Master Batch change for serial number in stock with status "ESTO" by IQ02

Hi,
How to change master batch for serial number in stock with status "ESTO" by IQ02 transaction?

Hi Harsh,
if this field is not ready for input you have set the stock check to '02 Error' in your serial number profile in order to ensure
consistency between the stock data of serial numbers and inventorymanagement.
In this case you have to do a material movement posting inMB11 with movement type 309 (material to material). Enter the new batch as batch of the receiving material. This movement will update both the master batch and the stock batch of the serial number.
Regards,
Mauro

Similar Messages

Master batch change through IQ02 for serial number in stock

Hi,
How to change Master batch through IQ02 for serial number in stock & status "ESTO"
Thanks,
Harsh

Hi Harsh,
if this field is not ready for input you have set the stock check to '02 Error' in your serial number profile in order to ensure
consistency between the stock data of serial numbers and inventorymanagement.
In this case you have to do a material movement posting inMB11 with movement type 309 (material to material). Enter the new batch as batch of the receiving material. This movement will update both the master batch and the stock batch of the serial number.
Regards,
Mauro

Serial number wise stock and Ageing

We want to develop the stock report serial number wise and it should have the ageing based on the receipt date.
Please provide T code or table for serial number wise stock.
Please provide valuable inputs

Check IQ09, Copy program RIEQUI21 of IQ09 & develop report applying your logic of ageing based on dates with the help of Abalper.

IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA

Hello All,
We use batch management for serialized materials only at our central plant. For all other plants, there is no batch control. Sometimes we need to return materials back to the central plant but with a different batch number.
When we do two step stock transfer 303 / 305, we receive the following error message if we don't use the original batch number.
"IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA".
However, when we use one step plant to plant stock transfer 301, there is no error message. The batch number is also updated correctly in IQ02.
I wonder if there is any configuration to use 303 / 305 with different batch numbers.
Thanks,
Hakan

Thanks Arminda.
64044 recommends to use 309 to change the batch, which works but this is an additional step.
Currently 1 step plant to plant transfer i.e. 301 doesn't require this additional step. It updates the batch information with no problem.
Is there any configuration option to change the behavior of 305, so that we don't have to do an additional movement?

Change UUT serial Number with Single Pass in Batch model

How do I change the UUT serial Numbers with Single Pass in Batch model ?
I also like to change the UUT report path, so that each UUT saved in it's own directory.
TIA
George Zou
http://webspace.webring.com/people/og/gtoolbox

the path to the UUT report can be configured in the report options.
You can't specify unique path for each UUT in the report options.
Both report path and UUT serial number are stored in the sequence context during execution. So if you want to know where those variables are located (in order to change their values during runtime), you can set a breakboint in your sequence, change to the variabels tab and do a search for the variables (you perharps have to play around a bit with the searchstring though).
I've already find the place where TestStand holds the information. The problem is that there is no proper callback I can override.
I can only change the serial number in my sequence file. But that is too late to include the serail number in the report file name. The serial number inside the report does get changed.
By the way, I can't change the process model. User wants out of box batch model.
Thanks for reply.
George
Message Edited by zou on 06-19-2008 08:40 AM
Message Edited by zou on 06-19-2008 08:43 AM
George Zou
http://webspace.webring.com/people/og/gtoolbox

Log changes of Serial number change in sales order

Hello Experts,
The change documents does not log changes to serial number for an item.
So far i found that there is standard change document object for sales order i.e. VERKBELEG
Is there a way to add new table to existing object.
Or how can i achieve this.
Best Regards
Rajat

Hello Adriano
Not fully sure about your requirement.
But you can definitely assign Serial numbers to sales order items by selecting the item and choosing menu path Extras/Technical objects.
Firstly you have to set up the Serial Number Profile ( T Code OIS2) or use the standard delivered ones GG00/GG01. Both have the Serialization Procedure SDAU - Serial numbers in SD order and in case of GG00, the serial numbers are assigned automatically. I am not sure how automatic assignment works but you can test it. Of course, you need to specify the Profile in the material master to use the functionality.
Hope this helps.

Create Inspection Lot for Serial Number

Hello,
Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
Or is that any other way to do this???
Thanks in advance.
BMO

Atul,
The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
Possible exception:
If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
Thanks,
BMO.

Can we change equipment serial number

I have very basic question.
We are creating Equipment Master automatically for every maerial-serial number combincation during is Good Receipt. Ther serial number is assigned manually or auto generated during Goods Receipt.
Now we would like to change the serial number but without changing the equipment number.
How can we do this?

I got the answer.
Thanks.

Batch Management and serial Number Management

Hi Friends,
I have a an issue.
We are using Batch management and serial number for few materials.
While selecting F4 for checking available batch numbers and serial numbers during issues , transfer posting,stock transfer etc.., system dispalys all Batches/Serial numbers which are created for that particular material. i.e all Batches and serial numbers irrespective of whether there are stocks available , whether they are cancelled/deleted will appear in the list
Our requirement is when F4 is selected system should list only live/existing batch numbers and serial numbers of that particular material.
Can any one help us
Thx
Deva

Hi Ramesh,
Thanks for your input.
However my requirement is instead of going to separate T.code IQ09 , user wants to list the existing Batch/Ser no details while selecting F4 during issues
Thx
Deva

How do I change the Serial Number in Logic Studio?

Hi All,
I used a friends copy of Logic Studio and the serial number to give Logic Studio a try, loved it, and bought it. However now I have my own serial number and would like to enter it into Logic. Logic, of course, has kept the first serial number and I can not work out how to change the serial number. Any help would be greatly appreciated.
Cheers,
Power2004

Thanks John,
I have looked for the /Library/Application Support/ProApps folder and it does not seem to be on the HD. I also searched for the file to be trashed and could not find it. Could it be called something else in Logic Studio 8?
Cheers,

In base component when user change the serial number we need to set date time in Extra attribute filed

HI Team,
In ibase component when user change the serial number we need to set date time in Extra attribute filed..if we click edit ,User change serial number after save we need to set date time in Extra Attribute 4 field .
Component - PRDGENSET
In this component there is no attributes,so where we need to implement and how to implement please help.
Thanks
kalpana

Hi Abi,
Thanks for your reply..see i debugged..i have put break point in method SET_S_STRUCT method if press enter in serial number ,debuggeris triggered..in SET_S_STRUCT method value getting serial number..so how to write the logic here...
In GET_S_STRUCT method iam getting all attributes but serial number is not filled..So could you please help here what to do..
in set_S_STRCUT method value iam gettin serial number...in collection wrapper iam geting zrealtions if i open attributes_ref -if i pass Attribute value in run time its getting displayed.so how to write the logic based on serial number please help some coding.
Thanks
kalpana

Problem on forms for serial number generation with last record next_record.

Hi Experts,
currently i'm facing one problem like :
i'm populating one receipt detail in Multi block , like when user key in one receipt number that time record should go in first record ,and if they key in second receipt number then record should go in second record . mean to say every time record go in last record ..but the problem is i want to generate Serial no correspondence to every last record ..
here is my approch :
cursor c1 is
select * from table
where cname =:blk_name.clm_name.
Last record;
next_record;
for v1 in c1 loop
processed record;
next_record;
end loop;
last_record;
go_block(___);
first_record;
:sno := system.cursor_record ;
next_reocrd;
end loop;
first_record;
And in block level i'm writing code for Serial number generation when user key in manual entry for receipt detail:
:blk_name.coulumn_name := :system. cursor_record;
so in this approach their is no problem it is working properly but the problem is that
when user fetch one receipt automatically and then after he want to enter next record manually and he decided to go in detail block ,
and once he reached in detail block that time block level trigger i firing .ans serial number 2 generated and then suddenly he came to know no i want to fetch next record automatically mean to say now user going again master block and fetching next receipt detail ,
but the problem is when user leaving seccond sr no and going in master block and population next receipt detail that time cursor going on 3 record
but logically have to replace the second Serial no and generate the again serial number 2 record population .mean to say its not refreshing last_record..
so i'm appreciating is anyone if came accoross this type of issue please corrrect my code and send updated code ..plsssssssssssssssssssssssssssssss
Thanks
Abhishek
[email protected]

hi
I put this below code on when_new_record_instance on block level..
:blk_name.column_name :=system.cursor_record;
so can you please help me.....
Thanks
Abhishek

Lightroom 3 asks for serial number launching in non-admin account

The following information was provided by Carey Burgess (Adobe Employee):
Does Lightroom 3 launch and work fine in an admin account, but when you launch the application in a standard (i.e. non-admin) account it asks for a serial number?
If so, then it is likely due to a file permissions issue either in the original (admin) account or with the standard account.
(Although you need administrator access to install Lightroom, and you do need proper access permissions to your photos, you should be able to run Lightroom without issue in a standard user account.)
Lightroom 3 stores registration data (the serial number) in a file called Lightroom 3.0 Registration, which is stored by default in one of these locations:
    * Mac OS: /Library/Application Support/Adobe/Lightroom
    * Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Lightroom
    * Windows 7/Vista: C:\ProgramData\Adobe\Lightroom
- Check for the registration file in the appropriate location for your system.
If the file does not exist in that location, then ensure you are logged in with the admin account (the one where Lightroom doesn't prompt for a serial number) and check the user-specific location instead:
    * Mac OS: /Users/YOUR USER NAME/Library/Application Support/Adobe/Lightroom
    * Windows XP: C:\Documents and Settings\YOUR USER NAME\Application Data\Adobe\Lightroom
    * Windows 7/Vista: C:\Users\YOUR USER NAME\AppData\Roaming\Adobe\Lightroom
If the file exists in the user-specific location instead, then I would suggest that you ensure that you have quit Lightroom, and then move the registration file from the user location to the default system-wide location. Lightroom should now no longer prompt for serial number when you open it from a non-admin account.
If the registration file did (or now does) exist in the default system-wide location, but you are still being prompted to enter a serial number when opening Lightroom in a standard user account, then that account does not have sufficient access permission to the registration file.
To resolve this aspect, there are two possible solutions (the first being the recommended solution):
1. Change the access permissions on the Lightroom folder that contains the registration file to grant "Read" access for the standard user account. (You can do this for each account individually, or you can use a broader group like Everyone.)
For more information about changing permissions, see one of these articles:
    * Windows XP: http://support.microsoft.com/kb/308419#4
    * Windows Vista/Windows 7: http://windows.microsoft.com/en-us/windows7/What-are-permissions
    * Mac OS: http://docs.info.apple.com/article.html?path=Mac/10.6/en/8342.html
2. Copy the registration file from the system-wide location to the user-specific location for the standard user account. (You would need to repeat this step for each standard user that needs access to Lightroom.)
Reply here if these steps do not resolve your issue, or if you have any questions.

Months ago, I had a routine clearout of old software boxes etc and chucked out my Lightroom 1.0 box. A couple of weeks ago I reinstalled Lion on my mac to find that I cannot register Lightroom. I have the 3.0 upgrade serial, the 2.0 upgrade serial, but the 1.0 was on the box..
I followed the instructions above to find the files in crashplan form before the fomat that hold the registration details. I have tried placing them in the location described, but it doesn't seem to work.
The serials (or something) are in the file, but given in the string that is difficult to decipher - and doesn't work in the registration screen, wrong size and a mix of letters and numbers rather than just numbers as my 3.0 serial is.
Any suggestions for what I could do? Could I send the strings in to Adobe to be deciphered? Perhaps move files around a bit more?
Thanks in advance,
Rog.

Why doesn't pop-up window for serial number open?

My mother has bought the Lightroom 5 CD and is installing it but for some reason when she clicks ther installed Lr icon as told in your instruction, the serial number is not requested. The whole window with the empty boxes for serial number does not appear. I'm not sure what she has done earlier but she is saying she hasn't been able to give any serial number to her Mac (she has had earlier version in other MAc but is facing major problems with this new Mac and Lightroom, she has had trial version in this Mac). So, could the problem be that she has removed some Adobe Acrobat reader, Java, Adobe ActiveX or something and that's why the pop up window for serial number does not appear or has she managed to activate something which is blocking something or if she has already put serial number somewhere could that be blocking the process? How to change the serial number? Does Lightroom require some other sw like cloud or sth?

Hi Sari,
Kindly try the below mentioned steps.
Launch Lightroom
Click on Help.
Click on Lightroom Registration
Follow the on screen instruction.
Thanks,
Atul Saini

Mass change of Serial number

Hi SAP Gurus,
I have a Requirement to change the serial number / Material in huge numbers. Is there any way to change the Material / Serial number in mass maintanence functionality? Please let me know any other functionality.
Regards,
Senthil

Hi,
Goto the Transacion code MM17 and check the Table MARC and the fiel SERNP
and now click on Execute icon and execute it.
Maintain the MATERIALS for which you want to UPDATE the serial number profile.
Please try this and let me knowif you have any more queries.
regards,
santosh

Master Batch change for serial number in stock with status "ESTO" by IQ02

Similar Messages

Maybe you are looking for