material.
Then click on save.
NOTE: - You can create new material with reference of old material but it is prerequest material type should be same of both material old and new.
Regards,
Mahesh Wagh -
Master with two details(child) relation?
Hi guys,
I 'd like to have a Form with one master table and two detail tables.
The business component wizard doesn't allow
me to create this relation.
Although these two details table are logically children of the master but have not defined specifically Foreign key for them on table/database level.
I created Associations via JDev3.1 to join
these master with details, but still business
component wizard didn't allow me to have
one master and two details.
Do i have to create foreign keys to join children to master on database level or
I can create an association with JDev? How?
Thx
Ali
nullYou could use "New"/"BC" and create a ViewLink with the same name as the FK Assoc. If you edit the PackageModule, you should be able to see your FK link in there.
-
Mandatory in material master with material type wise
Dear all
Is it possible to make a field mandatory in material master with material type wise?
kindly helpHi
See the below config
Check in OMS2 for your material type for "field reference". then
Spro>logistics general>Material master-->field selection.
Here you need to group required fields under one field selection group. then in Maintain field slection for data screen, you can make Field group madatory for the field reference (material type)
If required take help from MM consultant
Regards
Antony -
Please help me with scsi HD Problem
Please help me with scsi HD Problem.
Hi for the life of me I cant resolve this.
I have a ms-6378 ver.3 board with 1.1g AMD
i could not install windows 2000 on a Seagate 73Gig 68 pin SCSI Drive ultra wid. after giveing up i added a IDE HD and install win2k SP2 and added the SCSI card all still worked ok
but as soon as i added the hardrive it locks up and it will
not compleat the load of win2k and tried a smoler drive 18Gig 68 pin SCSI Drive. but it will not load windows 2000. i am stumpt. ;(It sounds like an IRQ conflict. Make sure you diable the primary and secondary channels for the IDE ports to free up the IRQ resources for the SCSI drives. If you are using a separate SCSI controller, make sure it is in the proper PCI slot and does not share IRQ's with other cards.
Maybe you are looking for
-
How do I install OS software on a erased hard drive all I get is folder icon with blinking ?
Trying to install OS10.6 on erased hard drive but just getting folder with blinking ? symbol any ideas?
-
When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out. Any ideas how to fix this?
-
Sun app server problem using asadmin tool
I have installed sun app server and trying to do the simplemessage tutorial. When I run the ant create-cfcommand I get the following [exec] Invalid user or password [exec] CLI137 Command create-jms-resource failed.I have put an echo line in app-serve
-
# is displayed where Numbers should be displayed.
hii, I am new to to c# programming as well as to cyrstal reports.when ever my reports are generated # character is displayed instead of numbers.kindly help me to resolve this problem. regards N.Nekte Moderator message: please post in the correct SCN
-
Dear Gurus, I have to collect all the queries along with their respective roles. Can any of you please let me know if there is any table which stores the data needed. Thanks In advance. -Mohan Kumar