Master and Text Flags in Table

Dear Gurus,
Is there any Table which hold Master and Text flags check in BI system for the Infoobjects.
Abhijit

Pls check the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/3a/14c43bb7137503e10000000a11402f/content.htm
Hope this helps.
Regards
CSM Reddy

Similar Messages

How can i do to see the master and text values of the Key figure 0UNIT

Hi gurus,
How can i do to see the master and text values of the Key figure 0UNIT, please step by step, i m in the key figure 0UNIT but i want to see if the UNIT for example BX = BOX, something like this is that i want to check, thanks!

If you look at the unit tables, you will see the values and texts. It's in SPRO, not in RSA1. My access is limited on my system here, but the documentation says to go to t-code CUNI. I believe in that tcode you can look at all of the unit equivalencies and what each unit's text is ..... like an ea means each; KG = Kilogram; etc...
I am on an 3.x system, so in SPRO I go to BW CIG=>General Settings=>Check units of measurement.
Brian

Amortization Start Date and Amotize flag which table

Hi All,
From which table and what are the fields that I can get the Amoritize Adjustment ( Flag ) and Amortisation start date which I can enable in the books screen of the asset.
Thanks and Regards,
MPH.

Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks

How are attribute and text master data tables linked in SAP R/3?

Hello,
how are attribute and text master data tables linked in SAP R/3?
Most tables with attribute master data like T001 for company codes,
have a text master data table T001T (add "T" to table name).
When looking at the content of table T001 via transaction se11,
the text are automatically joined.
But for some tables there is no "T"-table (e.g. table TVBUR for sales offices
has no text table TVBURT), but in se11 you get texts. There is an address
link in TVBUR, but the Name1, etc. are empty.
a) Where are the text stored?
b) How does the system know of the link?
Hope someone can help!
Best regards
Thomas

Hi Thomas
The master and text table are not linked by name, of course, if you see the text table, it has the same key fields of master table, only it has the field key spras and the field for description.
The link beetween the tables is done by foreign key: if you check the text table TVKBT u need to see how the foreign key for field VKBUR is done:
-> Foreing key with table TVBUR
-> Foreing key field type -> KEY FIELD FOR A TEXT TABLE
->Cardinality-> 1-:CN
It's very important the attribute sets for Foreing key field type, if it's KEY FIELD FOR A TEXT TABLE, it'll mean the table is a text table: i.e. that mean the master table is a check table for the text table, where the foreign key type is for text table.
U can find out the text table of master table by SE11: GoTo->Text Table
U can fined some information in table DD08L.
Max

QM action not allowed for DTP requests in master data and Text tables

Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank you

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

SID table in the general tab and master data/text tab

Hello Bi Experts,
For example 0material Info-object:
There is a SID table in the general tab i.e /BI0/SCOMP_CODE
There is another SID table Attribute in the master data/text tab i.e /BI0/XCOMP_CODE,here there are Nav attributes with name S__0COMPANY.
When i got 0company info-object it got its own SID table i.e /BI0/SCOMPANY
Can some body explain me what is significance of SID table Attribute in the master data/text tab and what is difference with SID Table of attribute?
Cheers,
Stalin

Hi,
SID is surrogate ID generated by the system. The SID tables are created when we create a master data IO. In SAP BW star schema, the distinction is made between two self contained areas: Infocube & master data tables/SID tables.
The master data doesn't reside in the satr schema but resides in separate tables which are shared across all the star schemas in SAP BW. A numer ID is generated which connects the dimension tables of the infocube to that of the master data tables.
The dimension tables contain the dim ID and SID of a particular IO. Using this SID the attributes and texts of an master data Io is accessed.
The SID table is connected to the associated master data tables via teh char key
Sid Tables are like pointers in C
Tables Starting with Description:
M - View of master data table
Q - Time Dependent master data table
H - Hierarchy table
K - Hierarchy SID table
I - SID Hierarchy structure
J - Hierarchy interval table
S - SID table
Y - Time Dependent SID table
T - Text Table
F - Fact Table - Direct data for cube ( B-Tree Index )
E - Fact Table - Compress cube ( Bitmap Index )
For more info go through the belwo link
http://www.sap-img.com/bw010.htm
Regards,
Marasa.

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Adding New Image and Text to an Existing Page Created with Tables

Working in DW 5.5
I'm trying to add a new image/link and small amount of text to an existing web page that was created with tables and centered. I am using AP Divs. One for the image and one for the text. Everything functions fine, but I can't get the new items to anchor and re-center with the rest of the page. I am not able to overide the "Absolute Positioning". I've tried different solutions from various tutorials but I can't seem to make them work with tables.
The added items are a Facebook button and text.
Go to: http://www.sugarhollowfarms.net/index.html to see the problem.
Please help. I'm not that experienced.

Make a back-up of the page first before you implement the changes below!
Take the below bit of code from <div id="FBlogo">...... to.......... </div> 
and insert it directly after the opening div tag FWTableContainer and before your opening table tag (see position below):
<div id="FWTableContainer209091602">
<div id="FBlogo"><a href="#"><img src="images/fb.png" alt="fb" width="62" height="62" onClick="MM_openBrWindow('http://www.facebook.com/SugarHollowFarms','facebook','toolbar=yes,location=yes,status=yes, menubar=yes,scrollbars=yes,resizable=yes,width=1000,height=800')"></a>
<p class="bodytext"><strong>Join us<br>
on Facebook</strong></p></div>
<table border="0" cellpadding="0" cellspacing="0" width="800">
Then add - position: relative; - to the FWTableContainer css (as shown below):
#FWTableContainer209091602 {
    /* The master div to make sure that our popup menus get aligned correctly. Be careful when playing with this one. */
    position:relative;
    margin:auto;
    width:800px;
    height:600px;
    text-align:left;
    top: 20px;
    background-image: url(images/homepage_new3.jpg);
    border: medium solid #336600;
    position: relative;
Amend the css for FBlogo to as below:
#FBlogo {
    position:absolute;
    left:700px;
    top:380px;
    width:91px;
    z-index:1;
    text-align: center;
Amend the css for bodytext as below:
.bodytext {
    font-family: Verdana, Arial, Helvetica, sans-serif;
    font-size: 11px;
    line-height: 13px;
    margin: 0;
    padding: 0;

Building index from multiple master and child relationship tables

Hello,
My question is:
Is it possible to create the index for master and child tables?
If yes, can you please point me out to any links or give me an example.
Actually i just followed this below link to create the index using multiple tables
Building index from multiple tables for text search
I am able to create the index using above link,but problem accured , when i search for one master data column value then it is returning many rows with same master data for each child row.
for example
SELECT
a.conc_program_name,
a.conc_program_desc,
b.param_name
FROM a_master a, b_child b
WHERE b.report_dtls_id = a.report_id
AND CONTAINS (a.dummy, 'PAY') > 0
Which retruns
PAY Master A
PAY Master B
PAY Master C
Please let me know is there any way i can restrict this to single row with concatination of child data like
PAY Master A B C
Another doubt is ,i have the column value like p_consolidation_set_id,when i give this in CONTAINS (a.dummy, 'p_consolidation_set_id') > 0 ,then not able to get the any results.
please let me what shall i do for this issue.
Thanks
Message was edited by:
user496798

There are various ways to concatenate the values. One nice generic solution is to use Tom Kyte's stragg function:
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:2196162600402
If p_consolidation_set_id is a variable name, not a value, then do not put quotes around it.
Message was edited by:
Barbara Boehmer

InfoProvider: infoObject (master data attribute and text)

I saw info Object of master data attribute and text in InfoProvider.
are infoObject act like a table when we do query on them.

Hi
Refer to this as down
Custome Infoobjects Tabels:
/BIC/M -- View of Master data Tables
/BIC/P -- Master data Table, Time Independent attributes
/BIC/Q -- Master data Table, Time Dependent attributes
/BIC/X -- SID Table, Time Independent
/BIC/Y -- SID Tabel, Time Dependent
/BIC/T -- Text Table
/BIC/H -- Heirarchy Table
/BIC/K -- Heirarchy SID Table
Standard Infoobjects Tabels(Buss. Content):
Replace "C" with "0" in above tables.
Ex: /BI0/M -- View of Master data Tables

Master data and text

hi ,
I have a Info Object (IO) called AA.
This AA has a Compounding Character CostCenter and Controlling Area.
I have created my own extractors in the R/3 side seperately for Attribute and Text.
When i pull in the Attr and Text extractor :
they both form 2 diff rows / records in the MAster data Table.
And i am hoping to get the attr and the descript in the same line.(that s the normal way -rigth ??)
Is it Due to Compounding ??
If so In the Transfer Structure for Text,
I have linked Costcenter , AA and AA's description.
Thanks,
GG

Hi GG,
When creating a compoundig infoobject at the database level system with create a table with Compounding primary keys. IN this example we have COSTCENTER, CONTROLLING AREA AND AA as a Compunding primary Key. So we need to see that the Text and Attributes loaded with same keys (ie COSTCENTER, CONTROLLING AREA AND AA) otherwise will be shown as two diff records.
Ex: Attr
COSTC     CA    AA         attr
1000000 1000   10001       Attr1
Text
AA      Text
10001    text1
will be shown as diff records because these two have diff primary keys.
Let me know if you need more info.
Regards,
Varma

How are attributes and texts for a master data linked and targeted to ...?

Our previous consultants used to load data to master data 0MATL_GROUP.
1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
Check these above two and find the records loaded are both 1,216 for Language EN.
We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR. However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 2: Through InfoSource 0MATERIAL_ATTR. However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR. InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
2. InfoObj. 0MATL_GROUP
1). Master data tab (/BI0/PMATL_GROUP): 526
2). Text table (/BI0/TMATL_GROUP):
1657 (includes both EN and other lan-guages), for EN: 1190.
3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
Our questions are:
1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
both have counts of 1,216 for Language EN. And for the four branches in the data flow, only 3rd and 4th branches feed data to it. 3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data. Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526? it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
We would be appreciated any expert input!

Kevin,
can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
Analyze the data from step by step from r/3 to BW for each level. You will get clue.
Nagesh.
Message was edited by: Nagesh Ganisetti

Master Data Text and Attributes

Guys,
I read some posts on sdn regarding differences between master data texts and attributes and now I am a little confused. I thought attributes define a char. then what does text do? Does it not define or describe the char as well? If both are doing the same thing then why do we need both ? I am not sure if my understanding is correct. Please help me.
Thanks,
RG

Hi Ram,
To understand in a better way little bit of R/3 work would have been helpful.
In R/3 Every entity has master data maintained like customer, material, plant etc.
If you would see a customer in R/3 you can see it has lots of information..like address,telephone number,street company name, etc.
And along with it we have customer name...i.e. description..(text)
Now in R/3...text tables are generally maintained separately then master data tables...it can be together as well.
Something like for you Ram Goswami is descrption(text) for the user ID XXXXXXX in SDN.
Email ID and company name is the master data stored here for him.
BW has used the same modelling concept to keep the text table separate from the msater data table.
It creates to separate data target for master data and text so that two seperate tables can be maintained in BW and you have to load the data in both to see the master as well as text.
Since we have separate master data table and text table in R/3 therefore we have separate data sources as well based on them.
You would like to have you master data table exactly as the master data table of R/3 so you will add attributes in the infoobject 0customer and it will create a P table for 0customer...keep adding attributes to make the columns in the table and to make the exact copy of R/3 table i.e. to bring all the information from R/3 about customer master you add attributes in the 0customer.The data soiurce based on this table in R/3 will contain the fields from the table.
Now you do the mappings with fields between infoobject and data source and load the data ...so master data is loaded.
For text...once you check the text option in infoobject..SAP creates a new table Tcustomer in the background..
Now you have to do the mappings for this as well through the data source based on the text table in R/3.
In some cases the master data table contains text as well and in that case you use the same data source based on this table to create two separate update rules one for master data object and another one for text object and do the mappings accordingly.
In this case you schedule the load to both the target at the same time and data gets loaded.
but for different data sources you will have to schedule the load separately.
Once data loaded for this...now you can use it in the report and see the text as well as master data attributes in the reports and there values.
I hope that was more then enough
Thanks
Ajeet

How can we delete SID table data and Text table data

Hi,
How can we delete SID table data and Text table data of any
InfoObject.

Hi,
Go to transaction SE14, give the technical name if the table:
/BIC/T<InfoObject Name> for Text Table
/BIC/S<InfoObject Name> for SID Table
Select "Table" in the given 4 options below & hit Edit button.
in the next screen select "Direct"
& also select "detele data" radio button.
& hit "Activate & adjust database".
this will delete the complete data from the tables.
Note: before deleting the SID's make sure of the consequences & after effects.
Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
Regards,
Iliyas

Master and Text Flags in Table

Similar Messages

Maybe you are looking for