Master Cost Centre - create and assign (steps required)

Hi All,
I am currently working on a IDES system. I want to create and assign Master Cost Centre. Please help me in providing the steps to create and assign the same.
Regards,
Chinmay

Hi Chinmay,
Cost Center creation is done by FI Team as that comes under FI module and lot of the other things need to be done. If you just want to create Cost Center you can go to
Financials -> Controlling (CO) -> Cost Center Accounting -> Master Data -> Cost Centers -> Create Cost Centers
Tcode for Creating Cost Center is KS01 and for changing KS02
You also need to Activate Cost Center Accounting in Controlling Area
Financials -> Controlling (CO) -> Cost Center Accounting -> Activate Cost Center Accounting in Controlling Area table V_TKA01_GD
For assigning cost center to employee, you can assign it in IT0001 whihc is the master cost center and IT0027 where you can assign overriding cost center
Hope the information will be helpful
guds

Similar Messages

  • BAPI for cost centre create/change

    Hi,
    Is there a BAPI for Cost centre create and change?
    Thanks in advance.
    Regards,
    Arun Mohan

    Hi Ravi,
    My system is 4.6B.
    I found BAPI_COSTCENTER_CREATEMULTIPLE,
    but the BAPI for CC change is not present.
    Is there any other BAPI for CC change?
    Arun

  • Steps to create and assign new cost centers?

    Dear all,
    Pls share with me the steps to create and assign new cost centers.
    TIA
    kogi

    Refer to the following link, will help you with the cost Center creation.
    http://help.sap.com/saphelp_470/helpdata/en/08/5145cc43b511d182b30000e829fbfe/frameset.htm
    It is actually the job of Fi consultants.
    Post your e-mail ID I will send some documentation.
    Regards
    AK
    Reward points if helpful

  • Defferece between cost centre and Master Cost Centre

    Can any body explain defferece between cost centre and Master Cost Centre.
    Appreciate your help.
    Kavitha

    Hi kavitha
                     I dont think there is difference between Cost centre and master Cost Centre.
    It may be Possible that under Cost Centre Hirarchy One Cost Centre is at Top node and other is Child of that Cost Centre.
    Thank YOu.
    Thank YOU.

  • Master cost centre assignment

    What do you mean by Master Cost Centre in SAP HR. Is it related to Organisational structure inanyway? Does the consultant have to configure it ?

    Hi Ravi,
    Master cost center flows from OM to the employee if there is integration with PA.
    In case if there is no integration with PA, then you can directly assign the Cost center to the employee in IT 0001.
    Atul Ajmera

  • Need a bapi which creates and assigns notification to maintenance order

    Hi,
       I am currently using a bapi "BAPI_ALM_ORDER_MAINTAIN" in PM  to create an order with its operations. Now my requirement is to create and assign a notification to certain types of orders. This bapi is not able to handle notifications.
    Thanks
    Pradeep

    Hi Karthikeyan,
    Since this issue is resolved long back I don't remember everything related to it. But as far as I remember, the behavior of transaction IW32 is such that, while saving the work order, it cross checks with table T350. If field "NOTDAT" in T350 is checked for that order type  then it automatically creates a notification and assigns to that order. I just made use of this behavior and used BDC approach to solve this issue.
    Hope the things are clear.
    Regards,
    Pradeep.

  • Reg: How to create and assign jco in xcm (CRM 5.0)

    Hi All,
    I have configured CRM 5.0 on Win/SQL.
    I am in the process of configuring IPC 5.0.
    I have made the cnahges as per the config. guide for IPC.
    I have to do some settings in XCM.
    For which I have to create and assign JCO in XCM.
    Which I am not able to do so.
    Please do advice and help.
    Rgs
    Vikas

    Vikas
    Good. I  will support you to my level best !!!
    <b>Assumption: U have the Admin User Id /Pass</b>
    The URL should look similar to this :http://<host>:53500/isauseradm/admin/xcm/configTreeSelect.do
    1. On the Left Panel, Select
        <b>Start --> Components --> Customer --> JCO</b>
    2. Now give the name of the JCO Customer component configuration and press ENTER
    3. Meanwhile Collect the Details of the SAP CRM 5.0 Server (<b>Client no,lang EN, System Nu,AS Host</b>)
    4. Pucth in the Appropriate details at the Properties requested in the JCO Property. Go with <b>group_connect</b> in <b>Base Configration</b> prperty
    5. <b>Save</b> the Config
    6. Press <b>TEST RUN button</b> for testing the JCO connection
       REsult will be:  <b>GREEN for Succesful Connection
                        RED for unSuccessful Connection</b>
    Hope this helps !!!
    Thanks
    Jack
    <b>Allot points if my post helps !!!!</b>
    Message was edited by: Jack

  • How to create and assign role

    Dear all,
    I want to create the role and assign.
    kindly let me know
    shailesh

    Please have a look at below link. It explains how to create and assign content ( roles, iveiws) in Portal
    http://help.sap.com/bp_epv170/EP_US/BBLibrary/documentation/N04_BB_InstallGuide_EN_US.doc
    Kindly assign points if helpful
    Regards
    Jayesh

  • Difference between master cost centre and sender cost centre

    Hi All,
    could you please tell the difference between master and sender cost centre.
    I want this information very urgent.
    Thanks rakesh

    Hi!
    The master CT is a default Ct in your system.
    In this case the logical pair for master is the "child" cost center -> primary and secondary cost centers..
    The sender CT is a different thing logically -> this will be credited while posting. The sender is the one who claims money.
    To this type the logical pair is the receiver cost center. While posting the receivers cost center will be debited.
    Hope this helps!
    Best regards,
    Zsolt

  • Get Cost Centre from runtime - WS20000050 Step 372

    I am using Workflow WS20000050 for approval of travel expenses
    When i attach the standard rule to step 372 it works fine
    I have created a Custom rule and want to attach to Step 372
    I need Cost Centre data for processing and finding out the agent
    How can i get the Cost Centre data (entered through PR05 TCode)
    I see that the standard function module uses these macros
      swc_get_element ac_container 'ORG_OBJECT' org_object.
      swc_get_element ac_container 'OTYPE' org_type.
      swc_get_element ac_container 'OBJID' org_id.
    I am not able to identify the parameter for Cost Centre. It should be a table because one claim can have more than one cost centres assigned to it. it is stored in table PTRV_SCOS

    Hi Sriram,
    If you know that the table PTRV_SCOS stores the value of cost center, then you can write a custom  BO method to fetch the value of the cost center from this table.
    Make a call to this BO method in your workflow and fetch the value in the workflow.
    Regards,
    Saumya

  • Create and assign substitution

    Hi,
    Can anyone tell me how to define substitution via user-exists and how to assign the substitution to controlling area T001 via Financial Accounting (New) ->General Ledger Accounting (New) ->Tools ->Validation/Substitution -> Substitution of Profit Centers in Customer Orders -> Assign Substitution Rules.

    Hi Venkatesh,
    Thanks for your reply.
    substitution logic.
    The substitution look all relevant information and look for an entry in the Z-tables:
    -     DATAB / DATBI
    -> look up sy-date (system date). sy-date should be between DATAB and DATBI
    -     KOKRS          
    ->is available in VBAK, so should be available in an internal table at the moment of substitution. If not, look-up via sales organization  company code  controlling area     
    -     Z_SOL_CODE  (solution code)
    ->the solution code will be available on each sales order line as a partner function: partner function u2018ZSu2019
    ->from solution code, look-up solution grouping in ZF_SOL_MAPPING
    -     Z_MACRO_SEG     (macro segment)
    -> the macro segment needs to be looked-up from the sold-to part of the sales order  in the customer master  (menu) additional data  Attribute 1 (field BRSCH)
    Based on the above logic, the system needs to look-up the correct profit center in substitution table.
    1.I will copy the include  RGGBS000 into a Z include and put my exit in that include.How to update the include name in T80D table.
    2. Through SPRO I will create a substitution and the step containing prerequisites and substitutions.
    How can I include the above substitution logic in the substitution field and what needs to be filled in the prerequisites field.
    Where can I do the coding for the exit mentioned in the  zinclude program and how is this zinclude related to substistution.
    Please reply

  • Create and assign new user in SRM org struct when HR Distribution is active

    Hello experts,
    In SRM HR Distribution list is active.
    Now requirement is we want to create new user in SRM and assign it with the SRM Org structure.
    1.)Do i need to create a user in SRM and in ECC HR i mean in both the system or in ECC-HR only.?
    2.)When user is there in ECC-HR system then how i can assign user to SRM Org structure. Is there any FM or Standarrd Program ?
    Thanks!!
    Sunny

    Hello Sunny,
    As you mentioned HR distribution is active hence you need to create the user in ECC environment and assign it to the org. structure in ECC.
    Again there would be few user which you would create in SRM evironment and those would be administator specific.
    Activating pointers for HRMD_ABA message allows to replicate all changes made to the organizational structure in HR to SRM.
    Changes in HR structure include modifications (add/modify/delete) in the following:
    u2022  Organizations
    u2022  Jobs
    u2022  Positions
    u2022  Employees
    A change in the relationship of any of the elements above will also be replicated to SRM. For instance, an employee changing units will be reflected in SRM.
    Pre-requisite: SU01D ID should exist prior to replicating the concerned user in SRM.
    Thanks,
    Yatin

  • Master cost centre

    What is thee need of assigning mastr cost centre in Organizational Structure..? How is it done? What are the requirements?

    Hi Prajakta,
    It looks like you are posting in an incorrect space. This is the University Alliances Community Student Union.
    Cheers,
    Diem

  • Create and assign roles

    Hi Experts,
    How to Crete and Assign roles to users? i need to work on this? please explain on this which T_codes we need.
    I need step by step process.
    Thanks in advance
    David

    Hi,
    You can create roles in the PFCG transaction. Check the below link. It contains the step by step procedure for creating roles.
    http://help.sap.com/saphelp_46c/helpdata/EN/52/6714a9439b11d1896f0000e8322d00/frameset.htm
    Hope this will help.
    -Jaimin

  • Master slides I created and saved as a theme won't work

    I've created a set of Master Slides for Keynote and saved the file as a .kth file per the Help function in Keynote. However, whenever I try to use them (apply a theme to a slide) I get this message when I try to edit the slide: "The object you are trying to select can only be edited in the master slide." Apparently I've done something wrong.....but what?
    Any help would be greatly appreciated.

    Hello Roccitygem,
    Since this forum is specifically for questions pertaining to our Illustrator getting started project, I am going to move this question to the main Illustrator forum after I post my reply, where you'll have a much better chance at getting assistance.
    Thank you,
    Ed Sullivan

Maybe you are looking for