Master Data Attr not showing in query

Hi SDNs
Iam having some queries in Bex built by previous developer. We recently enhanced customer master by three fields. When I wanted to add it in queries, I can only able to see those address fields in one query rest of 5 queries are not showing the new enhanced attributes.in fact I cant see any attribute (eg: 0sold_to has 20 attributes but its just showing 0country as the attr) I dont know why the rest are not showing. Also, when I tried to create a new query, I can able to see all the attributes for 0sold_to , 0ship_to etc...but the existing query doesnt showing the attributes ? Does any body know why the attributes are not shwoing in current query / do i need to uncheck something / unhide something in Bex for the existing query...I want to add the new fields only in existing query,I dont want to create a new one...
Thanks

Hi Sam,
If you go to the report and do Change query global definition then you should be able to see the new attributes on the left side of the query designer and then you drag and drop them on the right side. If your attributes are navigational then you will have to turn them on as navigational in the Cube/DSO too, then only you can see them in the query.
Regards,
Nikhil

Similar Messages

All master data values not shown in query selections

Hi
I have created a query on a BasisCube containing the InfoObject 0FUNC_AREA. I loaded data to 0FUNC_AREA and the cube.
I then created a query on the cube, in which I want to filter on 0FUNC_AREA. However, when I get the list of available values for 0FUNC_AREA not all the values in the master data is shown. It only shows 25 values out of 105.
As a default, the data shown is only the cube data, so I removed the tick in the checkbox: Show only InfoCube data. Still the same.
Then I went to the InfoObject and set the 'Query Def. Filter Value Selection' and 'Query Execution Filter Val. Selectn' equal to 'Values in Master Data'. Still the same.
Then I deleted the contents of the InfoCube. It still shows the original 25 values.
The really strange thing is, that when I go into the selection screen for 0FUNC_AREA in the BEx and limit the shown values to one of the values available in the master data but not shown in the list, it shows the text of the functional area in the limit summary window. But still when executing the limitation, it cannot find the value!!!
The problem is the same in LISTCUBE
I hope some of you can help we with this.
Thanks
/Karsten

Hi Hari
1) Reactivated the master data, said it was already active.
2) Could see a difference between the data contained in cube and the remaining data. Otherwise not.
I deleted cube and master data and reloaded, the problem still persists. I am beginning to suspect a bug in BW.
I have to determine whether I am going to live with it (as it isn't critical, just a nuisance) or create an OSS on it.
Thanks for all the input guys.
/Karsten

Master Data Attributes not showing in InfoCube

Hi Experts,
I'm a little lost here. I have loaded the master data for a field ZPARTY(data coming from 3 non-SAP sources S1, S2 and S3) with all its attributes. I have actovated it and I see it as well in the BEx.
Now I have loaded related Transaction data and and I have ZPARTY in that InfoCube as well. Now I can see the attibutes showing up in InfoCube from S1 and S2 but not from S3.
I have deleted the data and reloaded it as well. I made sure that the SIDS get generated as well and I can see SIDs as well but I do not see the data from S1 for the master data attributes.

Hi,
You can check the following things,
1) In the infoobject maintainance screen on the attributes tab, just check that attributes coming from S3 are marked as Navigation attributes.
2) Check whether they are time dependent or independent attributes.
3) Once you load all the data check it in master data view of ZPARTY infoobject and make sure that all the data is active.
4) If you are not able to see the data loaded then check the underlying mappings of infoobject from S3 to ZPARTY in transformation or transfer rule.
5) Finally in infocube check that you have marked all the navigation attributes available for reporting.
Regards,
Durgesh.

Master Data is not showing for 0Customer info obeject in the portal

Hi Experts,
I'm facing an issue with 0CUSTOMER Info object. When I tried to execute the query from Query designer(BI 7.0) it is not showing all the customers in filter for 0CUSTOMER in WEB but it is showing all values for other characteristics(i.e 0MATERIAL).
I tried to execute same query in Bex Analyser and RSRT but it is showing all the customers list in filter for 0CUSTOMER. I have this problem in WEB only
Please suggest me why 0CUSTOMER is not showing all the values in WEB.
Thanks,
Jaypal

in WEB, all values wont be displayed in single page if the list is too long, There will be a button to navigate to the next page and select. Please check that.

Master Data(texts) not displayed in Query/Analyser

Hi ALL,
I hv master Data's like Cost center,Cost element,vendor,Customer, for which the data is displayed only as key and no text is displayed,even though i hv selected key and text option,,also i hv checked their corresponding master datas,,i c that all the data has been loaded respectively.
Please advice on how to solve this...asap
Thanks

Goto RSA1 and double click on the infoobject.
Goto the Business Explorer Tab and make the Display Option as Key and Text.

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Master data attr./text/hier. loading

According to best practice for Headcount and Personnel Actions( 0PA_C01), we have to do several process after infocube activation. e.g. active Query, query view, and loading transaction data.
The question is when should we load master data attr./text/hier. ? Why does SAP do not put it on the best practice document?

Hi,
You should always load Master data before transactional data. This helps in loading transactional data faster as the SID tables are already populated once you load the master data and helps master data load performance. Make sure that the loaded master data is followed by an attribute change run always as if this step is not executed, the loaded master data will not take effect.
Also in terms of reporting, if any users are accessing the queries and master data is missing at that point of time (might be loaded later), then the reports for those characteristics are going to show up as # (not assigned) and make no sense for reporting.
If the referential integrity box is checked during transactional data load, the loads will fail if relevant master data is not loaded first.
So, always load master data first, followed by attribute change run and then load the transactional data.
Cheers,
Kedar

"Master data attr. of" un change source of update rule.

hi,
What is the importance of following in "change source" (characteristics) in update rules.
1. master data attr. of
2.initial value
3. Source chars
4. constant
When and why these are used.
Thanks in advance.
Regards,
Avneet

Hi Avneet,
Lets say Material group is an attribute of 0MATERIAL. You cube contains Material and also Material Group as a separate characteristic (not as navigational attr) becasue you want to store the value of material group as it was during the time the transaction happened.
But here you transactional data coming from the source brings Material values, not values of Material Group. So in the update rule for Material Group, you can specify "Master data attribute of" 0MATERIAL. What the system will do is take the value of 0MATERIAL on this record and populate Material Group taking the value that is present in Material Master data.
So if Material = M100 and Material Group is MG01 in master data, it will supply MG01 to Material Group char in the cube.
Hope this helps...

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Impact on transactional Loads if Master data is not loaded

Scenario for your reference:
The loads to ZPO_LINE from PC3 was failing for past 20 days from The fix was applied on April 21.
I need help to decide the effects of not loading ZPO_LINE for past 20 days. And create a detailed plan for data loads required.
If the master data is not loaded for 20 days will it affect the transaction loads happened during those days?
And how can i find out the impact and correct the transaction data if it does?
Can any 1 help me with this?

Hi,
If i understand your scenario, you have a scenario where the Master data load has not been updated for the last 20days but, the transaction data was loaded without any interruption.
In such a scenario, the Transactional loads will only be affected if there is some field which undergoes transformation after looking up on the master data.
So, first load the master data and run the attrib change run process.
After this, if the transaction data is in full update mode, then you dont need to do anything as data will be refreshed with correct values in the next load.
If delta loads are there, you might need to performa full repair.
Regards,
Rahul

Time of email shows in Date Column, Date is not showing on new emails

Date is not showing in Date column. Only time is showing.
I just migrated from OE - Old emails show the time & Date.

If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

Due date is not showing up in UWL

Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
Mark

Hi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

Master Data Attr not showing in query

Similar Messages

Maybe you are looking for