Master data attributes with direct update...its very urgent

Hi all,
Could anyone tell me how to laod the master data attributes with direct update in the infopackge..
provide steps to create master data attributes and how to load..
Thanks,
Manjula

Hi Manjula,
Flexible Uploading
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used
honor with points if this helps,
Sudhakar

Similar Messages

Master data attributes declaration in update rules

Hi Everyone,
can any one tell me, How do we use attributes of master data in update rules..need syntax for using attributes of customer.... like comm_structure-/bic/......etc
post code is attribute of customer, How do I use it in update rule
thanks
Siri

Hi!
if you have customer as attribute in your Infosource and Postcode as acharecteristic in your data target then you just need to select ther 3rd type of update rule "MAster data attribute of" and specifxy 0Cusotomer beside
with regards
ashwin

How to use Master Data Attribute of in Update Rule's Formula

Hi experts.
In update rule, there is an option to use <b>Master Data Attribute of</b>. However, due to user requirement, I need to use that in <b>Formula</b> instead.
<b>Field to update:</b>
Profit Center
<b>Logic:</b>
If Cost Center is empty
Then Profit Center
Else
Master Data Attribute of Cost Center
I use the following formula at the moment but it is not 100% correct.
<b>IF( Cost Center = '', Profit Center, Cost Center )</b>
Appreciate if anyone could help me out.
Thanks!

Hi,
The easier thing to do will be to use a Update Routine.
Logic will be as follows :-
If Cost center iss initial.
Result = Profit Center
else.
result = Cost center.
endif.
Regards
SM

Load Master data attribute with Text Data (Urgent Please)

Hello Experts,
I created a new navigational attribute to one of the master data object and now I want to load that particular new navigational Attribute from the Master data Text (Medium description).
In brief, I need first 4 letter of master data text (medium description) to load in to the navigational attribute. How
How is this possible? Can you please help me to get it solved.
Thanks and Regards,
Harish Mulaka

Hi Apparrao,
Add this attribute to your infoobject's attributes list.
Make sure it comes in the communication structure for the infoobject.
Then in the transfer rules write a routine. You will have to read the text table to get the medium text(field TXTMD) and pull the 4 characters from the beginning and populate your new attribute.
Do a full load and run the attrbute change run.
Hope that helps.
Regards.

Delete data dynamically with JSP and servlet (Very Urgent)

Hi,
I am new with servlets and JSP. On my jsp page I am populating customer names in a drop box from database and I have 3 buttons ADD, DELETE and EDIT.
Now when I press DELETE buttong I am calling delete function which is writen in Javascript on my jsp file only,now I want to pass these selcted values ehich I have stored in an array to be pass to servlet,so I can write Delete query for it and delete.
Could anyone help with sample code>
Here what I am trying to say:
<HTML>
<HEAD>
<script language="JavaScript" type="text/javascript">

</script>
</HEAD>
<BODY>
//calling servlet on action tag of form
<FORM METHOD= 'POST' ACTION='Remove_Customer'>
<form ><INPUT TYPE='submit' NAME='DELETE' VALUE='DELETE' onclick="remove()"></TD></form>
<form><INPUT TYPE='submit' NAME='MODIFY' VALUE='MODIFY' onclick="modification()" ></TD></form>
</BODY>
</HTML>
PLEASE HELPME,it's very urgent.
Since the selected Array is in javascrip language , I don't know how can I pass that to servlet.
request.getParameter is not working,since it's an array
Many thanks in Advance.

Hey,
I am having problem deleting multiple values.
If I just select one value,it deletes it
But for multiple values the code is not working right.
If there 2 values selcted then the last value gets deleted,if there are more than 2 values selected none values delete.
Could plese check the code,and let meknow what mistake am I doing?
Please help
String delName="";
int pos = tStr.indexOf(",");
System.out.println(pos);
     if (pos != -1)
               delName = tStr.substring(0, tStr.indexOf(","));
          tStr = tStr.substring(tStr.indexOf(",") + 1 );
               System.out.println("DElName:"+delName);
               System.out.println("tStr::"+tStr);
                    delName = tStr;
                    delete_Customer(delName);
Thanks
ASH

Printing Problem With Wipro Printer its very urgent

hi ,
i have developed the smartform which contain page format of size height DINA4 .when i am giving print in wipro dot printer it is printing in correct postion in first page but in next page it displaying below the postion what i am given .plz tell me how to solve the problem.
Edited by: srinivas peram on Mar 29, 2008 7:00 AM

Hi,
If you are using front end printing then try just by changing the device types it would work.Also check your printer settings at your end.
Regards,
Vamshi.

Error handling for master data with direct update

Hi guys,
For master data with flexible update, error handling can be defined in InfoPackege, and if the load is performed via PSA there are several options - clear so far. But what about direct update...
But my specific question is: If an erroneous record (e.g invalid characters) occur in a master data load using direct update, this will set the request to red. But what does this mean in terms of what happens to the other records of the request (which are correct) are they written to the master data tables, so that they can be present once the masterdata is activated, or are nothing written to masterdata tables if a single record is erroneous???
Many thanks,
/ Christian

Hi Christian -
Difference between flexible upload & Direct upload is that direct upload does not have Update Rules, direct upload will have PSA as usual & you can do testing in PSA.
second part when you load master data - if error occurs all the records for that request no will be status error so activation will not have any impact on it i.e. no new records from failed load will be available.
hope it helps
regards
Vikash

Characteristics - Master data Tab- infosource with direct update

Dear Experts,
Please explain me in Laymans Language as i am new to BI (but am an ABAP consultant).
In Info Object Characteristics, Master data Tab there is infosource with direct update with an application Component.
1. Now my doubt is, when i specify the Application Component, this infosource would appear under the application component in Modeling->Infosources.
Then on this infosource i would right click and create the info pakage and then data transfer process.
is it correct?
2. Suppose for this characteristic if i dont specify the infosource with direct update then it wont appear in the infosource, so how can i load data in this case?
Regards
BI Learner

Hi,
Using an InfoSource with direct updating, master data (characteristics with attributes, texts, or hierarchies) of an InfoObject can be updated directly (without update rules, only using transfer rules) into the master data table. To do this you must assign it an application component. The system displays the characteristic in the InfoSource tree in the Data Warehousing Workbench. You can assign DataSources and source systems to the characteristic from there. You can then also load master data, texts, and hierarchies for the characteristic.
You cannot use an InfoObject as an InfoSource with direct updating if:
i. The characteristic you want to modify is characteristic 0SOURSYSTEM (source system ID).
ii. The characteristic has neither master data nor texts nor hierarchies. It is therefore impossible to load data for the characteristic.
iii. The characteristic that you want to modify turns out not to be a characteristic, but a unit or a key figure.
To generate an export DataSource for a characteristic, the characteristic must also be an InfoSource with direct updating.
1. *Now my doubt is, when i specify the Application Component, this infosource would appear under the application component in Modeling->Infosources.
Then on this infosource i would right click and create the info pakage and then data transfer process.*
The characteristic will be available in info source tree, you can assign a datasource->assignsource system->create package->load data.
2. Suppose for this characteristic if i dont specify the infosource with direct update then it wont appear in the infosource, so how can i load data in this case?
For a characteristic If you dont specify 'InfoSources with Direct Updating' then it wont appear in infosource tree.

Map My Update Rule from a Master Data Attribute

Hello experts,
I haven't tried this scenario yet, hope you can help me, the Issue is this
I have 2 InfoObjects ZPSCHRCHY and 0PROFIT_CTR from InfoCube WBS cost and allocations I want both the InfoObjects to be mapped to 0PROFIT_CTR attribute of 0WBS_ELEMT master data object, I have tried the Master Data Attribute but only 0PROFIT_CTR is an attribute of the Master Data.how can I mapped ZPSCHRCHY and 0PROFIT_CTR to 0PROFIT_CTR?, Is creating a start routine for it must be used? Thank you very much
Regards and Thanks
Chris

PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TYPES:
BEGIN OF r_MD_WBS_ELEMENT,
   WBS_ELEMT like /BI0/PWBS_ELEMT-WBS_ELEMT,
   OBJVERS    like /BI0/PWBS_ELEMT-OBJVERS,
   PROFIT_CTR like /BI0/PWBS_ELEMT-PROFIT_CTR,
END of r_MD_WBS_ELEMENT.
DATA: t_MD_WBS_ELEMENT TYPE STANDARD TABLE OF r_MD_WBS_ELEMENT,
       wa_MD_WBS_ELEMENT TYPE r_MD_WBS_ELEMENT.
$$ end of global - insert your declaration only before this line   -
The follow definition is new in the BW3.x
TYPES:
BEGIN OF DATA_PACKAGE_STRUCTURE.
     INCLUDE STRUCTURE /BIC/CS8ZPSG030.
TYPES:
     RECNO   LIKE sy-tabix,
END OF DATA_PACKAGE_STRUCTURE.
DATA:
DATA_PACKAGE TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
FORM startup
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
           MONITOR_RECNO STRUCTURE RSMONITORS " monitoring with record n
           DATA_PACKAGE STRUCTURE DATA_PACKAGE
USING    RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
REFRESH: t_MD_WBS_ELEMENT.
      SELECT WBS_ELEMT
             OBJVERS
             PROFIT_CTR
      INTO TABLE t_MD_WBS_ELEMENT
      FROM /BI0/PWBS_ELEMT
   FOR ALL ENTRIES IN DATA_PACKAGE
     WHERE WBS_ELEMT   = DATA_PACKAGE-WBS_ELEMT.
    IF sy-subrc EQ 0.
    Do nothing
    ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.

Using "Master Data Attribute of" in the Update Rule

Hi,
In my update rule of, i want to replace the master data attribute of my characteristic instead of using its source characteristic. For example. <i>InfoObject ZSTORECODE</i> has an attribute <i>ZSTORENAME</i>. My objective is to use the Store Name instead of a Store Code.
I initially thought of using <i>"Master Data Attribute of"</i> in the update rules. However, I always end of with having an error of <i>"No Values."
</i>
Hope you guys can help me with this!
Thanks,
Raomon

DATA: V_NSTC_SN2,
V_KFC_COSTC LIKE RSGENERAL-CHAVL.
V_KFC_COSTC = DATA_PACKAGE-KFC_COSTC.
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
    EXPORTING
      I_IOBJNM                      = 'KFC_COSTC'
      I_CHAVL                       = V_KFC_COSTC
*   I_T_CHAVL                     =
*   I_DATE                        =
*   I_FLG_WHOLE_TABLE             =
      I_ATTRNM                      = 'NSTC_SN2'
IMPORTING
*   E_STRUCTURE                   =
*   E_TABLE                       =
      E_ATTRVAL                     = V_NSTC_SN2
    EXCEPTIONS
      READ_ERROR                    = 1
      NO_SUCH_ATTRIBUTE             = 2
      WRONG_IMPORT_PARAMETERS       = 3
      CHAVL_NOT_FOUND               = 4
      OTHERS                        = 5
RESULT = V_NSTC_SN2.
Another Example Code:
index on infoObject

Is it possible to update master data attributes from an ODS?

HELLO ALL,
we have records coming into our ods like the following:
costcenter1, subcostcentera, subcostcenterb, manager responsible, costs (kf).
This is a custom flat file load from a legacy system.
We would like to just create an update rule from the ODS to the cost center mater data characteristic attributes.
Is this possible?
thank you

Yes its possible to update the master data attributes from an ODS.
Define your master data characteristics as a infoprovider.
Create a update rule on Characteristic with ODS as a source and do general mapping.
For step by step, pls refer..
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/business-intelligence/g-i/how%20to%20implement%20flexible%20master%20data%20staging

Can routine replace "master data attribute of" update rule for performance?

Hi all,
We are working on CRM-BW data modeling, We have to look up agent master data for agent level and position for each transaction data. So now we are using "Master data attribute of" update rule. Can we use routine instead of "Master data Attribute of" ? Will it improve the loading performance? Since we have to load 1 lack transaction records , where as we have 20,000 agent details in agent master data.My understanding is, for each record in data package the system has to go to master data table and bring the agent details & store in cubes. Say one agent created 10 transactions, then this option "master data attribute of" will read the agent master data 10 times even though we are going to pull same details for all 10 transactions from master data. if we use routine, we can pull the agent details& storing in internal table removing all duplicates and in update routine we can read the internal table.
Will this way improve performance?
let me know if you need further info?
Thanks in advance.
Arun Thangaraj

Hi,
your thinking is absolutely right!
I don't recommend to use the standard attribute derivation since it will perform a SELECT to the database for EACH record.
Better implement a sorted table in your start routine; fill it with SELECT <fields> FROM <master_data_table> FOR ALL ENTRIES OF datapak WHERE OBJVERS = 'A' etc...
In your routine perform a READ itab ... BINARY SEARCH.... I believe that you won't be able to go faster...
hope this helps...
Olivier.

Master data Attribute of ( Update rule)

Hi SDN,
I Just want to know the procedure to create update method of Master data Attribute of . coild any one tell me step by step
Regards
sujan

3.     Creation of data targets
     In left panel select info provider
     Select created info area and right click to select Insert Characteristics as info provider
     Select required info object ( Ex : Employee ID)
     Under that info object select attributes
     Right click on attributes and select create transformation.
     In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
     Activate created transformation
     Create Data transfer process (DTP) by right clicking the master data attributes
     In extraction tab specify extraction mode ( full)
     In update tab specify error handling ( request green)
     Activate DTP and in execute tab click execute button to load data in data targets.
cheers
John

Pupulating Char with Master data attribute

Hi,
I need to populate the characteristic with a master data attribute value at the tranfer rules.
Can anybody send me the code to do so.
If it is at Update rules we have the option of Master data attribute of.
But I need to do it at transfer rules.
Thanks in advance.

Hi Indira,
It is difficult to give the exact code but, here is the pseudo code:
In the start routine:
select * from /bic/m<characteristic>
into itab for all entries in datapak
where ..............
if sy-subrc = 0.
sort itab by....
endif.
In the mapping for the info object, create a routine and the following code goes in there:
read table itab with key ......
if sy-subrc = 0.
result = itab-********
endif.
Make sure you handle time dependencies if the master data attribute is time dependent.
Hope this helps.
Thanks and Regards
Subray Hegde

What exactly is Update method Master data attrib with a Time dependency ?

Hi Experts,
I have a Update rule in which i have an Update Method "Master Data Attrib of " with Time dependency
basically we are loading (update rule of )   0PAYROLL AREA ,
              at Master data attribute of we have 0EMPLOYEE
              at Time Dependency When reading Master Data END radio button is checked
              frm it is mention as 0CALDAY.
please explain what is function of 0calday here?
I understand that 0PAYROLL AREA is a attribute of 0Employee and since from R/3 we are getting only 0EMPLOYEE so we are filling it from 0employee but what is the significance of 0CALDAY here?
Regards,
RG

Hi RG,
It fills the valid value of 0PAYROLL for a particular 0EMPLOYEE in a particular time frame.
Elaboration.
Say Employee          Payroll                  Valid from          Valid to
        RG                    1000000                 01.01.2007        31.12.2007
        RG                    2000000                 01.01.2008        31.12.2008
        RG                    3000000                 01.01.2009        31.12.2009
The if your transaction data has RG employee in it with a transaction on 0CALDAY = 12.05.2007 then the valid payroll at that time would be 100000.
On Calday 05.05.2009 your payroll would be 300000.........
So for different days different payroll values would be valid.
You require calday to find out which payroll value is valid in the timeframe of a transaction.
In your update rule it is bringin the value of valid attribute value for the time of the transaction.
Hope it helps,
Regards,
Sunmit.

Master data attributes with direct update...its very urgent

Similar Messages

Maybe you are looking for