Master data abt sid table

hi friends,
i ahve some doubts abt generating sid table with master data, according to external star schema when we will activate master data only , sid will be generate automatically, actually i created info object, i switch off with master data and text after activationg my info object its still showing sid table from char info object also.
if i activate with master data then only its need to show, why its showing now.please mail me.
Thanking u
suneel.

why if i will activate info object its showing master data?
the system defaults all the Io's as msterdata objects, you need to go the masterdata/texts tab - uncheck the check box for both with masterdata and with texts.
Even though you dont have any attributes available for a IO, but still the IO would be created to hold some values as a part of either transaction data or just masterdata values for that IO. If you load transaction data for the Zobject you created, the system would populate the corresponding fields in the Stable, by assigning SID;s to the values that have been populated thru transaction data. So every IO will have a Stable, eventhough it might or might not have corresponding master data.

Similar Messages

QM action not allowed for DTP requests in master data and Text tables

Hi,
I have a master data object load request which has failed, returned error in st22 and job finished.
BUT the request has not turned red in the monitor - it's still yellow. That means that I can not delete request nor start new load to infoprovider because it believes a request is still running. But it's not, I've checked both sm37, sm50 etc.
When trying to manually change QM status to 'red' it says 'QM action not allowed for DTP requests in master data and Text tables'
How can I force QM status to red so that I can move on?
Running NW2004s BI (7.0) Patch 15.
I searched for this question but there is no answer
Thank you

Folks
I know how frustrating this problem is even in netweaver 7.0 environment. I found a solution for this problem atlast and it works but a not direct way of resolving this issue.
When this request is in yellow status and not able to change / delete the request, its actually in a pseudo status and it is a bug in the program. This request sits in table RSBKREQUEST with processing type as 5 in data elements USTATE, TSTATE and this 5 is actually "Active" status which is obviously wrong.
All we need is, ask your basis person to change the status to 3 in both these data elements and then it allows to reload the delta. Once the delta is successfully loaded, you can delete the previous bad request even though it is still in yellow. Once the request is deleted, the request status gets updated as "4" in table RSBKREQUEST.
Hope this helps.
Thanks

'Master data type User table cannot add row'-DTW error

Hi All,
I am creating a template for user define Master data table from DTW, when i am trying to port data by using that template through DTW. it is giving error like--'Master data type User table cannot add row'
So can any one have solution for this.
Regard's
Hari

Hari,
Please see SAP Note 1234690 on the SAP PartnerEdge Portal. This seems like a similar problem although the example is using the Business One SDK which uses the DI API. The DTW also uses the DI API ... so there may be a relation.
You may want to check the latest patch level for SAP Business One 2007A as the note says it is a known issue.
Eddy

Deleting data from SID Table

Hi,
I have deleted master data of an info object but it does not remove all the data from the SID table.
I have selected with SID's option but not all data was removed.
I am getting the error below when transporting
"SID Table /BIC/ S2QKHITIND Contains Data : Characteristic ZQKHITIND Cannot be activated. "
What needs to be done to get the charecteristic activated.
Thanks
James

Hi Selva,
Thank you for the info. I have deleted data from all the infoproviders but still get the message
The system is unable to delete all the master data as, because some of it is still in use. (See log:
Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
What does this mean. is it due to the query open in some place or something else.
While I am not able to delete the SID table entries as the delete is not active. Please help.
Thanks
James

Reg: Master Data Attribute SID issue

Hi,
In 0MATERIAL i found some inconsistency in the P & X tables for reference SIDs, when i check the data at info cube by selecting a nav attribute of 0material then it is showing wrong data. I tried to check the consistency of this object at RSRV by selecting combined master data test then i found the below log
Characteristic 0MATERIAL: 144,290 values from table /BI0/PMATERIAL do not exist in table /BI0/XMATERIAL
Characteristic 0MATERIAL : Tables /BI0/PMATERIAL, /BI0/XMATERIAL are not consistent: 144,290 deviation(s)
Any inputs regarding this issue will be appreciated.
Thanks in advance.
Prabhakar.

Hi,
I tried to repair the error from there, but after doing so the same error was getting displayed.
Even i have checked the number range also, it was ok.
Any more suggestions.
Regards,
Prabhakar.

Master data : T077Y (Polled Table extarction )

Hi Guys,
I want to extract the Master Data Attributes (Account group and Account Group Name) from T077Y Table in ECC and bring it to BI, I use generic datasource using RSO2 it is not allowing me to create it and saying u201CExtraction from pool tables and cluster tables is not permitted (Message no. RJ037)u201D
T077Y is a polled table, Extraction from pool tables and cluster tables is not permitted.
Whatu2019s the best way the extract the Master Data attributes from this table T077Y,
     1. SAP Query
     2. Function Module
Whatu2019s the step by step for SAP Query.
Thanks and best regards
Ilyaebi

Hi,
You can go for any of these methods,
In case of FM based extraction you will have to write some ABAP code to fetch the data, but that kind of coding is not required in SAP query based extraction.
Check the below given step by step guide,
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/9018e4f3-5537-2e10-238e-ef06d9ab31e8]
Regards,
Durgesh.

Master Data R/3 Tables

What are the R/3 Master Data Tables for the below objects?
1)Accounts
2)Order
3)Cost Center
4)Profit Center
5)Company Code

Hi,
Tcodes
1)Accounts > FS00
2)Order > KO02
3)Cost Center > KS02
4)Profit Center > KE52
5)Company Code > IMG > Enterprise Structure > Definition > Financial Accounting > Define company
6)Cost element
 - table CSKA, CSKB, text table CSKU
- tcode KA02
Hope this helps.
Cheers,
Gimmo

Guidance for getting material master data from database table

Hi,
I need guidance to fetch following Material master data from the system data base.Please guide me for the same.
BASIC DATA1
BASIC DATA2
MRP1,2,3,4
WORK SCHEDULING
QUALITY MANAGEMENT
ACCOUNTING1
ACCOUNTING2
COSTING1,2
PURCHASING
PURCHASE ORDER TEXTSALES ORG1,2
SALES GENERAL/PLANT
PLANT DATA/STOR.1,2
WAREHOUSE MGMNT1,2
Also please tell me in general what is the reason for error while uploading the data into system using BAPi(AM talking about return message error).
Thank you.
Edited by: sanu debu on Feb 24, 2009 12:41 PM
Edited by: sanu debu on Feb 24, 2009 12:42 PM

Use BAPI's
BAPI_MATERIAL_GET_DETAIL
BAPI_MATERIAL_GETALL
BAPI_MATERIAL_GET_ALL

ADF Faces Query Panel: How to display master data in detail table?

Before stating the question, here is the background:
I've a Fusion ADF (model/viewController) app that includes 2 tables with a master-detail relationship. The master table stores error numbers and associated levels of logging severity; the detail table stores the actual message text. These need to be separate, related tables because the requirement is that message text for a given error number can vary by product release.
Messages are added in a bounded task flow; data for the master table entered in 1 fragment, data for the detail table in a 2nd page fragment. In the app, the Entity Objects for these tables are related with a foreign key association and have a composition association. This was done because the error numbers are generated in an Oracle DB sequence, and from what i have read that is a way in a task flow to have ADF put the number generated for the master table into the related key of the child table.
The question is this:
I need to create an ADF query panel with a table that searches on the detail DB table. However, i also need to use a couple of fields from the master DB table in both the query and in the ADF table. In addition, I need to add the ability for the user to edit either the master or detail record for the row he/she selects in the ADF table. I know how to create a view that would display the info i need; however, i have not been able to figure out how to obtain the keys for the selected ADF table row and pass them to the task flows that would edit.
The master table has a numeric primary key. The detail table primary key consists of a foreign key to the master key and also a release number.
I'm new to ADF and have been struggling with how to do this: i've a workaround that is functional but too klunky to be a permanent solution. So, could someone point me to some information on how to accomplish this?
Versions: JDeveloper 11.1.1.4, ADF Business Components 11.1.1.59.23
Thanks for your help!

Thanks. I tried this out, but ran into an issue in that the detail table has 2 keys - a foreign key to the master primary key, and a 2nd key that uniquely distinguishes the detail. So i tried various things centered around using the SetCurrentRowWithKey operation and trying to obtain the selected ADF table row using an EL OF #{data.<pageDef>.<Iterator>.currentRowKeyString}; however i could not get the detail record for the selected row to display.
I did find another approach that worked - I am wondering, is there anything problematic with this approach?:
1. Create a VO joining the Master and Detail tables, with the Detail table being updatable.
2. Made sure the applicable attributes were defined as keys.
3. Add a query panel w/table using this VO.
4. Create an ADF form based on the VO, showing the updatable fields.
5. Create a bounded task flow with the following set on the Behavior tab:
a. Share data controls with calling task flow
b. Always Begin Transaction
I specifically am wondering whether "Share data controls with calling task flow" has any negative implications or gotchas to handle. The doc at http://download.oracle.com/docs/cd/E21764_01/web.1111/b31974/taskflows_parameters.htm#ADFFD1693 doesn't suggest so, but just wanted to double-check before I go down this path.

BAPI to upload master data in multiple tables

Dear all,
Is there any BAPI to update the multiple database tables at a time? I want to update the client data into MARA, A108, KNOP and KNOH tables.
Is there any other procedure to do it? Pleae give me some suggestions to do it.
Thank You In advance..!
Regards,
Praveen

For custom defined field use EXTENSIIONIN table in Tables section of BAPI. Below is the description of that table. Check the long text (green button after short text) available to learn more about it.
Short Text
Reference Structure for BAPI Parameters EXTENSIONIN/EXTENSIONOUT
Description
You use this structure to transfer the material's customer-defined fields. For information on transferring these fields, see the function module documentation.
I doubt if there is any BAPI for T023T. In that case you need to use BDC

How to design Master datas?? Whats is Time Scenarios???Explain..

How to design Master datas?? Whats is Time Scenarios???
Can anybody explain about Time Scenarios???

Hi..
to tell it is huge ..
but a slice of it
Design Create design documents
Prod. Make the product
Quality Confirm quality of product
Sales - Market the product
Purchase Procure the items
Accounts To control the cost of Mfg
These steps should be understood as a general approach. To what extent they must be carried out depends
on the actual situation and the experience of the project members involved.
After deciding on the business process being dealt with, the basic steps to implementing a BI based solution
are:
1. Focus on the structure of information
Develop a complete understanding of the underlying business processes. Create an Entity Relationship
Model (ERM) of the business process
The ERM as a function of the information
2. Focus on analytical needs - Overcome model complexity
Create a valid data model. Translate the ERM to the Multi-Dimensional Model (MDM) / Star schema
The MDM as a function of the analytical processing
3. Build the solution as a part of an integrated data warehouse
The Star schema on the BI stage are the InfoCubes. Translate the MDM / Star schema to one or more
InfoCube.
coming to time ..
How real-world changes are dealt with, i.e. how the different time aspects are handled is the most
important topic with data warehouses.
The attributes of a characteristic that will reside in its master data table are determined in the modeling
phase. Each attribute can be defined individually as being time dependent:
There is one time dependent check box for each attribute in the attribute tab page section.
Time dependency of an attribute allows you to keep track on the changes over time of the relation of the
characteristic and the time dependent attribute values.
In terms of technical implementation, two master data tables exist if we have both non-time dependent
and time dependent attributes.
One master data table stores all relations to non-time dependent attributes (name of the table:
/BIC/P<InfoObject name>) and
One table stores relations to time dependent attributes (name of the table: /BIC/Q<InfoObject
name>).
The time dependent attributes master data table has additional DATETO and DATEFROM system
attributes. In queries the different constellations are addressed using the key date ( Query properties).
The validity attributes are not available for navigation.
The text table, or better the description attributes, may be defined as time dependent.
SID tables with respect to master data:
The SID table is always generated if an InfoObject is not defined as attribute only (tab page general).
This table is used if the access to an Infocube or DataStore Object uses a navigational attribute or if the
access is via a characteristic without attributes. Name of the table: /BIC/S<InfoObject name>
The non-time dependent attribute SID table of a characteristic for access via non-time dependent
attributes. Name of the table: /BIC/X<InfoObject name>
The time dependent attribute SID table of a characteristic for access via time dependent attributes.
Name of the table: /BIC/Y<InfoObject name>
with regards,
hari kv

Mismatch between Master data table /BIC/P and SID table /BIC/S

Hello All,
in our master data table we have logsys in key
after a system copy we had a problem with logsys name, when we have copied our bw prod system in test system we find prod logsys like value, the BDLS doesn't change all values for all structures and some master data table still have prod logsys instead of test logsys but some records have test logsys values
for example:
our production logsys is: BIP300 and our test logsys is BIT300
in our master data test table we find had some records logsys value like BIP300 and others with BIT300
all our ODS and CUBE have the right logsys value in test "BIT300"
we have developed an ABAP report to execute on selected tables to change logsys from BIP300 to BIT300
we execute the report on only P master data table like /BIC/PZCOOR and it's work fine and has changed all the records values
from BIP300 to BIT300 and this program has eliminated all duplicate records
the problem is when on our master data try to view data we find that bw return data from SID table /BIC/SZCOOR
in fact if we go to control data on /BIC/SZCOOR table we find that there still are records with logsys BIP300 and BIT300
and the same if we execute our query on ZCOOR we have values with BIP300 and BIT300
how should we fix this problem?
if we execute our ABAP report on /BIC/SZCOOR to change logsysname we can fix that or we could have problem?
please can give me some useful help
thanks a lot
Bilal

Hi ,
Follow the sequence of deletion .
1.Delete data from cube YMM_*
2.Delete data from 0pur_c*
3.Delete data from 0material .
4.Delete data from info_rec .
Best option would be do selective deletion for these four materials and run a repair request then after to update into data target.
Hope that helps.
Regards
Mr Kapadia

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Deletion of master data with / without SID

Hi Experts,
Client have requested for master data clean up.
Requirement:
"Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted"
Steps to be taken:
1. emptied/deleted content of all the cube.
2. delete data from master data
Help required:
What will be impact of deleting master data with SID when DSO data is not deleted.
What if i choose without SID option for deletiing master data
Regards
Suresh Kumar

Hi Suresh,
Deleting master data is one critical job and ned to be very care ful.
First try to find out the where used list of that particular IO. delete data from all the CUBEs and DSOs. i don't think without deleting the transaction data from all the objects that you see from where used list, you will be able to delete the maste data.
System doesn't allow you, it will say "Not all selected data is deleted" Some message of this sort when you try deleting the master data.
If you are deleting the TD and master data, why do you need the SID to be spared, delete them too. next time you load the correct master data. the SIDs are again generated.
Go thru the below thread, this gives you lot if info on MD deletion.
[Re: SID Tables]

Master Data Background Tables

Hi Xpertz
Could any one tell me the answer to the following sorry to asking this silly question in Sdn .After a long time just i am
reviewing my basics i got alittle confussion in the following
what r the master data back ground tables i know that P,Q,M,X.tell me what is the difference between thez tables.
If any docs please send it to the following id : [email protected]
Any answer will appreciate
Thanx In advance
Best regards
R K
**NO need to say good answers will get full pointz*****

Hi,
In fact, do you really need to know the names of these master data tables? The same for the tables of a cube...
SAP BW will generate these tables for you, depending of your settings. An attribute is time dependant, then SAP BW creates a table to store at least that attribute with Dateto and Datefrom. One other is time dependant AND navigational. Then SAP BW will generate another table.
Your texts are language and/or time dependant, then again SAP BW will do its job.
Same for the cubes.
In 5 years of BW consulting and training, I checked only once the technical settings of a cube, because a full extract of that cube (containing only one request) was generating less rows in a backup cube (completely similar).
And I could learn that the key of the fact table of a cube is not unique when you run SAP BW under ORACLE.
But, once again, I could have let it beside, because the results were good, the backup was correct, and I investigated only because I was curious.
So, do you really need to know them by heart?
Regards,
Laurent

Master data abt sid table

Similar Messages

Maybe you are looking for