Master data attribute change run error

hi all,
plz tell me the procedure to overcome the masterdata attribute change run error.plz explain me with steps clearly
thanks in advance,
jack

Hi Jack,
The process of Attribute change run is just the activation of the Master data same as DSO's.
In RSA1>tools>Apply Hierarchy/Attribute change run(CRTL+F9). You can check your object for which the attribute change run has to be applied through the infoobject list.
Then execute. now the attribute change run is completed.
Please ensure the infoobject is activated.
Provide us the error message to give you more details.
Regards,
Ravi

Similar Messages

Error while realigning aggregates through master data attr. change run

Hi all,
We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
"Error while procesing aggregate <aggregate technical name>"
From ST22 we can find
Database error text........: "ORA-14400: inserted partition key does not map to any partition"
Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
Whereas from SM21 we can find out:
Database error 14400 at INS access to table /BIC/F200009.
/BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
Thnaks,
Abhishek.

Hi Jogeswara Rao Kavala,
When I am pressing back or NO option it is showing error like this
What is this OK- Code means?
how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
Sunil Boya

Attribute change run error in daily job (BI 7.0 SP 23)

Hi All,
We are facing an Attribute Change Run error in one of our daily batch job.we donnot see any locks in SM12.and a dump occurs in ST22.we also donnot have any master data load running at that time .We executed the the FM RSDDS_AGGR_MOD_CLOSE,but the Change run error occurs frequently .How to get the root cause of this issue as we donnot have any master data load running at that time.
regards,
maria

If you are sure that your master data is 0MATERIAL then GOTO-RSA1>Tools in Top>Select Attribute Hiearchy Change Run>Select Info Object List>Select 0MATERIAL>Execute.Then message "Attribute/Hierarchy change run scheduled" will appear in the Tab on your User ID.Once its finished your masterdata is activated.
For Activate Master Data we can do another method like "Right click on the particular Infoobject which need to activate and click "Activate Master Data".
The above steps is for manual activation of master data changes..
If you want to automaize the above steps "Need to add Attribute/Hierarchy Change Run" in the process chain.When execution of Processchain it will activate all the master data in the list one by one and also realign the Aggregates which using the master data objects.

Master data without change run

Hello Gurus,
our data flow for sap bw is " sap datasource>PSA>infoprovider for some infoobject-->OHS ", our purpose is to extract data from sap datasource and send it to external data warehouse through OHS. but I found for some infoobject, after loaded with data, without change run, then directly transfer to external data warehouse through OHS. I know master data is not activated without change run. but does it make sense for my scenario without change run before sending data out?
Many thanks

Hi,
You don't have to include attribute change run after every master Data load. This has to done only when ever you do some changes to master Data viz. adding attributes or deleting attributes and so on.
Check with the business if the master dta is changing on frequent basis.
Check below links:
[Re: Change Run after every master data load?;
[Question on Attribute change run;

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

Attribute Change Run" process cannot precede process "Execute InfoPackage

hi all,
i have changed process chain, after changing the chain i have click the check button and activated. then iam getting this error
A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_C0BVLUDKPEPXGXFMHQ67RFI9L in the chain.
please help me out
thanks advance
sudheer.

Hi,
Your process chain shud have the following sequence:
Start Process> Loading of master data> AND process (if u have multiple master loads)-->Attribute Change Run
And all the linkages between the processes shud only be "SUCCESSFUL". Create new variants for all processes you enter in your process chain.
Check you chain before you activate. If it gives you exlamatory sign, the also u can go ahead with activation as it is giving u just the warnings.....
Hope it'll help u.......
Preet

Process chain best practice - attribute change runs

When building attribute change runs into Process Chains I see that there are potentially two main options to consider:
1. One to One mapping. Incorporate a separate attribute change run object type after each InfoObject has been loaded.
2. Many to One mapping. Build the process chain so that one single attribute change run occurs after all the InfoObjects have been loaded.
I would be interested to see how other people have incorporated their attribute loading into Process Chains.
any info appreciated.
Mike

We run the attribute change run twice in our daily process chain, here's our order:
- Load all master data
- Attrib change run
- Load all tx data
- Run ABAP programs that generate master data
- Attrib change run
I doubt there will be much of a performance difference if you do the change run after each master data load, but it makes the process chain a lot easier to read.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

How does attribute change run works for Aggregates and Master data?

Hi
Can anybody xplain how does the attribute change run works for Master data ?
For e.g.
There is 0spelling and it has master data
On Day 1 there are 10 records
day 2 it has 12 records
so with attribute change run this 2 new records will get added....
The values for this 12 records will added seperately in Data load
Is this how it workss
So how about Aggregates which has Master data.????

for e.g.
u have 0spelling whicha has attributes x,y and z on day 1 with 10 records
so do ur aggregates on day1 with same values
now on day2 u had new values of attributes y,z,s,d and new hierarchies and so u add new records
with data load u will load the data with version M of modified and is not available for reporting
If u do attribute change run then this modified version is activated to A i.e. active version .
It will also do the change run alignment for Aggregate for new attribute values and new hierarchy values for aggregate.
now in order for this data to be available for reporting u will need to do the roll up of aggregate.....
if u roll up aggregate before attribute change run , new data is not avaialable for reporting
if u roll up aggregate after attribute change run, then data is available for reporting
if u dont roll up aggregate eventhough new data is in dataprovider, still new data will not be available for reporting.
this is how it works

Aggregates with Attribute Change Run and Master data

Hi !
I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
It also contains navigational attribute and hierarchy...
Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
So just Rolling up aggregate will not help.
We need to apply Attribute Change run for this purpose, to aggregates..
Now the question is HOW TO APPLY ATTRIBUTE CHANGE RUN to aggregates?
How to automate this process with Process chains..?
If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ? Yes or No..........
(What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
Please reply asap ? its urgent

hi,
check these links for attribute change run
What's the attribute change run? and the common sequence of a process chain
http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
regards
harikrishna N

Attribute Change Run VS Master data activation

hello guys
I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
Thanks and Regards
S

Hi S,
Although they seem to be the same there are differences.
Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
The 2nd function, is that it realligns the aggregates for the changed attributes
let me give you an example.
You have an aggregate based on material group which is an aggregate of material.
Consider that you have a material X which initial belonged to group A.
The aggregate would look like this
Material Material Group Keyfigure
X A 100
Now you change the material group of the same material as B
The aggregate would not change automatically....ie it would still be X A 100
To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
X B 100
Hope this helps.
Regards.

Abt master data activation and attribute change run

There is any difference between master data activation and attribute change run

Hi,
Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
For attribute change run we have direct tcode: RSATTR or In the main menu, choose the path Tools Hierarchy/Attribute Change.
regards
KP

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

Lock NOT set for: Loading master data attributes error

Hi experts,
We were encountering this error before when trying to load master data. When we checked the system we could not find any locks at the time, and activation or kicking off the attribute change run failed again. We finally solved the problem running FM RSDDS_AGGR_MOD_CLOSE which sets the close flag to 'X' in table RSDDAGGRMODSTATE. I have read that it is possible this lock error happens when two change runs happen at the same time.
My question are:
1. is it possible to find out what process exactly "caused" the lock? the table RSDDAGGRMODSTATE does not have a reference to any object or job. I am curious as we are trying to find ways to avoid this in the future...
2. in our case, when we could not find any locks, is running this fm the only work around? is this a best practice?
mark
Message was edited by:
Mark Siongco
Message was edited by:
Mark Siongco

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Master data attribute change run error

Similar Messages

Maybe you are looking for